It's just much easier to find out what is happening when message like
parser error: /etc/corosync/corosync.conf:39: Unexpected closing brace
is logged instead of
parser error: Unexpected closing brace
Signed-off-by: Jan Friesse <jfriesse@redhat.com>
Reviewed-by: Christine Caulfield <ccaulfie@redhat.com>
Corosync parser is not very clever, but it is able to detect more errors
without too much code.
1. Check if section name is not empty (just '{' character)
2. Check if there is no extra characters after opening bracket '{'
3. Check if there is no extra characters after or before closing bracket
'}'
4. Check if line is opening section, closing section or key/value
So following examples are reported as error:
totem {
version: 2
}}}}}}}}}}
Signed-off-by: Jan Friesse <jfriesse@redhat.com>
Reviewed-by: Christine Caulfield <ccaulfie@redhat.com>
When remove_whitespace function parameter is single character string
with whitespaces (like a:) then colon is not removed. Reason is end
condition end != start, which is valid for empty string, but invalid in
case described above. Solution is to check if *end is '\0'.
Signed-off-by: Jan Friesse <jfriesse@redhat.com>
Reviewed-by: Christine Caulfield <ccaulfie@redhat.com>
Token_warning is used to present information about
when the token was last received.
Signed-off-by: Chris Walker <cwalker@cray.com>
Reviewed-by: Jan Friesse <jfriesse@redhat.com>
This shrinks the srp_addr (and consequently every packet sent by
corosync) so that instead of containing loads of IP addresses to
identify a node, it just sends the nodeid.
This then allows us to make ring0 optional and replaceable when running
knet.
It also means that we need some other way of identifying the local
node in corosync.conf, so the nodelist.node.name entry is now mandatory
and is mapped to the local host using the same algorithm as used in
cman.
This code needs LOTS of testing as it touches a huge amount of totemsrp
and totemconfig.
Signed-off-by: Christine Caulfield <ccaulfie@redhat.com>
Reviewed-by: Jan Friesse <jfriesse@redhat.com>
When uid (or gid) value was empty string it was incorrectly converted to
0. Solution is to check input string emptines.
Thanks Bin Liu <bliu@suse.com> for reporting the bug.
Signed-off-by: Jan Friesse <jfriesse@redhat.com>
Reviewed-by: Bin Liu <bliu@suse.com>
readdir_r is deprecated in glibc 2.24 in favor of readdir (which became
thread safe). Also because corosync never calls read_uidgid_files_into_icmap
in muliple threads, no problem should appears even with libc where
readdir is thread-safe.
Signed-off-by: Bin Liu <bliu@suse.com>
Reviewed-by: Jan Friesse <jfriesse@redhat.com>
Corosync layers don't need to know the knet MTU size - this way
corosync fragments buffers only when they get larger than the
KNET buffer size (64K) and knet fragments below that based on
the actual MTU and transport considerations.
It is also now possible to configure knet to use UDP or SCTP
transports in corosync.conf. This is currently done per-link
so if you have more than 1 link you need several interface{}
stanzas inside totem{} to make it use other than the default
of UDP. if it's useful I might add the option of a global
default.
Signed-off-by: Christine Caulfield <ccaulfie@redhat.com>
This is a big update that removes RRP & MRP from the codebase
and makes knet the default transport for corosync. UDP & UDPU
are still (currently) supported but are deprecated. Also crypto
and mutiple interfaces are only supported over knet.
To compile this codebase you will need to install libknet from
https://github.com/fabbione/kronosnet
The corosync.conf(5) man page has been updated with info on the new
options. Older config files should still work but many options
have changed because of the knet implementation so configs should
be checked carefully. In particular any cluster using using RRP
over UDP or UDPU will not start as RRP is no longer present. If you
need multiple interface support then you should be using the knet transport.
Knet brings many benefits to the corosync codebase, it provides support
for more interfaces than RRP (up to 8), will be more reliable in the event
of network outages and allows dynamic reconfiguration of interfaces.
It also fixes the ifup/ifdown and 127.0.0.1 binding problems that have
plagued corosync/openais from day 1
Signed-off-by: Christine Caulfield <ccaulfie@redhat.com>
Uidgid entries parsed from configuration files now has prefix
(uidgid.config.) so they are distinguishable from dynamically added
entries. Entries added from config file are pruned on reload if no
longer exists in config file (dynamic one stays unaffected). Also whole
uidgid.config. prefix is made read only.
This make PCMK work again after configuration reload is called.
Signed-off-by: Jan Friesse <jfriesse@redhat.com>
Reviewed-by: Christine Caulfield <ccaulfie@redhat.com>
pass 'state' down the stack so that the state of the
hierarchy doesn't get lost when there are unexpected items
in the config hierarchy.
Don't bother setting 'state' on SECTION_END as there's no point
now we're going back up the stack.
Signed-off-by: Christine Caulfield <ccaulfie@redhat.com>
Reviewed-by: Jan Friesse <jfriesse@redhat.com>
Configuration option quorum.device.sync_timeout is available for setting
qdevice poll timeout for synchronization phase. Default value is 30
sec.
Signed-off-by: Jan Friesse <jfriesse@redhat.com>
Reviewed-by: Christine Caulfield <ccaulfie@redhat.com>
Fix several places where 'then' is used instead of 'than' in error
messages and a comment.
