proxmox-mirrors/mirror_frr
1
0
Fork 0
mirror of https://git.proxmox.com/git/mirror_frr synced 2025-08-07 06:03:10 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

doc: clean up cross references

Browse Source 
Format reference directives and roles to match best practices.

Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This commit is contained in:
Quentin Young 2018-02-01 16:33:14 -05:00
parent 013f9762db
commit 0efdf0fe50
No known key found for this signature in database
GPG Key ID: DAF48E0F57E0834F
25 changed files with 286 additions and 286 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
doc/user/babeld.rst
View File

@ -1,4 +1,4 @@
.. _Babel: .. _babel:
***** *****
Babel Babel
@ -14,13 +14,13 @@ instance is able to perform routing for both IPv4 and IPv6.
FRR implements Babel as described in :rfc:`6126`. FRR implements Babel as described in :rfc:`6126`.
.. _Configuring_babeld: .. _configuring-babeld:
Configuring babeld Configuring babeld
================== ==================
The *babeld* daemon can be invoked with any of the common The *babeld* daemon can be invoked with any of the common
options (:ref:`Common_Invocation_Options`). options (:ref:`common-invocation-options`).
The *zebra* daemon must be running before *babeld* is The *zebra* daemon must be running before *babeld* is
invoked. Also, if *zebra* is restarted then *babeld* invoked. Also, if *zebra* is restarted then *babeld*
@ -29,7 +29,7 @@ must be too.
Configuration of *babeld* is done in its configuration file Configuration of *babeld* is done in its configuration file
:file:`babeld.conf`. :file:`babeld.conf`.
.. _Babel_configuration: .. _babel-configuration:
Babel configuration Babel configuration
=================== ===================
@ -211,7 +211,7 @@ Babel configuration
of very slightly increasing convergence time. The value 0 disables of very slightly increasing convergence time. The value 0 disables
hysteresis, and is suitable for wired networks. The default is 4 s. hysteresis, and is suitable for wired networks. The default is 4 s.
.. _Babel_redistribution: .. _babel-redistribution:
Babel redistribution Babel redistribution
==================== ====================
@ -224,7 +224,7 @@ Babel redistribution
Specify which kind of routes should be redistributed into Babel. Specify which kind of routes should be redistributed into Babel.
.. _Show_Babel_information: .. _show-babel-information:
Show Babel information Show Babel information
====================== ======================

36
doc/user/basic.rst
View File

@ -1,4 +1,4 @@
.. _Basic_commands: .. _basic-commands:
************** **************
Basic commands Basic commands
@ -19,7 +19,7 @@ incoming VTY connections. The routing daemons are:
The following sections discuss commands common to all the routing The following sections discuss commands common to all the routing
daemons. daemons.
.. _Config_Commands: .. _config-commands:
Config Commands Config Commands
=============== ===============
@ -44,7 +44,7 @@ the default config file name. For example, zebra's default config file name is
:file:`zebra.conf`. You can specify a config file using the :option:`-f` or :file:`zebra.conf`. You can specify a config file using the :option:`-f` or
:option:`--config-file` options when starting the daemon. :option:`--config-file` options when starting the daemon.
.. _Basic_Config_Commands: .. _basic-config-commands:
Basic Config Commands Basic Config Commands
--------------------- ---------------------
@ -254,7 +254,7 @@ Basic Config Commands
Restrict vty connections with an access list. Restrict vty connections with an access list.
.. _Sample_Config_File: .. _sample-config-file:
Sample Config File Sample Config File
------------------ ------------------
@ -287,7 +287,7 @@ If a comment character is not the first character of the word, it's a
normal character. So in the above example '!' will not be regarded as a normal character. So in the above example '!' will not be regarded as a
comment and the password is set to 'zebra!password'. comment and the password is set to 'zebra!password'.
.. _Terminal_Mode_Commands: .. _terminal-mode-commands:
Terminal Mode Commands Terminal Mode Commands
====================== ======================
@ -350,7 +350,7 @@ Terminal Mode Commands
Send a message to all logging destinations that are enabled for messages Send a message to all logging destinations that are enabled for messages
of the given severity. of the given severity.
.. _Common_Invocation_Options: .. _common-invocation-options:
Common Invocation Options Common Invocation Options
========================= =========================
@ -408,7 +408,7 @@ These options apply to all |PACKAGE_NAME| daemons.
Print program version. Print program version.
.. _Loadable_Module_Support: .. _loadable-module-support:
Loadable Module Support Loadable Module Support
======================= =======================
@ -438,7 +438,7 @@ If SNMP is enabled during compile-time and installed as part of the package,
the ``snmp`` module can be loaded for the *zebra*, *bgpd*, *ospfd*, *ospf6d* the ``snmp`` module can be loaded for the *zebra*, *bgpd*, *ospfd*, *ospf6d*
and *ripd* daemons. and *ripd* daemons.
The module ignores any options passed to it. Refer to :ref:`SNMP_Support` The module ignores any options passed to it. Refer to :ref:`snmp-support`
for information on its usage. for information on its usage.
The FPM Module The FPM Module
@ -451,9 +451,9 @@ Forwarding Plane Manager ("FPM") API.
The module expects its argument to be either ``netlink`` or ``protobuf``, The module expects its argument to be either ``netlink`` or ``protobuf``,
specifying the encapsulation to use. ``netlink`` is the default, and specifying the encapsulation to use. ``netlink`` is the default, and
``protobuf`` may not be available if the module was built without protobuf ``protobuf`` may not be available if the module was built without protobuf
support. Refer to :ref:`zebra_FIB_push_interface` for more information. support. Refer to :ref:`zebra-fib-push-interface` for more information.
.. _Virtual_Terminal_Interfaces: .. _virtual-terminal-interfaces:
Virtual Terminal Interfaces Virtual Terminal Interfaces
=========================== ===========================
@ -461,7 +461,7 @@ Virtual Terminal Interfaces
VTY -- Virtual Terminal [aka TeletYpe] Interface is a command line VTY -- Virtual Terminal [aka TeletYpe] Interface is a command line
interface (CLI) for user interaction with the routing daemon. interface (CLI) for user interaction with the routing daemon.
.. _VTY_Overview: .. _vty-overview:
VTY Overview VTY Overview
------------ ------------
@ -504,7 +504,7 @@ is no VTY password, one cannot connect to the VTY interface at all.
:kbd:`?` and the ``find`` command are very useful for looking up commands. :kbd:`?` and the ``find`` command are very useful for looking up commands.
.. _VTY_Modes: .. _vty-modes:
VTY Modes VTY Modes
--------- ---------
@ -513,7 +513,7 @@ There are three basic VTY modes:
There are commands that may be restricted to specific VTY modes. There are commands that may be restricted to specific VTY modes.
.. _VTY_View_Mode: .. _vty-view-mode:
VTY View Mode VTY View Mode
^^^^^^^^^^^^^ ^^^^^^^^^^^^^
@ -521,7 +521,7 @@ VTY View Mode
This mode is for read-only access to the CLI. One may exit the mode by This mode is for read-only access to the CLI. One may exit the mode by
leaving the system, or by entering `enable` mode. leaving the system, or by entering `enable` mode.
.. _VTY_Enable_Mode: .. _vty-enable-mode:
VTY Enable Mode VTY Enable Mode
^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^
@ -529,14 +529,14 @@ VTY Enable Mode
This mode is for read-write access to the CLI. One may exit the mode by This mode is for read-write access to the CLI. One may exit the mode by
leaving the system, or by escaping to view mode. leaving the system, or by escaping to view mode.
.. _VTY_Other_Modes: .. _vty-other-modes:
VTY Other Modes VTY Other Modes
^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^
This page is for describing other modes. This page is for describing other modes.
.. _VTY_CLI_Commands: .. _vty-cli-commands:
VTY CLI Commands VTY CLI Commands
---------------- ----------------
@ -544,7 +544,7 @@ VTY CLI Commands
Commands that you may use at the command-line are described in the following Commands that you may use at the command-line are described in the following
three subsubsections. three subsubsections.
.. _CLI_Movement_Commands: .. _cli-movement-commands:
CLI Movement Commands CLI Movement Commands
^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^
@ -571,7 +571,7 @@ means press the Control Key.
Move to the end of the line. Move to the end of the line.
.. _CLI_Editing_Commands: .. _cli-editing-commands:
CLI Editing Commands CLI Editing Commands
^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^

