tests: PIM AutoRP tests expanded

Now with a full AutoRP implementation, we can test AutoRP in a full network setup
beginning with candidate RP announcements all the way through discovery and active RP
selection.

Signed-off-by: Nathan Bahr <nbahr@atcorp.com>

tests/topotests/pim_autorp/r1/frr.conf

@@ -2,15 +2,25 @@
 hostname r1
 password zebra
 log file /tmp/r1-frr.log
+!
 debug pim autorp
 !
 interface r1-eth0
- ip address 10.10.76.1/24
+ ip address 10.0.0.1/24
+ ip igmp
+ ip pim
+!
+interface r1-eth1
+ ip address 10.0.1.1/24
  ip igmp
  ip pim
 !
 ip forwarding
 !
+ip route 10.0.2.0/24 10.0.0.2 50
+ip route 10.0.3.0/24 10.0.0.2 50
+!
 router pim
  autorp discovery
+ rp 10.0.3.4 224.0.1.0/24
 !

tests/topotests/pim_autorp/r2/frr.conf

@@ -2,15 +2,25 @@
 hostname r2
 password zebra
 log file /tmp/r2-frr.log
+!
 debug pim autorp
 !
 interface r2-eth0
- ip address 10.10.76.2/24
+ ip address 10.0.0.2/24
+ ip igmp
+ ip pim
+!
+interface r2-eth1
+ ip address 10.0.2.2/24
  ip igmp
  ip pim
 !
 ip forwarding
 !
+ip route 10.0.1.0/24 10.0.0.1 50
+ip route 10.0.3.0/24 10.0.2.4 50
+!
 router pim
  autorp discovery
+ rp 10.0.3.4 224.0.1.0/24
 !

tests/topotests/pim_autorp/r3/frr.conf

@@ -0,0 +1,26 @@
+!
+hostname r3
+password zebra
+log file /tmp/r3-frr.log
+!
+debug pim autorp
+!
+interface r3-eth0
+ ip address 10.0.1.3/24
+ ip igmp
+ ip pim
+!
+interface r3-eth1
+ ip address 10.0.3.3/24
+ ip igmp
+ ip pim
+!
+ip forwarding
+!
+ip route 10.0.0.0/24 10.0.1.1 50
+ip route 10.0.2.0/24 10.0.3.4 50
+!
+router pim
+ autorp discovery
+ rp 10.0.3.4 224.0.1.0/24
+!

tests/topotests/pim_autorp/r4/frr.conf

@@ -0,0 +1,26 @@
+!
+hostname r4
+password zebra
+log file /tmp/r4-frr.log
+!
+debug pim autorp
+!
+interface r4-eth0
+ ip address 10.0.2.4/24
+ ip igmp
+ ip pim
+!
+interface r4-eth1
+ ip address 10.0.3.4/24
+ ip igmp
+ ip pim
+!
+ip forwarding
+!
+ip route 10.0.0.0/24 10.0.2.2 50
+ip route 10.0.1.0/24 10.0.2.2 50
+!
+router pim
+ autorp discovery
+ rp 10.0.3.4 224.0.1.0/24
+!

tests/topotests/pim_autorp/test_pim_autorp.py

@@ -11,18 +11,14 @@
 import os
 import sys
 import pytest
+import json
 from functools import partial
 
 # pylint: disable=C0413
 # Import topogen and topotest helpers
-from lib import topotest
+from lib.topogen import Topogen, topotest, get_topogen
-from lib.topogen import Topogen, get_topogen
 from lib.topolog import logger
-from lib.pim import (
+from lib.pim import verify_pim_rp_info
-    scapy_send_autorp_raw_packet,
-    verify_pim_rp_info,
-    verify_pim_rp_info_is_empty,
-)
 from lib.common_config import step, write_test_header
 
 from time import sleep
@@ -32,12 +28,25 @@ test_pim_autorp.py: Test general PIM AutoRP functionality
 """
 
 TOPOLOGY = """
-   Basic AutoRP functionality
+   Test PIM AutoRP functionality:
+    AutoRP candidate RP announcements
+    Mapping agent announcement receive and send discovery
+    AutoRP discovery to active RP info
 
