Avoid having something like this in outputs:
Before:
```
munet> r1 shi vtysh -c 'show bgp dampening damp'
BGP table version is 10, local router ID is 10.10.10.1, vrf id 0
Default local pref 100, local AS 65001
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network From Reuse Path
*d 2001:db8:1::1/128
2001:db8::2 (null) 65002 ?
*d 2001:db8:2::1/128
2001:db8::2 (null) 65002 ?
*d 2001:db8:3::1/128
2001:db8::2 (null) 65002 ?
*d 2001:db8:4::1/128
2001:db8::2 (null) 65002 ?
*d 2001:db8:5::1/128
2001:db8::2 (null) 65002 ?
Displayed 5 routes and 5 total paths
munet> r1 shi vtysh -c 'show bgp dampening flap'
BGP table version is 10, local router ID is 10.10.10.1, vrf id 0
Default local pref 100, local AS 65001
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network From Flaps Duration Reuse Path
*d 2001:db8:1::1/128
2001:db8::2 2 00:03:10 (null) 65002 ?
*d 2001:db8:2::1/128
2001:db8::2 2 00:03:10 (null) 65002 ?
*d 2001:db8:3::1/128
2001:db8::2 2 00:03:10 (null) 65002 ?
*d 2001:db8:4::1/128
2001:db8::2 2 00:03:10 (null) 65002 ?
*d 2001:db8:5::1/128
2001:db8::2 2 00:03:10 (null) 65002 ?
Displayed 5 routes and 5 total paths
```
After:
```
munet> r1 shi vtysh -c 'show bgp dampening damp '
BGP table version is 10, local router ID is 10.10.10.1, vrf id 0
Default local pref 100, local AS 65001
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network From Reuse Path
*d 2001:db8:1::1/128
2001:db8::2 00:00:00 65002 ?
*d 2001:db8:2::1/128
2001:db8::2 00:00:00 65002 ?
*d 2001:db8:3::1/128
2001:db8::2 00:00:00 65002 ?
*d 2001:db8:4::1/128
2001:db8::2 00:00:00 65002 ?
*d 2001:db8:5::1/128
2001:db8::2 00:00:00 65002 ?
Displayed 5 routes and 5 total paths
munet> r1 shi vtysh -c 'show bgp dampening flap'
BGP table version is 10, local router ID is 10.10.10.1, vrf id 0
Default local pref 100, local AS 65001
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network From Flaps Duration Reuse Path
*d 2001:db8:1::1/128
2001:db8::2 2 00:00:15 00:00:00 65002 ?
*d 2001:db8:2::1/128
2001:db8::2 2 00:00:15 00:00:00 65002 ?
*d 2001:db8:3::1/128
2001:db8::2 2 00:00:15 00:00:00 65002 ?
*d 2001:db8:4::1/128
2001:db8::2 2 00:00:15 00:00:00 65002 ?
*d 2001:db8:5::1/128
2001:db8::2 2 00:00:15 00:00:00 65002 ?
Displayed 5 routes and 5 total paths
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Add the ability to store a raw copy of the incoming BGP Link-State
attributes and to redistribute them as is to other routes.
New types of data BGP_ATTR_LS and BGP_ATTR_LS_DATA are defined.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add the "show bgp link-state link-state" following commands:
> r3# show bgp link-state link-state ?
> <cr>
> all Display the entries for all address families
> detail-routes Display detailed version of all routes
> json JavaScript Object Notation
> neighbors Detailed information on TCP and BGP neighbor connections
> regexp Display routes matching the AS path regular expression
> summary Summary of BGP neighbor status
> version Display prefixes with matching version numbers
> wide Increase table width for longer prefixes
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
BGP link-state prefixes are displayed in the form of NLRI-TYPE /
Prefix-Length.
> r2# show bgp all
>
> For address family: Link State
> BGP table version is 8, local router ID is 192.0.2.2, vrf id 0
> Default local pref 100, local AS 65002
> Network Next Hop Metric LocPrf Weight Path
> *> Link/153 0 65001 i
> *> IPv6-Prefix/77 0 65001 i
> *> IPv4-Prefix/57 0 65001 i
> *> Node/49 0 65001 i
> *> Node/45 0 65001 i
Add a lib prefix display hook in bgpd to display properly all the details.
