Add the "n-flag-clear" option to the "segment-routing prefix"
command. The only thing that option does is to clear the node
flag of the Prefix-SID, even if it corresponds to a local loopback
address. No changes are necessary other than that in order to fully
support Anycast-SIDs. isisd already supports multiple routers
advertising the same route with the same Prefix-SID after the recent
refactoring. Clearing the node flag for such anycast routes isn't
strictly required, but failure to do so can lead to problems like
TI-LFA picking the wrong Prefix-SID when calculating repair paths.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Embed Prefix-SID information inside SPF data structures so that
Prefix-SIDs can be installed together with their associated routes
at the end of the SPF algorithm. This is different from the current
implementation where Prefix-SIDs are parsed and processed separately,
which is vastly suboptimal.
Advantages of the new code:
* No need to parse the LSPDB an additional time to detect and process
SR-related changes;
* Routes are installed with their Prefix-SID labels in the same ZAPI
message. This can prevent packet dropping for a few milliseconds
after each SPF run if there are BGP-labeled routes (e.g. L3VPN) that
recurse on IGP labeled routes;
* Much easier to support Anycast-SIDs, as the SPF code will naturally
figure out the best nexthops and use only them (that can't be done
in any reasonable way if the Prefix-SID Sub-TVLs are processed
separately);
* Less code to maintain and reduced memory footprint;
The "show isis segment-routing prefix-sids" command was removed as
it doesn't make sense anymore now that "show isis route" exists.
Prefix-SIDs are a property of routes, so what was done was to extend
the "show isis route" command with a new "prefix-sid" option that
changes the output table to show the Prefix-SID information associated
to each route.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
nhrp: Configure vici socket path using
configure --with-vici-socket=/var/run/charon.vici
If not specified default to /var/run/charon.vici
Signed-off-by: Zoran Peričić <zpericic@netst.org>
Add a command `set installable` that allows configured nexthop
groups to be treated as separate/installable objects in the RIB.
A callback needs to be implemented per daemon to handle installing
the NHG into the rib via zapi when this command is set. This
patch includes the implementation for sharpd.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
With the change of Solaris going from Supported -> UnSupported
the documentation needed to be updated to reflect the reality
on the ground.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add support for a BGP-wide setting to enter and exit graceful shutdown.
This will apply to all BGP peers across all BGP instances. Per-instance
configuration is disallowed if the BGP-wide setting is in effect.
Signed-off-by: Vivek Venkatraman <vivek@nvidia.com>
Updated the user documentation to reflect changes made to routemaps "set
metric" VTY shell command.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
a linux configuration gives some explanation on how to set up an evpn
overlay in network namespaces.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add a blurb about the rpm package server in the overview page
so its easier to know where it is. Should be with the debian
one anyway.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Enhancement to update-delay configuration to allow setting globally
rather than per-instance. Setting the update-delay is allowed either
per-vrf or globally, but not both at the same time.
Ticket: CM-31096
Signed-off-by: Don Slice <dslice@nvidia.com>
* Added an entry in the user documentation for the BGP daemon no-rib
option vty shell commands.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
1. Added isis with different vrf and it's dependecies.
2. Added new vrf leaf in yang.
3. A minor change for IF_DOWN_FROM_Z passing argrument is
replaced with ifp pointer in api "isis_if_delete_hook()".
4. Minor fix in the isisd spf unit test.
Co-authored-by: Kaushik <kaushik@niralnetworks.com>"
Signed-off-by: harios_niral <hari@niralnetworks.com>
Example configuration:
route-map SET_SR_POLICY permit 10
set sr-te color 1
!
router bgp 1
bgp router-id 1.1.1.1
neighbor 2.2.2.2 remote-as 1
neighbor 2.2.2.2 update-source lo
address-family ipv4 unicast
neighbor 2.2.2.2 next-hop-self
neighbor 2.2.2.2 route-map SET_SR_POLICY in
exit-address-family
!
!
Learned BGP routes from 2.2.2.2 are mapped to the SR-TE Policy
which is uniquely determined by the BGP nexthop (2.2.2.2 in this
case) and the SR-TE color in the route-map.
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Co-authored-by: Sebastien Merle <sebastien@netdef.org>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
Introduce the "show isis route" command to display the routes
associated to an SPF tree. Different from the "show ip route" command,
"show isis route" displays the L1 and L2 routes separately (and not
the best routes only).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Some Sphinx apis have changed over time; test the installed
version and use the apis that match the version.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The fuzzing code that is in the master branch is outdated and unused, so it
is worth to remove it to improve readablity of the code.
All the code related to the fuzzing is in the `fuzz` branch.
Signed-off-by: Jakub Urbańczyk <xthaid@gmail.com>
