mirror_corosync/cts

Quick start guide.
==================

CTS: Cluster Test System
The CTS uses a test driver node(TDN) to drive the execution of the test
software.  The CTS also uses 2 or more test target nodes(TTN) to run the test
cases.  The CTS software requires atleast 3 nodes 1 of which acts as a TDN and
the remaining acting as TTNs.

The dependencies of the TDN include Pacemaker and syslog-ng.
The dependencies of the TTN include syslog-ng.

On the single TDN install syslog-ng.
On the single TDN, it is recommended at this time to install pacemaker from
source so that the CTS from Pacemaker remains compatible with the current
working version of the CTS components within Corosync.

On the 2 or more TTNs install syslog-ng.

2] ssh access
--------------------------------------------------------------------------------
CTS requires login-less root access to the CNs.
so if my CN is called "node32"
# ssh node32
should not ask for a password and result in a root shell.

To enable this behavior, create a ssh key with the command ssh-keygen.  When it
prompts for a password, enter an empty field.  It will create a file called
~/.ssh/id_dsa.pub.  Copy that file to the TTNs into /root/.ssh/authorized_keys.
Ensure permissions are 700 on /root/.ssh.

Test ssh into the machine works without a password from the TDN.

3] Redirect corosync logging from the TTN to the TDN
--------------------------------------------------------------------------------
a) install & enable syslog-ng on the EN and CNs.
b) put the following config into /etc/syslog-ng/syslog-ng.conf

For the below configuration content, substitute the following with your
environment:
Note: obviously change the following to real values:
@THE-LOG-FILE-HERE@ 		A log file name on the TTN
@EXERCISER-HOSTNAME-HERE@	The host name of the TTN.  To avoid DNS issues
				IP addresses also work and are more convient.

Place this anywhere in the configuration file of the TDN:

source s_tcp { tcp(port(9191) max-connections(99999)); };
filter f_ha  { facility(daemon); };
destination ha_local { file(@THE-LOG-FILE-HERE@ perm(0644)); };
log { source(s_sys); source(s_tcp); filter(f_ha); destination(ha_local); };

Place this anywhere in the configuration file on the TTN:

destination ha_tcp { tcp(@EXERCISER-HOSTNAME-HERE@ port(9191));};
filter f_ha_tcp  { facility(daemon); };
log { source(s_sys); filter(f_ha_tcp); destination(ha_tcp); };

c) Test that syslog-ng is working properly by using the logger command
From the TTN:
logger -p daemon.err "Hello from $(hostname)"

Then on the TDN:
tail @THE-LOG-FILE-HERE@

4] Install augeas on the TTN
--------------------------------------------------------------------------------
yum install augeas

5] Configuring corosync for CTSs testing
--------------------------------------------------------------------------------

./configure --enable-testagents --enable-augeas

and then install it on the TTN.

6] run CTS
--------------------------------------------------------------------------------
cd <your-corosync-src-dir>/cts
python ./CoroLab.py -L @THE-LOG-FILE-HERE@ --at-boot 0  --nodes "n1 n2"