sort and reference man pages in typical usage order
update some structures/defines
clean formatting to be consistent
don't ship qdevice API man pages for now
Signed-off-by: Fabio M. Di Nitto <fdinitto@redhat.com>
Reviewed-by: Angus Salkeld <asalkeld@redhat.com>
sort and reference man pages in typical usage order
update some structures/defines
clean formatting to be consistent
Signed-off-by: Fabio M. Di Nitto <fdinitto@redhat.com>
Reviewed-by: Christine Caulfield <ccaulfie@redhat.com>
this is useful to include ipc_common errors into all man pages
Signed-off-by: Fabio M. Di Nitto <fdinitto@redhat.com>
Reviewed-by: Steven Dake <sdake@redhat.com>
Add missing option for dispatch, which fills gap in combination of
block/nonblock and one/all dispatch types. New type doesn't mask
CS_ERR_TRY_AGAIN, and it means "no message was processed".
Signed-off-by: Jan Friesse <jfriesse@redhat.com>
Reviewed-by: Steven Dake <sdake@redhat.com>
the only user of those obsoleted defines is dlm master (already ported)
to use CS_ and cmirror (that needs full porting to new corosync either way).
Signed-off-by: Fabio M. Di Nitto <fdinitto@redhat.com>
Reviewed-by: Steven Dake <sdake@redhat.com>
do some cleanup around to include all files that need to be shipped
and honor conditional builds properly
Signed-off-by: Fabio M. Di Nitto <fdinitto@redhat.com>
Reviewed-by: Angus Salkeld <asalkeld@redhat.com>
this also cleanup NODESTATE for good. JOINING was never used
Signed-off-by: Fabio M. Di Nitto <fdinitto@redhat.com>
Reviewed-by: Christine Caulfield <ccaulfie@redhat.com>
a quorum device is not necessarely a disk and this also aligns
various names to be generic
Signed-off-by: Fabio M. Di Nitto <fdinitto@redhat.com>
Reviewed-By: Christine Caulfield <ccaulfie@redhat.com>
auto_tie_breaker requires to know the lowest node id in the currently
quorate partition and not of the whole cluster.
this allow us to determine the lowest node id as soon as we are quorate
and remove the complexity to read it from WFA or nodelist. Add
the same time it adds the flexibility for dynamic nodeids in a cluster.
drop requirement on WFA if nodelist is not specified
update man page
Signed-off-by: Fabio M. Di Nitto <fdinitto@redhat.com>
Reviewed-by: Christine Caulfield <ccaulfie@redhat.com>
fix a few typos on the way and separate config / library bits
Signed-off-by: Fabio M. Di Nitto <fdinitto@redhat.com>
Reviewed-by: Christine Caulfield <ccaulfie@redhat.com>
Option is used for automatic generating of multicast address. If both
cluster_name and mcastaddr options are specified, mcastaddr takes
precedence.
Signed-off-by: Jan Friesse <jfriesse@redhat.com>
Reviewed-by: Steven Dake <sdake@redhat.com>
add tools/daemon section and developers section
also add links to other API docs
Signed-off-by: Fabio M. Di Nitto <fdinitto@redhat.com>
Reviewed-by: Jan Friesse <jfriesse@redhat.com>
this was a compatibility function for cman_tool only.
Signed-off-by: Fabio M. Di Nitto <fdinitto@redhat.com>
Reviewed-by: Steven Dake <sdake@redhat.com>
this is a very old leftover from the RHEL5 timeframe, not used in RHEL6.
Also change votequorum soname since this change implies an ABI change.
Reviewed-by: Steven Dake <sdake@redhat.com>
Signed-off-by: Fabio M. Di Nitto <fdinitto@redhat.com>
There were too much false positives with passive mode rrp when high
number of messages were received.
Patch adds new configurable variable rrp_problem_count_mcast_threshold
which is by default 10 times rrp_problem_count_threshold and this is
used as threshold for multicast packets in passive mode. Variable is
unused in active mode.
Signed-off-by: Jan Friesse <jfriesse@redhat.com>
Reviewed by: Steven Dake <sdake@redhat.com>
IPC: return 0/-ENOBUFS from message handler
IPC: use the new rate_limit API to improve perf.
CPG: add send_async API & hook up flow control
IPC: Fix flow control getting stuck.
IPC: Port the remaining libs to use libqb IPC
IPC: remove libqb flowcontrol API
TEST: put cpg_dispatch() in it's own thread
IPC: cleanup ipc_glue.c name everything cs_ipcs_*()
IPC: add back statistics
IPC: remove coroipcc_ symbols from lib*.versions
IPC: init each se's IPC as it is loaded.
IPC: use the new connection_closed() event to free the context.