             +---+---+                      +---+---+
-    |       |    10.10.76.0/24     |       |
+            |       |     10.0.0.0/24      |       |
-    +  R1   + <------------------> +  R2   |
+            +  R1   +----------------------+  R2   |
             |       | .1                .2 |       |
+            +---+---+ r1-eth0      r2-eth0 +---+---+
+             .1 | r1-eth1              r2-eth1 | .2
+                |                              |
+   10.0.1.0/24  |                              |  10.0.2.0/24
+                |                              |
+             .3 | r3-eth0              r4-eth0 | .4
+            +---+---+ r3-eth1      r4-eth1 +---+---+
+            |       | .3                .4 |       |
+            +  R3   +----------------------+  R4   |
+            |       |      10.0.3.0/24     |       |
             +---+---+                      +---+---+
 """
 
@@ -55,11 +64,14 @@ def build_topo(tgen):
     # Create routers
     tgen.add_router("r1")
     tgen.add_router("r2")
+    tgen.add_router("r3")
+    tgen.add_router("r4")
 
-    # Create link between router 1 and 2
+    # Create topology links
-    switch = tgen.add_switch("s1-2")
+    tgen.add_link(tgen.gears["r1"], tgen.gears["r2"], "r1-eth0", "r2-eth0")
-    switch.add_link(tgen.gears["r1"])
+    tgen.add_link(tgen.gears["r1"], tgen.gears["r3"], "r1-eth1", "r3-eth0")
-    switch.add_link(tgen.gears["r2"])
+    tgen.add_link(tgen.gears["r2"], tgen.gears["r4"], "r2-eth1", "r4-eth0")
+    tgen.add_link(tgen.gears["r3"], tgen.gears["r4"], "r3-eth1", "r4-eth1")
 
 
 def setup_module(mod):
@@ -68,15 +80,6 @@ def setup_module(mod):
     tgen = Topogen(build_topo, mod.__name__)
     tgen.start_topology()
 
-    # Router 1 will be the router configured with "fake" autorp configuration, so give it a default route
-    # to router 2 so that routing to the RP address is not an issue
-    # r1_defrt_setup_cmds = [
-    #     "ip route add default via 10.10.76.1 dev r1-eth0",
-    # ]
-    # for cmd in r1_defrt_setup_cmds:
-    #     tgen.net["r1"].cmd(cmd)
-
-    logger.info("Testing PIM AutoRP support")
     router_list = tgen.routers()
     for rname, router in router_list.items():
         logger.info("Loading router %s" % rname)
@@ -95,8 +98,8 @@ def teardown_module(mod):
     tgen.stop_topology()
 
 
-def test_pim_autorp_discovery_single_rp(request):
+def test_pim_autorp_init(request):
-    "Test PIM AutoRP Discovery with single RP"
+    "Test PIM AutoRP startup with only the static RP"
     tgen = get_topogen()
     tc_name = request.node.name
     write_test_header(tc_name)
@@ -104,37 +107,253 @@ def test_pim_autorp_discovery_single_rp(request):
     if tgen.routers_have_failure():
         pytest.skip(tgen.errors)
 
-    step("Start with no RP configuration")
+    step("Verify start-up with no extra RP configuration")
-    result = verify_pim_rp_info_is_empty(tgen, "r1")
+    expected = json.loads(
-    assert result is True, "Testcase {} :Failed \n Error: {}".format(tc_name, result)
+        """
-
+        {
-    step("Send AutoRP packet from r1 to r2")
+          "10.0.3.4":[
-    # 1 RP(s), hold time 5 secs, 10.10.76.1, group(s) 224.0.0.0/4
+            {
-    data = "01005e00012800127f55cfb1080045c00030700c000008110abe0a0a4c01e000012801f001f0001c798b12010005000000000a0a4c0103010004e0000000"
+              "rpAddress":"10.0.3.4",
-    scapy_send_autorp_raw_packet(tgen, "r1", "r1-eth0", data)
+              "group":"224.0.1.0/24",
-
+              "source":"Static"
-    step("Verify rp-info from AutoRP packet")
+            }
-    result = verify_pim_rp_info(
+          ]
-        tgen,
+        }"""
-        None,
-        "r2",
-        "224.0.0.0/4",
-        "r2-eth0",
-        "10.10.76.1",
-        "AutoRP",
-        False,
-        "ipv4",
-        True,
     )
-    assert result is True, "Testcase {} :Failed \n Error: {}".format(tc_name, result)
+    for rtr in ["r1", "r2", "r3", "r4"]:
+        test_func = partial(
+            topotest.router_json_cmp,
+            tgen.gears[rtr],
+            "show ip pim rp-info json",
+            expected,
+        )
+        _, result = topotest.run_and_expect(test_func, None)
+        assert result is None, "{} does not have correct rp-info".format(rtr)
 