144
doc/user/bgp.rst
View File

@ -1,4 +1,4 @@
.. _BGP: .. _bgp:
*** ***
BGP BGP
@ -12,7 +12,7 @@ de-fact standard of Inter Domain routing protocol. BGP-4 is described in
Many extensions have been added to :rfc:`1771`. :rfc:`2858` provides Many extensions have been added to :rfc:`1771`. :rfc:`2858` provides
multiprotocol support to BGP-4. multiprotocol support to BGP-4.
.. _Starting_BGP: .. _starting-bgp:
Starting BGP Starting BGP
============ ============
@ -22,7 +22,7 @@ current directory first then |INSTALL_PREFIX_ETC|/bgpd.conf. All of bgpd's
command must be configured in :file:`bgpd.conf`. command must be configured in :file:`bgpd.conf`.
*bgpd* specific invocation options are described below. Common options may also *bgpd* specific invocation options are described below. Common options may also
be specified (:ref:`Common_Invocation_Options`). be specified (:ref:`common-invocation-options`).
.. program:: bgpd .. program:: bgpd
@ -44,7 +44,7 @@ be specified (:ref:`Common_Invocation_Options`).
to an internal address, or to run multiple bgpd processes on one host. to an internal address, or to run multiple bgpd processes on one host.
.. _BGP_router: .. _bgp-router:
BGP router BGP router
========== ==========
@ -60,7 +60,7 @@ BGP connection is internal one or external one.
Enable a BGP protocol process with the specified ASN. After Enable a BGP protocol process with the specified ASN. After
this statement you can input any `BGP Commands`. You can not this statement you can input any `BGP Commands`. You can not
create different BGP process under different ASN without create different BGP process under different ASN without
specifying `multiple-instance` (:ref:`Multiple_instance`). specifying `multiple-instance` (:ref:`multiple-instance`).
.. index:: no router bgp ASN .. index:: no router bgp ASN
.. clicmd:: no router bgp ASN .. clicmd:: no router bgp ASN
@ -76,7 +76,7 @@ BGP connection is internal one or external one.
not enabled *bgpd* can't get interface information so `router-id` is set to not enabled *bgpd* can't get interface information so `router-id` is set to
0.0.0.0. So please set router-id by hand. 0.0.0.0. So please set router-id by hand.
.. _BGP_distance: .. _bgp-distance:
BGP distance BGP distance
------------ ------------
@ -93,7 +93,7 @@ BGP distance
.. index:: distance (1-255) A.B.C.D/M word .. index:: distance (1-255) A.B.C.D/M word
.. clicmd:: distance (1-255) A.B.C.D/M word .. clicmd:: distance (1-255) A.B.C.D/M word
.. _BGP_decision_process: .. _bgp-decision-process:
BGP decision process BGP decision process
-------------------- --------------------
@ -126,7 +126,7 @@ The decision process FRR BGP uses to select routes is as follows:
6. MED check 6. MED check
Where routes with a MED were received from the same AS, prefer the route Where routes with a MED were received from the same AS, prefer the route
with the lowest MED. :ref:`BGP_MED`. with the lowest MED. :ref:`bgp-med`.
7. External check 7. External check
@ -141,7 +141,7 @@ The decision process FRR BGP uses to select routes is as follows:
If multi-pathing is enabled, then check whether the routes not yet If multi-pathing is enabled, then check whether the routes not yet
distinguished in preference may be considered equal. If distinguished in preference may be considered equal. If
:ref:`bgp_bestpath_as-path_multipath-relax` is set, all such routes are :ref:`bgp-bestpath-as-path-multipath-relax` is set, all such routes are
considered equal, otherwise routes received via iBGP with identical AS_PATHs considered equal, otherwise routes received via iBGP with identical AS_PATHs
or routes received from eBGP neighbours in the same AS are considered equal. or routes received from eBGP neighbours in the same AS are considered equal.
@ -149,7 +149,7 @@ The decision process FRR BGP uses to select routes is as follows:
Where both routes were received from eBGP peers, then prefer the route Where both routes were received from eBGP peers, then prefer the route
which is already selected. Note that this check is not applied if which is already selected. Note that this check is not applied if
:ref:`bgp_bestpath_compare-routerid` is configured. This check can prevent :ref:`bgp-bestpath-compare-routerid` is configured. This check can prevent
some cases of oscillation. some cases of oscillation.
11. Router-ID check 11. Router-ID check
@ -178,7 +178,7 @@ The decision process FRR BGP uses to select routes is as follows:
sequences should should be taken into account during the BGP best path sequences should should be taken into account during the BGP best path
decision process. decision process.
.. _bgp_bestpath_as-path_multipath-relax: .. _bgp-bestpath-as-path-multipath-relax:
.. index:: bgp bestpath as-path multipath-relax .. index:: bgp bestpath as-path multipath-relax
.. clicmd:: bgp bestpath as-path multipath-relax .. clicmd:: bgp bestpath as-path multipath-relax
@ -186,7 +186,7 @@ The decision process FRR BGP uses to select routes is as follows:
of equal AS_PATH length candidates for multipath computation. Without of equal AS_PATH length candidates for multipath computation. Without
the knob, the entire AS_PATH must match for multipath computation. the knob, the entire AS_PATH must match for multipath computation.
.. _bgp_bestpath_compare-routerid: .. _bgp-bestpath-compare-routerid:
.. clicmd:: bgp bestpath compare-routerid .. clicmd:: bgp bestpath compare-routerid
Ensure that when comparing routes where both are equal on most metrics, Ensure that when comparing routes where both are equal on most metrics,
@ -208,7 +208,7 @@ The decision process FRR BGP uses to select routes is as follows:
sensitive to the iBGP and reflection topology. sensitive to the iBGP and reflection topology.
.. _BGP_route_flap_dampening: .. _bgp-route-flap-dampening:
BGP route flap dampening BGP route flap dampening
------------------------ ------------------------
@ -238,7 +238,7 @@ BGP route flap dampening
`http://www.ripe.net/ripe/docs/ripe-378,,RIPE-378 <http://www.ripe.net/ripe/docs/ripe-378,,RIPE-378>`_ `http://www.ripe.net/ripe/docs/ripe-378,,RIPE-378 <http://www.ripe.net/ripe/docs/ripe-378,,RIPE-378>`_
.. _BGP_MED: .. _bgp-med:
BGP MED BGP MED
======= =======
@ -312,7 +312,7 @@ updates may be produced than at other times in reaction to some event .
This first issue can be fixed with a more deterministic route selection that This first issue can be fixed with a more deterministic route selection that
ensures routes are ordered by the neighbouring AS during selection. ensures routes are ordered by the neighbouring AS during selection.
:ref:`bgp_deterministic-med`. This may reduce the number of updates as routes :ref:`bgp-deterministic-med`. This may reduce the number of updates as routes
are received, and may in some cases reduce routing churn. Though, it could are received, and may in some cases reduce routing churn. Though, it could
equally deterministically produce the largest possible set of updates in equally deterministically produce the largest possible set of updates in
response to the most common sequence of received updates. response to the most common sequence of received updates.
@ -389,7 +389,7 @@ avoided by speakers preferring already selected, external routes rather than
choosing to update to new a route based on a post-MED metric (e.g. router-ID), choosing to update to new a route based on a post-MED metric (e.g. router-ID),
at the cost of a non-deterministic selection process. FRR implements this, as at the cost of a non-deterministic selection process. FRR implements this, as
do many other implementations, so long as it is not overridden by setting do many other implementations, so long as it is not overridden by setting
:ref:`bgp_bestpath_compare-routerid`, and see also :ref:`BGP_decision_process`, :ref:`bgp-bestpath-compare-routerid`, and see also :ref:`bgp-decision-process`,
. .
However, more complex and insidious cycles of oscillation are possible with However, more complex and insidious cycles of oscillation are possible with
@ -442,7 +442,7 @@ topologies are at cross-purposes with each other - see the Flavel and Roughan
paper above for an example. Hence the guideline that the iBGP topology should paper above for an example. Hence the guideline that the iBGP topology should
follow the IGP topology. follow the IGP topology.
.. _bgp_deterministic-med: .. _bgp-deterministic-med:
.. index:: bgp deterministic-med .. index:: bgp deterministic-med
.. clicmd:: bgp deterministic-med .. clicmd:: bgp deterministic-med
@ -462,9 +462,9 @@ follow the IGP topology.
Note that there are other sources of indeterminism in the route selection Note that there are other sources of indeterminism in the route selection
process, specifically, the preference for older and already selected routes process, specifically, the preference for older and already selected routes
from eBGP peers, :ref:`BGP_decision_process`. from eBGP peers, :ref:`bgp-decision-process`.
.. _bgp_always-compare-med: .. _bgp-always-compare-med:
.. index:: bgp always-compare-med .. index:: bgp always-compare-med
.. clicmd:: bgp always-compare-med .. clicmd:: bgp always-compare-med
@ -475,20 +475,20 @@ from eBGP peers, :ref:`BGP_decision_process`.
oscillations. oscillations.
If using this option, it may also be desirable to use If using this option, it may also be desirable to use
:ref:`routemap_set_metric` to set MED to 0 on routes received from external :ref:`routemap-set-metric` to set MED to 0 on routes received from external
neighbours. neighbours.
This option can be used, together with :ref:`routemap_set_metric` to use MED This option can be used, together with :ref:`routemap-set-metric` to use MED
as an intra-AS metric to steer equal-length AS_PATH routes to, e.g., desired as an intra-AS metric to steer equal-length AS_PATH routes to, e.g., desired
exit points. exit points.
.. _BGP_network: .. _bgp-network:
BGP network BGP network
=========== ===========
.. _BGP_route: .. _bgp-route:
BGP route BGP route
--------- ---------
@ -512,7 +512,7 @@ BGP route
.. clicmd:: no network A.B.C.D/M .. clicmd:: no network A.B.C.D/M
.. _Route_Aggregation: .. _route-aggregation:
Route Aggregation Route Aggregation
----------------- -----------------
@ -539,7 +539,7 @@ Route Aggregation
.. _Redistribute_to_BGP: .. _redistribute-to-bgp:
Redistribute to BGP Redistribute to BGP
------------------- -------------------
@ -615,12 +615,12 @@ Redistribute to BGP
Supported for ipv4 and ipv6 address families. It works on multi-paths as Supported for ipv4 and ipv6 address families. It works on multi-paths as
well, however, metric setting is based on the best-path only. well, however, metric setting is based on the best-path only.
.. _BGP_Peer: .. _bgp-peer:
BGP Peer BGP Peer
======== ========
.. _Defining_Peer: .. _defining-peer:
Defining Peer Defining Peer
------------- -------------
@ -643,7 +643,7 @@ Defining Peer
can't find neighbor 10.0.0.1 can't find neighbor 10.0.0.1
.. _BGP_Peer_commands: .. _bgp-peer-commands:
BGP Peer commands BGP Peer commands
----------------- -----------------
@ -809,7 +809,7 @@ required.
specified number of hops away will be allowed to become neighbors. This specified number of hops away will be allowed to become neighbors. This
command is mututally exclusive with *ebgp-multihop*. command is mututally exclusive with *ebgp-multihop*.
.. _Peer_filtering: .. _peer-filtering:
Peer filtering Peer filtering
-------------- --------------
@ -838,7 +838,7 @@ Peer filtering
on reflected routes. This option allows the modifications to be reflected as on reflected routes. This option allows the modifications to be reflected as
well. Once enabled, it affects all reflected routes. well. Once enabled, it affects all reflected routes.
.. _BGP_Peer_Group: .. _bgp-peer-group:
BGP Peer Group BGP Peer Group
============== ==============
@ -853,7 +853,7 @@ BGP Peer Group
This command bind specific peer to peer group WORD. This command bind specific peer to peer group WORD.
.. _BGP_Address_Family: .. _bgp-address-family:
BGP Address Family BGP Address Family
================== ==================
@ -881,7 +881,7 @@ Encapsulation attribute :rfc:`5512` is supported.
Print a summary of neighbor connections for the specified AFI/SAFI combination. Print a summary of neighbor connections for the specified AFI/SAFI combination.
.. _Autonomous_System: .. _autonomous-system:
Autonomous System Autonomous System
================= =================
@ -895,7 +895,7 @@ The AS number is a two octet value, ranging in value from 1 to 65535. The AS
numbers 64512 through 65535 are defined as private AS numbers. Private AS numbers 64512 through 65535 are defined as private AS numbers. Private AS
numbers must not to be advertised in the global Internet. numbers must not to be advertised in the global Internet.
.. _Display_BGP_Routes_by_AS_Path: .. _display-bgp-routes-by-as-path:
Display BGP Routes by AS Path Display BGP Routes by AS Path
----------------------------- -----------------------------
@ -907,9 +907,9 @@ can be used.
.. clicmd:: show bgp ipv4|ipv6 regexp LINE .. clicmd:: show bgp ipv4|ipv6 regexp LINE
This commands displays BGP routes that matches a regular This commands displays BGP routes that matches a regular
expression `line` (:ref:`BGP_Regular_Expressions`). expression `line` (:ref:`bgp-regular-expressions`).
.. _AS_Path_Access_List: .. _as-path-access-list:
AS Path Access List AS Path Access List
------------------- -------------------
@ -927,7 +927,7 @@ AS path access list is user defined AS path.
.. index:: no ip as-path access-list WORD permit|deny LINE .. index:: no ip as-path access-list WORD permit|deny LINE
.. clicmd:: no ip as-path access-list WORD permit|deny LINE .. clicmd:: no ip as-path access-list WORD permit|deny LINE
.. _Using_AS_Path_in_Route_Map: .. _using-as-path-in-route-map:
Using AS Path in Route Map Using AS Path in Route Map
-------------------------- --------------------------
@ -946,12 +946,12 @@ Using AS Path in Route Map
Prepend the existing last AS number (the leftmost ASN) to the AS_PATH. Prepend the existing last AS number (the leftmost ASN) to the AS_PATH.
.. _Private_AS_Numbers: .. _private-as-numbers:
Private AS Numbers Private AS Numbers
------------------ ------------------
.. _BGP_Communities_Attribute: .. _bgp-communities-attribute:
BGP Communities Attribute BGP Communities Attribute
========================= =========================
@ -999,7 +999,7 @@ When BGP communities attribute is received, duplicated communities value in the
communities attribute is ignored and each communities values are sorted in communities attribute is ignored and each communities values are sorted in
numerical order. numerical order.
.. _BGP_Community_Lists: .. _bgp-community-lists:
BGP Community Lists BGP Community Lists
------------------- -------------------
@ -1032,7 +1032,7 @@ expanded community list.
This command defines a new expanded community list. COMUNITY is a This command defines a new expanded community list. COMUNITY is a
string expression of communities attribute. COMUNITY can be a string expression of communities attribute. COMUNITY can be a
regular expression (:ref:`BGP_Regular_Expressions`) to match regular expression (:ref:`bgp-regular-expressions`) to match
the communities attribute in BGP updates. the communities attribute in BGP updates.
.. index:: no ip community-list NAME .. index:: no ip community-list NAME
@ -1072,7 +1072,7 @@ expanded community list.
deny internet deny internet
.. _Numbered_BGP_Community_Lists: .. _numbered-bgp-community-lists:
Numbered BGP Community Lists Numbered BGP Community Lists
---------------------------- ----------------------------
@ -1108,12 +1108,12 @@ is called as named community lists.
Otherwise it is defined as an expanded community list. This feature is left Otherwise it is defined as an expanded community list. This feature is left
for backward compability. Use of this feature is not recommended. for backward compability. Use of this feature is not recommended.
.. _BGP_Community_in_Route_Map: .. _bgp-community-in-route-map:
BGP Community in Route Map BGP Community in Route Map
-------------------------- --------------------------
In Route Map (:ref:`Route_Map`), we can match or set BGP In Route Map (:ref:`route-map`), we can match or set BGP
communities attribute. Using this feature network operator can communities attribute. Using this feature network operator can
implement their network policy based on BGP communities attribute. implement their network policy based on BGP communities attribute.
@ -1158,7 +1158,7 @@ Following commands can be used in Route Map.
is removed. When all of communities value is removed eventually, the is removed. When all of communities value is removed eventually, the
BGP update's communities attribute is completely removed. BGP update's communities attribute is completely removed.
.. _Display_BGP_Routes_by_Community: .. _display-bgp-routes-by-community:
Display BGP Routes by Community Display BGP Routes by Community
------------------------------- -------------------------------
@ -1193,7 +1193,7 @@ To show BGP routes which has specific BGP communities attribute,
community list `word`. When `exact-match` is specified, display only community list `word`. When `exact-match` is specified, display only
routes that have an exact match. routes that have an exact match.
.. _Using_BGP_Communities_Attribute: .. _using-bgp-communities-attribute:
Using BGP Communities Attribute Using BGP Communities Attribute
------------------------------- -------------------------------
@ -1311,7 +1311,7 @@ community-list is used. `deny` community-list is ignored.::
set comm-list DEL delete set comm-list DEL delete
.. _BGP_Extended_Communities_Attribute: .. _bgp-extended-communities-attribute:
BGP Extended Communities Attribute BGP Extended Communities Attribute
================================== ==================================
@ -1346,7 +1346,7 @@ the other is IP address based format.
`VAL` part is 2 octets Local Administrator subfield. `VAL` part is 2 octets Local Administrator subfield.
`10.0.0.1:100` represents `10.0.0.1:100` represents
.. _BGP_Extended_Community_Lists: .. _bgp-extended-community-lists:
BGP Extended Community Lists BGP Extended Community Lists
---------------------------- ----------------------------
@ -1372,7 +1372,7 @@ Lists.
This command defines a new expanded extcommunity-list. `line` is This command defines a new expanded extcommunity-list. `line` is
a string expression of extended communities attribute. `line` can a string expression of extended communities attribute. `line` can
be a regular expression (:ref:`BGP_Regular_Expressions`) to match an be a regular expression (:ref:`bgp-regular-expressions`) to match an
extended communities attribute in BGP updates. extended communities attribute in BGP updates.
.. index:: no ip extcommunity-list NAME .. index:: no ip extcommunity-list NAME
@ -1403,7 +1403,7 @@ Lists.
# show ip extcommunity-list # show ip extcommunity-list
.. _BGP_Extended_Communities_in_Route_Map: .. _bgp-extended-communities-in-route-map:
BGP Extended Communities in Route Map BGP Extended Communities in Route Map
------------------------------------- -------------------------------------
@ -1422,7 +1422,7 @@ BGP Extended Communities in Route Map
This command set Site of Origin value. This command set Site of Origin value.
.. _BGP_Large_Communities_Attribute: .. _bgp-large-communities-attribute:
BGP Large Communities Attribute BGP Large Communities Attribute
=============================== ===============================
@ -1451,7 +1451,7 @@ AS4 operators seamless use.
function 1 and parameter 10. function 1 and parameter 10.
The referenced RFC above gives some guidelines on recommended usage. The referenced RFC above gives some guidelines on recommended usage.
.. _BGP_Large_Community_Lists: .. _bgp-large-community-lists:
BGP Large Community Lists BGP Large Community Lists
------------------------- -------------------------
@ -1507,7 +1507,7 @@ Two types of large community lists are supported, namely `standard` and
This command displays the current large communities in use. This command displays the current large communities in use.
.. _BGP_Large_Communities_in_Route_Map: .. _bgp-large-communities-in-route-map:
BGP Large Communities in Route Map BGP Large Communities in Route Map
---------------------------------- ----------------------------------
@ -1535,13 +1535,13 @@ BGP Large Communities in Route Map
large-community list. The third will add a large-community value without large-community list. The third will add a large-community value without
overwriting other values. Multiple large-community values can be specified. overwriting other values. Multiple large-community values can be specified.
.. _Displaying_BGP_information: .. _displaying-bgp-information:
Displaying BGP information Displaying BGP information
========================== ==========================
.. _Showing_BGP_information: .. _showing-bgp-information:
Showing BGP information Showing BGP information
----------------------- -----------------------
@ -1574,7 +1574,7 @@ Showing BGP information
.. clicmd:: show ip bgp regexp LINE .. clicmd:: show ip bgp regexp LINE
This command displays BGP routes using AS path regular expression This command displays BGP routes using AS path regular expression
(:ref:`BGP_Regular_Expressions`). (:ref:`bgp-regular-expressions`).
.. index:: show ip bgp community COMMUNITY .. index:: show ip bgp community COMMUNITY
.. clicmd:: show ip bgp community COMMUNITY .. clicmd:: show ip bgp community COMMUNITY
@ -1582,7 +1582,7 @@ Showing BGP information
.. index:: show ip bgp community COMMUNITY exact-match .. index:: show ip bgp community COMMUNITY exact-match
.. clicmd:: show ip bgp community COMMUNITY exact-match .. clicmd:: show ip bgp community COMMUNITY exact-match
This command displays BGP routes using `community` (:ref:`Display_BGP_Routes_by_Community`). This command displays BGP routes using `community` (:ref:`display-bgp-routes-by-community`).
.. index:: show ip bgp community-list WORD .. index:: show ip bgp community-list WORD
.. clicmd:: show ip bgp community-list WORD .. clicmd:: show ip bgp community-list WORD
@ -1590,7 +1590,7 @@ Showing BGP information
.. index:: show ip bgp community-list WORD exact-match .. index:: show ip bgp community-list WORD exact-match
.. clicmd:: show ip bgp community-list WORD exact-match .. clicmd:: show ip bgp community-list WORD exact-match
This command displays BGP routes using community list (:ref:`Display_BGP_Routes_by_Community`). This command displays BGP routes using community list (:ref:`display-bgp-routes-by-community`).
.. index:: show bgp ipv4|ipv6 summary .. index:: show bgp ipv4|ipv6 summary
.. clicmd:: show bgp ipv4|ipv6 summary .. clicmd:: show bgp ipv4|ipv6 summary
@ -1612,7 +1612,7 @@ Showing BGP information
Display flap statistics of routes. Display flap statistics of routes.
.. _Other_BGP_commands: .. _other-bgp-commands:
Other BGP commands Other BGP commands
------------------ ------------------
@ -1654,7 +1654,7 @@ Other BGP commands
.. clicmd:: no debug keepalive .. clicmd:: no debug keepalive
.. _Capability_Negotiation: .. _capability-negotiation:
Capability Negotiation Capability Negotiation
====================== ======================
@ -1733,7 +1733,7 @@ If you want to completely match capabilities with remote peer. Please use
Override the result of Capability Negotiation with local configuration. Override the result of Capability Negotiation with local configuration.
Ignore remote peer's capability value. Ignore remote peer's capability value.
.. _Route_Reflector: .. _route-reflector:
Route Reflector Route Reflector
=============== ===============
@ -1748,7 +1748,7 @@ Route Reflector
.. clicmd:: no neighbor PEER route-reflector-client .. clicmd:: no neighbor PEER route-reflector-client
.. _Route_Server: .. _route-server:
Route Server Route Server
============ ============
@ -1768,7 +1768,7 @@ managing different routing policies for each BGP speaker. We call the routing
tables as different "views". *bgpd* can work as normal BGP router or Route tables as different "views". *bgpd* can work as normal BGP router or Route
Server or both at the same time. Server or both at the same time.
.. _Multiple_instance: .. _multiple-instance:
Multiple instance Multiple instance
----------------- -----------------
@ -1837,7 +1837,7 @@ to specify *neighbor A.B.C.D send-community* command.::
FRR style BGP configuration. This is default. FRR style BGP configuration. This is default.
.. _BGP_instance_and_view: .. _bgp-instance-and-view:
BGP instance and view BGP instance and view
--------------------- ---------------------
@ -1889,7 +1889,7 @@ only for exchanging BGP routing information.
neighbor 10.0.0.4 remote-as 5 neighbor 10.0.0.4 remote-as 5
.. _Routing_policy: .. _routing-policy:
Routing policy Routing policy
-------------- --------------
@ -1917,7 +1917,7 @@ This means BGP update from a peer 10.0.0.1 goes to both BGP view 1 and view
applied. On the other hand, when the update is inserted into view 2, applied. On the other hand, when the update is inserted into view 2,
distribute-list 2 is applied. distribute-list 2 is applied.
.. _Viewing_the_view: .. _viewing-the-view:
Viewing the view Viewing the view
---------------- ----------------
@ -1929,7 +1929,7 @@ To display routing table of BGP view, you must specify view name.
Display routing table of BGP view ``NAME``. Display routing table of BGP view ``NAME``.
.. _BGP_Regular_Expressions: .. _bgp-regular-expressions:
BGP Regular Expressions BGP Regular Expressions
======================= =======================
@ -1965,7 +1965,7 @@ _
the end of the line. So `_` can be used for AS value boundaries match. This the end of the line. So `_` can be used for AS value boundaries match. This
character technically evaluates to `(^|[,{}() ]|$)`. character technically evaluates to `(^|[,{}() ]|$)`.
.. _How_to_set_up_a_6-Bone_connection: .. _How-to-set-up-a-6-Bone-connection:
How to set up a 6-Bone connection How to set up a 6-Bone connection
================================= =================================
@ -2014,7 +2014,7 @@ How to set up a 6-Bone connection
! !
.. _Dump_BGP_packets_and_table: .. _dump-bgp-packets-and-table:
Dump BGP packets and table Dump BGP packets and table
========================== ==========================
@ -2031,8 +2031,8 @@ Dump BGP packets and table
Dump all BGP packet and events to `path` file. Dump all BGP packet and events to `path` file.
If `interval` is set, a new file will be created for echo `interval` of seconds. If `interval` is set, a new file will be created for echo `interval` of seconds.
The path `path` can be set with date and time formatting (strftime). The path `path` can be set with date and time formatting (strftime).
The type ‘all-et’ enables support for Extended Timestamp Header (:ref:`Packet_Binary_Dump_Format`). The type ‘all-et’ enables support for Extended Timestamp Header (:ref:`packet-binary-dump-format`).
(:ref:`Packet_Binary_Dump_Format`) (:ref:`packet-binary-dump-format`)
.. index:: dump bgp updates PATH [INTERVAL] .. index:: dump bgp updates PATH [INTERVAL]
.. clicmd:: dump bgp updates PATH [INTERVAL] .. clicmd:: dump bgp updates PATH [INTERVAL]
@ -2046,7 +2046,7 @@ Dump BGP packets and table
Dump only BGP updates messages to `path` file. Dump only BGP updates messages to `path` file.
If `interval` is set, a new file will be created for echo `interval` of seconds. If `interval` is set, a new file will be created for echo `interval` of seconds.
The path `path` can be set with date and time formatting (strftime). The path `path` can be set with date and time formatting (strftime).
The type ‘updates-et’ enables support for Extended Timestamp Header (:ref:`Packet_Binary_Dump_Format`). The type ‘updates-et’ enables support for Extended Timestamp Header (:ref:`packet-binary-dump-format`).
.. index:: dump bgp routes-mrt PATH .. index:: dump bgp routes-mrt PATH
.. clicmd:: dump bgp routes-mrt PATH .. clicmd:: dump bgp routes-mrt PATH
@ -2299,7 +2299,7 @@ flaws.
set community additive 64512:3200 set community additive 64512:3200
.. _Configuring_FRR_as_a_Route_Server: .. _configuring-frr-as-a-route-server:
Configuring FRR as a Route Server Configuring FRR as a Route Server
================================= =================================

