proxmox-mirrors/mirror_frr
1
0
Fork 0
mirror of https://git.proxmox.com/git/mirror_frr synced 2025-08-02 20:06:06 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

debian: Add Systemd integration to control files

Browse Source 
Ticket:
Reviewed By: inprogress
Testing Done: minimal.  Built, installed, started a few services.

This is in progress testing.  quagga.service tries to start and stop
all the routing daemons.  There is no check for whether they are enabled
via /etc/quagga/daemons (yet).

As installed, nothing is enabled (won't start on system boot or install).

The -A 127.0.0.1 is now in /etc/default/quagga, and picked up from there
by all routing daemons.

MAX_FDS is in all the service files for now as LimitNOFILE.  Users who
need to modified the number of fd's will use e.g.
the file /etc/systemd/system/bgpd.service.d/maxfds.conf to override
bgpd.service contents
    [Service]
    LimitNOFILE=2048

MAX_INSTANCES isn't implemented yet.

reload isn't implemented yet (it should be possible via ExecReload
in the services, just not done yet).

The init.d file is removed.

All of the daemons are started without the -d/--daemonize option, and
use Type=simple rather than forking in the services file, to use the
systemd daemonizing.

All the daemons were set to have a 1m start time, and restart up to 3
times in 3 minutes, and for now, are only restart on-abnormal, not always
(we'll likely want the latter, but testing is easier with abnormal).

Also use tmpfiles.d to create /run/quagga

For now, we leave dh_installinit, even though it creates unneeded
update-rc.d calls, and causes lintian complaints about init.d files
that aren't present, so that it installs files like etc/default/quagga.
It also runs the tmpfiles.d commands for us, so we need to add those to
postinst if we dummy it out to fix the update-rc.d lines being added
(and lintian complaints).

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit is contained in:
Donald Sharp 2016-02-10 07:30:56 -05:00
parent 66dd6fdbdd
commit 858aa29c68
15 changed files with 229 additions and 559 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
debian/babeld.service vendored Normal file
View File

@ -0,0 +1,20 @@
[Unit]
Description=Babel routing daemon
After=syslog.target networking.service zebra.service
OnFailure=heartbeat-failed@%n.service
[Service]
Nice=-5
Type=notify
EnvironmentFile=/etc/default/quagga
StartLimitInterval=3m
StartLimitBurst=3
TimeoutSec=1m
WatchdogSec=60s
RestartSec=5
Restart=on-abnormal
LimitNOFILE=1024
ExecStart=/usr/lib/quagga/babeld $BABEL_OPTIONS
ExecStartPost=/usr/bin/vtysh -b -n
[Install]
WantedBy=network.target

19
debian/bgpd.service vendored Normal file
View File

@ -0,0 +1,19 @@
[Unit]
Description=Cumulus Linux Quagga BGP Daemon
After=syslog.target networking.service zebra.service
OnFailure=heartbeat-failed@%n.service
[Service]
Nice=-5
EnvironmentFile=/etc/default/quagga
Type=notify
StartLimitInterval=3m
StartLimitBurst=3
TimeoutSec=1m
WatchdogSec=60s
RestartSec=5
LimitNOFILE=1024
ExecStart=/usr/lib/quagga/bgpd $BGPD_OPTIONS
ExecStartPost=/usr/bin/vtysh -b -n
[Install]
WantedBy=network.target

4
debian/control vendored
View File

@ -3,8 +3,8 @@ Section: net
Priority: optional
Maintainer: Christian Hammers <ch@debian.org>
Uploaders: Florian Weimer <fw@debian.org>
Build-Depends: debhelper (>= 7.0.50~), libncurses5-dev, libreadline-dev, texlive-latex-base, texlive-generic-recommended, libpam0g-dev | libpam-dev, libcap-dev, texinfo (>= 4.7), imagemagick, ghostscript, groff, po-debconf, autotools-dev, hardening-wrapper, libpcre3-dev, gawk, chrpath, libsnmp-dev, git, dh-autoreconf, libjson0, libjson0-dev
Standards-Version: 3.9.4
Build-Depends: debhelper (>= 7.0.50~), libncurses5-dev, libreadline-dev, texlive-latex-base, texlive-generic-recommended, libpam0g-dev | libpam-dev, libcap-dev, texinfo (>= 4.7), imagemagick, ghostscript, groff, po-debconf, autotools-dev, hardening-wrapper, libpcre3-dev, gawk, chrpath, libsnmp-dev, git, dh-autoreconf, libjson0, libjson0-dev, dh-systemd, libsystemd-dev
Standards-Version: 3.9.6
Homepage: http://www.quagga.net/
XS-Testsuite: autopkgtest

