If it's not available, an error saying so will be returned when trying
to use a https:// URL.
This also unifies a lot of the network code to use git_transport in
many places instead of an socket descriptor.
Local fetch isn't implemented yet. Don't segfault on call, but set a
dummy for negotiate_fetch and terminate gracefully.
Reported-by: Brad Harder <bch@methodlogic.net>
Creating a workdir iterator on a directory with absolutely
no files was returning an error (GIT_ENOTFOUND) instead of
an iterator for nothing. This fixes that and includes two
new tests that cover that case.
GProf shows `git_text_gather_stats` as the most expensive call
in large diffs. The function calculates a lot of information
that is not actually used and does not do so in a optimal
order. This introduces a tuned `git_buf_is_binary` function
that executes the same algorithm in a fraction of the time.
There was a bug where tracked files inside directories that were
inside ignored directories where not being found by status. To
make that a little clearer, if you have a .gitignore with:
ignore/
And then have the following files:
ignore/dir/tracked <-- actually a tracked file
ignore/dir/untracked <-- should be ignored
Then we would show the tracked file as being removed (because
when we got the to contained item "dir/" inside the ignored
directory, we decided it was safe to skip -- bzzt, wrong!).
This update is much more careful about checking that we are
not skipping over any prefix of a tracked item, regardless of
whether it is ignored or not.
As documented in diff.c, this commit does create behavior that
still differs from core git with regards to the handling of
untracked files contained inside ignored directories. With
libgit2, those files will just not show up in status or diff.
With core git, those files don't show up in status or diff
either *unless* they are explicitly ignored by a .gitignore
pattern in which case they show up as ignored files.
Needless to say, this is a local behavior difference only, so
it should not be important and (to me) the libgit2 behavior
seems more consistent.
Ported the win32 implementations of gmtime_r,
localtime_r, and gettimeofday to be part of the
posix compatibility layer, and fixed
git_signature_now to use them.
The goal of this work is to rewrite git_status_file to use the
same underlying code as git_status_foreach.
This is done in 3 phases:
1. Extend iterators to allow ranged iteration with start and
end prefixes for the range of file names to be covered.
2. Improve diff so that when there is a pathspec and there is
a common non-wildcard prefix of the pathspec, it will use
ranged iterators to minimize excess iteration.
3. Rewrite git_status_file to call git_status_foreach_ext
with a pathspec that covers just the one file being checked.
Since ranged iterators underlie the status & diff implementation,
this is actually fairly efficient. The workdir iterator does
end up loading the contents of all the directories down to the
single file, which should ideally be avoided, but it is pretty
good.
From the description of git_revwalk_reset in revwalk.h the function should
clear all pushed and hidden commits, and leave the walker in a blank state (just like at creation).
Apparently everything gets reseted appart of pushed commits (walk->one and walk->twos)
This fix should reset the walker properly.
On Solaris, struct dirent is defined differently than Linux. The field
containing the path name is of size 0, rather than NAME_MAX. So, we need to
use a properly sized buffer on Solaris to avoid a stack overflow.
Also fix some DIR* leaks on cleanup.
This fix complements cb0ce16bbe and cover the following additional use cases
- retrieving an object which has been previously searched, found and cached
- retrieving an object through an non ambiguous abbreviated id
This makes the git attributes and git ignores cache check
stat information before using the file contents from the
cache. For cached files from the index, it checks the SHA
of the file instead. This should reduce the need to ever
call `git_attr_cache_flush()` in most situations.
This commit also fixes the `git_status_should_ignore` API
to use the libgit2 standard parameter ordering.
Since Solaris does not support some of the same flags as glibc fnmatch(),
we just use the implementation we have for Windows.
Now that it's no longer a windows-specific thing, I moved it into compat/
instead of win32/
This adds a bunch of template files to the initialization for
hooks, info/exclude, and description. This makes our initialized
repo look more like core gits.
These objects aren't considered as being advertised, so asking for
them will cause the remote end to close the connection. This makes the
checking in update_tips() unnecessary, because they don't get inserted
in the list.
When a repo is first created, there is no HEAD yet and attempting
to diff files in the index was showing nothing because a tree
iterator could not be constructed. This adds an "empty" iterator
and falls back on that when the head cannot be looked up.
The fix to support attrs on bare repos went a little too far
in trying to avoid using the working directory and ended up
not processing the input path quite correctly.
This has the nice side effect of making test_attr_repo__staging_properly_normalizes_line_endings_according_to_gitattributes_directives() test pass again on Windows. This test started to fail after commit 674a198 was applied.
'git commit' and 'git tag -a' enforce some conventions, like cleaning up excess whitespace and making sure that the last line ends with a '\n'. This fix replicates this behavior.
Fixlibgit2/libgit2sharp#117
Previously, it was defined in netops.c, but it's also needed in one of the
clar tests, so I figured we might as well just make it global for the
whole project.
Without it, the mingw32 linker won't resolve GetProcessId() (called from
the core/errors.c clar test) because of some conditionals in windows.h.
gitno_connect() can return an error or socket, which is fine on most
platforms where sockets are file descriptors (signed int), but on Windows,
SOCKET is an unsigned type, which is problematic when we are trying to
test if the socket was actually a negative error code.
This fix seperates the error code and socket in gitno_connect(), and fixes
the error handling in do_connect() functions to compensate. It appears
that git_connect() and the git-transport do_connect() functions had bugs
in the non-windows cases too (leaking sockets, and not properly reporting
connection error, respectively) so I went ahead and fixed those too.