12
doc/user/eigrpd.rst
View File

@ -1,4 +1,4 @@
.. _EIGRP: .. _eigrp:
***** *****
EIGRP EIGRP
@ -13,7 +13,7 @@ known topology.
*eigrpd* supports EIGRP as described in RFC7868 *eigrpd* supports EIGRP as described in RFC7868
.. _Starting_and_Stopping_eigrpd: .. _starting-and-stopping-eigrpd:
Starting and Stopping eigrpd Starting and Stopping eigrpd
============================ ============================
@ -50,7 +50,7 @@ Certain signals have special meanings to *eigrpd*.
*eigrpd* invocation options. Common options that can be specified *eigrpd* invocation options. Common options that can be specified
(:ref:`Common_Invocation_Options`). (:ref:`common-invocation-options`).
.. program:: eigrpd .. program:: eigrpd
@ -59,7 +59,7 @@ Certain signals have special meanings to *eigrpd*.
When the program terminates, retain routes added by *eigrpd*. When the program terminates, retain routes added by *eigrpd*.
.. _EIGRP_Configuration: .. _eigrp-configuration:
EIGRP Configuration EIGRP Configuration
=================== ===================
@ -116,7 +116,7 @@ EIGRP Configuration
The default is to be passive on all interfaces. The default is to be passive on all interfaces.
.. _How_to_Announce_EIGRP_route: .. _how-to-announce-eigrp-route:
How to Announce EIGRP route How to Announce EIGRP route
=========================== ===========================
@ -183,7 +183,7 @@ How to Announce EIGRP route
`redistribute bgp` redistributes routing information from bgp route entries `redistribute bgp` redistributes routing information from bgp route entries
into the EIGRP tables. `no redistribute bgp` disables the routes. into the EIGRP tables. `no redistribute bgp` disables the routes.
.. _Show_EIGRP_Information: .. _show-eigrp-information:
Show EIGRP Information Show EIGRP Information
====================== ======================

6
doc/user/filter.rst
View File

@ -87,7 +87,7 @@ is defined, and no match is found, default deny is applied.
.. index:: no ip prefix-list NAME .. index:: no ip prefix-list NAME
.. clicmd:: no ip prefix-list NAME .. clicmd:: no ip prefix-list NAME
.. _ip_prefix-list_description: .. _ip-prefix-list-description:
ip prefix-list description ip prefix-list description
-------------------------- --------------------------
@ -104,7 +104,7 @@ ip prefix-list description
Deletes the description from a prefix list. It is possible to use the Deletes the description from a prefix list. It is possible to use the
command without the full description. command without the full description.
.. _ip_prefix-list_sequential_number_control: .. _ip-prefix-list-sequential-number-control:
ip prefix-list sequential number control ip prefix-list sequential number control
---------------------------------------- ----------------------------------------
@ -121,7 +121,7 @@ ip prefix-list sequential number control
With this command, the IP prefix list sequential number is not With this command, the IP prefix list sequential number is not
displayed. displayed.
.. _Showing_ip_prefix-list: .. _Showing-ip-prefix-list:
Showing ip prefix-list Showing ip prefix-list
---------------------- ----------------------

