The problem is that only prefixes were handled and any other `match`
commands were ignored. Let's do not forget them as well.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Problem found that if a router-id was not defined or derived
initially, the bgp->router_id would be set to 0x0 and used
for determining auto-rd values. When bgp received a subsequent
router-id update from zebra, bgp would not completely process
the update since it was treated as updating an already derived
router-id with a new value, which is not desired. This also
could leave the auto rd/rt inforamation missing or invalid in
some cases. This fix allows updating the derived router-id if
the previous value was 0/0.
Ticket: CM-31441
Signed-off-by: Don Slice <dslice@nvidia.com>
bgp->default_keepalive was not considered when setting
peer->v_keepalive, causing the effective keepalive interval to
always be (holdtime/3), even when default_keepalive < (holdtime/3).
This ensures that the default_keepalive is used when it's set and
is < (holdtime/3).
Signed-off-by: Trey Aspelund <taspelund@cumulusnetworks.com>
(cherry picked from commit d8bf8c6128f2e493d473148213bd663a500c7f73)
If you are including a network statement of a /32
then the current bgp martian checks will match the /32
together.
Problem:
!
router bgp 3235
neighbor 192.168.161.2 remote-as external
neighbor 192.168.161.131 remote-as external
!
address-family ipv4 unicast
network 10.10.3.11/32
network 192.168.161.0/24
no neighbor 192.168.161.2 activate
neighbor 192.168.161.2 route-map BLUE in
exit-address-family
!
eva# show bgp ipv4 uni
BGP table version is 1, local router ID is 10.10.3.11, vrf id 0
Default local pref 100, local AS 3235
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
10.10.3.11/32 0.0.0.0(eva) 0 32768 i
*> 192.168.161.0/24 0.0.0.0(eva) 0 32768 i
Displayed 2 routes and 2 total paths
eva# show bgp import-check-table
Current BGP import check cache:
192.168.161.0 valid [IGP metric 0], #paths 1
if enp39s0
Last update: Fri Sep 25 08:00:42 2020
10.10.3.11 valid [IGP metric 0], #paths 1
if lo
Last update: Fri Sep 25 08:00:42 2020
eva# show bgp ipv4 uni summ
BGP router identifier 10.10.3.11, local AS number 3235 vrf-id 0
BGP table version 1
RIB entries 3, using 576 bytes of memory
Peers 1, using 21 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt
janelle(192.168.161.131) 4 60000 69 70 0 0 0 00:03:21 0 1
Total number of neighbors 1
When we are deciding that a nexthop is valid there is not much point in checking
that a static route has a martian nexthop or not, since we self derived it already.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is needed to avoid mangling update-group which is used for many peers.
Sent prefix count is managed by update-groups.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
This would be handy for situations when a notification was sent, but it's
absolutely not clear who triggered that.
Just in case dumping all attributes under the debug mode would help finding
the _bad_ attribute.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
```
(gdb) bt
0 0x00007f45a6f0a781 in raise () from /lib/x86_64-linux-gnu/libc.so.6
1 0x00007f45a6ef455b in abort () from /lib/x86_64-linux-gnu/libc.so.6
2 0x00007f45a7781920 in core_handler (signo=11, siginfo=0x7fffac7b84b0, context=<optimized out>) at lib/sigevent.c:228
3 <signal handler called>
4 0x000055a4133c0f32 in bgp_table_stats (vty=vty@entry=0x55a415acb240, bgp=0x0, afi=AFI_IP, safi=SAFI_UNICAST, json_array=json_array@entry=0x0) at bgpd/bgp_route.c:11412
5 0x000055a4133c13fb in show_ip_bgp_afi_safi_statistics (self=<optimized out>, vty=0x55a415acb240, argc=6, argv=<optimized out>) at bgpd/bgp_route.c:10749
6 0x00007f45a773917d in cmd_execute_command_real (vline=vline@entry=0x55a415ab7e10, vty=vty@entry=0x55a415acb240, cmd=cmd@entry=0x0, filter=FILTER_RELAXED)
at lib/command.c:909
7 0x00007f45a773afdf in cmd_execute_command (vline=vline@entry=0x55a415ab7e10, vty=vty@entry=0x55a415acb240, cmd=0x0, vtysh=vtysh@entry=0) at lib/command.c:968
8 0x00007f45a773b135 in cmd_execute (vty=vty@entry=0x55a415acb240, cmd=cmd@entry=0x55a415ace950 "show ip bgp vrf all statistics", matched=matched@entry=0x0,
vtysh=vtysh@entry=0) at lib/command.c:1122
9 0x00007f45a7794d62 in vty_command (vty=vty@entry=0x55a415acb240, buf=0x55a415ace950 "show ip bgp vrf all statistics") at lib/vty.c:526
10 0x00007f45a7794fb6 in vty_execute (vty=vty@entry=0x55a415acb240) at lib/vty.c:1293
11 0x00007f45a7797804 in vtysh_read (thread=<optimized out>) at lib/vty.c:2126
12 0x00007f45a778f641 in thread_call (thread=thread@entry=0x7fffac7bb040) at lib/thread.c:1550
13 0x00007f45a775b6d8 in frr_run (master=0x55a415542820) at lib/libfrr.c:1098
14 0x000055a4133815d6 in main (argc=10, argv=0x7fffac7bb2a8) at bgpd/bgp_main.c:509
```
"show ip bgp vrf all statistics" should show statistics for all VRFs if "all"
is specified.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Issue: bgp_process_writes will be called when the fd is writable.
