Needs new knet crypto API.
If it's not available, then fall back to the old
API and forbid changing crypto while running.
To avoid us being dependant on the leader node, each
node sends its own crypto_reconfig_phase messages so
we can guarantee that the reconfiguration always completes
on each node.
Signed-off-by: Christine Caulfield <ccaulfie@redhat.com>
Reviewed-by: Jan Friesse <jfriesse@redhat.com>
Have string values stored in char arrays in totem_config
so we don't get into a mess with the pointers.
Also remove vsftype (which hasn't been used since corosync 1)
Use strncpy even though we know the string is fine. Keep covscan happy
Signed-off-by: Christine Caulfield <ccaulfie@redhat.com>
Reviewed-by: Jan Friesse <jfriesse@redhat.com>
reload failed for UDP[U] because they had saved pointers
to the interfaces[] array. so memcpy into that rather then
re-allocate it.
Also, move the check for different IP address families so
it also gets run at reload time.
Signed-off-by: Christine Caulfield <ccaulfie@redhat.com>
Reviewed-by: Jan Friesse <jfriesse@redhat.com>
Fix an 'error: success' stype message by propogating error_string
back down the stack.
Signed-off-by: Christine Caulfield <ccaulfie@redhat.com>
Reviewed-by: Jan Friesse <jfriesse@redhat.com>
To be more reliable & maintainable
The basic plan here is to fix reloads to be more stable
using read/parse/verify/build/commit stages, so that any errors
will not leave corosync in an unstable state. This should
also make the code more maintainable as currently the verify/commit
stages are horribly intertwined.
Also:
- Fix local_node_pos not being updated in the new map during validation
(broke adding and removing new nodes in the middle of the list).
- Fix reconfiguration so that nodes are indexed by nodeid and not their
position in the list. This is an old bug that's just been carried
over
Signed-off-by: Christine Caulfield <ccaulfie@redhat.com>
Reviewed-by: Jan Friesse <jfriesse@redhat.com>
Previously node id was logged ether as a %d (most often), %u, %x or
PRI.32 and ring id ether as %lld, %llx with various separators (., :, /)
between rep nodeid and seq. This seems to cause confusion.
This patch adds macros CS_PRI_NODE_ID, CS_PRI_RING_ID and
CS_PRI_RING_ID_SEQ (CS prefix = corosync, PRI modeled in spirit of
inttypes.h PRIx32) and makes code use them.
Signed-off-by: Jan Friesse <jfriesse@redhat.com>
Reviewed-by: Christine Caulfield <ccaulfie@redhat.com>
so that we get the nice log message when attempting to modify them at
runtime, just like for totem.crypto_* and co.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Jan Friesse <jfriesse@redhat.com>
A nozzle device is a pseudo ethernet device that routes network
traffic through a channel on the corosync knet network (NOT cpg or any
corosync internal service) to other nodes in the cluster. It allows
applications to take advantage of knet features such as multipathing,
automatic failover, link switching etc.
Signed-off-by: Christine Caulfield <ccaulfie@redhat.com>
Reviewed-by: Jan Friesse <jfriesse@redhat.com>
system.run_dir was a little bit unfortunate and confusing name. Rename
to state_dir makes more evident what is content of this directory. To
keep setting consistent with code, get_run_dir is changed to
get_state_dir.
Signed-off-by: Jan Friesse <jfriesse@redhat.com>
Reviewed-by: Christine Caulfield <ccaulfie@redhat.com>
Remove last used environment variable (reasons similar to removal of
COROSYNC_MAIN_CONFIG_FILE).
This environment variable was never documented, so document it properly.
Signed-off-by: Jan Friesse <jfriesse@redhat.com>
Reviewed-by: Christine Caulfield <ccaulfie@redhat.com>
The reason for this change is, that number of corosync CLI options
kind of exploded and scheduler based one are really beter to be kept in
config file.
Nice side-effect of this move is better "integration" with systemd,
because currently used EnvironmentFile should be really used for
environment and not that much for passing extra options to CLI.
Signed-off-by: Jan Friesse <jfriesse@redhat.com>
Reviewed-by: Christine Caulfield <ccaulfie@redhat.com>
Feature depends on existence of libqb function qb_log_file_reopen.
New function call is added into CFG service API. This function is
used by corosync-cfgtool which now accepts -L parameter.
Finally, logrotate "postrotate" script is calling
corosync-cfgtool -L to notify corosync, instead of using
copytruncate option.
Signed-off-by: Jan Friesse <jfriesse@redhat.com>
Reviewed-by: Christine Caulfield <ccaulfie@redhat.com>
Even if it's not used for anything else.
