tests: Check if we can see advertised routes with route-map applied

Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>

tests/topotests/bgp_show_advertised_routes_detail/r1/frr.conf

@@ -0,0 +1,13 @@
+!
+int r1-eth0
+ ip address 192.168.1.1/24
+!
+router bgp 65001
+ no bgp ebgp-requires-policy
+ no bgp network import-check
+ neighbor 192.168.1.2 remote-as auto
+ neighbor 192.168.1.2 timers 1 3
+ neighbor 192.168.1.2 timers connect 1
+  network 10.10.10.1/32
+ exit-address-family
+!

tests/topotests/bgp_show_advertised_routes_detail/r2/frr.conf

@@ -0,0 +1,29 @@
+!
+int r2-eth0
+ ip address 192.168.1.2/24
+!
+int r2-eth1
+ ip address 192.168.2.2/24
+!
+router bgp 65002
+ no bgp ebgp-requires-policy
+ neighbor 192.168.1.1 remote-as auto
+ neighbor 192.168.1.1 timers 1 3
+ neighbor 192.168.1.1 timers connect 1
+ neighbor 192.168.2.3 remote-as auto
+ neighbor 192.168.2.3 timers 1 3
+ neighbor 192.168.2.3 timers connect 1
+ address-family ipv4 unicast
+  neighbor 192.168.2.3 route-map r3 out
+ exit-address-family
+ !
+!
+ip prefix-list p1 permit 10.10.10.1/32
+!
+route-map r3 permit 10
+ match ip address prefix-list p1
+ set large-community 65001:65002:65003
+ set community 65001:65002
+ set extcommunity bandwidth 100
+exit
+!

tests/topotests/bgp_show_advertised_routes_detail/r3/frr.conf

@@ -0,0 +1,11 @@
+!
+int r3-eth0
+ ip address 192.168.2.3/24
+!
+router bgp 65003
+ no bgp ebgp-requires-policy
+ neighbor 192.168.2.2 remote-as auto
+ neighbor 192.168.2.2 timers 1 3
+ neighbor 192.168.2.2 timers connect 1
+ !
+!

tests/topotests/bgp_show_advertised_routes_detail/test_bgp_show_advertised_routes_detail.py

@@ -0,0 +1,88 @@
+#!/usr/bin/env python
+# SPDX-License-Identifier: ISC
+
+# Copyright (c) 2024 by
+# Donatas Abraitis <donatas@opensourcerouting.org>
+#
+
+import os
+import sys
+import json
+import pytest
+import functools
+
+pytestmark = [pytest.mark.bgpd]
+
+CWD = os.path.dirname(os.path.realpath(__file__))
+sys.path.append(os.path.join(CWD, "../"))
+
+# pylint: disable=C0413
+from lib import topotest
+from lib.topogen import Topogen, get_topogen
+
+
+def setup_module(mod):
+    topodef = {"s1": ("r1", "r2"), "s2": ("r2", "r3")}
+    tgen = Topogen(topodef, mod.__name__)
+    tgen.start_topology()
+
+    router_list = tgen.routers()
+
+    for _, (rname, router) in enumerate(router_list.items(), 1):
+        router.load_frr_config(os.path.join(CWD, "{}/frr.conf".format(rname)))
+
+    tgen.start_router()
+
+
+def teardown_module(mod):
+    tgen = get_topogen()
+    tgen.stop_topology()
+
+
+def test_bgp_show_advertised_routes_detail():
+    tgen = get_topogen()
+
+    if tgen.routers_have_failure():
+        pytest.skip(tgen.errors)
+
+    r2 = tgen.gears["r2"]
+
+    def _bgp_converge():
+        output = json.loads(
+            r2.vtysh_cmd(
+                "show bgp ipv4 unicast neighbor 192.168.2.3 advertised-routes detail json"
+            )
+        )
+        expected = {
+            "advertisedRoutes": {
+                "10.10.10.1/32": {
+                    "paths": [
+                        {
+                            "community": {
+                                "string": "65001:65002",
+                            },
+                            "extendedCommunity": {
+                                "string": "LB:65002:12500000 (100.000 Mbps)"
+                            },
+                            "largeCommunity": {
+                                "string": "65001:65002:65003",
+                            },
+                        }
+                    ],
+                }
+            },
+            "totalPrefixCounter": 1,
+            "filteredPrefixCounter": 0,
+        }
+        return topotest.json_cmp(output, expected)
+
+    test_func = functools.partial(
+        _bgp_converge,
+    )
+    _, result = topotest.run_and_expect(test_func, None, count=30, wait=1)
+    assert result is None, "Can't converge"
+
+
+if __name__ == "__main__":
+    args = ["-s"] + sys.argv[1:]
+    sys.exit(pytest.main(args))