There are three changes here:
- correctly propogate error code from failed object lookups
- make zlib inflate use our allocators
- add OID to notfound error in ODB lookups
Depending on the operation, we need to consider gitattributes
in both the work dir and the index. This adds a parameter to
all of the gitattributes related functions that allows user
control of attribute reading behavior (i.e. prefer workdir,
prefer index, only use index).
This fix also covers allowing us to check attributes (and
hence do diff and status) on bare repositories.
This was a somewhat larger change that I hoped because it had
to change the cache key used for gitattributes files.
Since strnlen is not supported on all platforms and since we
now have the shiny new git_text_is_binary in the filtering
code, let's convert diff binary detection to use the new stuff.
Currently, git_remote_disconnect not only closes the connection but also
frees the underlying transport object, making it impossible to write
code like
// fetch stuff
git_remote_download()
// close connection
git_remote_disconnect()
// call user provided callback for each ref
git_remote_update_tips(remote, callback)
because remote->refs points to references owned by the transport object.
This means, we have an idling connection while running the callback for
each reference.
Instead, allow immediate disconnect and free the transport later in
git_remote_free().
The recent 64-bit Windows fixes changed the return code in
git_pkt_parse_line() so it wouldn't signal a short buffer, breaking
the network code. Bring it back.
We were not following the git behavior for leading slashes
in path names when matching git ignores and git attribute
file patterns. This should fix issue #638.
This renamed `git_khash_str` to `git_strmap`, `git_hash_oid` to
`git_oidmap`, and deletes `git_hashtable` from the tree, plus
adds unit tests for `git_strmap`.
This updates khash.h with some extra features (like error checking
on allocations, ability to use wrapped malloc, foreach calls, etc),
creates two high-level wrappers around khash: `git_khash_str` and
`git_khash_oid` for string-to-void-ptr and oid-to-void-ptr tables,
then converts all of the old usage of `git_hashtable` over to use
these new hashtables.
For `git_khash_str`, I've tried to create a set of macros that
yield an API not too unlike the old `git_hashtable` API. Since
the oid hashtable is only used in one file, I haven't bother to
set up all those macros and just use the khash APIs directly for
now.
This converts the git attr related code (including ignores) and
the git diff related code (and implicitly the status code) to use
`git_pools` for storing strings. This reduces the number of small
blocks allocated dramatically.
This adds a `git_pool` object that can do simple paged memory
allocation with free for the entire pool at once. Using this,
you can replace many small allocations with large blocks that
can then cheaply be doled out in small pieces. This is best
used when you plan to free the small blocks all at once - for
example, if they represent the parsed state from a file or data
stream that are either all kept or all discarded.
There are two real patterns of usage for `git_pools`: either
for "string" allocation, where the item size is a single byte
and you end up just packing the allocations in together, or for
"fixed size" allocation where you are allocating a large object
(e.g. a `git_oid`) and you generally just allocation single
objects that can be tightly packed. Of course, you can use it
for other things, but those two cases are the easiest.
This allows the caller to update an internal structure or update the
user output with the tips that were updated.
While in the area, only try to update the ref if the value is
different from its old one.
Trying to send every single line immediately won't give us any speed
improvement and duplicates the code we need for other transports. Make
the git transport use the same buffer functions as HTTP.
This changes the git_remote_download() API, but the existing one is
silly, so you don't get to complain.
The new API allows to know how much data has been downloaded, how many
objects we expect in total and how many we've processed.
The code used to assume that there had to be data after the newline in
a tree cache extension entry. This isn't true for a childless
invalidated entry if it's the last one, as there won't be any children
nor a hash to take up space.
Adapt the off-by-one comparison to also work in this case. Fixes#633.
git_repository_free() calls git_odb_free() if the owned odb is not null.
According to the doc, when setting a new odb through git_repository_set_odb() the caller has to take care of releasing the odb by himself.
This fixes a possible compilation issue (when GIT_WIN32 was not set) which was introduced in revision 69a4bc1988.
Signed-off-by: Sven Strickroth <email@cs-ware.de>
The code used to assume that there had to be data after the newline in
a tree cache extension entry. This isn't true for a childless
invalidated entry if it's the last one, as there won't be any children
nor a hash to take up space.
Adapt the off-by-one comparison to also work in this case. Fixes#633.
Adds a new public reference function `git_reference_lookup_oid`
that directly resolved a reference name to an OID without returning
the intermediate `git_reference` object (hence, no free needed).
Internally, this adds a `git_reference_lookup_resolved` function
that combines looking up and resolving a reference. This allows
us to be more efficient with memory reallocation.
The existing `git_reference_lookup` and `git_reference_resolve`
are reimplmented on top of the new utility and a few places in the
code are changed to use one of the two new functions.
git_repository_free() calls git_index_free() if the owned index is not null.
According to the doc, when setting a new index through git_repository_set_index() the caller has still to take care of releasing the index by itself.
In order to cope with this, this fix makes sure the index refcount is incremented when a new repository is being plugged a new index.
This adds preliminary support for pathspecs to diff and status.
The implementation is not very optimized (it still looks at
every single file and evaluated the the pathspec match against
them), but it works.
This will allow us to index a packfile as soon as we receive it from
the network as well as storing it with its final name so we don't need
to pass temporary file names around.