Also, make cfgtool show the correct link ID when links are not
contiguous
Signed-off-by: Christine Caulfield <ccaulfie@redhat.com>
Reviewed-by: Jan Friesse <jfriesse@redhat.com>
In my enthusiasm for removing code while integrating knet I
also deleted the correct code for returning IP address for a node,
so that only the IP addres of the local node was ever returned.
This commit restores the the previous code.
Also, because we always return INTERFACE_MAX interfaces now (they don't
have to be contiguous) set ss_family to zero if that interface is not
in use so that downstream apps know and don't display a lot of 0.0.0.0
Signed-off-by: Christine Caulfield <ccaulfie@redhat.com>
Reviewed-by: Jan Friesse <jfriesse@redhat.com>
Now we are using knet, it's possible to dynamically add, remove and
reconfigure links on the fly.
Also print 'n' for non-existant knet links. This will show up
only on loopback links >0. But it looks better than 'status ='
Signed-off-by: Christine Caulfield <ccaulfie@redhat.com>
Reviewed-by: Jan Friesse <jfriesse@redhat.com>
RRP doesn't exist any more so all the ring re-enable code is redundant.
I've removed it from the library and all the code that does anything,
but I've left the hole in the IPC just in case old libraries are
hanging around.
Signed-off-by: Christine Caulfield <ccaulfie@redhat.com>
Reviewed-by: Jan Friesse <jfriesse@redhat.com>
Uidgid entries parsed from configuration files now has prefix
(uidgid.config.) so they are distinguishable from dynamically added
entries. Entries added from config file are pruned on reload if no
longer exists in config file (dynamic one stays unaffected). Also whole
uidgid.config. prefix is made read only.
This make PCMK work again after configuration reload is called.
Signed-off-by: Jan Friesse <jfriesse@redhat.com>
Reviewed-by: Christine Caulfield <ccaulfie@redhat.com>
There were several places where defaults were not restored
if the keys were removed from corosync.conf and the file reloaded.
This patch adds those back so that reloading corosync.conf
has the expected effect when keys are deleted.
Signed-off-by: Christine Caulfield <ccaulfie@redhat.com>
Reviewed-by: Jan Friesse <jfriesse@redhat.com>
During SYNC, corosync-cfgtool -R/-H commands can pass through IPC then
send totem messages. This may corrupts
assembly_list_inuse/assembly_list_free if those messages are recedived
after SYNC is done.
The solution is marking related CFG APIs as
CS_LIB_FLOW_CONTROL_REQUIRED.
Signed-off-by: Jason HU <huzhijiang@gmail.com>
Reviewed-by: Jan Friesse <jfriesse@redhat.com>
Add the code to do the actual corosync.conf reload to cfg, along with
a corosync-cfgtool -R command to trigger it
Signed-off-by: Christine Caulfield <ccaulfie@redhat.com>
Reviewed-by: Jan Friesse <jfriesse@redhat.com>
drop all SOLARIS specific ifdefs and replace them with feature checks
Signed-off-by: Fabio M. Di Nitto <fdinitto@redhat.com>
Reviewed-by: Jan Friesse <jfriesse@redhat.com>
Commit which added number of addresses to srp_address structure didn't
count with totemsrp_ifaces_get where whole structure was copied instead
of addresses only. This is now fixed.
Also to make API totempg forward compatible, size of interfaces array
must be passed to ifaces_get like functions to prevent memory overwrite.
Signed-off-by: Jan Friesse <jfriesse@redhat.com>
Reviewed-by: Fabio M. Di Nitto <fdinitto@redhat.com>
this change breaks onwire compatibility.
cpg is the only user of sync_* interface and it's the only
service that will require extra testing.
Signed-off-by: Fabio M. Di Nitto <fdinitto@redhat.com>
Reviewed-by: Steven Dake <sdake@redhat.com>
Reviewed-by: Jan Friesse <jfriesse@redhat.com>
exec_init_fn now either returns NULL (success) or a string which indicates
the error that occured during service engine initialization. If an error
occurs, corosync will exit. This patch adds ykd and makes other suggestions
from Fabio Di Nitto.
Signed-off-by: Steven Dake <sdake@redhat.com>
Reviewed-by: Fabio Di Nitto <fdinitto@redhat.com>
These look ugly, are inconsistently done and just have
to be removed later in libqb before calling syslog.
Signed-off-by: Angus Salkeld <asalkeld@redhat.com>
Reviewed-by: Steven Dake <sdake@redhat.com>
Quorum is broken in this patch.
service.h needs to be cleaned up significantly
Signed-off-by: Steven Dake <sdake@redhat.com>
Reviewed-by: Fabio Di Nitto <fdinitto@redhat.com>
