Don't put the configuration in a subdir of the sandbox named
`config`, lest some tests decide to create their own directory
called `config`. Prefix with some underscores for uniqueness.
Ensure that `git_index_read_index` clears the uptodate bit on
files that it modifies.
Further, do not propagate the cache from an on-disk index into
another on-disk index. Although this should not be done, as
`git_index_read_index` is used to bring an in-memory index into
another index (that may or may not be on-disk), ensure that we do
not accidentally bring in these bits when misused.
Test that entries are only smudged when we write the index: the
entry smudging is to prevent us from updating an index in a way
that it would be impossible to tell that an item was racy.
Consider when we load an index: any entries that have the same
(or newer) timestamp than the index itself are considered racy,
and are subject to further scrutiny.
If we *save* that index with the same entries that we loaded,
then the index would now have a newer timestamp than the entries,
and they would no longer be given that additional scrutiny, failing
our racy detection! So test that we smudge those entries only on
writing the new index, but that we can detect them (in diff) without
having to write.
When there's no matching index entry (for whatever reason), don't
try to dereference the null return value to get at the id.
Otherwise when we break something in the index API, the checkout
test crashes for confusing reasons and causes us to step through
it in a debugger thinking that we had broken much more than we
actually did.
Keep track of entries that we believe are up-to-date, because we
added the index entries since the index was loaded. This prevents
us from unnecessarily examining files that we wrote during the
cleanup of racy entries (when we smudge racily clean files that have
a timestamp newer than or equal to the index's timestamp when we
read it). Without keeping track of this, we would examine every
file that we just checked out for raciness, since all their timestamps
would be newer than the index's timestamp.
When creating a filebuf, detect a directory that exists in our
target file location. This prevents a failure later, when we try
to move the lock file to the destination.
Test that on platforms without `core.symlinks`, we preserve symlinks
in `git_index_add_bypath`. (Users should correct the actual index
entry's mode to change a link to a regular file.)
When `core.symlinks = false`, we write the symlinks content (target)
to a regular file. We should ensure that when we later see that
regular file, we treat it specially - and that changing that regular
file would actually change the symlink target. (For compatibility
with Git for Windows).
We currently use the timestamp in order to decide whether a config file
has changed since we last read it.
This scheme falls down if the file is written twice within the same
second, as we fail to detect the file change after the first read in
that second.
Using calloc instead of malloc because the parse error will lead to an immediate free of committer (and its properties, which can segfault on free if undefined - test_refs_reflog_reflog__reading_a_reflog_with_invalid_format_returns_error segfaulted before the fix).
#3458
Provide a new merge option, GIT_MERGE_TREE_FAIL_ON_CONFLICT, which
will stop on the first conflict and fail the merge operation with
GIT_EMERGECONFLICT.
Test that nanoseconds are round-tripped correctly when we read
an index file that contains them. We should, however, ignore them
because we don't understand them, and any new entries in the index
should contain a `0` nsecs field, while existing preserving entries.
For most real use cases, repositories with alternates use them as main
object storage. Checking the alternate for objects before the main
repository should result in measurable speedups.
Because of this, we're changing the sorting algorithm to prioritize
alternates *in cases where two backends have the same priority*. This
means that the pack backend for the alternate will be checked before the
pack backend for the main repository *but* both of them will be checked
before any loose backends.
We moved the "main" parsing to use 64 bits for the timestamp, but the
quick parsing for the revwalk did not. This means that for large
timestamps we fail to parse the time and thus the walk.
Move this parser to use 64 bits as well.
xdiff craps the bed on large files. Treat very large files as binary,
so that it doesn't even have to try.
Refactor our merge binary handling to better match git.git, which
looks for a NUL in the first 8000 bytes.
As refdb and odb backends can be allocated by client code, libgit2
can’t know whether an alternative memory allocator was used, and thus
should not try to call `git__free` on those objects.
Instead, odb and refdb backend implementations must always provide
their own `free` functions to ensure memory gets freed correctly.
When we do not trust the on-disk mode, we use the mode of an existing
index entry. This allows us to preserve executable bits on platforms
that do not honor them on the filesystem.
If there is no stage 0 index entry, also look at conflicts to attempt
to answer this question: prefer the data from the 'ours' side, then
the 'theirs' side before falling back to the common ancestor.
git expects an empty line after the binary data:
literal X
...binary data...
<empty_line>
The last literal block of the generated patches were not containing the required empty line. Example:
diff --git a/binary_file b/binary_file
index 3f1b3f9098131cfecea4a50ff8afab349ea66d22..86e5c1008b5ce635d3e3fffa4434c5eccd8f00b6 100644
GIT binary patch
literal 8
Pc${NM&PdElPvrst3ey5{
literal 6
Nc${NM%g@i}0ssZ|0lokL
diff --git a/binary_file2 b/binary_file2
index 31be99be19470da4af5b28b21e27896a2f2f9ee2..86e5c1008b5ce635d3e3fffa4434c5eccd8f00b6 100644
GIT binary patch
literal 8
Pc${NM&PdElPvrst3ey5{
literal 13
Sc${NMEKbZyOexL+Qd|HZV+4u-
git apply of that diff results in:
error: corrupt binary patch at line 9: diff --git a/binary_file2 b/binary_file2
fatal: patch with only garbage at line 10
The proper formating is:
diff --git a/binary_file b/binary_file
index 3f1b3f9098131cfecea4a50ff8afab349ea66d22..86e5c1008b5ce635d3e3fffa4434c5eccd8f00b6 100644
GIT binary patch
literal 8
Pc${NM&PdElPvrst3ey5{
literal 6
Nc${NM%g@i}0ssZ|0lokL
diff --git a/binary_file2 b/binary_file2
index 31be99be19470da4af5b28b21e27896a2f2f9ee2..86e5c1008b5ce635d3e3fffa4434c5eccd8f00b6 100644
GIT binary patch
literal 8
Pc${NM&PdElPvrst3ey5{
literal 13
Sc${NMEKbZyOexL+Qd|HZV+4u-
This allows us to remove OS checks from source code, instead relying
on CMake to detect whether or not `struct stat` has the nanoseconds
members we rely on.
Test an initial submodule update, where we are trying to checkout
the submodule for the first time, and placing a file within the
submodule working directory with the same name as the submodule
(and consequently, the same name as the repository itself).
`git_futils_mkdir` does not blindly call `git_futils_mkdir_relative`.
`git_futils_mkdir_relative` is used when you have some base directory
and want to create some path inside of it, potentially removing blocking
symlinks and files in the process. This is not suitable for a general
recursive mkdir within the filesystem.
Instead, when `mkdir` is being recursive, locate the first existent
parent directory and use that as the base for `mkdir_relative`.
Untangle git_futils_mkdir from git_futils_mkdir_ext - the latter
assumes that we own everything beneath the base, as if it were
being called with a base of the repository or working directory,
and is tailored towards checkout and ensuring that there is no
bogosity beneath the base that must be cleaned up.
This is (at best) slow and (at worst) unsafe in the larger context
of a filesystem where we do not own things and cannot do things like
unlink symlinks that are in our way.
When a file exists on disk and we're checking out a file that differs
in executableness, remove the old file. This allows us to recreate the
new file with p_open, which will take the new mode into account and
handle setting the umask properly.
Remove any notion of chmod'ing existing files, since it is now handled
by the aforementioned removal and was incorrect, as it did not take
umask into account.
Ensure that we can iterate the filesystem root and that paths come
back well-formed, not with an additional '/'. (eg, when iterating
`c:/`, expect that we do not get some path like `c://autoexec.bat`).