24
doc/user/installation.rst
View File

@ -1,4 +1,4 @@
.. _Installation: .. _installation:
************ ************
Installation Installation
@ -26,13 +26,13 @@ issue the following commands:
$ make install $ make install
.. _Configure_the_Software: .. _configure-the-software:
Configure the Software Configure the Software
====================== ======================
.. _The_Configure_Script: .. _the-configure-script:
The Configure Script The Configure Script
-------------------- --------------------
@ -190,7 +190,7 @@ options to the configuration script.
Configure zebra to use `dir` for local state files, such as pid files and Configure zebra to use `dir` for local state files, such as pid files and
unix sockets. unix sockets.
.. _Least-Privilege_support: .. _Least-Privilege-support:
Least-Privilege Support Least-Privilege Support
----------------------- -----------------------
@ -231,7 +231,7 @@ only Linux), FRR will retain only minimal capabilities required and will only
raise these capabilities for brief periods. On systems without libcap, FRR will raise these capabilities for brief periods. On systems without libcap, FRR will
run as the user specified and only raise its UID to 0 for brief periods. run as the user specified and only raise its UID to 0 for brief periods.
.. _Linux_Notes: .. _linux-notes:
Linux Notes Linux Notes
----------- -----------
@ -250,16 +250,16 @@ do exist.
- :makevar:`CONFIG_NETLINK` - :makevar:`CONFIG_NETLINK`
Kernel/User netlink socket. This is a brand new feature which enables an Kernel/User netlink socket. This is a brand new feature which enables an
advanced interface between the Linux kernel and zebra (:ref:`Kernel_Interface`). advanced interface between the Linux kernel and zebra (:ref:`kernel-interface`).
- :makevar:`CONFIG_RTNETLINK` - :makevar:`CONFIG_RTNETLINK`
Routing messages. Routing messages.
This makes it possible to receive netlink routing messages. If you This makes it possible to receive netlink routing messages. If you
specify this option, *zebra* can detect routing information specify this option, *zebra* can detect routing information
updates directly from the kernel (:ref:`Kernel_Interface`). updates directly from the kernel (:ref:`kernel-interface`).
- :makevar:`CONFIG_IP_MULTICAST` - :makevar:`CONFIG_IP_MULTICAST`
IP: multicasting. IP: multicasting.
This option should be specified when you use *ripd* (:ref:`RIP`) or This option should be specified when you use *ripd* (:ref:`rip`) or
*ospfd* (:ref:`OSPFv2`) because these protocols use multicast. *ospfd* (:ref:`ospfv2`) because these protocols use multicast.
IPv6 support has been added in GNU/Linux kernel version 2.2. If you IPv6 support has been added in GNU/Linux kernel version 2.2. If you
try to use the FRR IPv6 feature on a GNU/Linux kernel, please try to use the FRR IPv6 feature on a GNU/Linux kernel, please
@ -281,7 +281,7 @@ or upper.
utility. It contains *ifconfig*, *route*, *netstat*, and other tools. utility. It contains *ifconfig*, *route*, *netstat*, and other tools.
`net-tools` may be found at http://www.tazenda.demon.co.uk/phil/net-tools/. `net-tools` may be found at http://www.tazenda.demon.co.uk/phil/net-tools/.
.. _Build_the_Software: .. _build-the-software:
Build the Software Build the Software
================== ==================
@ -290,7 +290,7 @@ After configuring the software, you will need to compile it for your system.
Simply issue the command *make* in the root of the source directory and the Simply issue the command *make* in the root of the source directory and the
software will be compiled. Cliff Notes versions of different compilation software will be compiled. Cliff Notes versions of different compilation
examples can be found in the Developer's Manual Appendix. If you have *any* examples can be found in the Developer's Manual Appendix. If you have *any*
problems at this stage, please send a bug report :ref:`Bug-Reports`. problems at this stage, please send a bug report :ref:`bug-reports`.
:: ::
@ -337,6 +337,6 @@ specify a port number when starting the daemon, these entries may not be
needed. needed.
You may need to make changes to the config files in You may need to make changes to the config files in
|INSTALL_PREFIX_ETC|. :ref:`Config_Commands`. |INSTALL_PREFIX_ETC|. :ref:`config-commands`.
.. [#] GNU/Linux has very flexible kernel configuration features. .. [#] GNU/Linux has very flexible kernel configuration features.

2
doc/user/ipv6.rst
View File

@ -1,4 +1,4 @@
.. _IPv6_Support: .. _IPv6-Support:
************ ************
IPv6 Support IPv6 Support

26
doc/user/isisd.rst
View File

@ -1,4 +1,4 @@
.. _ISIS: .. _isis:
**** ****
ISIS ISIS
@ -11,13 +11,13 @@ which is described in :t:`ISO10589`, :rfc:`1195`, :rfc:`5308`. ISIS is an
like :abbr:`OSPF`. ISIS is widely used in large networks such as :abbr:`ISP like :abbr:`OSPF`. ISIS is widely used in large networks such as :abbr:`ISP
(Internet Service Provider)` and carrier backbone networks. (Internet Service Provider)` and carrier backbone networks.
.. _Configuring_isisd: .. _configuring-isisd:
Configuring isisd Configuring isisd
================= =================
There are no *isisd* specific options. Common options can be specified There are no *isisd* specific options. Common options can be specified
(:ref:`Common_Invocation_Options`) to *isisd*. *isisd* needs to acquire (:ref:`common-invocation-options`) to *isisd*. *isisd* needs to acquire
interface information from *zebra* in order to function. Therefore *zebra* must interface information from *zebra* in order to function. Therefore *zebra* must
be running before invoking *isisd*. Also, if *zebra* is restarted then *isisd* be running before invoking *isisd*. Also, if *zebra* is restarted then *isisd*
must be too. must be too.
@ -25,7 +25,7 @@ must be too.
Like other daemons, *isisd* configuration is done in :abbr:`ISIS` specific Like other daemons, *isisd* configuration is done in :abbr:`ISIS` specific
configuration file :file:`isisd.conf`. configuration file :file:`isisd.conf`.
.. _ISIS_router: .. _isis-router:
ISIS router ISIS router
=========== ===========
@ -39,12 +39,12 @@ writing, *isisd* does not support multiple ISIS processes.
.. index:: no router isis WORD .. index:: no router isis WORD
.. clicmd:: no router isis WORD .. clicmd:: no router isis WORD
.. _router_isis_WORD: .. _router-isis-word:
Enable or disable the ISIS process by specifying the ISIS domain with Enable or disable the ISIS process by specifying the ISIS domain with
'WORD'. *isisd* does not yet support multiple ISIS processes but you must 'WORD'. *isisd* does not yet support multiple ISIS processes but you must
specify the name of ISIS process. The ISIS process name 'WORD' is then used specify the name of ISIS process. The ISIS process name 'WORD' is then used
for interface (see command :ref:`ip_router_isis_WORD`). for interface (see command :ref:`ip-router-isis-word`).
.. index:: net XX.XXXX. ... .XXX.XX .. index:: net XX.XXXX. ... .XXX.XX
.. clicmd:: net XX.XXXX. ... .XXX.XX .. clicmd:: net XX.XXXX. ... .XXX.XX
@ -110,7 +110,7 @@ writing, *isisd* does not support multiple ISIS processes.
Set overload bit to avoid any transit traffic. Set overload bit to avoid any transit traffic.
.. _ISIS_Timer: .. _isis-timer:
ISIS Timer ISIS Timer
========== ==========
@ -168,7 +168,7 @@ ISIS Timer
Set minimum interval between consecutive SPF calculations in seconds. Set minimum interval between consecutive SPF calculations in seconds.
.. _ISIS_region: .. _isis-region:
ISIS region ISIS region
=========== ===========
@ -188,7 +188,7 @@ ISIS region
- level-2-only - level-2-only
Act as an area router only Act as an area router only
.. _ISIS_interface: .. _isis-interface:
ISIS interface ISIS interface
============== ==============
@ -199,11 +199,11 @@ ISIS interface
.. index:: no ip router isis WORD .. index:: no ip router isis WORD
.. clicmd:: no ip router isis WORD .. clicmd:: no ip router isis WORD
.. _ip_router_isis_WORD: .. _ip-router-isis-word:
Activate ISIS adjacency on this interface. Note that the name Activate ISIS adjacency on this interface. Note that the name
of ISIS instance must be the same as the one used to configure the ISIS process of ISIS instance must be the same as the one used to configure the ISIS process
(see command :ref:`router_isis_WORD`). (see command :ref:`router-isis-word`).
.. index:: isis circuit-type [level-1 | level-1-2 | level-2] .. index:: isis circuit-type [level-1 | level-1-2 | level-2]
.. clicmd:: isis circuit-type [level-1 | level-1-2 | level-2] .. clicmd:: isis circuit-type [level-1 | level-1-2 | level-2]
@ -341,7 +341,7 @@ ISIS interface
Set PSNP interval in seconds globally, for an area (level-1) or a domain Set PSNP interval in seconds globally, for an area (level-1) or a domain
(level-2). (level-2).
.. _Showing_ISIS_information: .. _showing-isis-information:
Showing ISIS information Showing ISIS information
======================== ========================
@ -446,7 +446,7 @@ Traffic Engineering
:ref:`ospf-traffic-engineering` :ref:`ospf-traffic-engineering`
.. _Debugging_ISIS: .. _debugging-isis:
Debugging ISIS Debugging ISIS
============== ==============

2
doc/user/kernel.rst
View File

@ -1,4 +1,4 @@
.. _Kernel_Interface: .. _kernel-interface:
**************** ****************
Kernel Interface Kernel Interface

12
doc/user/nhrpd.rst
View File

@ -1,4 +1,4 @@
.. _NHRP: .. _nhrp:
**** ****
NHRP NHRP
@ -16,7 +16,7 @@ directly communicate without requiring traffic to use an intermediate hop.
Cisco Dynamic Multipoint VPN (DMVPN) is based on NHRP, and |PACKAGE_NAME| nhrpd Cisco Dynamic Multipoint VPN (DMVPN) is based on NHRP, and |PACKAGE_NAME| nhrpd
implements this scenario. implements this scenario.
.. _Routing_Design: .. _routing-design:
Routing Design Routing Design
============== ==============
@ -61,14 +61,14 @@ command defines the GRE subnet):::
exit-address-family exit-address-family
.. _Configuring_NHRP: .. _configuring-nhrp:
Configuring NHRP Configuring NHRP
================ ================
FIXME FIXME
.. _Hub_Functionality: .. _hub-functionality:
Hub Functionality Hub Functionality
================= =================
@ -105,7 +105,7 @@ per-interface directive:::
interface gre1 interface gre1
ip nhrp redirect ip nhrp redirect
.. _Integration_with_IKE: .. _integration-with-ike:
Integration with IKE Integration with IKE
==================== ====================
@ -122,7 +122,7 @@ and
`http://git.alpinelinux.org/cgit/user/tteras/strongswan/log/?h=tteras,working tree <http://git.alpinelinux.org/cgit/user/tteras/strongswan/log/?h=tteras,working tree>`_ `http://git.alpinelinux.org/cgit/user/tteras/strongswan/log/?h=tteras,working tree <http://git.alpinelinux.org/cgit/user/tteras/strongswan/log/?h=tteras,working tree>`_
git repositories for the patches. git repositories for the patches.
.. _NHRP_Events: .. _nhrp-events:
NHRP Events NHRP Events
=========== ===========

10
doc/user/ospf6d.rst
View File

@ -7,7 +7,7 @@ OSPFv3
*ospf6d* is a daemon support OSPF version 3 for IPv6 network. OSPF for IPv6 is *ospf6d* is a daemon support OSPF version 3 for IPv6 network. OSPF for IPv6 is
described in :rfc:`2740`. described in :rfc:`2740`.
.. _OSPF6_router: .. _OSPF6-router:
OSPF6 router OSPF6 router
============ ============
@ -78,14 +78,14 @@ OSPF6 router
This configuration setting MUST be consistent across all routers This configuration setting MUST be consistent across all routers
within the OSPF domain. within the OSPF domain.
.. _OSPF6_area: .. _OSPF6-area:
OSPF6 area OSPF6 area
========== ==========
Area support for OSPFv3 is not yet implemented. Area support for OSPFv3 is not yet implemented.
.. _OSPF6_interface: .. _OSPF6-interface:
OSPF6 interface OSPF6 interface
=============== ===============
@ -126,7 +126,7 @@ OSPF6 interface
Set explicitly network type for specifed interface. Set explicitly network type for specifed interface.
.. _Redistribute_routes_to_OSPF6: .. _Redistribute-routes-to-OSPF6:
Redistribute routes to OSPF6 Redistribute routes to OSPF6
============================ ============================
@ -141,7 +141,7 @@ Redistribute routes to OSPF6
.. clicmd:: redistribute ripng .. clicmd:: redistribute ripng
.. _Showing_OSPF6_information: .. _Showing-OSPF6-information:
Showing OSPF6 information Showing OSPF6 information
========================= =========================

16
doc/user/ospf_fundamentals.rst
View File

@ -1,4 +1,4 @@
.. _OSPF_Fundamentals: .. _ospf-fundamentals:
OSPF Fundamentals OSPF Fundamentals
================= =================
@ -121,7 +121,7 @@ OSPF defines several related mechanisms, used to manage synchronisation of
:abbr:`LSDB` s between neighbours as neighbours form adjacencies and the :abbr:`LSDB` s between neighbours as neighbours form adjacencies and the
propogation, or :term:`flooding` of new or updated :abbr:`LSA` s. propogation, or :term:`flooding` of new or updated :abbr:`LSA` s.
:ref:`OSPF_Flooding`. :ref:`ospf-flooding`.
.. index:: OSPF Areas overview .. index:: OSPF Areas overview
@ -174,7 +174,7 @@ All LSAs share a common header with the following information:
- Advertising Router - Advertising Router
The Router ID of the router originating the LSA, see :ref:`ospf_router-id`. The Router ID of the router originating the LSA, see :ref:`ospf-router-id`.
- LSA ID - LSA ID
@ -186,7 +186,7 @@ All LSAs share a common header with the following information:
The combination of the Type, ID and Advertising Router ID must uniquely The combination of the Type, ID and Advertising Router ID must uniquely
identify the :abbr:`LSA`. There can however be multiple instances of identify the :abbr:`LSA`. There can however be multiple instances of
an LSA with the same Type, LSA ID and Advertising Router ID, see an LSA with the same Type, LSA ID and Advertising Router ID, see
:ref:`OSPF_LSA_sequence_number,,LSA_Sequence_Number`. :ref:`ospf-lsa-sequence-number,,lsa-sequence-number`.
- Age - Age
@ -206,7 +206,7 @@ All LSAs share a common header with the following information:
a router has shutdown without flushing its LSA(s), e.g. where it has a router has shutdown without flushing its LSA(s), e.g. where it has
become disconnected from the network. Such LSAs do little harm. become disconnected from the network. Such LSAs do little harm.
.. _OSPF_LSA_sequence_number: .. _ospf-lsa-sequence-number:
- Sequence Number - Sequence Number
@ -232,7 +232,7 @@ called :term:`intra-area routes`.
Cost Cost
The output cost of that interface, scaled inversely to some commonly known The output cost of that interface, scaled inversely to some commonly known
reference value, :ref:`OSPF_auto-cost_reference-bandwidth,,auto-cost_reference-bandwidth`. reference value, :ref:`ospf-auto-cost-reference-bandwidth,,auto-cost-reference-bandwidth`.
Link Type Link Type
Transit Network Transit Network
@ -272,7 +272,7 @@ called :term:`intra-area routes`.
Stub links may also be used as a way to describe links on which OSPF is Stub links may also be used as a way to describe links on which OSPF is
*not* spoken, known as :term:`passive interfaces`, see *not* spoken, known as :term:`passive interfaces`, see
:ref:`OSPF_passive-interface,,passive-interface`. :ref:`ospf-passive-interface,,passive-interface`.
- Network LSA - Network LSA
@ -451,7 +451,7 @@ An :abbr:`OSPF` router which originates External :abbr:`LSA` s is known as an
most other :abbr:`LSA` s, which are flooded only within the area in most other :abbr:`LSA` s, which are flooded only within the area in
which they originate, External :abbr:`LSA` s are flooded through-out which they originate, External :abbr:`LSA` s are flooded through-out
the :abbr:`OSPF` network to all areas capable of carrying External the :abbr:`OSPF` network to all areas capable of carrying External
:abbr:`LSA` s (:ref:`OSPF_Areas`). :abbr:`LSA` s (:ref:`ospf-areas`).
Routes internal to OSPF (intra-area or inter-area) are always preferred Routes internal to OSPF (intra-area or inter-area) are always preferred
over external routes. over external routes.

