debianpkg: create frr-snmp and frr-rpki-rtrlib

This splits off SNMP and RPKI support so that users can install these
packages (with the appropriate dependencies) independently of main FRR.
It also obsoletes out the weird multi-variant package distribution we've
been doing for RPKI support.

The snmpd dependency is also changed to Recommends: on frr-snmp since
the frr-snmp package is essentially useless without snmpd.

Signed-off-by: David Lamparter <equinox@diac24.net>

debianpkg/README.Debian

@@ -22,6 +22,36 @@ which itself is a fork of Zebra.
 Zebra was developed by Kunihiro Ishiguro.
 
 
+* Build Profiles used in the upstream debianpkg/
+================================================
+
+The following Build Profiles have been added:
+
+- pkg.frr.rtrlib (pkg.frr.nortrlib)
+  controls whether the RPKI module is built.
+  Will be enabled by default at some point, adds some extra dependencies.
+
+- pkg.frr.snmp (pkg.frr.nosnmp)
+  controls whether the SNMP module is built, see below for license issues.
+  Will remain default-off as long as the license issue persists.
+
+- pkg.frr.nosystemd
+  Disables both systemd unit file installation as well as watchfrr sd_notify
+  support at startup.  Removes libsystemd dependency.
+
+Note that all options have a "no" form;  if you want to have your decision
+be sticky regardless of changes to what it defaults to, then always use one
+of the two.  For example, all occurrences of <pkg.frr.rtrlib> will at some
+point be replaced with <!pkg.frr.nortrlib>.
+
+The main frr package has the exact same contents regardless of rtrlib or snmp
+choices.  The options only control frr-snmp and frr-rpki-rtrlib packages.
+
+The main frr package does NOT have the same contents if pkg.frr.nosystemd is
+used.  This option should only be used for systems that do not have systemd,
+e.g. Ubuntu 14.04.
+
+
 * Why has SNMP support been disabled?
 =====================================
 FRR used to link against the NetSNMP libraries to provide SNMP
@@ -43,9 +73,7 @@ during the last days before the Sarge release :-(
 
 It is allowed by the used licence mix that you fetch the sources and
 build FRR yourself with SNMP with
-	<remove the "grep ^smux" block at the end of debian/frr.preinst>
+        # apt-get -b source -Ppkg.frr.snmp frr
-        # export WANT_SNMP=1
-        # apt-get -b source frr
 Just distributing it in binary form, linked against OpenSSL, is forbidden.
 
 

debianpkg/control

@@ -23,7 +23,9 @@ Build-Depends:
  libpcre3-dev,
  libpython-dev | libpython3-dev,
  libreadline-dev,
- libsnmp-dev,
+ librtr-dev <pkg.frr.rtrlib>,
+ libsnmp-dev <pkg.frr.snmp>,
+ libssh-dev <pkg.frr.rtrlib>,
  libsystemd-dev <!pkg.frr.nosystemd>,
  pkg-config,
  python (>= 2.7) | python3,
@@ -42,7 +44,6 @@ Depends:
 Pre-Depends: adduser
 Conflicts: zebra, zebra-pj, quagga
 Replaces: zebra, zebra-pj
-Suggests: snmpd
 Description: BGP/OSPF/RIP/RIPng/ISIS/PIM/LDP routing daemon forked from Quagga
  FRR is free software which manages TCP/IP based routing protocols.
  It supports BGP4, BGP4+, OSPFv2, OSPFv3, IS-IS, RIPv1, RIPv2, RIPng,
@@ -51,6 +52,31 @@ Description: BGP/OSPF/RIP/RIPng/ISIS/PIM/LDP routing daemon forked from Quagga
  FRR is a fork of Quagga with an open community model. The main git
  lives on https://github.com/frrouting/frr.git
 
+Package: frr-snmp
+Section: net
+Architecture: any
+Depends:
+ ${misc:Depends},
+ ${shlibs:Depends},
+ frr (= ${binary:Version})
+Recommends: snmpd
+Description: FRRouting SNMP support
+ Adds SNMP support to FRR's daemons by attaching to net-snmp's snmpd
+ through the AgentX protocol.
+Build-Profiles: <pkg.frr.snmp>
+
+Package: frr-rpki-rtrlib
+Section: net
+Architecture: any
+Depends:
+ ${misc:Depends},
+ ${shlibs:Depends},
+ frr (= ${binary:Version})
+Description: FRRouting RTRlib RPKI support
+ Adds RPKI support to FRR's bgpd, allowing validation of BGP routes against
+ cryptographic information stored in WHOIS databases.
+Build-Profiles: <pkg.frr.rtrlib>
+
 Package: frr-dbg
 Architecture: any
 Depends:

debianpkg/frr-rpki-rtrlib.install

@@ -0,0 +1 @@
+usr/lib/frr/modules/bgpd_rpki.so

debianpkg/frr-snmp.install

@@ -0,0 +1,6 @@
+usr/lib/libfrrsnmp.*
+usr/lib/frr/modules/bgpd_snmp.so
+usr/lib/frr/modules/ospfd_snmp.so
+usr/lib/frr/modules/ospf6d_snmp.so
+usr/lib/frr/modules/ripd_snmp.so
+usr/lib/frr/modules/zebra_snmp.so

debianpkg/frr-snmp.lintian-overrides

@@ -0,0 +1 @@
+frr: package-name-doesnt-match-sonames libfrrsnmp0

debianpkg/frr.install

@@ -2,7 +2,12 @@ etc/frr/
 usr/bin/vtysh
 usr/bin/mtracebis
 usr/include/frr/
-usr/lib/
+usr/lib/libfrr.*
+usr/lib/libfrrospfapiclient.*
+usr/lib/frr/*d
+usr/lib/frr/watchfrr
+usr/lib/frr/zebra
+usr/lib/frr/modules/zebra_irdp.so
 usr/share/doc/frr/
 usr/share/man/
 usr/share/yang/

debianpkg/rules

@@ -14,19 +14,8 @@ WANT_OSPFAPI ?= 1
 WANT_BGP_VNC ?= 1
 WANT_CUMULUS_MODE ?= 0
 WANT_MULTIPATH ?= 1
-WANT_SNMP ?= 0
-WANT_RPKI ?= 0
 
 # NOTES:
-#
-# If you use WANT_RPKI, then there is a new dependency for librtr0 package
-#    and a build dependency of the librtr-dev package.
-#    While the librtr0 is added to the depenencies automatically, the build
-#    dependency can't be changed dynamically and building will fail if the
-#    librtr-dev isn't installed during package build
-#    Tested versions of both packages can be found at
-#    https://ci1.netdef.org/browse/RPKI-RTRLIB/latestSuccessful/artifact
-#
 # If multipath is enabled (WANT_MULTIPATH=1), then set number of multipaths here
 #    Please be aware that 0 is NOT disabled, but treated as unlimited
 
@@ -49,14 +38,6 @@ export DH_VERBOSE=1
 export DEB_BUILD_MAINT_OPTIONS = hardening=+all
 export DH_OPTIONS=-v
 
-ifeq ($(WANT_SNMP), 1)
-  USE_SNMP=--enable-snmp
-  $(warning "DEBIAN: SNMP enabled, sorry for your inconvenience")
-else
-  USE_SNMP=--disable-snmp
-  $(warning "DEBIAN: SNMP disabled, see README.Debian")
-endif
-
 ifeq ($(WANT_OSPFAPI), 1)
   USE_OSPFAPI=--enable-ospfapi=yes
 else
@@ -85,18 +66,16 @@ else
   USE_CUMULUS=--enable-cumulus=no
 endif
 
-ifeq ($(WANT_RPKI), 1)
-  USE_RPKI=--enable-rpki
-else
-  USE_RPKI=--disable-rpki
-endif
-
 ifeq ($(WANT_WERROR), 1)
   USE_WERROR=--enable-werror
 else
   USE_WERROR=--disable-werror
 endif
 
+#
+# generic debian options
+#
+
 ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
   DEBIAN_JOBS := $(subst parallel=,,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
 endif
@@ -105,6 +84,22 @@ ifdef DEBIAN_JOBS
 MAKEFLAGS += -j$(DEBIAN_JOBS)
 endif
 
+#
+# build profiles
+#
+
+ifeq ($(filter pkg.frr.rtrlib,$(DEB_BUILD_PROFILES)),)
+  USE_RPKI=--disable-rpki
+else
+  USE_RPKI=--enable-rpki
+endif
+
+ifeq ($(filter pkg.frr.snmp,$(DEB_BUILD_PROFILES)),)
+  USE_SNMP=--disable-snmp
+else
+  USE_SNMP=--enable-snmp
+endif
+
 ifeq ($(filter pkg.frr.nosystemd,$(DEB_BUILD_PROFILES)),)
   DH_WITH_SYSTEMD=systemd,
   USE_SYSTEMD=--enable-systemd=yes

debianpkg/subdir.am

@@ -21,6 +21,9 @@ EXTRA_DIST += \
 	debianpkg/frr-doc.install \
 	debianpkg/frr-doc.lintian-overrides \
 	debianpkg/frr-pythontools.install \
+	debianpkg/frr-rpki-rtrlib.install \
+	debianpkg/frr-snmp.install \
+	debianpkg/frr-snmp.lintian-overrides \
 	debianpkg/frr.conf \
 	debianpkg/frr.dirs \
 	debianpkg/frr.docs \