The interlocking on the write threads was not being done properly (index
entries were sometimes written out of order). With proper interlocking,
the threaded write is only marginally faster on big index files, and
slower on the smaller ones because of the overhead when creating
threads.
The threaded index writing has been temporarily disabled; after more
accurate benchmarks, if might be possible to enable it again only when
writing very large index files (> 1000 entries).
Signed-off-by: Vicent Marti <tanoku@gmail.com>
64-bit types stored in memory have to be truncated into 32 bits when
writing to disk. Was causing warnings in MSVC.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
In response to issue #60 (git_index_write really slow), the write_index
function has been rewritten to improve its performance -- it should now
be in par with the performance of git.git.
On top of that, if Posix Threads are available when compiling libgit2, a
new threaded writing system will be used (3 separate threads take care
of solving byte-endianness, hashing the contents of the index and
writing to disk, respectively). For very long Index files, this method
is up to 3x times faster than git.git.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
The priority value for different backends has been removed from the
public `git_odb_backend` struct. We handle that internally. The priority
value is specified on the `git_odb_add_alternate`.
This is convenient because it allows us to poll a backend twice with
different priorities without having to instantiate it twice.
We also differentiate between main backends and alternates; alternates have
lower priority and cannot be written to.
These changes come with some unit tests to make sure that the backend
sorting is consistent.
The libgit2 version has been bumped to 0.4.0.
This commit changes the external API:
CHANGED:
struct git_odb_backend
No longer has a `priority` attribute; priority for the backend
in managed internally by the library.
git_odb_add_backend(git_odb *odb, git_odb_backend *backend, int priority)
Now takes an additional priority parameter, the priority that
will be given to the backend.
ADDED:
git_odb_add_alternate(git_odb *odb, git_odb_backend *backend, int priority)
Add a backend as an alternate. Alternate backends have always
lower priority than main backends, and writing is disabled on
them.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Vicent Marti <tanoku@gmail.com>
The alternates file is now parsed, and the alternate ODB folders are
added as separate backends. This allows the library to efficiently query
the alternate folders.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
The `git__joinpath` function has been changed to use a statically
allocated buffer; we assume the buffer to be 4096 bytes, because fuck
you.
The new method also supports an arbritrary number of paths to join,
which may come in handy in the future.
Some methods which were manually joining paths with `strcpy` now use the
new function, namely those in `index.c` and `refs.c`.
Based on Emeric Fermas' original patch, which was using the old
`git__joinpath` because I'm stupid. Thanks!
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Unfortunately previous commit was only a partial fix, because it broke
SQLite support on platforms w/o pkg-config, e.g. Windows. To be honest
I just forgot about messy Windows.
Now if there is no pkg-config, then user must provide two variables:
SQLITE3_INCLUDE_DIRS and SQLITE3_LIBRARIES if (s)he wants to use SQLite
backend. These variables are added to cmake-gui for her/his convenience
unless they are set by FindPkgConfig module.
pkg-config should work also now in Cygwin.
FindPkgConfig obviously uses pkg-config's output for setting convenient
variables such as <PREFIX>_LIBRARIES or <PREFIX>_INCLUDE_DIRS. It also
sets <PREFIX>_FOUND to 1 if <PREFIX> module exists.
So why checking for SQLITE3_FOUND is better than (SQLITE3_LIBRARIES AND
SQLITE3_INCLUDE_DIRS)? Apart from obvious readability factor, latter
condition has strong assumption that both variables are filled with
appropriate paths, which is unjustifiable unless you add another
assumptions...
pkg-config by default strips -I/usr/include from Cflags and -L/usr/lib
from Libs if some environment variables are not set,
PKG_CONFIG_ALLOW_SYSTEM_CFLAGS and PKG_CONFIG_ALLOW_SYSTEM_LIBS
respectively. This behavior is sane, because it prevents polluting the
compilation and linking commands with superfluous entries.
In debian SQLITE3_INCLUDE_DIRS is empty for instance.
Remark for developers:
Always check commands invoked by CMake after changing CMakeLists.txt.
VERBOSE=1 cmake --build .
Removed `git_tree_add_entry_unsorted`. Now the `git_tree_add_entry`
method doesn't sort the entries array by default; entries are only
sorted lazily when required. This is done automatically by the library
(the `git_tree_sort_entries` call has been removed).
This should improve performance. No point on sorting entries all the time, anyway.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
We now have proper sonames in Mac OS X and Linux, proper versioning on
the pkg-config file and proper DLL naming in Windows.
The version of the library is defined exclusively in 'src/git2.h'; the build scripts
read it from there automatically.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Use pkg-config to find the library in Unix systems. In Win32, just set
manually the path to your libraries.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Configure again the build system to look for SQLite3. If the library is
found, the SQLite backend will be automatically compiled.