20
debian/isisd.service vendored Normal file
View File

@ -0,0 +1,20 @@
[Unit]
Description=IS-IS routing daemon
After=syslog.target networking.service zebra.service
OnFailure=heartbeat-failed@%n.service
[Service]
Nice=-5
Type=notify
EnvironmentFile=/etc/default/quagga
StartLimitInterval=3m
StartLimitBurst=3
TimeoutSec=1m
WatchdogSec=60s
RestartSec=5
Restart=on-abnormal
LimitNOFILE=1024
ExecStart=/usr/lib/quagga/isisd $ISISD_OPTIONS
ExecStartPost=/usr/bin/vtysh -b -n
[Install]
WantedBy=network.target

19
debian/ospf6d.service vendored Normal file
View File

@ -0,0 +1,19 @@
[Unit]
Description=OSPF routing daemon for IPv6
After=syslog.target networking.service zebra.service
OnFailure=heartbeat-failed@%n.service
[Service]
Nice=-5
Type=notify
EnvironmentFile=/etc/default/quagga
StartLimitInterval=3m
StartLimitBurst=3
TimeoutSec=1m
WatchdogSec=60s
RestartSec=5
Restart=on-abnormal
ExecStart=/usr/lib/quagga/ospf6d $OSPF6D_OPTIONS
ExecStartPost=/usr/bin/vtysh -b -n
[Install]
WantedBy=network.target

20
debian/ospfd.service vendored Normal file
View File

@ -0,0 +1,20 @@
[Unit]
Description=OSPF routing daemon
After=syslog.target networking.service zebra.service
OnFailure=heartbeat-failed@%n.service
[Service]
Type=notify
Nice=-5
EnvironmentFile=/etc/default/quagga
StartLimitInterval=3m
StartLimitBurst=3
TimeoutSec=1m
WatchdogSec=60s
RestartSec=5
Restart=on-abnormal
LimitNOFILE=1024
ExecStart=/usr/lib/quagga/ospfd $OSPFD_OPTIONS
ExecStartPost=/usr/bin/vtysh -b -n
[Install]
WantedBy=network.target

2
debian/quagga.conf vendored Normal file
View File

@ -0,0 +1,2 @@
# Create the /run/quagga directory at boot or from systemd-tmpfiles on install
d /run/quagga 0755 quagga quagga

8
debian/quagga.default vendored
View File

@ -1,2 +1,10 @@
MAX_INSTANCES=5
MAX_FDS=1024
ZEBRA_OPTIONS="-s 16777216 -A 127.0.0.1"
BGPD_OPTIONS="-A 127.0.0.1"
OSPFD_OPTIONS="-A 127.0.0.1"
OSPF6D_OPTIONS="-A ::1"
RIPD_OPTIONS="-A 127.0.0.1"
RIPNGD_OPTIONS="-A ::1"
ISISD_OPTIONS="-A 127.0.0.1"
BABELD_OPTIONS="-A 127.0.0.1"

