Add a new topotest `isis_srv6_topo1` for verifying SRv6 functionalities
in IS-IS (RFC 9352).
This topotest consists of nine tests:
* Network convergence after applying SRv6 configuration
* Disable SRv6 Locator on zebra on r1
* Enable SRv6 Locator on zebra on r1
* Disable SRv6 Locator on ISIS on r1
* Enable SRv6 Locator on ISIS on r1
* Disable SRv6 on ISIS on r1
* Enable SRv6 on ISIS on r1
* Disable SRv6 on zebra on r1
* Enable SRv6 on zebra on r1
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Update IS-IS fuzz test to match corrected output after the introduction
of SRv6-related TLVs.
The update was performed using wuschl [1] like this:
$ wuschl rebuild tests/isisd/test_fuzz_isis_tlv
$ gzip -9 tests/isisd/test_fuzz_isis_tlv_tests.h
[1] https://pypi.org/project/wuschl/
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Add CLI command and functions to configure the interface used for
installing SRv6 SIDs into Linux data plane
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
The function `sid_exist` verifies if a given SRv6 SID has already been
allocated for a given IS-IS area. This commit extends `sid_exist` to
also consider adjacency SIDs when checking for the existence of the SID.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
An SRv6 adjacency SID is a SID that is associated with a particular
adjacency. Adjacency SIDs are advertised using the SRv6 End.X SID
Sub-TLV (RFC 9352 section #8.1) or SRv6 LAN End.X SID Sub-TLV (RFC 9352
section #8.2).
This commit defines the following Adj SIDs management functions:
* srv6_endx_sid_add_single: add a new SRv6 Adjacency SID
* srv6_endx_sid_del: delete an SRv6 Adjacency SID
* isis_srv6_endx_sid_find: lookup SRv6 End.X SID by type
It also attaches some callbacks to the hooks isis_adj_state_change_hook,
isis_adj_ip_enabled_hook, isis_adj_ip_disabled_hook, which are
responsible for installing/removing an SRv6 Adjacency SID automatically
when the state of an IS-IS adjacency changes.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
An SRv6 adjacency SID is a SID that is associated with a particular
adjacency. Adjacency SIDs are advertised using the SRv6 End.X SID
Sub-TLV (RFC 9352 section #8.1) or SRv6 LAN End.X SID Sub-TLV (RFC 9352
section #8.2).
This commit defines a data structure `srv6_adjacency` for storing
information about an SRv6 Adjacency SID. This data structure will be
used to support SRv6 Adjacency SIDs functionalities in future commits.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
We need to allocate memory SRv6 SID Structure Sub-Sub-TLV in
isis_srv6.c. MTYPE_ISIS_SUBSUBTLV is statically defined in isis_tlvs.c
and therefore is not visible in isis_srv6.c. Let's make
MTYPE_ISIS_SUBSUBTLV non-static to provide visibility to the external
world..
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Extend the Extended IS Reachability TLV unpack function to unpack the
SRv6 End.X SID Sub-TLV and SRv6 LAN End.X SID Sub-TLV, if present.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Extend the Extended IS Reachability TLV pack function to pack the SRv6
End.X SID Sub-TLV and SRv6 LAN End.X SID Sub-TLV, if present.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Add SRv6 End.X SID Sub-TLV and SRv6 LAN End.X SID Sub-TLV codepoints
(defined in "IS-IS Sub-TLVs for TLVs Advertising Neighbor Information"
IANA registry). These codepoints will be used in future commits to
pack/unpack corresponding Sub-TLVs.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Extend the Extended IS Reachability TLV format function to show the SRv6
End.X SID Sub-TLV and SRv6 LAN End.X SID Sub-TLV, if present.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
SRv6 End.X SID Sub-TLV (RFC 9352 section #8.1) and SRv6 LAN End.X SID
Sub-TLV (RFC 9352 section #8.2) contain a `flag` field. Currently, three
flags are defined:
* B-Flag: Backup flag
* S-Flag: Set flag
* P-Flag: Persistent flag
This commit defines three constants representing these flags.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Extend the Extended IS Reachability TLV copy function to copy the SRv6
End.X SID Sub-TLV and SRv6 LAN End.X SID Sub-TLV, if present.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Add SRv6 End.X SID Sub-TLV and SRv6 LAN End.X SID Sub-TLV to the
Extended IS Reachability Sub-TLVs data structure and perform proper
initialization/free when the Sub-TLVs data structure is
allocated/destroyed.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Add a data structure to represent an SRv6 LAN End.X SID Sub-TLV as per
RFC 9352 section #8.2.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Add a data structure to represent an SRv6 End.X SID Sub-TLV as per
RFC 9352 section #8.1.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Add copyright claim for "IS-IS Extensions to Support SRv6" (RFC 9352)
to isis_tlvs.c and isis_tlvs.h.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
According to RFC 9352 section #5, the SRv6 Locators associated with
algorithms 0 and 1 should be also advertised in a Prefix Reachability
TLV (236 or 237) to allow legacy routers (i.e., routers that do not
support SRv6) installing a forwarding entry for algorithms 0 and 1 SRv6
traffic.
This commits extend IS-IS to advertise SRv6 Locators in IPv6
Reachability TLV.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Add a function to build an SRv6 SID Structure Sub-Sub-TLV (RFC 9352
section #9) to advertise the structure of a specific SRv6 End SID passed
as an argument.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Add a function to build an SRv6 End SID TLV (RFC 9352 section #7.2) to
advertise a specific SRv6 End SID passed as an argument.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Add a function to build an SRv6 Locator TLV (RFC 9352 section #7.1) to
advertise a specific SRv6 Locator passed as an argument.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Add a function to fill in an SRv6 SID Structure Sub-Sub-TLV with
information from an SRv6 SID (RFC 9352 section #9).
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Add a function to fill in an SRv6 End SID Sub-TLV with information from
an SRv6 End SID (RFC 9352 section #7.2).
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Add a function to fill in an SRv6 Locator TLV with information from an
SRv6 locator (RFC 9352 section #7.1).
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
General Sub-Sub-TLV processing functions (i.e., copy, format, free,
pack, and unpack) perform a lookup of the handler specific for a
Sub-Sub-TLV in the `tlv_table`, and then call the specific handler to
process the Sub-Sub-TLV.
This commit adds the handlers for the SRv6 Structure Sub-Sub-TLV (stored
in `subsubtlv_srv6_sid_structure_ops`) to the `tlv_table`.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Use the SUBSUBTLV_OPS macro to define the TLV operations for the SRv6
SID Structure Sub-Sub-TLV (RFC 9352 section #9).
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Extend generic Sub-Sub-TLVs format function to return information about
SRv6 SID Structure Sub-Sub-TLVs (RFC 9352 section #9).
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Add a function to return information about an SRv6 SID Structure
Sub-Sub-TLV (RFC 9352 section #9).
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