> r2# show bgp all
>
> For address family: Link State
> BGP table version is 8, local router ID is 192.0.2.2, vrf id 0
> Default local pref 100, local AS 65002
> Network Next Hop Metric LocPrf Weight Path
> *> Link OSPFv3 ID:0xffffffffffffffff {Local {AS:4294967295 ID:4294967295 Area:4294967295 Rtr:10.10.10.11:2.2.2.2} Remote {AS:4294967295 ID:4294967295 Area:4294967295 Rtr:10.10.10.10:1.1.1.1} IPv4:10.1.0.1 Neigh-IPv4:10.1.0.2 IPv6:2001::1 Neigh-IPv6:2001::2 MT:0,2}/153
> 0 65001 i
> *> IPv6-Prefix OSPFv3 ID:0x20 {Local {AS:65001 ID:0 Area:0 Rtr:10.10.10.10} MT:2 OSPF-Route-Type:1 IPv6:12:12::12:12/128}/77
> 0 65001 i
> *> IPv4-Prefix OSPFv2 ID:0x20 {Local {AS:65001 ID:0 Area:0 Rtr:10.10.10.10:1.1.1.1} IPv4:89.10.11.0/24}/57
> 0 65001 i
> *> Node OSPFv2 ID:0x20 {Local {AS:65001 ID:0 Area:0 Rtr:10.10.10.10:1.1.1.1}}/49
> 0 65001 i
> *> Node OSPFv2 ID:0x20 {Local {AS:65001 ID:0 Area:0 Rtr:10.10.10.10}}/45
> 0 65001 i
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
When displaying the link-state prefixes with "show bgp link-state
link-state" command, the following output headers are not needed:
> Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
> i internal, r RIB-failure, S Stale, R Removed
> Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
> Origin codes: i - IGP, e - EGP, ? - incomplete
> RPKI validation codes: V valid, I invalid, N Not found
Do not display these headers for link-state SAFI.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
BGP Link-State prefixes are special prefixes that contains a lot of
data.
Extend the length of the prefix string buffer in order to display
properly this type of prefixes with the next commits.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add the ability to send link-state prefixes that are in the BGP table.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
If we modify as-path with route-map and prepend with private ASNs, then we
advertise a new as-path without stripping private ASNs. Let's fix this, and
remove private ASNs despite if they were sent by the origin or prepended locally.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
The pdest pointer is locked by the bgp_node_get so
unlocking it should be fine and it should still exist.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
dest could be freed by the first unlock, but should
not be due to our locking structure. Ensure coverity
understands this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Unsetting a flag after the dest has been possibly been
freed is not a good thing to do. Ensure that this
is not possible.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is incase it has been freed ( it wont due to locking )
and then we need to ensure that we can continue to use
the pointer.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The bgp_cleanup_routes function holds the lock for dest
while walking it. Ensure that coverity understands this
proposition.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
But never really does due to locking, but since it can
we need to treat it like it does and ensure that FRR
is not making a mistake, by using memory after it
has been freed.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
dest will not be freed due to lock but coverity does not know
that. Give it a hint. This change includes modifying bgp_dest_unlock_node
to return the dest pointer so that we can determine if we should
continue working on dest or not with an assert. Since this
is lock based we should be ok.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Modify bgp_fsm_change_status to be connection oriented and
also make the BGP_TIMER_ON and BGP_EVENT_ADD macros connection
oriented as well. Attempt to make peer_xfer_conn a bit more
understandable because, frankly it was/is confusing.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Currently evpn passes into bgp_path_info_cmp the pfx_buf
uninitialized. The bgp_path_info_cmp functionality actually
expects this value to be initialized. Additionally the
evpn section of bgp_path_info_comp was resetting the
new_buf and exist_buf values that were already being
set above to the same values if !debug was on( which
precluded it ever from happening )
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The command "show bgp all rpki notfound" includes not only RPKI
notfound routes but also RPKI valid and invalid routes in its results.
Fix the code to display only RPKI notfound routes.
Old output:
```
frr# show bgp all rpki notfound
For address family: IPv4 Unicast
BGP table version is 0, local router ID is 10.0.0.1, vrf id 0
Default local pref 100, local AS 64512
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
N x.x.x.0/18 a.a.a.a 100 0 64513 i
V y.y.y.0/19 a.a.a.a 200 0 64513 i
I z.z.z.0/16 a.a.a.a 10 0 64513 i
Displayed 3 routes and 3 total paths
```
New output:
```
frr# show bgp all rpki notfound
For address family: IPv4 Unicast
BGP table version is 0, local router ID is 10.0.0.1, vrf id 0
Default local pref 100, local AS 64512
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
N x.x.x.0/18 a.a.a.a 100 0 64513 i
Displayed 1 routes and 3 total paths
```
Signed-off-by: Ryo Nakano <ryo.z.nakano@gmail.com>
Shouldn't validate the label after 'decode_label'. If we validate
the label after 'decode_label', even the 'MPLS_INVALID_LABEL' will
be valid then.
Signed-off-by: Valerian_He <1826906282@qq.com>
This is based on @donaldsharp's work
The current code base is the struct bgp_node data structure.
The problem with this is that it creates a bunch of
extra data per route_node.
The table structure generates ‘holder’ nodes
that are never going to receive bgp routes,
and now the memory of those nodes is allocated
as if they are a full bgp_node.
After splitting up the bgp_node into bgp_dest and route_node,
the memory of ‘holder’ node which does not have any bgp data
will be allocated as the route_node, not the bgp_node,
and the memory usage is reduced.
The memory usage of BGP node will be reduced from 200B to 96B.
The total memory usage optimization of this part is ~16.00%.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Yuqing Zhao <xiaopanghu99@163.com>
The status and ostatus are a function of the `struct peer_connection`
move it into that data structure.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
