Read in STP state changes for a Single Vxlan Device
via bridge vlan netlink messages. Map the vlanid to a
VNI in the SVD table and treat it similar to how
we handle proto down of the Vxlan device traditionally
in a non-SVD device scenario.
Forwarding == Interface UP
Blocking == Interface DOWN
Signed-off-by: Stephen Worley <sworley@nvidia.com>
This patch addresses following issues,
- When the VLAN-VNI mapping is configured via a map and not using
individual VXLAN interfaces, upon removal of a VNI ensure that the
remote FDB entries are uninstalled correctly.
- When VNI configuration is performed using VLAN-VNI mapping (i.e., without
individual VXLAN interfaces) and flooded traffic is handled via multicast,
the multicast group corresponding to the VNI needs to be explicitly read
from the bridge FDB. This is relevant in the case of netlink interface to
the kernel and for the scenario where a new VNI is provisioned or comes up.
Signed-off-by: Sharath Ramamurthy <sramamurthy@nvidia.com>
This change set introduces data structure changes required for multiple vlan aware bridge
functionality. A new structure zebra_l2_bridge_if encapsulates the vlan to access_bd
association of the bridge. A vlan_table hash_table is used to record each instance
of the vlan to access_bd of the bridge via zebra_l2_bridge_vlan structure.
vxlan iftype derivation: netlink attribute IFLA_VXLAN_COLLECT_METADATA is used
to derive the iftype of the vxlan device. If the attribute is present, then the
vxlan interface is treated as single vxlan device, otherwise it would default to
traditional vxlan device.
zebra_vxlan_check_readd_vtep, zebra_vxlan_dp_network_mac_add/del is modified to
be vni aware.
mac_fdb_read_for_bridge - is modified to be (vlan, bridge) aware
Signed-off-by: Sharath Ramamurthy <sramamurthy@nvidia.com>
When FRR receives a route from the kernel about the route
offload success/failure. The metric being reported is not
going to be correct since we may not know it appropriately
at this point in time. If we can set the metric to something
appropriate.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This commit implements necessary netlink encoders for traffic control
including QDISC, TCLASS and TFILTER, and adds basic dplane operations.
Co-authored-by: Stephen Worley <sworley@nvidia.com>
Signed-off-by: Siger Yang <siger.yang@outlook.com>
The recently-added hashtable of nlsock objects needs to be
thread-safe: it's accessed from the main and dplane pthreads.
Add a mutex for it, use wrapper apis when accessing it. Add
a per-OS init/terminate api so we can do init that's not
per-vrf or per-namespace.
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
Read incoming interface address change notifications in the
dplane pthread; enqueue the events to the main pthread
for processing. This is netlink-only for now - the bsd
kernel socket path remains unchanged.
Signed-off-by: Mark Stapp <mjs.ietf@gmail.com>
This action is initiated by nhrp and has been stubbed when
moving to zebra. Now, a netlink request is forged to set
the link interface of a gre interface if that gre interface
does not have already a link interface.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Instead of directly configuring the neighbor table after read from zapi
interface, a zebra dplane context is prepared to host the interface and
the family where the neighbor table is updated. Also, some other fields
are hosted: app_probes, ucast_probes, and mcast_probes. More information
on those fields can be found on ip-ntable configuration.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
neighbor table api in zebra is added. a netlink api is created for that.
the handler is called from the api defined in the previous commit.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
a zebra api is extended to offer ability to add or remove neighbor
entry from daemon. Also this extension makes possible to add neigh
entry, not only between IPs and macs, but also between IPs and NBMA IPs.
This API supports configuring ipv6/ipv4 entries with ipv4/ipv6 lladdr.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
zebra implements zebra api for configuring link layer information. that
can be an arp entry (for ipv4) or ipv6 neighbor discovery entry. This
can also be an ipv4/ipv6 entry associated to an underlay ipv4 address,
as it is used in gre point to multipoint interfaces.
this api will also be used as monitoring. an hash list is instantiated
into zebra (this is the vrf bitmap). each client interested in those entries
in a specific vrf, will listen for following messages: entries added, removed,
or who-has messages.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Multihoming support requires a new dataplane feature, MAC-ECMP, to
bridge traffic to remote ESs that are attached to more than one
active VTEP.
As a part of this support indirection has also been added via
L2-NHGs. Using a nexthop group allows for fast failover
of MAC entries when an access port attached to a remote-ES goes
down i.e. instead of updating many MAC entries this becomes a
single NHG update to the dataplane.