557
debian/quagga.init.d vendored
View File

@ -1,557 +0,0 @@
#!/bin/bash
#
### BEGIN INIT INFO
# Provides: quagga
# Required-Start: $local_fs $network $remote_fs $syslog
# Required-Stop: $local_fs $network $remote_fs $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: start and stop the Quagga routing suite
# Description: Quagga is a routing suite for IP routing protocols like
# BGP, OSPF, RIP and others. This script contols the main
# daemon "quagga" as well as the individual protocol daemons.
### END INIT INFO
#
PATH=/bin:/usr/bin:/sbin:/usr/sbin
D_PATH=/usr/lib/quagga
C_PATH=/etc/quagga
V_PATH=/var/run/quagga
# Local Daemon selection may be done by using /etc/quagga/daemons.
# See /usr/share/doc/quagga/README.Debian.gz for further information.
# Keep zebra first and do not list watchquagga!
DAEMONS="zebra bgpd ripd ripngd ospfd ospf6d isisd babeld"
MAX_INSTANCES=5
RELOAD_SCRIPT=/usr/lib/quagga/quagga-reload.py
. /lib/lsb/init-functions
# Print the name of the pidfile.
pidfile()
{
echo "$V_PATH/$1.pid"
}
# Print the name of the vtysh.
vtyfile()
{
echo "$V_PATH/$1.vty"
}
# Check if daemon is started by using the pidfile.
started()
{
[ ! -e `pidfile $1` ] && return 3
if [ -n "$2" ] && [ "$2" == "log" ]; then
status_of_proc -p `pidfile $1` $1 $1 && return 0 || return $?
else
kill -0 `cat \`pidfile $1\`` 2> /dev/null || return 1
return 0
fi
}
# Loads the config via vtysh -b if configured to do so.
vtysh_b ()
{
# Rember, that all variables have been incremented by 1 in convert_daemon_prios()
if [ "$vtysh_enable" = 2 -a -f $C_PATH/Quagga.conf ]; then
/usr/bin/vtysh -b
fi
}
# Check if the daemon is activated and if its executable and config files
# are in place.
# params: daemon name
# returns: 0=ok, 1=error
check_daemon()
{
# If the integrated config file is used the others are not checked.
if [ -r "$C_PATH/Quagga.conf" ]; then
return 0
fi
# vtysh_enable has no config file nor binary so skip check.
# (Not sure why vtysh_enable is in this list but does not hurt)
if [ $1 != "watchquagga" -a $1 != "vtysh_enable" ]; then
# check for daemon binary
if [ ! -x "$D_PATH/$1" ]; then return 1; fi
# check for config file
if [ -n "$2" ]; then
if [ ! -r "$C_PATH/$1-$2.conf" ]; then
touch "$C_PATH/$1-$2.conf"
chown quagga:quagga "$C_PATH/$1-$2.conf"
fi
elif [ ! -r "$C_PATH/$1.conf" ]; then
touch "$C_PATH/$1.conf"
chown quagga:quagga "$C_PATH/$1.conf"
fi
fi
return 0
}
# Starts the server if it's not alrady running according to the pid file.
# The Quagga daemons creates the pidfile when starting.
start()
{
ulimit -n $MAX_FDS
if [ "$1" = "watchquagga" ]; then
# We may need to restart watchquagga if new daemons are added and/or
# removed
if started "$1" ; then
stop watchquagga
else
# Echo only once. watchquagga is printed in the stop above
echo -n " $1"
fi
start-stop-daemon \
--start \
--pidfile=`pidfile $1` \
--exec "$D_PATH/$1" \
-- \
"${watchquagga_options[@]}"
elif [ -n "$2" ]; then
echo -n " $1-$2"
if ! check_daemon $1 $2 ; then
echo -n " (binary does not exist)"
return;
fi
start-stop-daemon \
--start \
--pidfile=`pidfile $1-$2` \
--exec "$D_PATH/$1" \
-- \
`eval echo "$""$1""_options"` -n "$2"
else
echo -n " $1"
if ! check_daemon $1; then
echo -n " (binary does not exist)"
return;
fi
start-stop-daemon \
--start \
--pidfile=`pidfile $1` \
--exec "$D_PATH/$1" \
-- \
`eval echo "$""$1""_options"`
fi
}
# Stop the daemon given in the parameter, printing its name to the terminal.
stop()
{
local inst
if [ -n "$2" ]; then
inst="$1-$2"
else
inst="$1"
fi
if ! started "$inst" ; then
echo -n " ($inst)"
return 0
else
PIDFILE=`pidfile $inst`
PID=`cat $PIDFILE 2>/dev/null`
start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --oknodo --pidfile "$PIDFILE" --exec "$D_PATH/$1"
#
# Now we have to wait until $DAEMON has _really_ stopped.
#
if test -n "$PID" && kill -0 $PID 2>/dev/null; then
echo -n " (waiting) ."
cnt=0
while kill -0 $PID 2>/dev/null; do
cnt=`expr $cnt + 1`
if [ $cnt -gt 60 ]; then
# Waited 120 secs now, fail.
echo -n "Failed.. "
break
fi
sleep 2
echo -n "."
done
fi
echo -n " $inst"
rm -f `pidfile $inst`
rm -f `vtyfile $inst`
fi
}
# Converts values from /etc/quagga/daemons to all-numeric values.
convert_daemon_prios()
{