And it will bgp_generate_updgrp_packets to generate the
update packets no matter MRAI is set or not.
Fix: bgp_generate_updgrp_packets thread will return without sending
any update when MRAI timer is still running.
Signed-off-by: Richard Wu <wutong23@baidu.com>
It's hard to cope with cases when next-hop is changed/unchanged or
peers are non-direct.
It would be better to show the hostname and nexthop IP address (both)
under `show bgp` to quickly identify the source and the real next-hop
of the route.
If `bgp default show-nexthop-hostname` is toggled the output looks like:
```
spine1-debian-9# show bgp
BGP table version is 1, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 65002
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
* 2a02:4780::/64 fe80::a00:27ff:fe09:f8a3(exit1-debian-9)
0 0 65001 ?
spine1-debian-9# show ip bgp
BGP table version is 5, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 65002
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 10.255.255.0/24 192.168.0.1(exit1-debian-9)
0 0 65001 ?
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
```
exit1-debian-9# show bgp summary
IPv4 Unicast Summary:
BGP router identifier 192.168.0.1, local AS number 100 vrf-id 0
BGP table version 8
RIB entries 15, using 2880 bytes of memory
Peers 2, using 43 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt
192.168.0.2 4 200 10 6 0 0 0 00:00:35 8 8
2a02:4780::2 4 0 0 1 0 0 0 never Active 0
Total number of neighbors 2
exit1-debian-9# show bgp summary established
IPv4 Unicast Summary:
BGP router identifier 192.168.0.1, local AS number 100 vrf-id 0
BGP table version 8
RIB entries 15, using 2880 bytes of memory
Peers 2, using 43 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt
192.168.0.2 4 200 10 6 0 0 0 00:00:39 8 8
Total number of neighbors 2
exit1-debian-9# show bgp summary failed
IPv4 Unicast Summary:
BGP router identifier 192.168.0.1, local AS number 100 vrf-id 0
BGP table version 8
RIB entries 15, using 2880 bytes of memory
Peers 2, using 43 KiB of memory
Neighbor EstdCnt DropCnt ResetTime Reason
2a02:4780::2 0 0 never Waiting for peer OPEN
Total number of neighbors 2
exit1-debian-9#
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
The code in the bgp extcommunity-list function was using
argv_find to get the correct idx. The problem was that
we had already done argv_finds before and idx was non-zero
thus having us always set the seq pointer to what was last
looked up. This causes us to pass in a value to the
underlying function and it would just wisely ignore it
causing a seq number of 0.
We would then write this seq number of 0 and then immediately
reject it on read in again. BOO!
Actually handle argv_find the way it was meant to be.
Ticket:CM-29926
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If we have something like:
```
ip route 1.1.1.0/24 Null0
!
router bgp 100
no bgp ebgp-requires-policy
neighbor 192.168.0.2 remote-as 200
!
address-family ipv4 unicast
network 1.1.1.0/24
redistribute connected
exit-address-family
!
line vty
!
```
1.1.1.0/24 is not advertised due to martian nexthop (0.0.0.0). It starts
working only when we use `redistribute static`.
By checking if it's a BGP static route we able to announce
1.1.1.0/24 with `network 1.1.1.0/24` without redistribute even when
`bgp import-check` is enabled.
Disabling `bgp import-check` works as well, but it's enabled by default
since 7.4.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
unicast and labeled-unicast share the same table, but configuration should
be visible for both independently. Without this fix it confuses a bit
because when you enter `network 10.0.0.0/24` under labeled-unicast it's
written in unicast family block.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
The problem is that peer_af_array returns NULL when SAFI is changed to
unicast. We use unicast table, but peer is created and activated under
labeled-unicast, hence we should lookup with a proper SAFI id.
Without this patch peer_af_find() returns NULL and we can't show
PfxSnt in `show bgp summary`.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Without specifying a default afi/safi we get a segfault:
```
(gdb) frame 4
bgp_table_stats (..., afi=32724, safi=SAFI_UNICAST, ...
11349 if (!bgp->rib[afi][safi]) {
(gdb)
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
The `bgp bestpath bandwidth` command should not be a legal
command. Pull out the `no` form to allow this. Allow
`no bgp bestpath bandwidth` to work as we would expect.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We had already removed the `ip as-path..` command
to have `bgp as-path` but for some reason a `no ip as-path..`
command ALIAS was still around. Kill with extreme prejudice.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is not the attribute involved in path selection and by rfc7606 it should
be just ignored.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Community attributes might have been removed by an inbound route map, so we
should check to ensure they still exist before trying to free them.
This fixes a segfault described in issue #6345.
Signed-off-by: Josh Cox <josh.cox@pureport.com>
It is possible that the if_lookup_by_index() call will return
a NULL value and calling zclient_send_interface_radv_req. Just
test that we have a valid interface pointer.
Found by Coverity
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Modify the import-check command to require the underlying prefix
to exist in the rib. General consensus is that this is the correct
behavior.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported that in many circumstances, RAs created in the
process of bringing up numbered IPv6 peers with extended-nexthop
capability enabled (for ipv4 over ipv6) were not stopped on the
interface when those peers were deleted. Found several circumstances
where this occurred and fix them in this patch.
Ticket: CM-26875
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
These are easy to get subtly wrong, and doing so can cause
nondeterministic failures when racing in parallel builds.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Issue:
Configuring default-originate when static default route is previously
advertised results in withdrawal of the route.
Fix :
Delete the adj-out entry for the previously advertised static
default route without sending explicit withdraw message.
Signed-off-by: kssoman <somanks@gmail.com>
