This extends the rename tests to make sure that every rename
scenario in the inner loop of git_diff_find_similar is actually
exercised. Also, fixes an incorrect assert that was in one of
the clauses that was not previously being exercised.
This moves the GIT_CVAR_ABBREV lookup out of the loop. Also, this
fixes git_diff_print_raw to actually use that constant instead of
hardcoding 7 characters.
This adds a couple more tests of different rename scenarios.
Also, this fixes a problem with the case where you have two
"split" deltas and the left half of one matches the right half of
the other. That case was already being handled, but in the wrong
order in a way that could result in bad output. Also, if the swap
also happened to put the other two halves into the correct place
(i.e. two files exchanged places with each other), then the second
delta was left with the SPLIT flag set when it really should be
cleared.
This flips rename detection around so instead of creating a
forward mapping from deltas to possible rename targets, instead
it creates a reverse mapping, looking at possible targets and
trying to find a source that they could have been renamed or
copied from. This is important because each output can only
have a single source, but a given source could map to multiple
outputs (in the form of COPIED records).
Additionally, this makes a couple of tweaks to the public rename
detection APIs, mostly renaming a couple of options that control
the behavior to make more sense and to be more like core Git.
I walked through the tests looking at the exact results and
updated the expectations based on what I saw. The new code is
different from the old because it cannot give some nonsense
results (like A was renamed to both B and C) which were part of
the outputs previously.
This adds a bunch more rename detection tests including checks
vs the working directory, the new exact match options, some more
whitespace variants, etc.
This also adds a git_futils_writebuffer helper function and uses
it in checkout. This is mainly added because I wanted an easy
way to write out a git_buf to disk inside my test code.
- Add new GIT_DIFF_FIND_EXACT_MATCH_ONLY flag to do similarity
matching without using the similarity metric (i.e. only compare
the SHA).
- Clean up the similarity measurement code to more rigorously
distinguish between files that are not similar and files that
are not comparable (previously, a 0 could either mean that the
files could not be compared or that they were totally different)
- When splitting a MODIFIED file into a DELETE/ADD pair, actually
make a DELETED/UNTRACKED pair if the right side of the diff is
from the working directory. This prevents an odd mix of ADDED
and UNTRACKED files on workdir diffs.
There are a number of bugs in the rename code that only were
obvious when I started testing it against large old repos with
more complex patterns. (The code to do that testing is not ready
to merge with libgit2, but I do plan to add more thorough tests.)
This contains a significant number of changes and also tweaks the
public API slightly to make emulating core git easier.
Most notably, this separates the GIT_DIFF_FIND_AND_BREAK_REWRITES
flag into FIND_REWRITES (which adds a self-similarity score to
every modified file) and BREAK_REWRITES (which splits the modified
deltas into add/remove pairs in the diff list). When you do a raw
output of core git, rewrites show up as M090 or such, not at A and
D output, so I wanted to be able to emulate that.
Publicly, this also changes the flags to be uint16_t since we
don't need values out of that range.
Internally, this contains significant changes from a number of
small bug fixes (like using the wrong side of the diff to decide
if the object could be found in the ODB vs the workdir) to larger
issues about which files can and should be compared and how the
various edge cases of similarity scores should be treated.
Honestly, I don't think this is the last update that will have to
be made to this code, but I think this moves us closer to correct
behavior and I tried to document the code so it would be easier
to follow..
I frequently want to the the first N digits of an OID formatted
as a string and I'd like it to be efficient. This function makes
that easy and I could rewrite the OID formatters in terms of it.
Expose a way to retrieve, along with the target git_object, the reference
pointed at by some revparse expression (`@{<-n>}` or
`<branchname>@{upstream}` syntax).
In theory, if there was a problem reading the REUC data, the
read_reuc() routine could have left uninitialized and invalid
data in the git_index vector. This moves the line that inserts a
new entry into the vector down to the bottom of the routine so we
know all the content is already valid. Also, per @linquize, this
uses calloc to ensure no uninitialized data.
This adds an example implementation that emulates git cat-file.
It is a convenient and relatively simple example of getting data
out of a repository.