-    step("Verify AutoRP configuration times out")
+    step("Verify start-up with AutoRP only discovery enabled")
-    result = verify_pim_rp_info_is_empty(tgen, "r2")
+    expected = json.loads(
-    assert result is True, "Testcase {} :Failed \n Error: {}".format(tc_name, result)
+        """
+        {
+          "discovery":{
+            "enabled": true
+          },
+          "announce": {
+            "enabled":false
+          },
+          "mapping-agent": {
+            "enabled":false
+          }
+        }"""
+    )
+    for rtr in ["r1", "r2", "r3", "r4"]:
+        test_func = partial(
+            topotest.router_json_cmp,
+            tgen.gears[rtr],
+            "show ip pim autorp json",
+            expected,
+        )
+        _, result = topotest.run_and_expect(test_func, None)
+        assert result is None, "{} does not have correct autorp configuration".format(
+            rtr
+        )
 
 
-def test_pim_autorp_discovery_multiple_rp(request):
+def test_pim_autorp_no_mapping_agent_rp(request):
-    "Test PIM AutoRP Discovery with multiple RP's"
+    "Test PIM AutoRP candidate with no mapping agent"
+    tgen = get_topogen()
+    tc_name = request.node.name
+    write_test_header(tc_name)
+
+    if tgen.routers_have_failure():
+        pytest.skip(tgen.errors)
+
+    # Start a candidate RP on r2
+    tgen.routers()["r2"].vtysh_cmd(
+        """
+        conf
+         router pim
+          autorp announce 10.0.0.2 224.0.0.0/4
+          autorp announce scope 31 interval 1 holdtime 5
+        """
+    )
+
+    # Without a mapping agent, we should still have no RP
+    step("Verify no RP without mapping agent")
+    expected = json.loads(
+        """
+        {
+          "10.0.3.4":[
+            {
+              "rpAddress":"10.0.3.4",
+              "group":"224.0.1.0/24",
+              "source":"Static"
+            }
+          ]
+        }"""
+    )
+    for rtr in ["r1", "r2", "r3", "r4"]:
+        test_func = partial(
+            topotest.router_json_cmp,
+            tgen.gears[rtr],
+            "show ip pim rp-info json",
+            expected,
+        )
+        _, result = topotest.run_and_expect(test_func, None)
+        assert result is None, "{} does not have correct rp-info".format(rtr)
+
+    step("Verify candidate RP in AutoRP on R2")
+    expected = json.loads(
+        """
+        {
+          "discovery":{
+            "enabled": true
+          },
+          "announce": {
+              "enabled":true,
+              "scope":31,
+              "interval":1,
+              "holdtime":5,
+              "rpList":[
+                {
+                  "rpAddress":"10.0.0.2",
+                  "groupRange":"224.0.0.0/4",
+                  "prefixList":"-"
+                }
+              ]
+          },
+          "mapping-agent": {
+            "enabled":false
+          }
+        }"""
+    )
+    test_func = partial(
+        topotest.router_json_cmp, tgen.gears["r2"], "show ip pim autorp json", expected
+    )
+    _, result = topotest.run_and_expect(test_func, None)
+    assert result is None, "{} does not have correct autorp configuration".format("r2")
+
+
+def test_pim_autorp_discovery_rp(request):
+    "Test PIM AutoRP candidate advertised by mapping agent"
+    tgen = get_topogen()
+    tc_name = request.node.name
+    write_test_header(tc_name)
+
+    if tgen.routers_have_failure():
+        pytest.skip(tgen.errors)
+