74
doc/user/ospfd.rst
View File

@ -19,7 +19,7 @@ Configuring ospfd
================= =================
There are no *ospfd* specific options. Common options can be specified There are no *ospfd* specific options. Common options can be specified
(:ref:`Common_Invocation_Options`) to *ospfd*. *ospfd* needs to acquire (:ref:`common-invocation-options`) to *ospfd*. *ospfd* needs to acquire
interface information from *zebra* in order to function. Therefore *zebra* must interface information from *zebra* in order to function. Therefore *zebra* must
be running before invoking *ospfd*. Also, if *zebra* is restarted then *ospfd* be running before invoking *ospfd*. Also, if *zebra* is restarted then *ospfd*
must be too. must be too.
@ -27,7 +27,7 @@ must be too.
Like other daemons, *ospfd* configuration is done in :abbr:`OSPF` specific Like other daemons, *ospfd* configuration is done in :abbr:`OSPF` specific
configuration file :file:`ospfd.conf`. configuration file :file:`ospfd.conf`.
.. _OSPF_router: .. _ospf-router:
OSPF router OSPF router
=========== ===========
@ -51,7 +51,7 @@ writing, *ospfd* does not support multiple OSPF processes.
.. index:: no ospf router-id .. index:: no ospf router-id
.. clicmd:: no ospf router-id .. clicmd:: no ospf router-id
.. _ospf_router-id: .. _ospf-router-id:
This sets the router-ID of the OSPF process. The This sets the router-ID of the OSPF process. The
router-ID may be an IP address of the router, but need not be - it can router-ID may be an IP address of the router, but need not be - it can
@ -84,7 +84,7 @@ writing, *ospfd* does not support multiple OSPF processes.
Note that areas with fully-adjacent virtual-links are considered to be Note that areas with fully-adjacent virtual-links are considered to be
"transit capable" and can always be used to route backbone traffic, and "transit capable" and can always be used to route backbone traffic, and
hence are unaffected by this setting (:ref:`OSPF_virtual-link`). hence are unaffected by this setting (:ref:`ospf-virtual-link`).
More information regarding the behaviour controlled by this command can More information regarding the behaviour controlled by this command can
be found in :rfc:`3509`, and :t:`draft-ietf-ospf-shortcut-abr-02.txt`. be found in :rfc:`3509`, and :t:`draft-ietf-ospf-shortcut-abr-02.txt`.
@ -129,7 +129,7 @@ writing, *ospfd* does not support multiple OSPF processes.
.. index:: no passive-interface INTERFACE .. index:: no passive-interface INTERFACE
.. clicmd:: no passive-interface INTERFACE .. clicmd:: no passive-interface INTERFACE
.. _ospf_passive-interface: .. _ospf-passive-interface:
Do not speak OSPF interface on the Do not speak OSPF interface on the
given interface, but do advertise the interface as a stub link in the given interface, but do advertise the interface as a stub link in the
@ -137,7 +137,7 @@ writing, *ospfd* does not support multiple OSPF processes.
allows one to advertise addresses on such connected interfaces without allows one to advertise addresses on such connected interfaces without
having to originate AS-External/Type-5 LSAs (which have global flooding having to originate AS-External/Type-5 LSAs (which have global flooding
scope) - as would occur if connected addresses were redistributed into scope) - as would occur if connected addresses were redistributed into
OSPF (:ref:`Redistribute_routes_to_OSPF`). This is the only way to OSPF (:ref:`redistribute-routes-to-ospf`). This is the only way to
advertise non-OSPF links into stub areas. advertise non-OSPF links into stub areas.
.. index:: timers throttle spf DELAY INITIAL-HOLDTIME MAX-HOLDTIME .. index:: timers throttle spf DELAY INITIAL-HOLDTIME MAX-HOLDTIME
@ -164,7 +164,7 @@ writing, *ospfd* does not support multiple OSPF processes.
by the `maximum-holdtime` configured with this command. If the adaptive by the `maximum-holdtime` configured with this command. If the adaptive
hold-time elapses without any SPF-triggering event occuring then hold-time elapses without any SPF-triggering event occuring then
the current holdtime is reset to the `initial-holdtime`. The current the current holdtime is reset to the `initial-holdtime`. The current
holdtime can be viewed with :ref:`show_ip_ospf`, where it is expressed as holdtime can be viewed with :ref:`show-ip-ospf`, where it is expressed as
a multiplier of the `initial-holdtime`. a multiplier of the `initial-holdtime`.
:: ::
@ -218,7 +218,7 @@ writing, *ospfd* does not support multiple OSPF processes.
Configured state of this feature as well as current status, such as the Configured state of this feature as well as current status, such as the
number of second remaining till on-startup or on-shutdown ends, can be number of second remaining till on-startup or on-shutdown ends, can be
viewed with the :ref:`show_ip_ospf` command. viewed with the :ref:`show-ip-ospf` command.
.. index:: auto-cost reference-bandwidth (1-4294967) .. index:: auto-cost reference-bandwidth (1-4294967)
.. clicmd:: auto-cost reference-bandwidth (1-4294967) .. clicmd:: auto-cost reference-bandwidth (1-4294967)
@ -226,7 +226,7 @@ writing, *ospfd* does not support multiple OSPF processes.
.. index:: no auto-cost reference-bandwidth .. index:: no auto-cost reference-bandwidth
.. clicmd:: no auto-cost reference-bandwidth .. clicmd:: no auto-cost reference-bandwidth
.. _OSPF_auto-cost_reference-bandwidth: .. _OSPF-auto-cost-reference-bandwidth:
This sets the reference This sets the reference
bandwidth for cost calculations, where this bandwidth is considered bandwidth for cost calculations, where this bandwidth is considered
@ -250,7 +250,7 @@ writing, *ospfd* does not support multiple OSPF processes.
.. index:: no network A.B.C.D/M area (0-4294967295) .. index:: no network A.B.C.D/M area (0-4294967295)
.. clicmd:: no network A.B.C.D/M area (0-4294967295) .. clicmd:: no network A.B.C.D/M area (0-4294967295)
.. _OSPF_network_command: .. _ospf-network-command:
This command specifies the OSPF enabled interface(s). If the interface has This command specifies the OSPF enabled interface(s). If the interface has
an address from range 192.168.1.0/24 then the command below enables ospf an address from range 192.168.1.0/24 then the command below enables ospf
@ -276,10 +276,10 @@ writing, *ospfd* does not support multiple OSPF processes.
contains the local address prefix of the interface. contains the local address prefix of the interface.
In some cases it may be more convenient to enable OSPF on a per In some cases it may be more convenient to enable OSPF on a per
interface/subnet basis (:ref:`OSPF_ip_ospf_area_command`). interface/subnet basis (:ref:`ospf-ip-ospf-area-command`).
.. _OSPF_area: .. _ospf-area:
OSPF area OSPF area
========= =========
@ -357,7 +357,7 @@ OSPF area
.. index:: no area (0-4294967295) virtual-link A.B.C.D .. index:: no area (0-4294967295) virtual-link A.B.C.D
.. clicmd:: no area (0-4294967295) virtual-link A.B.C.D .. clicmd:: no area (0-4294967295) virtual-link A.B.C.D
.. _OSPF_virtual-link: .. _OSPF-virtual-link:
.. index:: area A.B.C.D shortcut .. index:: area A.B.C.D shortcut
.. clicmd:: area A.B.C.D shortcut .. clicmd:: area A.B.C.D shortcut
@ -513,17 +513,17 @@ OSPF area
.. index:: area (0-4294967295) authentication message-digest .. index:: area (0-4294967295) authentication message-digest
.. clicmd:: area (0-4294967295) authentication message-digest .. clicmd:: area (0-4294967295) authentication message-digest
.. _area_authentication_message-digest: .. _area-authentication-message-digest:
Specify that OSPF packets Specify that OSPF packets
must be authenticated with MD5 HMACs within the given area. Keying must be authenticated with MD5 HMACs within the given area. Keying
material must also be configured on a per-interface basis (:ref:`ip_ospf_message-digest-key`). material must also be configured on a per-interface basis (:ref:`ip-ospf-message-digest-key`).
MD5 authentication may also be configured on a per-interface basis MD5 authentication may also be configured on a per-interface basis
(:ref:`ip_ospf_authentication_message-digest`). Such per-interface (:ref:`ip-ospf-authentication-message-digest`). Such per-interface
settings will override any per-area authentication setting. settings will override any per-area authentication setting.
.. _OSPF_interface: .. _ospf-interface:
OSPF interface OSPF interface
============== ==============
@ -534,11 +534,11 @@ OSPF interface
.. index:: no ip ospf area [ADDR] .. index:: no ip ospf area [ADDR]
.. clicmd:: no ip ospf area [ADDR] .. clicmd:: no ip ospf area [ADDR]
.. _OSPF_ip_ospf_area_command: .. _ospf-ip-ospf-area-command:
Enable OSPF on the interface, optionally restricted to just the IP address Enable OSPF on the interface, optionally restricted to just the IP address
given by `ADDR`, putting it in the `AREA` area. Per interface area given by `ADDR`, putting it in the `AREA` area. Per interface area
settings take precedence to network commands (:ref:`OSPF_network_command`). settings take precedence to network commands (:ref:`ospf-network-command`).
If you have a lot of interfaces, and/or a lot of subnets, then enabling OSPF If you have a lot of interfaces, and/or a lot of subnets, then enabling OSPF
via this command may result in a slight performance improvement. via this command may result in a slight performance improvement.
@ -553,17 +553,17 @@ OSPF interface
all OSPF packets are authenticated. `AUTH_KEY` has length up to 8 chars. all OSPF packets are authenticated. `AUTH_KEY` has length up to 8 chars.
Simple text password authentication is insecure and deprecated in favour of Simple text password authentication is insecure and deprecated in favour of
MD5 HMAC authentication (:ref:`ip_ospf_authentication_message-digest`). MD5 HMAC authentication (:ref:`ip-ospf-authentication-message-digest`).
.. index:: ip ospf authentication message-digest .. index:: ip ospf authentication message-digest
.. clicmd:: ip ospf authentication message-digest .. clicmd:: ip ospf authentication message-digest
.. _ip_ospf_authentication_message-digest: .. _ip-ospf-authentication-message-digest:
Specify that MD5 HMAC Specify that MD5 HMAC
authentication must be used on this interface. MD5 keying material must authentication must be used on this interface. MD5 keying material must
also be configured (:ref:`ip_ospf_message-digest-key`). Overrides any also be configured (:ref:`ip-ospf-message-digest-key`). Overrides any
authentication enabled on a per-area basis (:ref:`area_authentication_message-digest`). authentication enabled on a per-area basis (:ref:`area-authentication-message-digest`).
Note that OSPF MD5 authentication requires that time never go backwards Note that OSPF MD5 authentication requires that time never go backwards
(correct time is NOT important, only that it never goes backwards), even (correct time is NOT important, only that it never goes backwards), even
@ -580,7 +580,7 @@ OSPF interface
.. index:: no ip ospf message-digest-key .. index:: no ip ospf message-digest-key
.. clicmd:: no ip ospf message-digest-key .. clicmd:: no ip ospf message-digest-key
.. _ip_ospf_message-digest-key: .. _ip-ospf-message-digest-key:
Set OSPF authentication key to a Set OSPF authentication key to a
cryptographic password. The cryptographic algorithm is MD5. cryptographic password. The cryptographic algorithm is MD5.
@ -610,7 +610,7 @@ OSPF interface
.. index:: no ip ospf dead-interval .. index:: no ip ospf dead-interval
.. clicmd:: no ip ospf dead-interval .. clicmd:: no ip ospf dead-interval
.. _ip_ospf_dead-interval_minimal: .. _ip-ospf-dead-interval-minimal:
Set number of seconds for Set number of seconds for
RouterDeadInterval timer value used for Wait Timer and Inactivity RouterDeadInterval timer value used for Wait Timer and Inactivity
@ -637,7 +637,7 @@ OSPF interface
This value must be the same for all routers attached to a common network. This value must be the same for all routers attached to a common network.
The default value is 10 seconds. The default value is 10 seconds.
This command has no effect if :ref:`ip_ospf_dead-interval_minimal` is also This command has no effect if :ref:`ip-ospf-dead-interval-minimal` is also
specified for the interface. specified for the interface.
.. index:: ip ospf network (broadcast|non-broadcast|point-to-multipoint|point-to-point) .. index:: ip ospf network (broadcast|non-broadcast|point-to-multipoint|point-to-point)
@ -687,7 +687,7 @@ OSPF interface
Enable ospf on an interface and set associated area. Enable ospf on an interface and set associated area.
.. _Redistribute_routes_to_OSPF: .. _redistribute-routes-to-ospf:
Redistribute routes to OSPF Redistribute routes to OSPF
=========================== ===========================
@ -719,13 +719,13 @@ Redistribute routes to OSPF
.. index:: no redistribute (kernel|connected|static|rip|bgp) .. index:: no redistribute (kernel|connected|static|rip|bgp)
.. clicmd:: no redistribute (kernel|connected|static|rip|bgp) .. clicmd:: no redistribute (kernel|connected|static|rip|bgp)
.. _OSPF_redistribute: .. _ospf-redistribute:
Redistribute routes of the specified protocol Redistribute routes of the specified protocol
or kind into OSPF, with the metric type and metric set if specified, or kind into OSPF, with the metric type and metric set if specified,
filtering the routes using the given route-map if specified. filtering the routes using the given route-map if specified.
Redistributed routes may also be filtered with distribute-lists, see Redistributed routes may also be filtered with distribute-lists, see
:ref:`ospf_distribute-list`. :ref:`ospf-distribute-list`.
Redistributed routes are distributed as into OSPF as Type-5 External Redistributed routes are distributed as into OSPF as Type-5 External
LSAs into links to areas that accept external routes, Type-7 External LSAs LSAs into links to areas that accept external routes, Type-7 External LSAs
@ -733,7 +733,7 @@ Redistribute routes to OSPF
external routes are not permitted. external routes are not permitted.
Note that for connected routes, one may instead use Note that for connected routes, one may instead use
:term:`passive-interface`, see :ref:`OSPF_passive-interface`. :term:`passive-interface`, see :ref:`ospf-passive-interface`.
.. index:: default-information originate .. index:: default-information originate
.. clicmd:: default-information originate .. clicmd:: default-information originate
@ -773,11 +773,11 @@ Redistribute routes to OSPF
.. index:: no distribute-list NAME out (kernel|connected|static|rip|ospf .. index:: no distribute-list NAME out (kernel|connected|static|rip|ospf
.. clicmd:: no distribute-list NAME out (kernel|connected|static|rip|ospf .. clicmd:: no distribute-list NAME out (kernel|connected|static|rip|ospf
.. _ospf_distribute-list: .. _ospf-distribute-list:
Apply the access-list filter, NAME, to Apply the access-list filter, NAME, to
redistributed routes of the given type before allowing the routes to redistributed routes of the given type before allowing the routes to
redistributed into OSPF (:ref:`OSPF_redistribute`). redistributed into OSPF (:ref:`ospf-redistribute`).
.. index:: default-metric (0-16777214) .. index:: default-metric (0-16777214)
.. clicmd:: default-metric (0-16777214) .. clicmd:: default-metric (0-16777214)
@ -804,12 +804,12 @@ Redistribute routes to OSPF
.. clicmd:: no router zebra .. clicmd:: no router zebra
.. _Showing_OSPF_information: .. _showing-ospf-information:
Showing OSPF information Showing OSPF information
======================== ========================
.. _show_ip_ospf: .. _show-ip-ospf:
.. index:: show ip ospf .. index:: show ip ospf
.. clicmd:: show ip ospf .. clicmd:: show ip ospf
@ -867,7 +867,7 @@ Showing OSPF information
Show the OSPF routing table, as determined by the most recent SPF calculation. Show the OSPF routing table, as determined by the most recent SPF calculation.
.. _Opaque_LSA: .. _opaque-lsa:
Opaque LSA Opaque LSA
========== ==========
@ -952,7 +952,7 @@ Traffic Engineering
Show Traffic Engineering router parameters. Show Traffic Engineering router parameters.
.. _Router_Information: .. _router-information:
Router Information Router Information
================== ==================
@ -1013,7 +1013,7 @@ Router Information
Show Router Capabilities PCE parameters. Show Router Capabilities PCE parameters.
.. _Debugging_OSPF: .. _debugging-ospf:
Debugging OSPF Debugging OSPF
============== ==============