Implementing this also revealed that there are a number of APIs
that are still not using const pointers to objects that really
ought to be. The main cause of this is that `git_vector_bsearch`
may need to call `git_vector_sort` before doing the search, so a
const pointer to the vector is not allowed. However, for tree
objects, with a little care, we can ensure that the vector of
tree entries is always sorted and allow lookups to take a const
pointer. Also, the missing const in commit objects just looks
like an oversight.
Since I added the GIT_IDXENTRY_STAGE macro to extract the stage
from a git_index_entry, we probably don't need an internal inline
function to do the same thing.
Under some strange circumstances, diffs can end up listing files
that we can't actually open successfully. Instead of aborting
the git_diff_find_similar, this makes it so that those files just
won't be considered as valid rename/copy targets instead.
It is possible for there to be a submodule in a repository with
no .gitmodules file (for example, if the user forgot to commit
the .gitmodules file). In this case, core Git will just create
an empty directory as a placeholder for the submodule but
otherwise ignore it. We were generating an error and stopping
the checkout. This makes our behavior match that of core git.
Unlike blob updates, symlink updates cannot be done "in place"
writing over an old symlink. This means that in checkout when we
realize that we can safely update a symlink, we still need to
remove the old one before writing the new.
When the last item in a diff was an untracked directory that only
contained ignored items, the loop to scan the contents would run
off the end of the iterator and dereference a NULL pointer. This
includes a test that reproduces the problem and a fix.
There was a problem found in the Rugged test suite where the
refdb_fs_backend__next function could exit too early in some
very specific hashing patterns for packed refs. This ports
the Rugged test to libgit2 and then fixes the bug.
Nobody should ever be using anything other than ALL at this level, so
remove the option altogether.
As part of this, git_reference_foreach_glob is now implemented in the
frontend using an iterator. Backends will later regain the ability of
doing the glob filtering in the backend.
If you use rename detection, the renamed and copied files would
not show any text diffs because the function that decides if
data should be loaded didn't know which sides of the diff to
load for those cases.
This adds a test that looks at the patch generated for diff
entries that are COPIED or RENAMED.
The git_status_file API was doing a hack to deal with files that
are inside ignored directories. The status scan was not reporting
any file in this case, so git_status_file would attempt a final
"stat()" call, and return IGNORED if the file actually existed.
On case-insensitive filesystems where core.ignorecase is set
incorrectly, this magic check can "succeed" and report a file
as ignored when it should actually return ENOTFOUND.
Now that we have the GIT_STATUS_OPT_RECURSE_IGNORED_DIRS, we can
use that flag to make sure that git_status_file() will look into
ignored directories and eliminate the hack completely, so we give
the correct error.
This clarifies the docs for git_repository_message and also adds
to the tests to explicitly check NUL termination of data when the
output buffer is smaller than the message size. There is a minor
behavior change so that a non-NULL output buffer will always be
NUL terminated (at length zero) if an error occurs.
When a repository is initialised, we need to probe to see if there is
a global config to load. If this is not the case, the user isn't able
to write to the global config without creating the backend and adding
it themselves, which is inconvenient and overly complex.
Unconditionally create and add a backend for the global config file
regardless of whether it exists as a convenience for users.
To enable this, we allow creating backends to files that do not exist
yet, changing the semantics somewhat, and making some tests invalid.
When tagopt is set to '--tags', we should only take the default tags
refspec into account and ignore any configured ones.
Bring the code into compliance.
When a patch contained an eofnl change (i.e. the last line either
gained or lost a newline), the oldno and newno line number values
for the lines in the last hunk of the patch were not useful. This
makes them behave in a more expected manner.
This adds a new line origin constant for the special line that
is used when both files end without a newline.
In the course of writing the tests for this, I was having problems
with modifying a file but not having diff notice because it was
the same size and modified less than one second from the start of
the test, so I decided to start working on nanosecond timestamp
support. This commit doesn't contain the nanosecond support, but
it contains the reorganization of maybe_modified and the hooks so
that if the nanosecond data were being read by stat() (or rather
being copied by git_index_entry__init_from_stat), then the nsec
would be taken into account.
This new stuff could probably use some more tests, although there
is some amount of it here.
