*: get rid of most daemons.conf references

There's a few left over to get compatibility and not break user
installs, but most is gone.

Signed-off-by: David Lamparter <equinox@diac24.net>

alpine/APKBUILD.in

@@ -23,7 +23,7 @@ makedepends="ncurses-dev net-snmp-dev gawk texinfo perl
 checkdepends="pytest py-setuptools"
 install="$pkgname.pre-install $pkgname.pre-deinstall $pkgname.post-deinstall"
 subpackages="$pkgname-dev $pkgname-doc $pkgname-dbg"
-source="$pkgname-$pkgver.tar.gz docker-start daemons daemons.conf"
+source="$pkgname-$pkgver.tar.gz docker-start daemons"
 
 builddir="$srcdir"/$pkgname-$pkgver
 
@@ -62,7 +62,6 @@ package() {
 
 	install -Dm755 "$srcdir"/docker-start "$pkgdir"$_sbindir
 	install -Dm644 "$srcdir"/daemons "$pkgdir"$_sysconfdir
-	install -Dm644 "$srcdir"/daemons.conf "$pkgdir"$_sysconfdir
 	install -d "$pkgdir"/etc/init.d
 	ln -s ${_sbindir}/frr "$pkgdir"/etc/init.d/frr
 }

debianpkg/README.Debian

@@ -83,7 +83,7 @@ into the kernel.
 =====================================================================
 
 If this message occurs the receive buffer should be increased by adding the
-following to /etc/sysctl.conf and "--nl-bufsize" to /etc/frr/daemons.conf.
+following to /etc/sysctl.conf and "--nl-bufsize" to /etc/frr/daemons.
 > net.core.rmem_default = 262144
 > net.core.rmem_max = 262144
 See message #4525 from 2005-05-09 in the quagga-users mailing list.

doc/developer/building-frr-for-alpine.rst

@@ -85,7 +85,6 @@ startup.  To configure by hand:
 
    docker exec -it frr /bin/sh
    vi /etc/frr/daemons
-   vi /etc/frr/daemons.conf
    cp /etc/frr/zebra.conf.sample /etc/frr/zebra.conf
    vi /etc/frr/zebra.conf
    /etc/init.d/frr start

doc/developer/building-frr-for-ubuntu1204.rst

@@ -158,7 +158,6 @@ Install the init.d service
 
     sudo install -m 755 tools/frr /etc/init.d/frr
     sudo install -m 644 tools/etc/frr/daemons /etc/frr/daemons
-    sudo install -m 644 tools/etc/frr/daemons.conf /etc/frr/daemons.conf
     sudo install -m 644 -o frr -g frr tools/etc/frr/vtysh.conf /etc/frr/vtysh.conf
 
 Enable daemons

doc/developer/building-frr-for-ubuntu1404.rst

@@ -112,7 +112,6 @@ Install the init.d service
 
     sudo install -m 755 tools/frr /etc/init.d/frr
     sudo install -m 644 tools/etc/frr/daemons /etc/frr/daemons
-    sudo install -m 644 tools/etc/frr/daemons.conf /etc/frr/daemons.conf
     sudo install -m 644 -o frr -g frr tools/etc/frr/vtysh.conf /etc/frr/vtysh.conf
 
 Enable daemons

doc/developer/building-frr-for-ubuntu1604.rst

@@ -139,9 +139,7 @@ Install the systemd service (if rebooted from last step, change directory back t
 ::
 
     sudo install -m 644 tools/frr.service /etc/systemd/system/frr.service
-    sudo install -m 644 tools/etc/default/frr /etc/default/frr
     sudo install -m 644 tools/etc/frr/daemons /etc/frr/daemons
-    sudo install -m 644 tools/etc/frr/daemons.conf /etc/frr/daemons.conf
     sudo install -m 644 tools/etc/frr/frr.conf /etc/frr/frr.conf
     sudo install -m 644 -o frr -g frr tools/etc/frr/vtysh.conf /etc/frr/vtysh.conf
 

doc/developer/building-frr-for-ubuntu1804.rst

@@ -203,9 +203,7 @@ Install the systemd service
 ::
 
    sudo install -m 644 tools/frr.service /etc/systemd/system/frr.service
-   sudo install -m 644 tools/etc/default/frr /etc/default/frr
    sudo install -m 644 tools/etc/frr/daemons /etc/frr/daemons
-   sudo install -m 644 tools/etc/frr/daemons.conf /etc/frr/daemons.conf
    sudo install -m 644 tools/etc/frr/frr.conf /etc/frr/frr.conf
    sudo install -m 644 -o frr -g frr tools/etc/frr/vtysh.conf /etc/frr/vtysh.conf
 

doc/user/rpki.rst

@@ -67,17 +67,17 @@ Enabling RPKI
    to configure at least one reachable cache server. See section
    :ref:`configuring-rpki-rtr-cache-servers` for configuring a cache server.
 