Signed-off-by: Christine Caulfield <ccaulfie@redhat.com>
Reviewed-by: Jan Friesse <jfriesse@redhat.com>
Previous safe_atoi didn't check range of input values so if for example
user used -1 s token timeout, it was converted to UINT32_MAX without
letting user know.
Another safe_atoi problem was using strtol. This works pretty well on
64-bit systems, where long integer is usually 64-bits long, sadly on
32-bit systems, it is usually 32-bit long. And because strtol returns
signed integer, it was not possible to enter 32-bit value with highest
bit set.
Solution is to use strtoll which is guaranteed to be at least 64-bits
long and check value range.
Also error message now contains also information about expected value
range.
Signed-off-by: Jan Friesse <jfriesse@redhat.com>
Reviewed-by: Christine Caulfield <ccaulfie@redhat.com>
Token coefficient is used only when nodelist is specified and contains
at least 3 nodes. If so, real token timeout is then computed as
token + (number_of_nodes - 2) * token_coefficient. This allows cluster
to scale without manually changing token timeout every time new
node is added. This value can be set to 0 resulting in effective
removal of this feature.
Signed-off-by: Jan Friesse <jfriesse@redhat.com>
Reviewed-by: Christine Caulfield <ccaulfie@redhat.com>
This patch adds the option to store expected_votes to
persistent storage. This is needed to allow_downscale
to operate properly.
Signed-off-by: Christine Caulfield <ccaulfie@redhat.com>
Pass an icmap hashtable into coroparse so we can load it into
a temporary one during reload
Signed-off-by: Christine Caulfield <ccaulfie@redhat.com>
Reviewed-by: Jan Friesse <jfriesse@redhat.com>
If configuration file contains closing brace before opening brace
at top level, configuration parsing is stopped and file is not
completely parsed. Solution is to detect extra closing brace and display
error.
Signed-off-by: Jan Friesse <jfriesse@redhat.com>
Reviewed-by: Fabio M. Di Nitto <fdinitto@redhat.com>
If colon was entered as part of value on end of value, it is deleted.
This makes impossible to enter (legal) IPv6 address ending with :: (like
fed0::).
Also when line contains both brace and colon, it is parsed twice (first
as key = value and second as start of section). This is handled by
continue in if section.
Signed-off-by: Jan Friesse <jfriesse@redhat.com>
Reviewed-by: Fabio M. Di Nitto <fdinitto@redhat.com>
openindiana toolchain is rather messy. This is the first cut only
Signed-off-by: Fabio M. Di Nitto <fdinitto@redhat.com>
Reviewed-by: Jan Friesse <jfriesse@redhat.com>
in previous incarnation of qdisk + cman, master_wins was restricted
to 2 node only.
In this new version it is possible to use master_wins for any cluster
size.
Let's assume a 4 node cluster. Each node votes 1, qdevice votes 3.
node 1 becomes qdevice master
node 2/3/4 no
In case of a split (let's assume 2/2):
partition 1: {4, 1}
partition 2: {1, 1}
node 2 in partition 1 would normally be unquorate, leaving effectively
only node 1 active.
master_wins allows node 2 to recognize to be part of a quorate partition
(since node1 is broadcasting that qdevice is voting) and retain
quorum.
node1 has never lost quorate status since qdevice is voting there.
Signed-off-by: Fabio M. Di Nitto <fdinitto@redhat.com>
Reviewed-by: Christine Caulfield <ccaulfie@redhat.com>
Reviewed-by: Jan Friesse <jfriesse@redhat.com>
Full path to key is now tested rather then key name only.
Signed-off-by: Jan Friesse <jfriesse@redhat.com>
Reviewed-by: Fabio M. Di Nitto <fdinitto@redhat.com>
SHA224 is not supported on RHEL6 and also it's kind of weird. Instead of
that, md5 can now be configured.
Signed-off-by: Jan Friesse <jfriesse@redhat.com>
Reviewed-by: Fabio M. Di Nitto <fdinitto@redhat.com>
add support for sha224/256/384/512
change config defaults to match coroparse and totemconfig
Signed-off-by: Fabio M. Di Nitto <fdinitto@redhat.com>
Reviewed-by: Jan Friesse <jfriesse@redhat.com>
Tomcrypt in corosync is for long time not updated. Because we have
support for libnss, libtomcrypt can be removed.
Also few leftovers (AES is 256 bits, not 128, ...) are removed.
Signed-off-by: Jan Friesse <jfriesse@redhat.com>
Reviewed-by: Steven Dake <sdake@redhat.com>
pload is a performance benchmark that measures the onwire
speed of corosync.
problem is that once pload has been executed, the cluster
is basically dead.
turn pload into a test tool, by removing corosync-pload tool
and user library.
cleanup pload code to make it more readable and drop lots
of unnecessary stuff.
add test/ploadstart tool that can configure and start pload
via cmap calls.
Signed-off-by: Fabio M. Di Nitto <fdinitto@redhat.com>
Reviewed-by: Steven Dake <sdake@redhat.com>
pointed out that leave_remove can be easily confused with the old
cman leave_remove behavior. The two are substantially different
and we need to avoid confusion both for users and our support team.
Signed-off-by: Fabio M. Di Nitto <fdinitto@redhat.com>
Reviewed-by: Christine Caulfield <ccaulfie@redhat.com>