for name in $DAEMONS zebra vtysh_enable watchquagga_enable; do
# First, assign the value set by the user to $value
eval value=\${${name}:0:3}
# Daemon not activated or entry missing?
if [ "$value" = "no" -o "$value" = "" ]; then value=0; fi
# These strings parsed for backwards compatibility.
if [ "$value" = "yes" -o "$value" = "true" ]; then
value=1;
fi
# Zebra is threatened special. It must be between 0=off and the first
# user assigned value "1" so we increase all other enabled daemons' values.
if [ "$name" != "zebra" -a "$value" -gt 0 ]; then value=`expr "$value" + 1`; fi
# If e.g. name is zebra then we set "zebra=yes".
eval $name=$value
done
}
# Starts watchquagga for all wanted daemons.
start_watchquagga()
{
local daemon_name
local daemon_prio
local found_one
local daemon_inst
# Start the monitor daemon only if desired.
if [ 0 -eq "$watchquagga_enable" ]; then
return
fi
# Check variable type
if ! declare -p watchquagga_options | grep -q '^declare \-a'; then
echo
echo "ERROR: The variable watchquagga_options from /etc/quagga/debian.cnf must be a BASH array!"
echo "ERROR: Please convert config file and restart!"
exit 1
fi
# Which daemons have been started?
found_one=0
for daemon_name in $DAEMONS; do
eval daemon_prio=\$$daemon_name
if [ "$daemon_prio" -gt 0 ]; then
eval "daemon_inst=\${${daemon_name}_instances//,/ }"
if [ -n "$daemon_inst" ]; then
for inst in ${daemon_inst}; do
eval "inst_disable=\${${daemon_name}_${inst}}"
if [ -z ${inst_disable} ] || [ ${inst_disable} != 0 ]; then
if check_daemon $daemon_name $inst; then
watchquagga_options+=("${daemon_name}-${inst}")
fi
fi
done
else
if check_daemon $daemon_name; then
watchquagga_options+=($daemon_name)
fi
fi
found_one=1
fi
done
# Start if at least one daemon is activated.
if [ $found_one -eq 1 ]; then
echo -n "Starting Quagga monitor daemon:"
start watchquagga
echo "."
fi
}
# Stopps watchquagga.
stop_watchquagga()
{
echo -n "Stopping Quagga monitor daemon:"
stop watchquagga
echo "."
}
# Stops all daemons that have a lower level of priority than the given.
# (technically if daemon_prio >= wanted_prio)
stop_prio()
{
local wanted_prio
local daemon_prio
local daemon_list
local daemon_inst
local inst
if [ -n "$2" ] && [[ "$2" =~ (.*)-(.*) ]]; then
daemon=${BASH_REMATCH[1]}
inst=${BASH_REMATCH[2]}
else
daemon="$2"
fi
wanted_prio=$1
daemon_list=${daemon:-$DAEMONS}
echo -n "Stopping Quagga daemons (prio:$wanted_prio):"
for prio_i in `seq 10 -1 $wanted_prio`; do
for daemon_name in $daemon_list; do
eval daemon_prio=\${${daemon_name}:0:3}
daemon_inst=""
if [ $daemon_prio -eq $prio_i ]; then
eval "daemon_inst=\${${daemon_name}_instances//,/ }"
if [ -n "$daemon_inst" ]; then
for i in ${daemon_inst}; do
if [ -n "$inst" ] && [ "$i" == "$inst" ]; then
stop "$daemon_name" "$inst"
elif [ x"$inst" == x ]; then
stop "$daemon_name" "$i"
fi
done
else
stop "$daemon_name"
fi
fi
done
done
echo "."
if [ -z "$inst" ]; then
# Now stop other daemons that're prowling, coz the daemons file changed
echo -n "Stopping other quagga daemons"
if [ -n "$daemon" ]; then
eval "file_list_suffix="$V_PATH"/"$daemon*""
else
eval "file_list_suffix="$V_PATH/*""
fi
for pidfile in $file_list_suffix.pid; do
PID=`cat $pidfile 2>/dev/null`
start-stop-daemon --stop --quiet --oknodo --pidfile "$pidfile"
echo -n "."
rm -rf "$pidfile"
done
echo "."
echo -n "Removing remaining .vty files"
for vtyfile in $file_list_suffix.vty; do
rm -rf "$vtyfile"
done
echo "."
fi
}
# Starts all daemons that have a higher level of priority than the given.
# (technically if daemon_prio <= wanted_prio)
start_prio()
{
local wanted_prio
local daemon_prio
local daemon_list
local daemon_name
local daemon_inst
local inst
if [ -n "$2" ] && [[ "$2" =~ (.*)-(.*) ]]; then
daemon=${BASH_REMATCH[1]}
inst=${BASH_REMATCH[2]}
else
daemon="$2"
fi
wanted_prio=$1
daemon_list=${daemon:-$DAEMONS}
echo -n "Starting Quagga daemons (prio:$wanted_prio):"
for prio_i in `seq 1 $wanted_prio`; do
for daemon_name in $daemon_list; do
eval daemon_prio=\$${daemon_name}
daemon_inst=""
if [ $daemon_prio -eq $prio_i ]; then
eval "daemon_inst=\${${daemon_name}_instances//,/ }"
if [ -n "$daemon_inst" ]; then
if [ `echo "$daemon_inst" | wc -w` -gt ${MAX_INSTANCES} ]; then
echo "Max instances supported is ${MAX_INSTANCES}. Aborting"