Currently git_branch_set_upstream when passed a local branch
creates invalid configuration, for ex. if we setup branch
'tracking_master' to track local 'master' libgit2 generates
the following config
```
[branch "track_master"]
remote = .
merge = .refs/heads/track_master
```
The merge value is invalid and calling git_branch_upstream on
'tracking_master' results in invalid reference error.
It should do:
```
[branch "track_master"]
remote = .
merge = refs/heads/master
```
We use p->index_map.data to check whether the struct has been set up
and all the information about the index is stored there. This variable
gets set up halfway through the setup process, however, and a thread
can come along and use fields that haven't been written to yet.
Crucially, pack_entry_find_offset() needs to read the index version
(which is written after index_map) to know the offset and stride
length to pass to sha1_entry_pos(). If these values are wrong,
assertions in it will fail, as it will be reading bogus data.
Make index_version the last field to be written and switch from using
p->index_map.data to p->index_version as "git_pack_file is ready" flag
as we can use it to know if every field has been written.
Older versions of git would only write peeled entries for
items under refs/tags/. Newer versions will write them for
all refs, and we should be prepared to handle that.
There is an occasional assertion failure in sha1_entry_pos from
pack_entry_find_index when running threaded. Holding the mutex
around the code that grabs the index_map data and processes it
makes this assertion failure go away.
There are many paths through revparse that may return an error
code without reporting an error, I believe. This fixes one of
them. Because of the backtracking in revparse, it is pretty
complicated to fix the others.
A number of places were looking up option config values and then
not clearing the error codes if the values were not found. This
moves the repeated pattern into a shared routine and adds the
extra call to giterr_clear() when needed.
There are some cases, particularly where no loaded ODB backends
support a particular operation, where we would return an error
code without having set an error. This catches those cases and
reports that no ODB backends support the operation in question.
When diff encounters an untracked directory, there was a shortcut
that it took which is not compatible with core git. This makes
the default behavior no longer take that shortcut and instead look
inside the untracked directory to see if there are any untracked
files within it. If there are not, then the directory is treated
as an ignore directory instead of an untracked directory. This
has implications for the git_status APIs.
In preparation for more changes to the internal diff logic, it
seemed wise to split the very large git_diff__from_iterators into
separate functions that handle the four main cases (unmatched old
item, unmatched new item, unmatched new directory, and matched
old and new items). Hopefully this will keep the logic easier to
follow even as more cases have to be added to this code.
This removes the GIT_INLINE versions of the simple git_object
accessors and standardizes them with a helper macro in src/object.h
to build the function bodies.
Add a new git_oid_strcmp that compares a string OID with a hex
oid for sort order, and then reimplement git_oid_streq using it.
This actually should speed up git_oid_streq because it only reads
as far into the string as it needs to, whereas previously it would
convert the whole string into an OID and then use git_oid_cmp.
git_oid_ncmp was making some assumptions about the length of
the data - this shifts the check to the top of the loop so it
will work more robustly, limits the max, and adds some tests
to verify the functionality.
For update and create commands where all the objects are known to
exist in the remote, we must send an empty packfile. However, if all
we issue are delete commands, no packfile must be sent.
Take this into consideration for push.
This makes diff use the cvar cache for config options where
possible, and also adds support for a number of other config
options to diff including "diff.context", "diff.ignoreSubmodules",
"diff.noprefix", "diff.mnemonicprefix", and "core.abbrev".
To make this natural, this involved a rearrangement of the code
that allocates the diff object vs. the code that initializes it
based on the combination of options passed in by the user and
read from the config.
This commit includes tests for most of these new options as well.
This converts many of the config lookups that are done around the
library to use the repository config cache. This was everything I
could find that wasn't part of diff (which requires a larger fix).
This adds a bunch of additional config values to the repository
config value cache and makes it easier to add a simple boolean
config without creating enum values for each possible setting.
Also, this fixes a bug in git_config_refresh where the config
cache was not being cleared which could lead to potential
incorrect values.
The work to start using the new cached configs will come in the
next couple of commits...
When case insensitive tree iterators were added, we started reading
the case sensitivity of the index to decide if the tree should be
case sensitive. This is good for index-to-tree comparisons, but
for tree-to-tree comparisons, we should really default to doing a
case sensitive comparison unless the user really wants otherwise.