Note: Some of the code here needs to be reworked to the new
dataplane model.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Add all the neccessary code to allow nexthops to be processed
in separate dataplane contexts with the netlink dataplane kernel
provider.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
speed interface is done 15 seconds after interface creation. during that
time, the vrf or the interface may have disappeared. to protect this,
return an error in case it is not possible to create a vrf socket or it
is not possible to get speed of an interface because of a missing
device.
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Move neighbor programming to the dataplane; remove
old apis; remove some ifdef'd use of direct netlink
code points, using neutral values outside of the netlink-
specific files.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Make the RIB_*_ROUTE() macro which is passed a route in rib.h just use
the R*_ROUTE() macros that directly check the type in rt.h.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Start using the dataplane for interface-address programming,
on netlink platforms. Other platforms just stubbed at this
point.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
We have several route types KERNEL and CONNECT that are handled via special
case in the code. This was causing a lot of work keeping the two different
classes of route types as special(SYSTEM OR NOT). Put the dplane
in charge of the code that sets the bits for signalling route install/failure.
This greatly simplifies the code calling path and makes all route types
be handled exactly the same. Additionaly code that we want to run
post data plane install can just work as per normal then, instead
of having to know we need to run it when we have a special type
of route.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com.
The kernel neigh update api helps update neighbor entry,
using changing state and flags parameters.
Ticket:CM-22864
Reviewed By:
Testing Done:
Signed-off-by:Chirag Shah <chirag@cumulusnetworks.com>
Finish the LSP update code for the async dataplane for
the openbsd platform. Remove synch apis now that we've
converted to the async code path.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Adding infra to zebra dplane to support LSP updates. Add
kernel api for LSP updates that uses a dataplane context; add
stub apis for netlink, bsd, and 'null' kernel paths. Add
version of netlink mpls update code that takes a dplane
context struct instead of a zebra lsp struct.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
An EVPN type-2 entry is in freeze state during remote update,
remote VTEP can send typ-2 withdraw update,
upon receiving an entry delete (withdraw), first check
kernel has in local reachable state. Upon
unfreeze use the local entry to advertise to peers.
Fetch is for both MAC and IP, delete can come for
only MAC or MAC-IP combined route.
The specific entry fetch only required request flag to be set,
dump flag is not required.
Testing Done:
Simulate two VTEPs to do M1, IP1 mobility sequence,
freeze MAC during remote MAC update, subsequently send
withdraw type-2 route from origintating VTEP.
This results in read apis to invoke for local reachable entry.
Zebra updates its cache and upon unfreeze originates type-2.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Use a separate netlink socket for the dataplane's updates, to
avoid races between the dataplane pthread and the zebra main
pthread. Revise zebra shutdown so that the dataplane netlink
socket is cleaned-up later, after all shutdown-time dataplane
work has been done.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Reduce or eliminate use of global zebra_ns structs in
a couple of netlink/kernel code paths, so that those paths
can potentially be made asynch eventually.
Slide netlink_talk_info into place to remove dependency on core
zebra structs; add accessors for dplane context block
Start init of route context from zebra core re and rn structs;
start queueing and event handling for incoming route updates.
Expose netlink apis that don't rely on zebra core structs;
add parallel route-update code path using the dplane ctx;
simplest possible event loop to process queued route'
updates.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Use boolean variables instead of unsigned int for certain VxLAN-EVPN
flags which are really used as boolean.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
Ticket: CM-22288
Reviewed By: CCR-7832
Testing Done:
Along with a subsequent, related commit
When a MAC moves from local to remote, a replace is allowed, EVPN
no longer has to delete the local MAC before installing the remote
MAC.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
EVPN ND ext community support NA flag R-bit, to have proxy ND.
Set R-bit in EVPN NA if a given router is default gateway or there is a
local
router attached, which can be determine based on local neighbor entry.
Implement BGP ext community attribute to generate and parse R-bit and
pass along zebra to program neigh entry in kernel.
Upon receiving MAC/IP update with community type 0x06 and sub_type 0x08,
pass the R-bit to zebra to program neigh entry.
Set NTF_ROUTER in neigh entry and inform kernel to do proxy NA for EVPN.
Ref:
https://tools.ietf.org/html/draft-ietf-bess-evpn-na-flags-01
Ticket:CM-21712, CM-21711
Reviewed By:
Testing Done:
Configure Local vni enabled L3 Gateway, which would act as router,
checked
show evpn arp-cache vni x ip <ip of svi> on originated and remote VTEPs.
"Router" flag is set.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Add 'const' to prefix args to several zebra route update,
redistribution, and route owner notification apis.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add a bit of code to allow return of data plane
request messages.
Add the ability to pass the result back to callers
of kernel_route_rib.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The SOUTHBOUND_XXX enum was named a bit poorly.
Let's use a bit better name for what we are trying to do.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
