The vendor class identifier with the string "HTTPClient" is used to denote the
packet as responding to HTTP boot request. In DHCP4 config, the filename for
HTTP boot is the URL of the boot file while for PXE boot it is the path to the
boot file. As a consequence, the next-server becomes obseleted because the HTTP
URL already contains the server address for the boot file. For DHCP6 config,
there's no difference definition in existing config as dhcp6.bootfile-url can
be used to specify URL for both HTTP and PXE boot file.
This patch adds processing for "HTTPClient" vendor class identifier in DHCPACK
packet by treating it as HTTP format, not as the PXE format.
Signed-off-by: Michael Chang <mchang@suse.com>
Signed-off-by: Ken Lin <ken.lin@hpe.com>
Patch-Name: bootp-process-dhcpack-http-boot.patch
When grub2 image is booted from UEFI IPv6 PXE, the DHCPv6 Reply packet is
cached in firmware buffer which can be obtained by PXE Base Code protocol. The
network interface can be setup through the parameters in that obtained packet.
Signed-off-by: Michael Chang <mchang@suse.com>
Signed-off-by: Ken Lin <ken.lin@hpe.com>
Patch-Name: efinet-uefi-ipv6-pxe-support.patch
Implement new net_bootp6 command for IPv6 network auto configuration via the
DHCPv6 protocol (RFC3315).
Signed-off-by: Michael Chang <mchang@suse.com>
Signed-off-by: Ken Lin <ken.lin@hpe.com>
Patch-Name: bootp-new-net_bootp6-command.patch
Allow specifying port numbers for http and tftp paths, and allow ipv6 addresses
to be recognized with brackets around them, which is required to specify a port
number
Patch-Name: net-read-bracketed-ipv6-addr.patch
zfs-initramfs currently provides extraneous, undesired symlinks to
devices directly underneath /dev/ to satisfy zpool's historical output
of unqualified device names. By including this environment variable to
signal our intent to zpool, zfs-linux packages can drop the symlink
behavior when updating to its upstream or backported output behavior.
Bug: https://savannah.gnu.org/bugs/?43653
Bug-Debian: https://bugs.debian.org/824974
Bug-Ubuntu: https://bugs.launchpad.net/bugs/1527727
Last-Update: 2016-11-01
Patch-Name: zpool-full-device-name.patch
Add fallback boot entries for alternative installed init systems. Based
on patches from Michael Biebl and Didier Roche.
Bug-Debian: https://bugs.debian.org/757298
Bug-Debian: https://bugs.debian.org/773173
Forwarded: no
Last-Update: 2017-06-23
Patch-Name: mkconfig-other-inits.patch
Add an extra option to grub-install "--force-extra-removable". On EFI
platforms, this will cause an extra copy of the grub-efi image to be
written to the appropriate removable media patch
/boot/efi/EFI/BOOT/BOOT$ARCH.EFI as well. This will help with broken
UEFI implementations where the firmware does not work when configured
with new boot paths.
Signed-off-by: Steve McIntyre <93sam@debian.org>
Bug-Debian: https://bugs.debian.org/767037https://bugs.debian.org/773092
Forwarded: Not yet
Last-Update: 2014-12-20
Patch-Name: grub-install-extra-removable.patch
This is needed in case the Linux kernel is compiled with CONFIG_KERNEL_XZ or
CONFIG_KERNEL_LZO rather than CONFIG_KERNEL_GZ (gzio is already loaded by
grub.cfg today).
Signed-off-by: Ian Campbell <ijc@debian.org>
Bug-Debian: https://bugs.debian.org/755256
Forwarded: http://lists.gnu.org/archive/html/grub-devel/2014-11/msg00091.html
Last-Update: 2014-11-30
Patch-Name: insmod-xzio-and-lzopio-on-xen.patch
VSX bit is enabled by default for Power7 and Power8 CPU models,
so we need to disable them in order to avoid instruction exceptions.
Kernel will activate it when necessary.
* grub-core/kern/powerpc/ieee1275/startup.S: Disable VSX.
Also-By: Adhemerval Zanella <azanella@linux.vnet.ibm.com>
Also-By: Colin Watson <cjwatson@debian.org>
Origin: other, https://lists.gnu.org/archive/html/grub-devel/2014-09/msg00078.html
Last-Update: 2015-01-27
Patch-Name: ppc64el-disable-vsx.patch
Some powerpc machines require not updating the NVRAM. This can be handled
by existing grub-install command-line options, but it's friendlier to detect
this automatically.
On chrp_ibm machines, use the nvram utility rather than nvsetenv. (This
is possibly suitable for other machines too, but that needs to be
verified.)
Forwarded: no
Last-Update: 2014-10-15
Patch-Name: install-powerpc-machtypes.patch
This allows the controversial "recovery mode" text to be customised.
Bug-Ubuntu: https://bugs.launchpad.net/bugs/1240360
Forwarded: no
Last-Update: 2013-12-25
Patch-Name: mkconfig-recovery-title.patch
This is used for non-recovery Linux entries only; it enables
flicker-free booting if gfxpayload=keep is in use and a suitable kernel
is present.
Author: Andy Whitcroft <apw@canonical.com>
Forwarded: not-needed
Last-Update: 2013-12-25
Patch-Name: vt-handoff.patch
If this option is enabled, then do all of the following:
Don't display introductory message about line editing unless we're
actually offering a shell prompt. (This is believed to be a workaround
for a different bug. We'll go with this for now, but will drop this in
favour of a better fix upstream if somebody figures out what that is.)
Don't clear the screen just before booting if we never drew the menu in
the first place.
Remove verbose messages printed before reading configuration. In some
ways this is awkward because it makes debugging harder, but it's a
requirement for a smooth-looking boot process; we may be able to do
better in future. Upstream doesn't want this, though.
