The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
When moving interfaces to an other place, like other netns, the
remaining interface is still present, with inactive status.
Now, that interface is deleted from the list, if the interface appears
on an other netns. If not, the interface is kept.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Because vrf with netns backend may be used, the correct zns must be
found prior any modifications.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
So as to get the correct NETNS where some discovery must be done and
populated, the zns pointer is directly retrieved from zvrf, instead of
checking that the VRF is a backend NETNS or not.
In the case where the interfaces are discovered before the VRF is enabled
( VRF-lite populate), then the default NS is retrieved.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
this is a static analysis performed by c-lang scan-build tool that
demonstrated this issue. This commit is handling the fix.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Upon following calls: interface poll, address poll, route poll, and
ICMPv6 handling, each new Namespace is being parsed. For that, the
socket operations need to switch from one NS to one other, to get the
necessary information.
As of now, there is a crash when dumping interfaces, through show
running-config.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
During VRF change handling, the connected route for the interface should be
installed only if the interface is up. Otherwise, we end up with duplicate
connected routes which can lead to other problems.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Ticket: CM-19364
Reviewed By: CCR-7099
Testing Done: Manual verification
There are certain interfaces that when brought up and we receive
the netlink notification about it, the speed of the interface is
not set correctly. This creates a one-shot thread that will
wait 15 seconds and then requery the speed and if it is different
it will renotify the running daemons.
The kernel should notify us on speed changes, unfortunately this
is not done currently via a netlink message as you would think.
As I understand it there is some in-fighting about the proper
way to approach this issue and due to the way the kernel release
cycle works we are a ways off from getting this fixed. This
is a `hack` to make us work correctly while we wait for the
true answer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
It is technically possible to attempt to use a NULL pointer.
Remove this from happening.
Additionally cleanup code indentation a small bit.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This improves code readability and also future-proofs our codebase
against new changes in the data structure used to store interfaces.
The FOR_ALL_INTERFACES_ADDRESSES macro was also moved to lib/ but
for now only babeld is using it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Performance tests showed that, when running on a system with a large
number of interfaces, some daemons would spend a considerable amount
of time in the if_lookup_by_index() function. Introduce a new rb-tree
to solve this problem.
With this change, we need to use the if_set_index() function whenever
we want to change the ifindex of an interface. This is necessary to
ensure that the 'ifaces_by_index' rb-tree is updated accordingly. The
return value of all insert/remove operations in the interface rb-trees
is checked to ensure that an error is logged if a corruption is
detected.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is an important optimization for users running FRR on systems with
a large number of interfaces (e.g. thousands of tunnels). Red-black
trees scale much better than sorted linked-lists and also store the
elements in an ordered way (contrary to hash tables).
This is a big patch but the interesting bits are all in lib/if.[ch].
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
list_free is occassionally being used to delete the
list and accidently not deleting all the nodes.
We keep running across this usage pattern. Let's
remove the temptation and only allow list_delete
to handle list deletion.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Convert the list_delete(struct list *) function to use
struct list **. This is to allow the list pointer to be nulled.
I keep running into uses of this list_delete function where we
forget to set the returned pointer to NULL and attempt to use
it and then experience a crash, usually after the developer
has long since left the building.
Let's make the api explicit in it setting the list pointer
to null.
Cynical Prediction: This code will expose a attempt
to use the NULL'ed list pointer in some obscure bit
of code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This fixes the broken indentation of several foreach loops throughout
the code.
From clang's documentation[1]:
ForEachMacros: A vector of macros that should be interpreted as foreach
loops instead of as function calls.
[1] http://clang.llvm.org/docs/ClangFormatStyleOptions.html
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The connected_down_ipv[4|6] functions are basically identical.
Refactor into one common interface.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The connected_up_ipv[4|6] functions were almost identical.
Combine the forces for the goodness of mankind
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Using the previously-added vty_frame() support, this gets rid of all the
pointless empty "interface XYZ" blocks that get added for any interface
that shows up in the system (e.g. dummys, tunnels, etc.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
meh. forgot to even look at the interface deletion path. this doesn't
really work well when looking for the local address in the subnet list
which has the connected prefix in it... loop ensues.
fix by using the connected prefix when looking at the list of connected
prefixes. duh.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
add a connected_check_ptp function which does the same as
connected_check, but takes an additional peer prefix argument.
also fix related prefixlen mixup in PtP addresses (the local part of a
PtP address always is /32, but previously the peer mask got copied.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Frr has an assumption that when interface A links to B,
we already know about B. But that might be true always.
It is probably purely depends on the configuration
and how the interfaces are hashed in Kernel.
FRR seems to sometimes get "A is linked to B" before it knows about B,
in that case, the linkage between the data structure for A & B won't be proper.
Ticket: CM-17679
Review: ccr-6628
Testing: Manual
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
This allows modules to register their own additional hooks on interface
creation/deletion.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This was incorrectly implemented to begin with (it only re-added routes,
but didn't remove them) and is now covered in static_ifindex_update.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Whenever an interface is created or deleted in the system, we need to
check whether we have static routes referencing that interface by name.
If so, we need to [un]install these routes.
This has the unfortunate side effect of making static routes with
non-existent interfaces disappear from "show ip route", but I think
that's acceptable (and I don't see a "good" fix for that).
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