+    # Start the mapping agent on R1
+    tgen.routers()["r1"].vtysh_cmd(
+        """
+        conf
+         router pim
+          autorp send-rp-discovery source interface r1-eth0
+          autorp send-rp-discovery scope 31 interval 1 holdtime 5
+        """
+    )
+
+    step("Verify rp-info of the only candidate RP")
+    expected = json.loads(
+        """
+        {
+          "10.0.3.4":[
+            {
+              "rpAddress":"10.0.3.4",
+              "group":"224.0.1.0/24",
+              "source":"Static"
+            }
+          ],
+          "10.0.0.2":[
+            {
+              "rpAddress":"10.0.0.2",
+              "group":"224.0.0.0/4",
+              "source":"AutoRP"
+            }
+          ]
+        }"""
+    )
+    for rtr in ["r1", "r2", "r3", "r4"]:
+        test_func = partial(
+            topotest.router_json_cmp,
+            tgen.gears[rtr],
+            "show ip pim rp-info json",
+            expected,
+        )
+        _, result = topotest.run_and_expect(test_func, None)
+        assert result is None, "{} does not have correct rp-info".format(rtr)
+
+    step("Verify mapping-agent in AutoRP on R1")
+    expected = json.loads(
+        """
+        {
+          "announce": {
+            "enabled":false
+          },
+          "mapping-agent": {
+            "enabled":true,
+            "active":true,
+            "scope":31,
+            "interval":1,
+            "holdtime":5,
+            "source":"interface",
+            "interface":"r1-eth0",
+            "address":"10.0.0.1",
+            "rpList":{
+              "10.0.0.2":{
+                "rpAddress":"10.0.0.2",
+                "groupRanges":[
+                  {
+                    "negative":false,
+                    "prefix":"224.0.0.0/4"
+                  }
+                ]
+              }
+            }
+          }
+        }"""
+    )
+    test_func = partial(
+        topotest.router_json_cmp, tgen.gears["r1"], "show ip pim autorp json", expected
+    )
+    _, result = topotest.run_and_expect(test_func, None)
+    assert result is None, "{} does not have correct autorp configuration".format("r1")
+
+    step("Verify AutoRP discovery RP's")
+    expected = json.loads(
+        """
+        {
+          "discovery":{
+            "enabled": true,
+            "rpList":{
+              "10.0.0.2":{
+                "rpAddress":"10.0.0.2",
+                "holdtime":5,
+                "groupRanges":[
+                  {
+                    "negative":false,
+                    "prefix":"224.0.0.0/4"
+                  }
+                ]
+              }
+            }
+          }
+        }"""
+    )
+    for rtr in ["r1", "r2", "r3", "r4"]:
+        test_func = partial(
+            topotest.router_json_cmp,
+            tgen.gears[rtr],
+            "show ip pim autorp json",
+            expected,
+        )
+        _, result = topotest.run_and_expect(test_func, None)
+        assert result is None, "{} does not have correct autorp configuration".format(
+            rtr
+        )
+
+
+def test_pim_autorp_discovery_multiple_rp_same(request):
+    "Test PIM AutoRP Discovery with multiple RP's for same group prefix"
     tgen = get_topogen()
     tc_name = request.node.name
     write_test_header(tc_name)
@@ -142,42 +361,309 @@ def test_pim_autorp_discovery_multiple_rp(request):
     if tgen.routers_have_failure():
         pytest.skip("skipped because of router(s) failure")
 