Rename git_packfile_check to git_packfile_alloc since it is now
being used more in that capacity. Fix the various places that use
it. Consolidate some repeated code in odb_pack.c related to the
allocation of a new pack_backend.
The indexer was creating a packfile object separately from the
code in pack.c which was a problem since I put a call to
git_mutex_init into just pack.c. This commit updates the pack
function for creating a new pack object (i.e. git_packfile_check())
so that it can be used in both places and then makes indexer.c
use the shared initialization routine.
There are also a few minor formatting and warning message fixes.
This removes the lock from the repository object and changes the
internals to use the new atomic git__compare_and_swap to update
the _odb, _config, _index, and _refdb variables in a threadsafe
manner.
This builds on the earlier thread safety work to make it so that
setting the odb, index, refdb, or config for a repository is done
in a threadsafe manner with minimized locking time. This is done
by adding a lock to the repository object and using it to guard
the assignment of the above listed pointers. The lock is only
held to assign the pointer value.
This also contains some minor fixes to the other work with pack
files to reduce the time that locks are being held to and fix an
apparently memory leak.
This adds create and free callback to the git_objects_table so
that more of the creation and destruction of objects can be table
driven instead of using switch statements. This also makes the
semantics of certain object creation functions consistent so that
we can make better use of function pointers. This also fixes a
theoretical error case where an object allocation fails and we
end up storing NULL into the cache.
When I was writing threading tests for the new cache, the main
error I kept running into was a pack file having it's content
unmapped underneath the running thread. This adds a lock around
the routines that map and unmap the pack data so that threads can
effectively reload the data when they need it.
This also required reworking the error handling paths in a couple
places in the code which I tried to make consistent.
Add a git_cache_set_max_object_size method that does more checking
around setting the max object size. Also add a git_cache_size to
read the number of objects currently in the cache. This makes it
easier to write tests.
This moves most of the refdb stuff over to the include/git2/sys
directory, with some minor shifts in function organization.
While I was making the necessary updates, I also removed the
trailing whitespace in a few files that I modified just because I
was there and it was bugging me.
Actually this renames git_commit_create_oid to
git_commit_create_from_oids and moves the API declaration to
include/git2/sys/commit.h since it is a dangerous API for general
use (because it doesn't check that the OID list items actually
refer to real objects).
This moves some of the odb_backend stuff that is related to the
internals of an odb_backend implementation into include/git2/sys.
Some of the stuff related to streaming I left in include/git2
because it seemed like it would be reasonably needed by a normal
user who wanted to stream objects into and out of the ODB.
Also, I added APIs for traversing the list of backends so that
some of the tests would not need to access ODB internals.
It used to be separate as an attempt to make the querying easier, but
it didn't work out that way, so put all the data together.
Add git_refspec_string() as well to get the original string, which is
now stored alongside the independent parts.
Introduce git_remote_{fetch,push}_refspecs() to get a list of refspecs
from the remote and rename the refspec-adding functions to a less
silly name.
Use this instead of the vector index hacks in the tests.
A remote can have a multitude of refspecs. Up to now our git_remote's
have supported a single one for each fetch and push out of simplicity
to get something working.
Let the remotes and internal code know about multiple remotes and get
the tests passing with them.
Instead of setting a refspec, the external users can clear all and add
refspecs. This should be enough for most uses, though we're still
missing a querying function.
This adds some hooks into the filesystem iterator so that the
workdir iterator can just become a wrapper around it. Then we
remove most of the workdir iterator code and just have it augment
the filesystem iterator with skipping .git entries, updating the
ignore stack, and checking for submodules.
This adds a new variant iterator that is a raw filesystem iterator
for scanning directories from a root. There is still more work to
do to blend this with the working directory iterator.
If the on-disk file has been staged (it's stat data matches the stat data
in the cache) then we need not hash the file to determine whether it
differs from the checkout target; instead we can simply use the oid in
the index.
This prevents recomputing a file's hash unnecessarily, prevents loading
the file (when filtering) and prevents edge cases where filters suggest
that a file is dirty immediately after git writes the file.
