This removes the lock from the repository object and changes the
internals to use the new atomic git__compare_and_swap to update
the _odb, _config, _index, and _refdb variables in a threadsafe
manner.
This builds on the earlier thread safety work to make it so that
setting the odb, index, refdb, or config for a repository is done
in a threadsafe manner with minimized locking time. This is done
by adding a lock to the repository object and using it to guard
the assignment of the above listed pointers. The lock is only
held to assign the pointer value.
This also contains some minor fixes to the other work with pack
files to reduce the time that locks are being held to and fix an
apparently memory leak.
When creating files, instead of actually using GIT_FILEMODE_BLOB
and the other various constants that happen to correspond to
mode values, apparently I should be just using 0666 and 0777, and
relying on the umask to clear bits and make the value sane.
This fixes the rules for copying a template directory and fixes
the checks to match that new behavior. (Further changes to the
checkout logic to follow separately.)
The new tests were not taking core.filemode into account when
testing file modes after repo initialization. Fixed that and some
other Windows warnings that have crept in.
When PR #1359 removed the hooks from the test resources/template
directory, it made me realize that the tests for
git_repository_init_ext using templates must be pretty shabby
because we could not have been testing if the hooks were getting
created correctly.
So, this started with me recreating a couple of hooks, including
a sample and symlink, and adding tests that they got created
correctly in the various circumstances, including with the SHARED
modes, etc. Unfortunately this uncovered some issues with how
directories and symlinks were copied and chmod'ed. Also, there
was a FIXME in the code related to the chmod behavior as well.
Going back over the directory creation logic for setting up a
repository, I found it was a little difficult to read and could
result in creating and/or chmod'ing directories that the user
almost certainly didn't intend.
So that let to this work which makes repo initialization much
more careful (and hopefully easier to follow). It required a
couple of extensions / changes to core fileops utilities, but I
also think those are for the better, at least for git_futils_cp_r
in terms of being careful about what actions it takes.
This is an intermin solution. While this essentially disables the
--shared flag feature, previously external templates did not work
at all. This change fixes the previously corrected, and since
then failing, repo_init__extended_with_template() test.
The problem is now documented in the source code comments.
Added `struct git_config_entry`: a git_config_entry contains the key, the value, and the config file level from which a config element was found.
Added `git_config_open_level`: build a single-level focused config object from a multi-level one.
We are now storing `git_config_entry`s in the khash of the config_file
This file is not just read if the global config file (%HOME%/.gitconfig)
is not found, however, it is used everytime but with lower priority.
Signed-off-by: Sven Strickroth <email@cs-ware.de>
Fixed some minor `git_repository_hashfile` issues:
- Fixed incorrect doc (saying that repo could be NULL)
- Added checking of object type value to acceptable ones
- Added more tests for various parameter permutations
The existing `git_odb_hashfile` does not apply text filtering
rules because it doesn't have a repository context to evaluate
the correct rules to apply. This adds a new hashfile function
that will apply repository-specific filters (based on config,
attributes, and filename) before calculating the hash.
This is a big redesign of the git_submodule_status API and the
implementation of the redesigned API. It also fixes a number of
bugs that I found in other parts of the submodule API while
writing the tests for the status part.
This also fixes a couple of bugs in the iterators that had not
been noticed before - one with iterating when there is a gitlink
(i.e. separate-work-dir) and one where I was treating anything
even vaguely submodule-like as a submodule, more aggressively
than core git does.
This cleans up a number of items suggested during code review
with @vmg, including:
* renaming "outside repo" config API to `git_config_open_default`
* killing the `git_config_open_global` API
* removing the `git_` prefix from the static functions in fileops
* removing some unnecessary functionality from the "cp" command
This extends git_repository_init_ext further with support for
initializing the repository from an external template directory
and with support for the "create shared" type flags that make a
set GID repository directory.
This also adds tests for much of the new functionality to the
existing `repo/init.c` test suite.
Also, this adds a bunch of new utility functions including a
very general purpose `git_futils_mkdir` (with the ability to
make paths and to chmod the paths post-creation) and a file
tree copying function `git_futils_cp_r`. Also, this includes
some new path functions that were useful to keep the code
simple.
The extended version of repository init adds support for many
of the things that you can do with `git init` and sets up
structures that will make it easier to extend further in the
future.
The 'git revert/cherry-pick/merge -n' commands leave .git/MERGE_MSG
behind so that git-commit can find it. As we don't yet support these
operations, users who are shelling out to let git perform these
operations haven't had a convenient way to get this message.
These functions allow the user to retrieve the message and remove it
when she's created the commit.
This added a flag to the `git_repository_set_workdir()` function
that enables generation of a `.git` gitlink file that links the
new workdir to the parent repository. Essentially, the flag tells
the function to write out the changes to disk to permanently set
the workdir of the repository to the new path.
If you pass this flag as true, then setting the workdir to something
other than the default workdir (i.e. the parent of the .git repo
directory), will create a plain file named ".git" with the standard
gitlink contents "gitdir: <repo-path>", and also update the
"core.worktree" and "core.bare" config values.
Setting the workdir to the default repo workdir will clear the
core.worktree flag (but still permanently set core.bare to false).
BTW, the libgit2 API does not currently provide a function for
clearing the workdir and converting a non-bare repo into a bare one.
When the repository was reinitialized, every configuration change in repo_init_config() was directly performed against the file on the filesystem. However, a previous version of the configuration had previously been loaded in memory and attached to the repository, in repo_init_reinit().