-    step("Start with no RP configuration")
+    # Start a candidate RP on r3
-    result = verify_pim_rp_info_is_empty(tgen, "r2")
+    tgen.routers()["r3"].vtysh_cmd(
-    assert result is True, "Testcase {} :Failed \n Error: {}".format(tc_name, result)
+        """
-
+        conf
-    step("Send AutoRP packet from r1 to r2")
+         router pim
-    # 2 RP(s), hold time 5 secs, 10.10.76.1, group(s) 224.0.0.0/8, 10.10.76.3, group(s) 225.0.0.0/8
+          autorp announce 10.0.1.3 224.0.0.0/4
-    data = "01005e00012800127f55cfb1080045c0003c700c000008110ab20a0a4c01e000012801f001f000283f5712020005000000000a0a4c0103010008e00000000a0a4c0303010008e1000000"
+          autorp announce scope 31 interval 1 holdtime 5
-    scapy_send_autorp_raw_packet(tgen, "r1", "r1-eth0", data)
+        """
-
-    step("Verify rp-info from AutoRP packet")
-    result = verify_pim_rp_info(
-        tgen,
-        None,
-        "r2",
-        "224.0.0.0/8",
-        "r2-eth0",
-        "10.10.76.1",
-        "AutoRP",
-        False,
-        "ipv4",
-        True,
     )
-    assert result is True, "Testcase {} :Failed \n Error: {}".format(tc_name, result)
+
-    result = verify_pim_rp_info(
+    # The new candidate RP has the same group range but a higher IP, they should all
-        tgen,
+    # switch to this RP
-        None,
+    step("Verify rp-info of the candidate RP with the higher IP")
-        "r2",
+    expected = json.loads(
-        "225.0.0.0/8",
+        """
-        "r2-eth0",
+        {
-        "10.10.76.3",
+          "10.0.3.4":[
-        "AutoRP",
+            {
-        False,
+              "rpAddress":"10.0.3.4",
-        "ipv4",
+              "group":"224.0.1.0/24",
-        True,
+              "source":"Static"
+            }
+          ],
+          "10.0.1.3":[
+            {
+              "rpAddress":"10.0.1.3",
+              "group":"224.0.0.0/4",
+              "source":"AutoRP"
+            }
+          ]
+        }"""
+    )
+    for rtr in ["r1", "r2", "r3", "r4"]:
+        test_func = partial(
+            topotest.router_json_cmp,
+            tgen.gears[rtr],
+            "show ip pim rp-info json",
+            expected,
+        )
+        _, result = topotest.run_and_expect(test_func, None)
+        assert result is None, "{} does not have correct rp-info".format(rtr)
+
+    step("Verify AutoRP discovery RP's")
+    expected = json.loads(
+        """
+        {
+          "discovery":{
+            "enabled": true,
+            "rpList":{
+              "10.0.0.2":{
+                "rpAddress":"10.0.0.2",
+                "holdtime":5,
+                "groupRanges":[
+                  {
+                    "negative":false,
+                    "prefix":"224.0.0.0/4"
+                  }
+                ]
+              },
+              "10.0.1.3":{
+                "rpAddress":"10.0.1.3",
+                "holdtime":5,
+                "groupRanges":[
+                  {
+                    "negative":false,
+                    "prefix":"224.0.0.0/4"
+                  }
+                ]
+              }
+            }
+          }
+        }"""
+    )
+    for rtr in ["r1", "r2", "r3", "r4"]:
+        test_func = partial(
+            topotest.router_json_cmp,
+            tgen.gears[rtr],
+            "show ip pim autorp json",
+            expected,
+        )
+        _, result = topotest.run_and_expect(test_func, None)
+        assert result is None, "{} does not have correct autorp configuration".format(
+            rtr
+        )
+
+
+def test_pim_autorp_discovery_multiple_rp_different(request):
+    "Test PIM AutoRP Discovery with multiple RP's for different group prefixes"
+    tgen = get_topogen()
+    tc_name = request.node.name
+    write_test_header(tc_name)
+
+    if tgen.routers_have_failure():
+        pytest.skip("skipped because of router(s) failure")
+
+    # Switch R3 candidate to prefix list with different groups
+    step("Change R3 candidate to a prefix list")
+    tgen.routers()["r3"].vtysh_cmd(
+        """
+        conf
+         ip prefix-list MYLIST permit 225.0.0.0/8
+         ip prefix-list MYLIST permit 226.0.0.0/8
+         router pim
+          autorp announce 10.0.1.3 group-list MYLIST
+        """
+    )
+
+    # Now that R3 doesn't conflict, we should see both RP's
+    step("Verify rp-info of both candidate RP's")
+    expected = json.loads(
+        """
+        {
+          "10.0.3.4":[
+            {
+              "rpAddress":"10.0.3.4",
+              "group":"224.0.1.0/24",
+              "source":"Static"
+            }
+          ],
+          "10.0.0.2":[
+            {
+              "rpAddress":"10.0.0.2",
+              "group":"224.0.0.0/4",
+              "source":"AutoRP"
+            }
+          ],
+          "10.0.1.3":[
+            {
+              "rpAddress":"10.0.1.3",
+              "prefixList":"__AUTORP_10.0.1.3__",
+              "source":"AutoRP"
+            }
+          ]
+        }"""
+    )