exit 1
fi
# Check if we're starting again by switching from single instance
# to MI version
if started "$daemon_name"; then
PIDFILE=`pidfile $daemon_name`
start-stop-daemon \
--stop --quiet --oknodo \
--pidfile "$PIDFILE" \
--exec "$D_PATH/$daemon_name"
rm -f `pidfile $1`
rm -f `vtyfile $1`
fi
for i in ${daemon_inst}; do
if [ -n "$inst" ] && [ "$i" == "$inst" ]; then
start "$daemon_name" "$inst"
elif [ x"$inst" == x ]; then
start "$daemon_name" "$i"
fi
done
else
# Check if we're starting again by switching from
# single instance to MI version
eval "file_list_suffix="$V_PATH"/"$daemon_name-*""
for pidfile in $file_list_suffix.pid; do
start-stop-daemon --stop --quiet --oknodo --pidfile "$pidfile"
echo -n "."
rm -rf "$pidfile"
done
for vtyfile in $file_list_suffix.vty; do
rm -rf "$vtyfile"
done
start "$daemon_name"
fi
fi
done
done
echo "."
}
check_status()
{
local daemon_name
local daemon_prio
local daemon_inst
local failed_status=0
if [ -n "$1" ] && [[ "$1" =~ (.*)-(.*) ]]; then
daemon=${BASH_REMATCH[1]}
inst=${BASH_REMATCH[2]}
else
daemon="$1"
fi
daemon_list=${daemon:-$DAEMONS}
# Which daemons have been started?
for daemon_name in $daemon_list; do
eval daemon_prio=\$$daemon_name
if [ "$daemon_prio" -gt 0 ]; then
eval "daemon_inst=\${${daemon_name}_instances//,/ }"
if [ -n "$daemon_inst" ]; then
for i in ${daemon_inst}; do
if [ -n "$inst" -a "$inst" = "$i" ]; then
started "$1" "log" || failed_status=$?
elif [ -z "$inst" ]; then
started "$daemon_name-$i" "log" || failed_status=$?
fi
done
else
started "$daemon_name" "log" || failed_status=$?
fi
fi
done
# All daemons that need to have been started are up and running
return $failed_status
}
#########################################################
# Main program #
#########################################################
# Config broken but script must exit silently.
[ ! -r "$C_PATH/daemons" ] && exit 0
# Load configuration
. "$C_PATH/daemons"
. "$C_PATH/debian.conf"
# Read configuration variable file if it is present
[ -r /etc/default/quagga ] && . /etc/default/quagga
MAX_INSTANCES=${MAX_INSTANCES:=5}
# Set priority of un-startable daemons to 'no' and substitute 'yes' to '0'
convert_daemon_prios
if [ ! -d $V_PATH ]; then
echo "Creating $V_PATH"
mkdir -p $V_PATH
chown quagga:quagga $V_PATH
chmod 755 /$V_PATH
fi
if [ -n "$3" ] && [ "$3" != "all" ]; then
dmn="$2"-"$3"
elif [ -n "$2" ] && [ "$2" != "all" ]; then
dmn="$2"
fi
case "$1" in
start)
# Try to load this necessary (at least for 2.6) module.
if [ -d /lib/modules/`uname -r` ] ; then
echo "Loading capability module if not yet done."
set +e; LC_ALL=C modprobe -a capability 2>&1 | egrep -v "(not found|Can't locate)"; set -e
fi
# Start all daemons
cd $C_PATH/
if [ "$2" != "watchquagga" ]; then
start_prio 10 $dmn
fi
vtysh_b
start_watchquagga
;;
1|2|3|4|5|6|7|8|9|10)
# Stop/start daemons for the appropriate priority level
stop_prio $1
start_prio $1
vtysh_b
;;
stop|0)
# Stop all daemons at level '0' or 'stop'
stop_watchquagga
if [ "$dmn" != "watchquagga" ]; then
[ -n "${dmn}" ] && eval "${dmn/-/_}=0"
stop_prio 0 $dmn
fi
if [ -z "$dmn" -o "$dmn" = "zebra" ]; then
echo "Removing all routes made by zebra."
ip route flush proto zebra
else
[ -n "$dmn" ] && eval "${dmn/-/_}=0"
start_watchquagga
fi
;;
reload)
# Just apply the commands that have changed, no restart necessary
[ ! -x "$RELOAD_SCRIPT" ] && echo "quagga-reload script not available" && exit 0
NEW_CONFIG_FILE="${2:-$C_PATH/Quagga.conf}"
[ ! -r $NEW_CONFIG_FILE ] && echo "Unable to read new configuration file $NEW_CONFIG_FILE" && exit 1
echo "Applying only incremental changes to running configuration from Quagga.conf"
"$RELOAD_SCRIPT" --reload /etc/quagga/Quagga.conf
exit $?
;;
status)
check_status $dmn
exit $?
;;
restart|force-reload)
$0 stop $dmn
sleep 1
$0 start $dmn
;;
*)
echo "Usage: /etc/init.d/quagga {start|stop|status|reload|restart|force-reload|<priority>} [daemon]"
echo " E.g. '/etc/init.d/quagga 5' would start all daemons with a prio 1-5."
echo " reload applies only modifications from the running config to all daemons."
echo " reload neither restarts starts any daemon nor starts any new ones."
echo " Read /usr/share/doc/quagga/README.Debian for details."
exit 1
;;
esac
exit 0