-.. index:: RPKI and daemons.conf
+.. index:: RPKI and daemons
 
 When first installing FRR with RPKI support from the pre-packaged binaries.
 Remember to add ``-M rpki`` to the variable ``bgpd_options`` in
-:file:`/etc/frr/daemons.conf` , like so::
+:file:`/etc/frr/daemons` , like so::
 
-   bgpd_options="   --daemon -A 127.0.0.1 -M rpki"
+   bgpd_options="   -A 127.0.0.1 -M rpki"
 
 instead of the default setting::
 
-   bgpd_options="   --daemon -A 127.0.0.1"
+   bgpd_options="   -A 127.0.0.1"
 
 Otherwise you will encounter an error when trying to enter RPKI
 configuration mode due to the ``rpki`` module not being loaded when the BGP

doc/user/setup.rst

@@ -41,7 +41,7 @@ Daemons Configuration File
 --------------------------
 There is another file that controls the default options passed to daemons when
 starting FRR as a service. This file is located in your configuration
-directory, usually at :file:`/etc/frr/daemons.conf`.
+directory, usually at :file:`/etc/frr/daemons`.
 
 This file has several parts. Here is an example:
 

tools/etc/default/frr

@@ -1,10 +0,0 @@
-MAX_INSTANCES=5
-MAX_FDS=1024
-ZEBRA_OPTIONS="-s 16777216 -A 127.0.0.1"
-BGPD_OPTIONS="-A 127.0.0.1"
-OSPFD_OPTIONS="-A 127.0.0.1"
-OSPF6D_OPTIONS="-A ::1"
-RIPD_OPTIONS="-A 127.0.0.1"
-RIPNGD_OPTIONS="-A ::1"
-ISISD_OPTIONS="-A 127.0.0.1"
-EIGRP_OPTIONS="-A 127.0.0.1"

tools/etc/frr/daemons

@@ -29,3 +29,37 @@ sharpd=no
 pbrd=no
 bfdd=no
 fabricd=no
+
+#
+# If this option is set the /etc/init.d/frr script automatically loads
+# the config via "vtysh -b" when the servers are started.
+# Check /etc/pam.d/frr if you intend to use "vtysh"!
+#
+vtysh_enable=yes
+zebra_options="  -A 127.0.0.1 -s 90000000"
+bgpd_options="   -A 127.0.0.1"
+ospfd_options="  -A 127.0.0.1"
+ospf6d_options=" -A ::1"
+ripd_options="   -A 127.0.0.1"
+ripngd_options=" -A ::1"
+isisd_options="  -A 127.0.0.1"
+pimd_options="   -A 127.0.0.1"
+ldpd_options="   -A 127.0.0.1"
+nhrpd_options="  -A 127.0.0.1"
+eigrpd_options=" -A 127.0.0.1"
+babeld_options=" -A 127.0.0.1"
+sharpd_options=" -A 127.0.0.1"
+pbrd_options="   -A 127.0.0.1"
+staticd_options="-A 127.0.0.1"
+bfdd_options="   -A 127.0.0.1"
+fabricd_options="-A 127.0.0.1"
+
+# The list of daemons to watch is automatically generated by the init script.
+watchfrr_options="-r '/usr/lib/frr/watchfrr.sh restart %s' -s '/usr/lib/frr/watchfrr.sh start %s' -k '/usr/lib/frr/watchfrr.sh stop %s'"
+
+# for debugging purposes, you can specify a "wrap" command to start instead
+# of starting the daemon directly, e.g. to use valgrind on ospfd:
+#   ospfd_wrap="/usr/bin/valgrind"
+# or you can use "all_wrap" for all daemons, e.g. to use perf record:
+#   all_wrap="/usr/bin/perf record --call-graph -"
+# the normal daemon command is added to this at the end.

tools/etc/frr/daemons.conf

@@ -1,33 +1 @@
-#
+# this file is deprecated, please use "daemons" instead.
-# If this option is set the /etc/init.d/frr script automatically loads
-# the config via "vtysh -b" when the servers are started.
-# Check /etc/pam.d/frr if you intend to use "vtysh"!
-#
-vtysh_enable=yes
-zebra_options="  -A 127.0.0.1 -s 90000000"
-bgpd_options="   -A 127.0.0.1"
-ospfd_options="  -A 127.0.0.1"
-ospf6d_options=" -A ::1"
-ripd_options="   -A 127.0.0.1"
-ripngd_options=" -A ::1"
-isisd_options="  -A 127.0.0.1"
-pimd_options="   -A 127.0.0.1"
-ldpd_options="   -A 127.0.0.1"
-nhrpd_options="  -A 127.0.0.1"
-eigrpd_options=" -A 127.0.0.1"
-babeld_options=" -A 127.0.0.1"
-sharpd_options=" -A 127.0.0.1"
-pbrd_options="   -A 127.0.0.1"
-staticd_options="-A 127.0.0.1"
-bfdd_options="   -A 127.0.0.1"
-fabricd_options="-A 127.0.0.1"
-
-# The list of daemons to watch is automatically generated by the init script.
-watchfrr_options="-r '/usr/lib/frr/watchfrr.sh restart %s' -s '/usr/lib/frr/watchfrr.sh start %s' -k '/usr/lib/frr/watchfrr.sh stop %s'"
-
-# for debugging purposes, you can specify a "wrap" command to start instead
-# of starting the daemon directly, e.g. to use valgrind on ospfd:
-#   ospfd_wrap="/usr/bin/valgrind"
-# or you can use "all_wrap" for all daemons, e.g. to use perf record:
-#   all_wrap="/usr/bin/perf record --call-graph -"
-# the normal daemon command is added to this at the end.