10
doc/user/overview.rst
View File

@ -1,4 +1,4 @@
.. _Overview: .. _overview:
******** ********
Overview Overview
@ -10,7 +10,7 @@ OSPFv2, OSPFv3, IS-IS, BGP-4, and BGP-4+ (:ref:`supported-rfcs`). FRR also
supports special BGP Route Reflector and Route Server behavior. In addition to supports special BGP Route Reflector and Route Server behavior. In addition to
traditional IPv4 routing protocols, FRR also supports IPv6 routing protocols. traditional IPv4 routing protocols, FRR also supports IPv6 routing protocols.
With SNMP daemon which supports SMUX and AgentX protocol, FRR provides routing With SNMP daemon which supports SMUX and AgentX protocol, FRR provides routing
protocol MIBs (:ref:`SNMP_Support`). protocol MIBs (:ref:`snmp-support`).
FRR uses an advanced software architecture to provide you with a high FRR uses an advanced software architecture to provide you with a high
quality, multi server routing engine. FRR has an interactive user quality, multi server routing engine. FRR has an interactive user
@ -296,7 +296,7 @@ When you send a bug report, please be careful about the points below.
Bug reports help us improve FRR and are very much appreciated. Bug reports help us improve FRR and are very much appreciated.
.. _FRR: |PACKAGE_URL| .. _frr: |PACKAGE-URL|
.. _GitHub: https://github.com/frrouting/frr/ .. _github: https://github.com/frrouting/frr/
.. _GitHub issues: https://github.com/frrouting/frr/issues .. _GitHub issues: https://github.com/frrouting/frr/issues
.. _Slack: https://frrouting.slack.com/ .. _slack: https://frrouting.slack.com/

12
doc/user/pim.rst
View File

@ -1,4 +1,4 @@
.. _PIM: .. _pim:
*** ***
PIM PIM
@ -10,7 +10,7 @@ PIM -- Protocol Independent Multicast
vrf aware and can work within the context of vrf's in order to vrf aware and can work within the context of vrf's in order to
do S,G mrouting. do S,G mrouting.
.. _Starting_and_Stopping_pimd: .. _starting-and-stopping-pimd:
Starting and Stopping pimd Starting and Stopping pimd
========================== ==========================
@ -46,7 +46,7 @@ Certain signals have special meanings to *pimd*.
+---------+---------------------------------------------------------------------+ +---------+---------------------------------------------------------------------+
*pimd* invocation options. Common options that can be specified *pimd* invocation options. Common options that can be specified
(:ref:`Common_Invocation_Options`). (:ref:`common-invocation-options`).
.. index:: ip pim rp A.B.C.D A.B.C.D/M .. index:: ip pim rp A.B.C.D A.B.C.D/M
.. clicmd:: ip pim rp A.B.C.D A.B.C.D/M .. clicmd:: ip pim rp A.B.C.D A.B.C.D/M
@ -151,7 +151,7 @@ Certain signals have special meanings to *pimd*.
Lookup in the Unicast Rib only. Lookup in the Unicast Rib only.
.. _PIM_Interface_Configuration: .. _pim-interface-configuration:
PIM Interface Configuration PIM Interface Configuration
=========================== ===========================
@ -212,7 +212,7 @@ is in a vrf, enter the interface command with the vrf keyword at the end.
or IGMP report is received on this interface and the Group is denyed by the or IGMP report is received on this interface and the Group is denyed by the
prefix-list, PIM will ignore the join or report. prefix-list, PIM will ignore the join or report.
.. _PIM_Multicast_RIB_insertion: .. _pim-multicast-rib-insertion:
PIM Multicast RIB insertion:: PIM Multicast RIB insertion::
============================= =============================
@ -236,7 +236,7 @@ caution. Most of the time this will not be necessary.
Insert into the Multicast Rib Route A.B.C.D/M using the specified INTERFACE. Insert into the Multicast Rib Route A.B.C.D/M using the specified INTERFACE.
The distance can be specified as well if desired. The distance can be specified as well if desired.
.. _Show_PIM_Information: .. _show-pim-information:
Show PIM Information Show PIM Information
==================== ====================

2
doc/user/protocol.rst
View File

@ -1,4 +1,4 @@
.. _Zebra_Protocol .. _Zebra-Protocol
************** **************
Zebra Protocol Zebra Protocol

38
doc/user/ripd.rst
View File

@ -1,4 +1,4 @@
.. _RIP: .. _rip:
*** ***
RIP RIP
@ -16,7 +16,7 @@ router.
*ripd* supports RIP version 2 as described in RFC2453 and RIP *ripd* supports RIP version 2 as described in RFC2453 and RIP
version 1 as described in RFC1058. version 1 as described in RFC1058.
.. _Starting_and_Stopping_ripd: .. _starting-and-stopping-ripd:
Starting and Stopping ripd Starting and Stopping ripd
========================== ==========================
@ -58,14 +58,14 @@ Certain signals have special meaningss to *ripd*.
+-------------+------------------------------------------------------+ +-------------+------------------------------------------------------+
*ripd* invocation options. Common options that can be specified *ripd* invocation options. Common options that can be specified
(:ref:`Common_Invocation_Options`). (:ref:`common-invocation-options`).
.. option:: -r .. option:: -r
.. option:: --retain .. option:: --retain
When the program terminates, retain routes added by *ripd*. When the program terminates, retain routes added by *ripd*.
.. _RIP_netmask: .. _rip-netmask:
RIP netmask RIP netmask
----------- -----------
@ -86,7 +86,7 @@ In a case of similar information with the same prefix and metric, the old
information will be suppressed. Ripd does not currently support equal cost information will be suppressed. Ripd does not currently support equal cost
multipath routing. multipath routing.
.. _RIP_Configuration: .. _rip-configuration:
RIP Configuration RIP Configuration
================= =================
@ -180,7 +180,7 @@ RIP Configuration
you don't perform split-horizon on the interface, please specify `no ip you don't perform split-horizon on the interface, please specify `no ip
split-horizon`. split-horizon`.
.. _RIP_Version_Control: .. _rip-version-control:
RIP Version Control RIP Version Control
=================== ===================
@ -194,7 +194,7 @@ a per-interface basis if needs be for send and receive seperately (see below).
It is important to note that RIPv1 cannot be authenticated. Further, if RIPv1 It is important to note that RIPv1 cannot be authenticated. Further, if RIPv1
is enabled then RIP will reply to REQUEST packets, sending the state of its RIP is enabled then RIP will reply to REQUEST packets, sending the state of its RIP
routing table to any remote routers that ask on demand. For a more detailed routing table to any remote routers that ask on demand. For a more detailed
discussion on the security implications of RIPv1 see :ref:`RIP_Authentication`. discussion on the security implications of RIPv1 see :ref:`rip-authentication`.
.. index:: version VERSION .. index:: version VERSION
.. clicmd:: version VERSION .. clicmd:: version VERSION
@ -203,7 +203,7 @@ discussion on the security implications of RIPv1 see :ref:`RIP_Authentication`.
1. 1.
Disabling RIPv1 by specifying version 2 is STRONGLY encouraged, Disabling RIPv1 by specifying version 2 is STRONGLY encouraged,
:ref:`RIP_Authentication`. This may become the default in a future release. :ref:`rip-authentication`. This may become the default in a future release.
Default: Send Version 2, and accept either version. Default: Send Version 2, and accept either version.
@ -236,7 +236,7 @@ discussion on the security implications of RIPv1 see :ref:`RIP_Authentication`.
Default: Accept packets according to the global setting (both 1 and 2). Default: Accept packets according to the global setting (both 1 and 2).
.. _How_to_Announce_RIP_route: .. _how-to-announce-rip-route:
How to Announce RIP route How to Announce RIP route
========================= =========================
@ -335,7 +335,7 @@ How to Announce RIP route
recommend creating a static route in FRR and redistributing it in RIP using recommend creating a static route in FRR and redistributing it in RIP using
`redistribute static`. `redistribute static`.
.. _Filtering_RIP_Routes: .. _filtering-rip-routes:
Filtering RIP Routes Filtering RIP Routes
==================== ====================
@ -376,7 +376,7 @@ RIP routes can be filtered by a distribute-list.
``in`` or ``out``. If DIRECT is ``in`` the access list is applied to input ``in`` or ``out``. If DIRECT is ``in`` the access list is applied to input
packets. packets.
.. _RIP_Metric_Manipulation: .. _rip-metric-manipulation:
RIP Metric Manipulation RIP Metric Manipulation
======================= =======================
@ -404,7 +404,7 @@ received. Redistributed routes' metric is set to 1.
.. clicmd:: offset-list ACCESS-LIST (in|out) IFNAME .. clicmd:: offset-list ACCESS-LIST (in|out) IFNAME
.. _RIP_distance: .. _rip-distance:
RIP distance RIP distance
============ ============
@ -437,7 +437,7 @@ Distance value is used in zebra daemon. Default RIP distance is 120.
Set default RIP distance to specified value when the route's source IP Set default RIP distance to specified value when the route's source IP
address matches the specified prefix and the specified access-list. address matches the specified prefix and the specified access-list.
.. _RIP_route-map: .. _RIP-route-map:
RIP route-map RIP route-map
============= =============
@ -460,7 +460,7 @@ listed in the route table and before routes will be announced to an interface
(something like output filter). I think it is not so clear, but it is draft and (something like output filter). I think it is not so clear, but it is draft and
it may be changed at future. it may be changed at future.
Route-map statement (:ref:`Route_Map`) is needed to use route-map Route-map statement (:ref:`route-map`) is needed to use route-map
functionality. functionality.
.. index:: match interface WORD .. index:: match interface WORD
@ -512,7 +512,7 @@ functionality.
range is very large for compatibility with other protocols. For RIP, valid range is very large for compatibility with other protocols. For RIP, valid
metric values are from 1 to 16. metric values are from 1 to 16.
.. _RIP_Authentication: .. _rip-authentication:
RIP Authentication RIP Authentication
================== ==================
@ -525,7 +525,7 @@ configured `ripd` will discard routing updates received via RIPv1
packets. packets.
However, unless RIPv1 reception is disabled entirely, However, unless RIPv1 reception is disabled entirely,
:ref:`RIP_Version_Control`, RIPv1 REQUEST packets which are received, :ref:`rip-version-control`, RIPv1 REQUEST packets which are received,
which query the router for routing information, will still be honoured which query the router for routing information, will still be honoured
by `ripd`, and `ripd` WILL reply to such packets. This allows by `ripd`, and `ripd` WILL reply to such packets. This allows
`ripd` to honour such REQUESTs (which sometimes is used by old `ripd` to honour such REQUESTs (which sometimes is used by old
@ -538,7 +538,7 @@ entire RIP routing table) to be queried remotely, potentially by anyone
on the internet, via RIPv1. on the internet, via RIPv1.
To prevent such unauthenticated querying of routes disable RIPv1, To prevent such unauthenticated querying of routes disable RIPv1,
:ref:`RIP_Version_Control`. :ref:`rip-version-control`.
.. index:: ip rip authentication mode md5 .. index:: ip rip authentication mode md5
.. clicmd:: ip rip authentication mode md5 .. clicmd:: ip rip authentication mode md5
@ -586,7 +586,7 @@ To prevent such unauthenticated querying of routes disable RIPv1,
! !
.. _RIP_Timers: .. _rip-timers:
RIP Timers RIP Timers
========== ==========
@ -620,7 +620,7 @@ RIP Timers
The `no timers basic` command will reset the timers to the default settings The `no timers basic` command will reset the timers to the default settings
listed above. listed above.
.. _Show_RIP_Information: .. _show-rip-information:
Show RIP Information Show RIP Information
==================== ====================