2
debian/quagga.install vendored
View File

@ -18,3 +18,5 @@ usr/share/man/man8/watchquagga.8
usr/share/snmp/mibs/
cumulus/etc/* etc/
debian/watchquagga.rc etc/cumulus/ssmonitor.d
debian/*.service lib/systemd/system
debian/quagga.conf usr/lib/tmpfiles.d

34
debian/quagga.service vendored Normal file
View File

@ -0,0 +1,34 @@
[Unit]
Description=Cumulus Linux Quagga convenience service
After=networking.service syslog.service
[Service]
EnvironmentFile=-/etc/default/quagga
Type=simple
RemainAfterExit=yes
TimeoutSec=2m30s
TimeoutStopSec=1m
ExecStartPre=-/bin/systemctl start zebra.service
ExecStartPre=-/bin/systemctl start babeld.service
ExecStartPre=-/bin/systemctl start bgpd.service
ExecStartPre=-/bin/systemctl start isisd.service
ExecStartPre=-/bin/systemctl start ospfd.service
ExecStartPre=-/bin/systemctl start ospf6d.service
ExecStartPre=-/bin/systemctl start ripd.service
ExecStartPre=-/bin/systemctl start ripngd.service
ExecStartPost=-/usr/bin/vtysh -b -n
#
ExecStart=/bin/true
ExecStop=/bin/true
#
ExecStopPost=-/bin/systemctl stop babeld.service
ExecStopPost=-/bin/systemctl stop bgpd.service
ExecStopPost=-/bin/systemctl stop isisd.service
ExecStopPost=-/bin/systemctl stop ospfd.service
ExecStopPost=-/bin/systemctl stop ospf6d.service
ExecStopPost=-/bin/systemctl stop ripd.service
ExecStopPost=-/bin/systemctl stop ripngd.service
ExecStopPost=-/bin/systemctl stop zebra.service
[Install]
WantedBy=network.target