The repository was unaware of the change and the stale cached version of the configuration never refreshed.
The call to repo_init_reinit already takes care of opening the
repository and giving us a git_repository object to give to the
caller. There is no need to call git_repository_open again.
This fixes git_index_add and git_index_append to behave more like
core git, preserving old filemode data in the index when adding
and/or appending with core.filemode = false.
This also has placeholder support for core.symlinks and
core.ignorecase, but those flags are not implemented (well,
symlinks has partial support for preserving mode information in
the same way that git does, but it isn't tested).
We used to consider a missing core.bare option to mean that the
repository was corrupt. This is too strict. Consider it a non-bare
repository if it's not set.
This adds a bunch of template files to the initialization for
hooks, info/exclude, and description. This makes our initialized
repo look more like core gits.
Depending on the operation, we need to consider gitattributes
in both the work dir and the index. This adds a parameter to
all of the gitattributes related functions that allows user
control of attribute reading behavior (i.e. prefer workdir,
prefer index, only use index).
This fix also covers allowing us to check attributes (and
hence do diff and status) on bare repositories.
This was a somewhat larger change that I hoped because it had
to change the cache key used for gitattributes files.
This adds a `git_pool` object that can do simple paged memory
allocation with free for the entire pool at once. Using this,
you can replace many small allocations with large blocks that
can then cheaply be doled out in small pieces. This is best
used when you plan to free the small blocks all at once - for
example, if they represent the parsed state from a file or data
stream that are either all kept or all discarded.
There are two real patterns of usage for `git_pools`: either
for "string" allocation, where the item size is a single byte
and you end up just packing the allocations in together, or for
"fixed size" allocation where you are allocating a large object
(e.g. a `git_oid`) and you generally just allocation single
objects that can be tightly packed. Of course, you can use it
for other things, but those two cases are the easiest.
git_repository_free() calls git_odb_free() if the owned odb is not null.
According to the doc, when setting a new odb through git_repository_set_odb() the caller has to take care of releasing the odb by himself.
Adds a new public reference function `git_reference_lookup_oid`
that directly resolved a reference name to an OID without returning
the intermediate `git_reference` object (hence, no free needed).
Internally, this adds a `git_reference_lookup_resolved` function
that combines looking up and resolving a reference. This allows
us to be more efficient with memory reallocation.
The existing `git_reference_lookup` and `git_reference_resolve`
are reimplmented on top of the new utility and a few places in the
code are changed to use one of the two new functions.
git_repository_free() calls git_index_free() if the owned index is not null.
According to the doc, when setting a new index through git_repository_set_index() the caller has still to take care of releasing the index by itself.
In order to cope with this, this fix makes sure the index refcount is incremented when a new repository is being plugged a new index.
Add a new command `git_repository_open_ext` with extended options
that control how searching for a repository will be done. The
existing `git_repository_open` and `git_repository_discover` are
reimplemented on top of it. We may want to change the default
behavior of `git_repository_open` but this commit does not do that.
Improve support for "gitdir" files where the work dir is separate
from the repo and support for the "separate-git-dir" config. Also,
add support for opening repos created with `git-new-workdir` script
(although I have only confirmed that they can be opened, not that
all functions work correctly).
There are also a few minor changes that came up:
- Fix `git_path_prettify` to allow in-place prettifying.
- Fix `git_path_root` to support backslashes on Win32. This fix
should help many repo open/discover scenarios - it is the one
function called when opening before prettifying the path.
- Tweak `git_config_get_string` to set the "out" pointer to NULL
if the config value is not found. Allows some other cleanup.
- Fix a couple places that should have been calling
`git_repository_config__weakptr` and were not.
- Fix `cl_git_sandbox_init` clar helper to support bare repos.
When processing status for a newly checked out repo, it is
possible that there will be submodules that have not yet been
initialized. The only way to distinguish these from untracked
directories is to have some knowledge of submodules. This
commit adds a new submodule API which, given a name or path,
can determine if it appears to be a submodule and can give
information about the submodule.
This converts blob.c, fileops.c, and all of the win32 files.
Also, various minor cleanups throughout the code. Plus, in
testing the win32 build, I cleaned up a bunch (although not
all) of the warnings with the 64-bit build.
This also includes droping `git_buf_lasterror` because it makes no sense
in the new system. Note that in most of the places were it has been
dropped, the code needs cleanup. I.e. GIT_ENOMEM is going away, so
instead it should return a generic `-1` and obviously not throw
anything.
This makes so much sense that I can't believe it hasn't been done
before. Kill the old `git_fbuffer` and read files straight into
`git_buf` objects.
Also: In order to fully support 4GB files in 32-bit systems, the
`git_buf` implementation has been changed from using `ssize_t` for
storage and storing negative values on allocation failure, to using
`size_t` and changing the buffer pointer to a magical pointer on
allocation failure.
Hopefully this won't break anything.
This update addresses all of the feedback in pull request #570.
The biggest change was to create actual linked list stacks for
storing the tree and workdir iterator state. This cleaned up
the code a ton. Additionally, all of the static functions had
their 'git_' prefix removed, and a lot of other unnecessary
changes were removed from the original patch.
This fixes an issue which was detected while using one of the libgit2 bindings [0]. The lack of the trailing forward slash led the name of references returned by git_reference_listall() to be prefixed with a forward slash.
[0]: https://github.com/libgit2/libgit2sharp/pull/108