IPC: re-add zero copy functionality back
IPC: remove cpg_mcast_joined_async() and make it the default
-> now cpg_mcast_joined() == cpg_mcast_joined_async()
libqb: expose a libqb error converter
libqb: add missing error conversions
libqb: remove repeat try loop in lib/cpg.c
CPG: fix zero copy mcast
CPG: use newer return codes
Add ENOTCONN to qb_to_cs_error()
libqb: fix error conversion from errno to cs_error_t in confdb
libqb: change errno_to_cs to qb_to_cs_error
libqb: add a cs_strerror() to get a more meaningful message
libqb: fix some confusing error conversions.
libqb: set the timeout on recv's to -1 (wait forever)
Signed-off-by: Angus Salkeld <asalkeld@redhat.com>
Reviewed-by: Steven Dake <sdake@redhat.com>
Previous default (50) was too low for most modern switch hardware. This
may trigger abort because the aru doesn't increase for 50 token
rotations combined with a defect in how failed to recv conditions are
handled. By increasing this tunable, the condition should no longer
trigger the errant code.
Signed-off-by: Jan Friesse <jfriesse@redhat.com>
Reviewed-by: Steven Dake <sdake@redhat.com>
This patch automatically recovers redundant ring failures.
Please note that this patch introduced rrp_autorecovery_check_timeout
in totem config hence breaks internal ABI. The internal ABI users
of totem.h need to rebuild their binaries.
Signed-off-by: Jiaju Zhang <jjzhang@suse.de>
Signed-off-by: Steven Dake <sdake@redhat.com>
Tested-by: Jan Friesse <jfriesse@redhat.com>
Tested-by: Florian Haas <florian.haas@linbit.com>
Tested-by: Jiaju Zhang <jjzhang@suse.de>
1) both IPv4 and IPv6 mcast should default to ttl=1
2) the range should be 0..255
0 is valid meaning localhost only (cluster of one)
Signed-off-by: Angus Salkeld <asalkeld@redhat.com>
Reviewed-by: Fabio M. Di Nitto <fdinitto@redhat.com>
This option (-l or --less-secure) causes corosync-keygen to read from
/dev/urandom instead of /dev/random to ensure that no input is required
from the user. It may be useful when this command is used from a
script.
Signed-off-by: Russell Bryant <russell@russellbryant.net>
Reviewed-by: Steven Dake <sdake@redhat.com>
This is to send dbus events on major cluster events:
- membership changes
- application connect/dissconnet from corosync
- quorum changes
dbus events can then be converted into snmp traps by foghorn or
corosync-notifyd can be run to directly send snmp traps.
Signed-off-by: Angus Salkeld <asalkeld@redhat.com>
Signed-off-by: Lon Hohberger <lhh@redhat.com>
Reviewed-by: Steven Dake <sdake@redhat.com>
Reviewed-by: Russell Bryant <russell@russellbryant.net>
Reviewed-by: Fabio M. Di Nitto <fdinitto@redhat.com>
Some switches delay multicast packets vs the unicast token. This patch works
around that problem by providing a new tuneable called miss_count_const. This
tuneable works by counting the number of times a message is found missing
and once reaching the const value, marks it as missing in the retransmit list.
This improves performance and doesn't display warning messages about missed
multicast messages when operating in these switching environments.
Signed-off-by: Steven Dake <sdake@redhat.com>
Reviewed-by: Angus Salkeld <asalkeld@redhat.com>
This adds a per-interface config option to
adjust the TTL.
Signed-off-by: Angus Salkeld <asalkeld@redhat.com>
Reviewed-by: Steven Dake <sdake@redhat.com>
The UDPU transport is useful for those deployments which can't use multicast.
UDPU works by using UDP unicast, which is fully supported by every switch
manufacturer by default and doesn't rely on a functional IGMP implementation.
An example of the UDPU transport is contained in the corosync.conf.example.udpu
file which shows a 16 node cluster. This file should be copied to each node
in the cluster and IP addresses changed as appropriate.
Amended to remove dead udpu REUSEADDR socket option.
Signed-off-by: Steven Dake <sdake@redhat.com>
- timestamps -> uint64_t and in nanosecs
- use clock_gettime
- common object naming
- common state names
- timeouts in milliseconds
git-svn-id: http://svn.fedorahosted.org/svn/corosync/trunk@3054 fd59a12c-fef9-0310-b244-a6a79926bd2f
Patch add support for Confdb integration with SAM. It's now possible to
use SAM_RECOVERY_POLICY_CONFDB as flag to previous policies.
Also new function sam_mark_failed is added for ability to use RECOVERY
policy together with confdb and get expected results (specially with
integration with corosync watchdog)
Patch also makes SAM thread safe.
git-svn-id: http://svn.fedorahosted.org/svn/corosync/trunk@3050 fd59a12c-fef9-0310-b244-a6a79926bd2f
in corosync.conf to explicitly state that you need to use
the network address, as opposed to "should always end in
zero", which is only correct for class C networks.
Regards,
Tim
--
Tim Serong <tserong@novell.com>
git-svn-id: http://svn.fedorahosted.org/svn/corosync/trunk@2856 fd59a12c-fef9-0310-b244-a6a79926bd2f
Patch adds integration of SAM and quorum, so it's now possible to use
SAM_RECOVERY_POLICY_QUORUM_QUIT or SAM_RECOVERY_POLICY_QUORUM_RESTART
recovery policy. With these policies, sam_start will block until
corosync is quorate. If quorum is lost during health checking, recovery
action is taken.
git-svn-id: http://svn.fedorahosted.org/svn/corosync/trunk@2822 fd59a12c-fef9-0310-b244-a6a79926bd2f
Patch adds new function to initialize cpg, cpg_model_initialize. Model
is set of callbacks. With this function, future addions of models
should be possible without changing the ABI.