20
debian/ripd.service vendored Normal file
View File

@ -0,0 +1,20 @@
[Unit]
Description=RIP routing daemon
After=syslog.target networking.service zebra.service
OnFailure=heartbeat-failed@%n.service
[Service]
Nice=-5
Type=notify
EnvironmentFile=/etc/default/quagga
StartLimitInterval=3m
StartLimitBurst=3
TimeoutSec=1m
WatchdogSec=60s
RestartSec=5
Restart=on-abnormal
LimitNOFILE=1024
ExecStart=/usr/lib/quagga/ripd $RIPD_OPTIONS
ExecStartPost=/usr/bin/vtysh -b -n
[Install]
WantedBy=network.target

20
debian/ripngd.service vendored Normal file
View File

@ -0,0 +1,20 @@
[Unit]
Description=RIP routing daemon for IPv6
After=syslog.target networking.service zebra.service
OnFailure=heartbeat-failed@%n.service
[Service]
Nice=-5
Type=notify
EnvironmentFile=/etc/default/quagga
StartLimitInterval=3m
StartLimitBurst=3
TimeoutSec=1m
WatchdogSec=60s
RestartSec=5
Restart=on-abnormal
LimitNOFILE=1024
ExecStart=/usr/lib/quagga/ripngd $RIPNGD_OPTIONS
ExecStartPost=/usr/bin/vtysh -b -n
[Install]
WantedBy=network.target

23
debian/rules vendored
View File

@ -66,6 +66,7 @@ override_dh_auto_configure:
--enable-werror \
--enable-gcc-rdynamic \
--with-libpam \
--enable-systemd \
--enable-dependency-tracking; \
fi
if ! diff -b -IHAVE_SNMP -IHAVE_NETSNMP -IUCD_COMPAT -IGETIFADDR debian/my/config.h.reference config.h; then \
@ -112,3 +113,25 @@ override_dh_auto_install:
# cleaning .la files
sed -i "/dependency_libs/ s/'.*'/''/" debian/tmp/usr/lib/*.la
override_dh_systemd_start:
dh_systemd_start quagga.service
dh_systemd_start babeld.service
dh_systemd_start bgpd.service
dh_systemd_start isisd.service
dh_systemd_start ospfd.service
dh_systemd_start ospf6d.service
dh_systemd_start ripd.service
dh_systemd_start ripngd.service
dh_systemd_start zebra.service
override_dh_systemd_enable:
dh_systemd_enable --no-enable quagga.service
dh_systemd_enable --no-enable babeld.service
dh_systemd_enable --no-enable bgpd.service
dh_systemd_enable --no-enable isisd.service
dh_systemd_enable --no-enable ospfd.service
dh_systemd_enable --no-enable ospf6d.service
dh_systemd_enable --no-enable ripd.service
dh_systemd_enable --no-enable ripngd.service
dh_systemd_enable --no-enable zebra.service

20
debian/zebra.service vendored Normal file
View File

@ -0,0 +1,20 @@
[Unit]
Description=Cumulus Linux Quagga Zebra Daemon
After=network.service syslog.service
OnFailure=heartbeat-failed@%n.service
[Service]
Nice=-5
EnvironmentFile=/etc/default/quagga
Type=notify
StartLimitInterval=3m
StartLimitBurst=3
TimeoutSec=1m
WatchdogSec=60s
RestartSec=5
Restart=on-abnormal
LimitNOFILE=1024
ExecStart=/usr/lib/quagga/zebra $ZEBRA_OPTIONS
ExecStartPost=/usr/bin/vtysh -b -n
[Install]
WantedBy=network.target