+    for rtr in ["r1", "r2", "r3", "r4"]:
+        test_func = partial(
+            topotest.router_json_cmp,
+            tgen.gears[rtr],
+            "show ip pim rp-info json",
+            expected,
+        )
+        _, result = topotest.run_and_expect(test_func, None)
+        assert result is None, "{} does not have correct rp-info".format(rtr)
+
+    step("Verify AutoRP discovery RP's")
+    expected = json.loads(
+        """
+        {
+          "discovery":{
+            "enabled": true,
+            "rpList":{
+              "10.0.0.2":{
+                "rpAddress":"10.0.0.2",
+                "holdtime":5,
+                "groupRanges":[
+                  {
+                    "negative":false,
+                    "prefix":"224.0.0.0/4"
+                  }
+                ]
+              },
+              "10.0.1.3":{
+                "rpAddress":"10.0.1.3",
+                "holdtime":5,
+                "groupRanges":[
+                  {
+                    "negative":false,
+                    "prefix":"225.0.0.0/8"
+                  },
+                  {
+                    "negative":false,
+                    "prefix":"226.0.0.0/8"
+                  }
+                ]
+              }
+            }
+          }
+        }"""
+    )
+    for rtr in ["r1", "r2", "r3", "r4"]:
+        test_func = partial(
+            topotest.router_json_cmp,
+            tgen.gears[rtr],
+            "show ip pim autorp json",
+            expected,
+        )
+        _, result = topotest.run_and_expect(test_func, None)
+        assert result is None, "{} does not have correct autorp configuration".format(
+            rtr
+        )
+
+
+def test_pim_autorp_discovery_neg_prefixes(request):
+    "Test PIM AutoRP Discovery with negative prefixes"
+    tgen = get_topogen()
+    tc_name = request.node.name
+    write_test_header(tc_name)
+
+    if tgen.routers_have_failure():
+        pytest.skip("skipped because of router(s) failure")
+
+    # Add negative prefixes to the R3 candidate prefix list
+    step("Change R3 candidate prefix list to include overlapping negative prefixes")
+    tgen.routers()["r3"].vtysh_cmd(
+        """
+        conf
+         ip prefix-list MYLIST deny 225.1.0.0/16
+         ip prefix-list MYLIST deny 226.1.0.0/16
+        """
+    )
+
+    step("Verify rp-info stays the same")
+    expected = json.loads(
+        """
+        {
+          "10.0.3.4":[
+            {
+              "rpAddress":"10.0.3.4",
+              "group":"224.0.1.0/24",
+              "source":"Static"
+            }
+          ],
+          "10.0.0.2":[
+            {
+              "rpAddress":"10.0.0.2",
+              "group":"224.0.0.0/4",
+              "source":"AutoRP"
+            }
+          ],
+          "10.0.1.3":[
+            {
+              "rpAddress":"10.0.1.3",
+              "prefixList":"__AUTORP_10.0.1.3__",
+              "source":"AutoRP"
+            }
+          ]
+        }"""
+    )
+    for rtr in ["r1", "r2", "r3", "r4"]:
+        test_func = partial(
+            topotest.router_json_cmp,
+            tgen.gears[rtr],
+            "show ip pim rp-info json",
+            expected,
+        )
+        _, result = topotest.run_and_expect(test_func, None)
+        assert result is None, "{} does not have correct rp-info".format(rtr)
+
+    step("Verify AutoRP discovery RP's")
+    expected = json.loads(
+        """
+        {
+          "discovery":{
+            "enabled": true,
+            "rpList":{
+              "10.0.0.2":{
+                "rpAddress":"10.0.0.2",
+                "holdtime":5,
+                "groupRanges":[
+                  {
+                    "negative":false,
+                    "prefix":"224.0.0.0/4"
+                  }
+                ]
+              },
+              "10.0.1.3":{
+                "rpAddress":"10.0.1.3",
+                "holdtime":5,
+                "groupRanges":[
+                  {
+                    "negative":false,
+                    "prefix":"225.0.0.0/8"
+                  },
+                  {
+                    "negative":false,
+                    "prefix":"226.0.0.0/8"
+                  },
+                  {
+                    "negative":true,
+                    "prefix":"225.1.0.0/16"
+                  },
+                  {
+                    "negative":true,
+                    "prefix":"226.1.0.0/16"
+                  }
+                ]
+              }
+            }
+          }
+        }"""
+    )
+    for rtr in ["r1", "r2", "r3", "r4"]:
+        test_func = partial(
+            topotest.router_json_cmp,
+            tgen.gears[rtr],
+            "show ip pim autorp json",
+            expected,
+        )
+        _, result = topotest.run_and_expect(test_func, None)
+        assert result is None, "{} does not have correct autorp configuration".format(
+            rtr
         )
-    assert result is True, "Testcase {} :Failed \n Error: {}".format(tc_name, result)
 