Patch also contains callback in CPG_MODEL_V1 for notification about
Totem membership changes.
git-svn-id: http://svn.fedorahosted.org/svn/corosync/trunk@2770 fd59a12c-fef9-0310-b244-a6a79926bd2f
Ability to in-memory storing of user data which survives between
instances of process.
Also ability needed ability for bi-directional communication between
child and parent is added.
git-svn-id: http://svn.fedorahosted.org/svn/corosync/trunk@2769 fd59a12c-fef9-0310-b244-a6a79926bd2f
- allows white characters before #
- new function to parse log destinations (remove code duplicity)
- clarify man page
git-svn-id: http://svn.fedorahosted.org/svn/corosync/trunk@2642 fd59a12c-fef9-0310-b244-a6a79926bd2f
nodes from executing a token timeout in the COMMIT state while another node
executes a consensus timeout, showing to applications as a temporary network
partition.
git-svn-id: http://svn.fedorahosted.org/svn/corosync/trunk@2567 fd59a12c-fef9-0310-b244-a6a79926bd2f
The flight recoder buffer size as specified in LOGSYS_DECLARE_SYSTEM
or _logsys_rec_init was expressed in number of ints. A developer asking
to allocate 512K would get a 2M allocation on a machine with sizeof(int) = 4.
This is confusing and the patch addresses it:
- rename rec_size to fltsize for external API (no type change),
because rec_size is used many times internally for other reasons
and it can be confusing.
- rename size to fltsize in _logsys_rec_init.
- document what we allocate and why.
- swap comments around to match the code.
- introduce a simple macro to perform rounding (stolen from linux-2.6.git).
- start shaping fdata header to better handle dynamic values:
* write the flt_data_size as first unsigned int the header.
* change corosync-fplay to read the value and alloc the right amount
of memory instead of hardcoding it again.
git-svn-id: http://svn.fedorahosted.org/svn/corosync/trunk@2255 fd59a12c-fef9-0310-b244-a6a79926bd2f
the confdb library to use the new find_create/find_next/find_destroy API
calls instead.
I've kept the libcondfb API the same as before with the single change of
adding a confdb_object_find_destroy to tidy up the find handle after
use. If you don't call this then libcondfb will do it for you when
confdb_finalize is called.
git-svn-id: http://svn.fedorahosted.org/svn/corosync/trunk@1660 fd59a12c-fef9-0310-b244-a6a79926bd2f
This call causes a complete list of active groups and their
membership lists to be sent to a callback function.
git-svn-id: http://svn.fedorahosted.org/svn/corosync/trunk@1571 fd59a12c-fef9-0310-b244-a6a79926bd2f
be used to disable a certain logger source.
- when DEBUG compiled it does not use the new printer threads (printouts are not buffered)
- man page update
- openais.conf update
git-svn-id: http://svn.fedorahosted.org/svn/corosync/trunk@1234 fd59a12c-fef9-0310-b244-a6a79926bd2f
SAI-Overview-B.02.01.pdf. Other AMF changes as specified in
SAI-AIS-AMF-B.02.01.
Summary:
- SA Forum B.02 Information model for AMF
- groups.conf renamed to amf.conf
- amf.conf syntax changed heavily to follow SA Forum specs.
- AMF works when daemon.
- linux lists removed from AMF
- component cmd environment variables support
- component argv support
- multi value csi attributes
git-svn-id: http://svn.fedorahosted.org/svn/corosync/trunk@1026 fd59a12c-fef9-0310-b244-a6a79926bd2f
man pages, and rename of one of the environment variables used to specify
the main openais configuration file.
git-svn-id: http://svn.fedorahosted.org/svn/corosync/trunk@1024 fd59a12c-fef9-0310-b244-a6a79926bd2f
- rests of old logging removed from all code (#define LOG_SERVICE...).
- line feed added if not in message.
- new trace() function added so that trace macros adds minimum of code and runtime penalties to user code.
- ENTER_ARGS macro changed to ENTER. ENTER macro now requires arguments.
- openais.conf.5 man page updated with logger directives.
git-svn-id: http://svn.fedorahosted.org/svn/corosync/trunk@1021 fd59a12c-fef9-0310-b244-a6a79926bd2f
Global reorganization of totem code and also many feature enhancments
These include:
need to specify whether authentication is enabled or dislabed in config file
need to specify frame size in config file
need redundant ring placeholder
need to specify version field of totem
need to support large frame sizes
need to break out threading code from totemsrp
need to break out network code from totemsrp
need to break out parser code from parse.c
and some others
git-svn-id: http://svn.fedorahosted.org/svn/corosync/trunk@794 fd59a12c-fef9-0310-b244-a6a79926bd2f