10
doc/user/ripngd.rst
View File

@ -1,4 +1,4 @@
.. _RIPng: .. _ripng:
***** *****
RIPng RIPng
@ -7,15 +7,15 @@ RIPng
*ripngd* supports the RIPng protocol as described in :rfc:`2080`. It's an IPv6 *ripngd* supports the RIPng protocol as described in :rfc:`2080`. It's an IPv6
reincarnation of the RIP protocol. reincarnation of the RIP protocol.
.. _Invoking_ripngd: .. _invoking-ripngd:
Invoking ripngd Invoking ripngd
=============== ===============
There are no `ripngd` specific invocation options. Common options can be There are no `ripngd` specific invocation options. Common options can be
specified (:ref:`Common_Invocation_Options`). specified (:ref:`common-invocation-options`).
.. _ripngd_Configuration: .. _ripngd-configuration:
ripngd Configuration ripngd Configuration
==================== ====================
@ -53,7 +53,7 @@ Currently ripngd supports the following commands:
This command is the default and does not appear in the configuration. With This command is the default and does not appear in the configuration. With
this statement, RIPng routes go to the *zebra* daemon. this statement, RIPng routes go to the *zebra* daemon.
.. _ripngd_Terminal_Mode_Commands: .. _ripngd-terminal-mode-commands:
ripngd Terminal Mode Commands ripngd Terminal Mode Commands
============================= =============================

12
doc/user/routemap.rst
View File

@ -1,4 +1,4 @@
.. _Route_Map: .. _route-map:
********** **********
Route Maps Route Maps
@ -84,7 +84,7 @@ deny
cont cont
goto next route-map entry goto next route-map entry
.. _Route_Map_Command: .. _route-map-command:
Route Map Command Route Map Command
================= =================
@ -95,7 +95,7 @@ Route Map Command
Configure the `order`'th entry in `route-map-name` with ``Match Policy`` of Configure the `order`'th entry in `route-map-name` with ``Match Policy`` of
either *permit* or *deny*. either *permit* or *deny*.
.. _Route_Map_Match_Command: .. _route-map-match-command:
Route Map Match Command Route Map Match Command
======================= =======================
@ -180,7 +180,7 @@ Route Map Match Command
interface name specified if the neighbor was specified interface name specified if the neighbor was specified
in this manner. in this manner.
.. _Route_Map_Set_Command: .. _route-map-set-command:
Route Map Set Command Route Map Set Command
===================== =====================
@ -235,7 +235,7 @@ Route Map Set Command
Set the BGP-4+ link local IPv6 nexthop address. Set the BGP-4+ link local IPv6 nexthop address.
.. _Route_Map_Call_Command: .. _route-map-call-command:
Route Map Call Command Route Map Call Command
====================== ======================
@ -246,7 +246,7 @@ Route Map Call Command
Call route-map `name`. If it returns deny, deny the route and Call route-map `name`. If it returns deny, deny the route and
finish processing the route-map. finish processing the route-map.
.. _Route_Map_Exit_Action_Command: .. _route-map-exit-action-command:
Route Map Exit Action Command Route Map Exit Action Command
============================= =============================

12
doc/user/rpki.rst
View File

@ -1,4 +1,4 @@
.. _Prefix_Origin_Validation_Using_RPKI: .. _prefix-origin-validation-using-rpki:
Prefix Origin Validation Using RPKI Prefix Origin Validation Using RPKI
=================================== ===================================
@ -24,7 +24,7 @@ For a more detailed but still easy-to-read background, we suggest:
- [Securing-BGP]_ - [Securing-BGP]_
- [Resource-Certification]_ - [Resource-Certification]_
.. _Features_of_the_Current_Implementation: .. _features-of-the-current-implementation:
Features of the Current Implementation Features of the Current Implementation
-------------------------------------- --------------------------------------
@ -46,7 +46,7 @@ In a nutshell, the current implementation provides the following features
outcome of the Prefix Origin Validation. outcome of the Prefix Origin Validation.
.. _Enabling_RPKI: .. _enabling-rpki:
Enabling RPKI Enabling RPKI
------------- -------------
@ -143,7 +143,7 @@ The following commands are independent of a specific cache server.
:file:`~/.ssh/known_hosts`. :file:`~/.ssh/known_hosts`.
.. _Validating_BGP_Updates: .. _validating-bgp-updates:
Validating BGP Updates Validating BGP Updates
---------------------- ----------------------
@ -180,7 +180,7 @@ Validating BGP Updates
set local-preference 500 set local-preference 500
.. _Debugging: .. _debugging:
Debugging Debugging
--------- ---------
@ -193,7 +193,7 @@ Debugging
Enable or disable debugging output for RPKI. Enable or disable debugging output for RPKI.
.. _Displaying_RPKI: .. _displaying-rpki:
Displaying RPKI Displaying RPKI
--------------- ---------------

10
doc/user/snmp.rst
View File

@ -1,4 +1,4 @@
.. _SNMP_Support: .. _snmp-support:
************ ************
SNMP Support SNMP Support
@ -11,9 +11,9 @@ a SNMP agent using the SMUX protocol (:rfc:`1227`) or the AgentX protocol
(:rfc:`2741`) and make the routing protocol MIBs available through it. (:rfc:`2741`) and make the routing protocol MIBs available through it.
Note that SNMP Support needs to be enabled at compile-time and loaded as module Note that SNMP Support needs to be enabled at compile-time and loaded as module
on daemon startup. Refer to :ref:`Loadable_Module_Support` on the latter. on daemon startup. Refer to :ref:`loadable-module-support` on the latter.
.. _Getting_and_installing_an_SNMP_agent: .. _getting-and-installing-an-snmp-agent:
Getting and installing an SNMP agent Getting and installing an SNMP agent
==================================== ====================================
@ -29,7 +29,7 @@ protocol.
Nowadays, SMUX is a legacy protocol. The AgentX protocol should be preferred Nowadays, SMUX is a legacy protocol. The AgentX protocol should be preferred
for any new deployment. Both protocols have the same coverage. for any new deployment. Both protocols have the same coverage.
.. _AgentX_configuration: .. _agentx-configuration:
AgentX configuration AgentX configuration
==================== ====================
@ -94,7 +94,7 @@ need to configure FRR to use another transport, you can configure it through
agentXSocket tcp:192.168.15.12:705 agentXSocket tcp:192.168.15.12:705
.. _SMUX_configuration: .. _smux-configuration:
SMUX configuration SMUX configuration
================== ==================

2
doc/user/snmptrap.rst
View File

@ -2,7 +2,7 @@ Handling SNMP Traps
=================== ===================
To handle snmp traps make sure your snmp setup of frr works correctly as To handle snmp traps make sure your snmp setup of frr works correctly as
described in the frr documentation in :ref:`SNMP_Support`. described in the frr documentation in :ref:`snmp-support`.
The BGP4 mib will send traps on peer up/down events. These should be visible in The BGP4 mib will send traps on peer up/down events. These should be visible in
your snmp logs with a message similar to: your snmp logs with a message similar to:

58
doc/user/vnc.rst
View File

@ -1,4 +1,4 @@
.. _VNC_and_VNC-GW: .. _VNC-and-VNC-GW:
************** **************
VNC and VNC-GW VNC and VNC-GW
@ -54,12 +54,12 @@ following areas:
(:abbr:`CE` s) operating within a VN. (:abbr:`CE` s) operating within a VN.
.. _General_VNC_Configuration: .. _general-vnc-configuration:
.. General VNC Configuration .. General VNC Configuration
.. ------------------------- .. -------------------------
.. _RFP_Related_Configuration: .. _rfp-related-configuration:
RFP Related Configuration RFP Related Configuration
------------------------- -------------------------
@ -76,14 +76,14 @@ following sample configuration:
This is a simple example configuration parameter included as part of the RFP This is a simple example configuration parameter included as part of the RFP
example code. VALUE must be in the range of 0 to 4294967295. example code. VALUE must be in the range of 0 to 4294967295.
.. _VNC_Defaults_Configuration: .. _vnc-defaults-configuration:
VNC Defaults Configuration VNC Defaults Configuration
-------------------------- --------------------------
The VNC Defaults section allows the user to specify default values for The VNC Defaults section allows the user to specify default values for
configuration parameters for all registered NVEs. configuration parameters for all registered NVEs.
Default values are overridden by :ref:`VNC_NVE_Group_Configuration`. Default values are overridden by :ref:`vnc-nve-group-configuration`.
.. clicmd:: vnc defaults .. clicmd:: vnc defaults
@ -122,7 +122,7 @@ These are the statements that can appear between ``vnc defaults`` and
RT list is empty. RT list is empty.
A complete definition of these parameters is given below A complete definition of these parameters is given below
(:ref:`VNC_NVE_Group_Configuration`). (:ref:`vnc-nve-group-configuration`).
.. index:: rd route-distinguisher .. index:: rd route-distinguisher
.. clicmd:: rd ROUTE-DISTINGUISHER .. clicmd:: rd ROUTE-DISTINGUISHER
@ -139,14 +139,14 @@ These are the statements that can appear between ``vnc defaults`` and
`two-byte-autonomous-system-number=0:four-byte-integer=0`. `two-byte-autonomous-system-number=0:four-byte-integer=0`.
A complete definition of this parameter is given below A complete definition of this parameter is given below
(:ref:`VNC_NVE_Group_Configuration`). (:ref:`vnc-nve-group-configuration`).
.. index:: l2rd NVE-ID-VALUE .. index:: l2rd NVE-ID-VALUE
.. clicmd:: l2rd NVE-ID-VALUE .. clicmd:: l2rd NVE-ID-VALUE
Set the value used to distinguish NVEs connected to the same logical Set the value used to distinguish NVEs connected to the same logical
Ethernet segment (i.e., L2VPN). A complete definition of this parameter is Ethernet segment (i.e., L2VPN). A complete definition of this parameter is
given below (:ref:`VNC_NVE_Group_Configuration`). given below (:ref:`vnc-nve-group-configuration`).
.. index:: response-lifetime LIFETIME|infinite .. index:: response-lifetime LIFETIME|infinite
.. clicmd:: response-lifetime LIFETIME|infinite .. clicmd:: response-lifetime LIFETIME|infinite
@ -155,7 +155,7 @@ These are the statements that can appear between ``vnc defaults`` and
NVEs. NVEs.
A complete definition of this parameter is given below A complete definition of this parameter is given below
(:ref:`VNC_NVE_Group_Configuration`). (:ref:`vnc-nve-group-configuration`).
.. index:: export bgp|zebra route-map MAP-NAME .. index:: export bgp|zebra route-map MAP-NAME
.. clicmd:: export bgp|zebra route-map MAP-NAME .. clicmd:: export bgp|zebra route-map MAP-NAME
@ -174,7 +174,7 @@ These are the statements that can appear between ``vnc defaults`` and
Exit VNC configuration mode. Exit VNC configuration mode.
.. _VNC_NVE_Group_Configuration: .. _vnc-nve-group-configuration:
VNC NVE Group Configuration VNC NVE Group Configuration
--------------------------- ---------------------------
@ -322,7 +322,7 @@ Defaults section.
Specify that the named route-map should be applied to routes being exported Specify that the named route-map should be applied to routes being exported
to bgp or zebra. This paramter is used in conjunction with to bgp or zebra. This paramter is used in conjunction with
:ref:`Configuring_Export_of_Routes_to_Other_Routing_Protocols`. This item :ref:`configuring-export-of-routes-to-other-routing-protocols`. This item
is optional. is optional.
.. index:: export bgp|zebra no route-map .. index:: export bgp|zebra no route-map
@ -330,7 +330,7 @@ Defaults section.
Specify that no route-map should be applied to routes being exported to bgp Specify that no route-map should be applied to routes being exported to bgp
or zebra. This paramter is used in conjunction with or zebra. This paramter is used in conjunction with
:ref:`Configuring_Export_of_Routes_to_Other_Routing_Protocols`. This item :ref:`configuring-export-of-routes-to-other-routing-protocols`. This item
is optional. is optional.
.. index:: export bgp|zebra ipv4|ipv6 prefix-list LIST-NAME .. index:: export bgp|zebra ipv4|ipv6 prefix-list LIST-NAME
@ -339,7 +339,7 @@ Defaults section.
Specify that the named prefix-list filter should be applied to routes being Specify that the named prefix-list filter should be applied to routes being
exported to bgp or zebra. Prefix-lists for ipv4 and ipv6 are independent of exported to bgp or zebra. Prefix-lists for ipv4 and ipv6 are independent of
each other. This paramter is used in conjunction with each other. This paramter is used in conjunction with
:ref:`Configuring_Export_of_Routes_to_Other_Routing_Protocols`. This item :ref:`configuring-export-of-routes-to-other-routing-protocols`. This item
is optional. is optional.
.. index:: export bgp|zebra no ipv4|ipv6 prefix-list .. index:: export bgp|zebra no ipv4|ipv6 prefix-list
@ -347,17 +347,17 @@ Defaults section.
Specify that no prefix-list filter should be applied to routes being Specify that no prefix-list filter should be applied to routes being
exported to bgp or zebra. This parameter is used in conjunction with exported to bgp or zebra. This parameter is used in conjunction with
:ref:`Configuring_Export_of_Routes_to_Other_Routing_Protocols`. This item :ref:`configuring-export-of-routes-to-other-routing-protocols`. This item
is optional. is optional.
.. _VNC_L2_Group_Configuration: .. _VNC-L2-Group-Configuration:
VNC L2 Group Configuration VNC L2 Group Configuration
-------------------------- --------------------------
The route targets advertised with prefixes and addresses registered by an NVE The route targets advertised with prefixes and addresses registered by an NVE
are determined based on the NVE's associated VNC NVE Group Configuration, are determined based on the NVE's associated VNC NVE Group Configuration,
:ref:`VNC_NVE_Group_Configuration`. Layer 2 (L2) Groups are used to override :ref:`vnc-nve-group-configuration`. Layer 2 (L2) Groups are used to override
the route targets for an NVE's Ethernet registrations based on the Logical the route targets for an NVE's Ethernet registrations based on the Logical
Network Identifier and label value. A Logical Network Identifier is used to Network Identifier and label value. A Logical Network Identifier is used to
uniquely identify a logical Ethernet segment and is conceptually similar to the uniquely identify a logical Ethernet segment and is conceptually similar to the
@ -414,9 +414,9 @@ The following statements are valid in a L2 group definition:
Specify the route target import and export value associated with the group. Specify the route target import and export value associated with the group.
A complete definition of these parameters is given above, A complete definition of these parameters is given above,
:ref:`VNC_NVE_Group_Configuration`. :ref:`vnc-nve-group-configuration`.
.. _Configuring_Redistribution_of_Routes_from_Other_Routing_Protocols: .. _configuring-redistribution-of-routes-from-other-routing-protocols:
Configuring Redistribution of Routes from Other Routing Protocols Configuring Redistribution of Routes from Other Routing Protocols
----------------------------------------------------------------- -----------------------------------------------------------------
@ -628,7 +628,7 @@ being redistributed from `bgp-direct`.
When redistributing `bgp-direct` routes, When redistributing `bgp-direct` routes,
specifies that no route-map should be applied. specifies that no route-map should be applied.
.. _Configuring_Export_of_Routes_to_Other_Routing_Protocols: .. _configuring-export-of-routes-to-other-routing-protocols:
Configuring Export of Routes to Other Routing Protocols Configuring Export of Routes to Other Routing Protocols
------------------------------------------------------- -------------------------------------------------------
@ -647,7 +647,7 @@ a corresponding `redistribute vnc-direct` statement.
Specify how routes should be exported to bgp or zebra. If the mode is Specify how routes should be exported to bgp or zebra. If the mode is
`none`, routes are not exported. If the mode is `group-nve`, routes are `none`, routes are not exported. If the mode is `group-nve`, routes are
exported according to nve-group or vrf-policy group configuration exported according to nve-group or vrf-policy group configuration
(:ref:`VNC_NVE_Group_Configuration`): if a group is configured to allow (:ref:`vnc-nve-group-configuration`): if a group is configured to allow
export, then each prefix visible to the group is exported with next hops set export, then each prefix visible to the group is exported with next hops set
to the currently-registered NVEs. If the mode is `registering-nve`, then all to the currently-registered NVEs. If the mode is `registering-nve`, then all
VNC routes are exported with their original next hops. If the mode is `ce`, VNC routes are exported with their original next hops. If the mode is `ce`,
@ -701,7 +701,7 @@ a corresponding `redistribute vnc-direct` statement.
When the export mode is `group-nve`, policy for exported routes is specified When the export mode is `group-nve`, policy for exported routes is specified
per-NVE-group or vrf-policy group inside a `nve-group` `RFG-NAME` block via per-NVE-group or vrf-policy group inside a `nve-group` `RFG-NAME` block via
the following commands(:ref:`VNC_NVE_Group_Configuration`): the following commands(:ref:`vnc-nve-group-configuration`):
.. index:: export bgp|zebra route-map MAP-NAME .. index:: export bgp|zebra route-map MAP-NAME
.. clicmd:: export bgp|zebra route-map MAP-NAME .. clicmd:: export bgp|zebra route-map MAP-NAME
@ -733,7 +733,7 @@ a corresponding `redistribute vnc-direct` statement.
that no prefix-list filter should be applied to routes being exported to that no prefix-list filter should be applied to routes being exported to
bgp or zebra. bgp or zebra.
.. _Manual_Address_Control: .. _manual-address-control:
Manual Address Control Manual Address Control
====================== ======================
@ -792,7 +792,7 @@ manually and dynamically added information.
`*` in lieu of any VN or UN address, in which case all registrations will `*` in lieu of any VN or UN address, in which case all registrations will
match. match.
.. _Other_VNC-Related_Commands: .. _Other-VNC-Related-Commands:
Other VNC-Related Commands Other VNC-Related Commands
========================== ==========================
@ -835,8 +835,8 @@ related information:
.. clicmd:: show vnc queries PREFIX .. clicmd:: show vnc queries PREFIX
Display active Query information. Queries remain valid for the default Display active Query information. Queries remain valid for the default
Response Lifetime (:ref:`VNC_Defaults_Configuration`) or NVE-group Response Response Lifetime (:ref:`vnc-defaults-configuration`) or NVE-group Response
Lifetime (:ref:`VNC_NVE_Group_Configuration`). Specifying `prefix` limits Lifetime (:ref:`vnc-nve-group-configuration`). Specifying `prefix` limits
the output to Query Targets that fall within `prefix`. the output to Query Targets that fall within `prefix`.
Query information is provided for each querying NVE, and includes the Query Query information is provided for each querying NVE, and includes the Query
@ -873,9 +873,9 @@ related information:
Display all, active and/or removed response information which are Display all, active and/or removed response information which are
present in the NVA Responses Cache. Responses remain valid for the present in the NVA Responses Cache. Responses remain valid for the
default Response Lifetime (:ref:`VNC_Defaults_Configuration`) or default Response Lifetime (:ref:`vnc-defaults-configuration`) or
NVE-group Response Lifetime (:ref:`VNC_NVE_Group_Configuration`.) NVE-group Response Lifetime (:ref:`vnc-nve-group-configuration`.)
When Removal Responses are enabled (:ref:`General_VNC_Configuration`), When Removal Responses are enabled (:ref:`general-vnc-configuration`),
such responses are listed for the Response Lifetime. Specifying such responses are listed for the Response Lifetime. Specifying
`prefix` limits the output to the addresses that fall within `prefix` limits the output to the addresses that fall within
`prefix`. `prefix`.
@ -890,7 +890,7 @@ related information:
Print the number of memory items allocated by the NVA. Print the number of memory items allocated by the NVA.
.. _Example_VNC_and_VNC-GW_Configurations: .. _Example-VNC-and-VNC-GW-Configurations:
Example VNC and VNC-GW Configurations Example VNC and VNC-GW Configurations
===================================== =====================================

4
doc/user/vtysh.rst
View File

@ -1,4 +1,4 @@
.. _VTY_shell: .. _vty-shell:
********* *********
VTY shell VTY shell
@ -60,7 +60,7 @@ could be made SGID (set group ID) to the |INSTALL_VTY_GROUP| group.
at all. at all.
.. _Integrated_configuration_mode: .. _integrated-configuration-mode:
Integrated configuration mode Integrated configuration mode
============================= =============================

26
doc/user/zebra.rst
View File

@ -1,4 +1,4 @@
.. _Zebra: .. _zebra:
***** *****
Zebra Zebra
@ -8,12 +8,12 @@ Zebra
table updates, interface lookups, and redistribution of routes between table updates, interface lookups, and redistribution of routes between
different routing protocols. different routing protocols.
.. _Invoking_zebra: .. _invoking-zebra:
Invoking zebra Invoking zebra
============== ==============
Besides the common invocation options (:ref:`Common_Invocation_Options`), the Besides the common invocation options (:ref:`common-invocation-options`), the
*zebra* specific invocation options are listed below. *zebra* specific invocation options are listed below.
.. program:: zebra .. program:: zebra
@ -36,12 +36,12 @@ Besides the common invocation options (:ref:`Common_Invocation_Options`), the
.. program:: configure .. program:: configure
.. _Interface_Commands: .. _interface-commands:
Interface Commands Interface Commands
================== ==================
.. _Standard_Commands: .. _standard-commands:
Standard Commands Standard Commands
----------------- -----------------
@ -136,7 +136,7 @@ Standard Commands
Linux and Solaris, and only where network interface drivers support Linux and Solaris, and only where network interface drivers support
reporting link-state via the ``IFF_RUNNING`` flag. reporting link-state via the ``IFF_RUNNING`` flag.
.. _Link_Parameters_Commands: .. _link-parameters-commands:
Link Parameters Commands Link Parameters Commands
------------------------ ------------------------
@ -150,7 +150,7 @@ Link Parameters Commands
Enter into the link parameters sub node. At least 'enable' must be set to Enter into the link parameters sub node. At least 'enable' must be set to
activate the link parameters, and consequently Traffic Engineering on this activate the link parameters, and consequently Traffic Engineering on this
interface. MPLS-TE must be enable at the OSPF interface. MPLS-TE must be enable at the OSPF
(:ref:`OSPF_Traffic_Engineering`) or ISIS (:ref:`ISIS_Traffic_Engineering`) (:ref:`ospf-traffic-engineering`) or ISIS (:ref:`isis-traffic-engineering`)
router level in complement to this. Disable link parameters for this router level in complement to this. Disable link parameters for this
interface. interface.
@ -225,7 +225,7 @@ Link Parameters Commands
for InterASv2 link in OSPF (RFC5392). Note that this option is not yet for InterASv2 link in OSPF (RFC5392). Note that this option is not yet
supported for ISIS (RFC5316). supported for ISIS (RFC5316).
.. _Static_Route_Commands: .. _static-route-commands:
Static Route Commands Static Route Commands
===================== =====================
@ -351,7 +351,7 @@ default) should the specified gateways not be reachable. Eg:
and later). After setting TABLENO with this command, and later). After setting TABLENO with this command,
static routes defined after this are added to the specified table. static routes defined after this are added to the specified table.
.. _Multicast_RIB_Commands: .. _multicast-rib-commands:
Multicast RIB Commands Multicast RIB Commands
====================== ======================
@ -441,12 +441,12 @@ longer-prefix
``ip route`` command, except that it inserts the route in the Multicast RIB ``ip route`` command, except that it inserts the route in the Multicast RIB
instead of the Unicast RIB. instead of the Unicast RIB.
.. _zebra_Route_Filtering: .. _zebra-route-filtering:
zebra Route Filtering zebra Route Filtering
===================== =====================
Zebra supports :dfn:`prefix-list` s and :ref:`Route_Map` s to match routes Zebra supports :dfn:`prefix-list` s and :ref:`route-map` s to match routes
received from other FRR components. The permit/deny facilities provided by received from other FRR components. The permit/deny facilities provided by
these commands can be used to filter which routes zebra will install in the these commands can be used to filter which routes zebra will install in the
kernel. kernel.
@ -490,7 +490,7 @@ that sets the preferred source address, and applies the route-map to all
ip protocol rip route-map RM1 ip protocol rip route-map RM1
.. _zebra_FIB_push_interface: .. _zebra-fib-push-interface:
zebra FIB push interface zebra FIB push interface
======================== ========================
@ -498,7 +498,7 @@ zebra FIB push interface
Zebra supports a 'FIB push' interface that allows an external Zebra supports a 'FIB push' interface that allows an external
component to learn the forwarding information computed by the FRR component to learn the forwarding information computed by the FRR
routing suite. This is a loadable module that needs to be enabled routing suite. This is a loadable module that needs to be enabled
at startup as described in :ref:`Loadable_Module_Support`. at startup as described in :ref:`loadable-module-support`.
In FRR, the Routing Information Base (RIB) resides inside In FRR, the Routing Information Base (RIB) resides inside
zebra. Routing protocols communicate their best routes to zebra, and zebra. Routing protocols communicate their best routes to zebra, and