 
 def test_pim_autorp_discovery_static(request):
@@ -189,142 +675,60 @@ def test_pim_autorp_discovery_static(request):
     if tgen.routers_have_failure():
         pytest.skip("skipped because of router(s) failure")
 
-    step("Start with no RP configuration")
+    # Add in a static RP with a specific range and make sure both are used
-    result = verify_pim_rp_info_is_empty(tgen, "r2")
+    step("Add static RP configuration to r4")
-    assert result is True, "Testcase {} :Failed \n Error: {}".format(tc_name, result)
+    tgen.routers()["r4"].vtysh_cmd(
-
-    step("Add static RP configuration to r2")
-    rnode = tgen.routers()["r2"]
-    rnode.cmd("vtysh -c 'conf t' -c 'router pim' -c 'rp 10.10.76.3 224.0.0.0/4'")
-
-    step("Verify static rp-info from r2")
-    result = verify_pim_rp_info(
-        tgen,
-        None,
-        "r2",
-        "224.0.0.0/4",
-        "r2-eth0",
-        "10.10.76.3",
-        "Static",
-        False,
-        "ipv4",
-        True,
-    )
-    assert result is True, "Testcase {} :Failed \n Error: {}".format(tc_name, result)
-
-    step("Send AutoRP packet from r1 to r2")
-    # 1 RP(s), hold time 5 secs, 10.10.76.1, group(s) 224.0.0.0/4
-    data = "01005e00012800127f55cfb1080045c00030700c000008110abe0a0a4c01e000012801f001f0001c798b12010005000000000a0a4c0103010004e0000000"
-    scapy_send_autorp_raw_packet(tgen, "r1", "r1-eth0", data)
-
-    step("Verify rp-info from AutoRP packet")
-    result = verify_pim_rp_info(
-        tgen,
-        None,
-        "r2",
-        "224.0.0.0/4",
-        "r2-eth0",
-        "10.10.76.1",
-        "AutoRP",
-        False,
-        "ipv4",
-        True,
-    )
-    assert result is True, "Testcase {} :Failed \n Error: {}".format(tc_name, result)
-
-
-def test_pim_autorp_announce_cli(request):
-    "Test PIM AutoRP Announcement CLI commands"
-    tgen = get_topogen()
-    tc_name = request.node.name
-    write_test_header(tc_name)
-
-    if tgen.routers_have_failure():
-        pytest.skip("skipped because of router(s) failure")
-
-    step("Add AutoRP announcement configuration to r1")
-    r1 = tgen.routers()["r1"]
-    r1.vtysh_cmd(
         """
-        conf
+        conf t
          router pim
-          autorp announce holdtime 90
+          rp 10.0.2.2 239.0.0.0/24
-          autorp announce interval 120
+        """
-          autorp announce scope 5
-          autorp announce 10.2.3.4 225.0.0.0/24
-"""
     )
 