Enjoy *very* fast reads and writes.
MASTER PROTIP: Initialize the backend with ":memory" as the path to the
SQLite database for fully-hosted in-memory repositories. Rejoice.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
The `dirname` and `dirbase` methods have been replaced with the Android
implementation, which is actually compilant to some kind of standard.
A new method `topdir` has been added, which returns the topmost
directory in a path.
These changes fix issue #49:
`gitfo_prettify_dir_path` converts "./.git/" to ".git/", so
the code at src/repository.c:190 goes out of bounds when
trying to find the topmost directory.
The new `git__topdir` method handles this gracefully, and the
fixed `git__dirname` now returns the proper value for the
repository's working dir.
E.g.
/repo/.git/ ==> working dir '/repo/'
.git/ ==> working dir '.'
Signed-off-by: Vicent Marti <tanoku@gmail.com>
git_revwalk_next now returns an error code when the iteration is over.
git_repository_index now returns an error code when the index file could
not be opened.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Don't allow access to any tree entries whilst the entries array is
unsorted. We keep track on when the array is unsorted, and any methods
that access the array while it is unsorted now sort the array before
accessing it.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
If plain strcmp is used, as this code did before, the final sorting may
end up different from what git-add would do (for example, 'boost'
appearing before 'boost-build.jam', because Git sorts as if it were
spelled 'boost/').
If the sorting is incorrect like this, Git 1.7.4 insists that unmodified
files have been modified. For example, my test repository has these
four entries:
drwxr-xr-x 199 johnw wheel 6766 Feb 2 17:21 boost
-rw-r--r-- 1 johnw wheel 849 Feb 2 17:22 boost-build.jam
-rw-r--r-- 1 johnw wheel 989 Feb 2 17:21 boost.css
-rw-r--r-- 1 johnw wheel 6308 Feb 2 17:21 boost.png
Here is the output from git-ls-tree for these files, in a commit tree
created using git-add and git-commit:
100644 blob 8b8775433aef73e9e12609610ae2e35cf1e7ec2c boost-build.jam
100644 blob 986c4050fa96d825a1311c8e871cdcc9a3e0d2c3 boost.css
100644 blob b4d51fcd5c9149fd77f5ca6ed2b6b1b70e8fe24f boost.png
040000 tree 46537eeaa4d577010f19b1c9e940cae9a670ff5c boost
Here is the output for the same commit produced using libgit2:
040000 tree c27c0fd1436f28a6ba99acd0a6c17d178ed58288 boost
100644 blob 8b8775433aef73e9e12609610ae2e35cf1e7ec2c boost-build.jam
100644 blob 986c4050fa96d825a1311c8e871cdcc9a3e0d2c3 boost.css
100644 blob b4d51fcd5c9149fd77f5ca6ed2b6b1b70e8fe24f boost.png
Due to this reordering, git-status claims the three blobs are always
modified, no matter what I do using git-read-tree or git-reset or
git-checkout to update the index.
NIH Enterprises presents: a new testing system based on CuTesT, which is
faster than our previous one and fortunately uses no preprocessing on
the source files, which means we can run that from CMake.
The test suites have been gathered together into bigger files (one file
per suite, testing each of the different submodules of the library).
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Several changes have been committed to allow the user to create
in-memory references and write back to disk. Peeling of symbolic
references has been made explicit. Added getter and setter methods for
all attributes on a reference. Added corresponding documentation.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
All the commits have been squashed into a single one before refactoring
the final code, to keep everything tidy.
Individual commit messages are as follows:
Added repository reference looking up functionality placeholder.
Added basic reference database definition and caching infrastructure.
Removed useless constant.
Added GIT_EINVALIDREFNAME error and description. Added missing description for GIT_EBAREINDEX.
Added GIT_EREFCORRUPTED error and description.
Added GIT_ETOONESTEDSYMREF error and description.
Added resolving of direct and symbolic references.
Prepared the packed-refs parsing.
Added parsing of the packed-refs file content.
When no loose reference has been found, the full content of the packed-refs file is parsed. All of the new (i.e. not previously parsed as a loose reference) references are eagerly stored in the cached references storage.
The method packed_reference_file__parse() is in deer need of some refactoring. :-)
Extracted to a method the parsing of the peeled target of a tag.
Extracted to a method the parsing of a standard packed ref.
Fixed leaky removal of the cached references.
Ensured that a previously parsed packed reference isn't returned if a more up-to-date loose reference exists.
Enhanced documentation of git_repository_reference_lookup().
Moved some refs related constants from repository.c to refs.h.
Made parsing of a packed tag reference more robust.
Updated git_repository_reference_lookup() documentation.
Added some references to the test repository.
Added some tests covering tag references looking up.
Added some tests covering symbolic and head references looking up.
Added some tests covering packed references looking up.