-    expected = {
+    step("Verify static rp-info from r4")
-        "discoveryEnabled": True,
+    expected = json.loads(
-        "announce": {
+        """
-            "scope": 5,
+        {
-            "interval": 120,
+          "10.0.3.4":[
-            "holdtime": 90,
+            {
-            "rpList": [
+              "rpAddress":"10.0.3.4",
-                {"rpAddress": "10.2.3.4", "group": "225.0.0.0/24", "prefixList": ""}
+              "group":"224.0.1.0/24",
+              "source":"Static"
+            }
           ],
-        },
+          "10.0.0.2":[
+            {
+              "rpAddress":"10.0.0.2",
+              "group":"224.0.0.0/4",
+              "source":"AutoRP"
             }
-
+          ],
-    test_func = partial(
+          "10.0.1.3":[
-        topotest.router_json_cmp, r1, "show ip pim autorp json", expected
+            {
-    )
+              "rpAddress":"10.0.1.3",
-    _, result = topotest.run_and_expect(test_func, None, count=30, wait=1)
+              "prefixList":"__AUTORP_10.0.1.3__",
-    assertmsg = '"{}" JSON output mismatches'.format(r1.name)
+              "source":"AutoRP"
-    assert result is None, assertmsg
-
-    r1.vtysh_cmd(
-        """
-        conf
-         router pim
-          autorp announce 10.2.3.4 group-list ListA
-"""
-    )
-    expected = {
-        "discoveryEnabled": True,
-        "announce": {
-            "scope": 5,
-            "interval": 120,
-            "holdtime": 90,
-            "rpList": [{"rpAddress": "10.2.3.4", "group": "", "prefixList": "ListA"}],
-        },
             }
+          ],
+          "10.0.2.2":[
+            {
+              "rpAddress":"10.0.2.2",
+              "group":"239.0.0.0/24",
+              "source":"Static"
+            }
+          ]
+        }"""
+    )
 
+    for rtr in ["r4"]:
         test_func = partial(
-        topotest.router_json_cmp, r1, "show ip pim autorp json", expected
+            topotest.router_json_cmp,
+            tgen.gears[rtr],
+            "show ip pim rp-info json",
+            expected,
         )
-    _, result = topotest.run_and_expect(test_func, None, count=30, wait=1)
+        _, result = topotest.run_and_expect(test_func, None)
-    assertmsg = '"{}" JSON output mismatches'.format(r1.name)
+        assert result is None, "{} does not have correct rp-info".format(rtr)
-    assert result is None, assertmsg
-
-
-def test_pim_autorp_announce_group(request):
-    "Test PIM AutoRP Announcement with a single group"
-    tgen = get_topogen()
-    tc_name = request.node.name
-    write_test_header(tc_name)
-
-    if tgen.routers_have_failure():
-        pytest.skip("skipped because of router(s) failure")
-
-    step("Add candidate RP configuration to r1")
-    rnode = tgen.routers()["r1"]
-    rnode.cmd(
-        "vtysh -c 'conf t' -c 'router pim' -c 'send-rp-announce 10.10.76.1 224.0.0.0/4'"
-    )
-    step("Verify Announcement sent data")
-    # TODO: Verify AutoRP mapping agent receives candidate RP announcement
-    # Mapping agent is not yet implemented
-    # sleep(10)
-    step("Change AutoRP Announcement packet parameters")
-    rnode.cmd(
-        "vtysh -c 'conf t' -c 'router pim' -c 'send-rp-announce scope 8 interval 10 holdtime 60'"
-    )
-    step("Verify Announcement sent data")
-    # TODO: Verify AutoRP mapping agent receives updated candidate RP announcement
-    # Mapping agent is not yet implemented
-    # sleep(10)
 
 
 def test_memory_leak():