Disable the cursor as well, for similar reasons of tidiness.
Suppress kernel/initrd progress messages, except in recovery mode.
Suppress "GRUB loading" message unless Shift is held down. Upstream
doesn't want this, as it makes debugging harder. Ubuntu wants it to
provide a cleaner boot experience.
Author: Will Thompson <will@willthompson.co.uk>
Bug-Ubuntu: https://bugs.launchpad.net/bugs/386922
Bug-Ubuntu: https://bugs.launchpad.net/bugs/861048
Forwarded: (partial) http://lists.gnu.org/archive/html/grub-devel/2009-09/msg00056.html
Last-Update: 2019-06-24
Patch-Name: maybe-quiet.patch
In this case, we need both the signed shim as /EFI/BOOT/BOOTXXX.EFI
and signed Grub as /EFI/BOOT/grubXXX.efi.
Also install the BOOTXXX.CSV into /EFI/debian, and FBXXX.EFI into
/EFI/BOOT/ so that it can work when needed (*iff* we're updating the
NVRAM).
[cjwatson: Refactored also_install_removable somewhat for brevity and so
that we're using consistent case-insensitive logic.]
Bug-Debian: https://bugs.debian.org/930531
Last-Update: 2019-06-14
Patch-Name: grub-install-removable-shim.patch
Identical to the normal netboot image, but With a different baked-in
prefix value ("$vendor-installer/$ARCH/grub" instead of "/grub").
Helps to fix#928750, making d-i consistent in terms of PXE setup.
* Add the ntfs module to signed UEFI images. Closes: #923855
* Add the cpuid module to signed UEFI images. Closes: #928628
* Add the play module to signed UEFI images. Closes: #930290
In this case, we need both the signed shim as /EFI/BOOT/BOOTXXX.EFI
and signed Grub as /EFI/BOOT/grubXXX.efi.
Also install the BOOTXXX.CSV into /EFI/debian, and FBXXX.EFI into
/EFI/BOOT/ so that it can work when needed (*iff* we're updating the
NVRAM).
[cjwatson: Refactored also_install_removable somewhat for brevity and so
that we're using consistent case-insensitive logic.]
Bug-Debian: https://bugs.debian.org/930531
Last-Update: 2019-06-14
Patch-Name: grub-install-removable-shim.patch
Identical to the normal netboot image, but With a different baked-in
prefix value ("$vendor-installer/$ARCH/grub" instead of "/grub").
Helps to fix#928750, making d-i consistent in terms of PXE setup.
* Add the ntfs module to signed UEFI images. Closes: #923855
* Add the cpuid module to signed UEFI images. Closes: #928628
* Add the play module to signed UEFI images. Closes: #930290
Add IA64 to the architectures excluding a declaration for
grub_arch_sync_dma_caches().
IA64 does not include any of the source files that require the function,
but was overlooked for d8901e3ba1 ("cache: Fix compilation for ppc,
sparc and arm64").
Add it to the list of excluding architectures in order to not get
missing symbol errors when running grub-mkimage.
Reported-by: Alexander Graf <agraf@csgraf.de>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Unlike in case of disks in this case it's just a single place, so it's easier
to just #undef
Signed-off-by: Vladimir Serbinenko <phcoder@google.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Disable the -Wadress-of-packaed-member diagnostic for the grub_f2fs_label
function since the result is found to be false postive.
A pointer to the 'volume_name' member of 'struct grub_f2fs_superblock' is
guaranteed to be aligned as the offset of 'volume_name' within the struct
is dividable by the natural alignment on both 32- and 64-bit targets.
grub-core/fs/f2fs.c: In function ‘grub_f2fs_label’:
grub-core/fs/f2fs.c:1253:60: error: taking address of packed member of ‘struct grub_f2fs_superblock’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
1253 | *label = (char *) grub_f2fs_utf16_to_utf8 (data->sblock.volume_name);
| ~~~~~~~~~~~~^~~~~~~~~~~~
cc1: all warnings being treated as errors
Reported-by: Neil MacLeod <neil@nmacleod.com>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: Neil MacLeod <neil@nmacleod.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The arm relocation code has a manual special case for EFI binaries to
add the natural alignment to its own relocation awareness.
Since commit a51f953f4e ("mkimage: Align efi sections on 4k
boundary") we changed that alignment from 0x400 to 0x1000 bytes. Reflect
the change in that branch that we forgot as well.
This fixes running 32bit arm grub efi binaries for me again.
Fixes: a51f953f4e ("mkimage: Align efi sections on 4k boundary")
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reported-by: Steve McIntyre <steve@einval.com>
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Julien ROBIN <julien.robin28@free.fr>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Bug-Debian: https://bugs.debian.org/927269
Origin: other, https://lists.gnu.org/archive/html/grub-devel/2019-04/msg00132.html
Last-Update: 2019-05-03
Patch-Name: arm-align-section-alignment-with-manual-reloc-offset.patch
When creating T32->A32 transition jumps, the relocation code in grub
will generate trampolines. These trampolines live in the .data section
of our PE binary which means they are not marked as executable.
This misbehavior was unmasked by commit a51f953f4e ("mkimage: Align
efi sections on 4k boundary") which made the X/NX boundary more obvious
because everything became page aligned.
To put things into proper order, let's move the arm trampolines into the
.text section instead. That way everyone knows they are executable.
Fixes: a51f953f4e ("mkimage: Align efi sections on 4k boundary")
Reported-by: Julien ROBIN <julien.robin28@free.fr>
Reported-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Julien ROBIN <julien.robin28@free.fr>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Bug-Debian: https://bugs.debian.org/927269
Origin: other, https://lists.gnu.org/archive/html/grub-devel/2019-04/msg00131.html
Last-Update: 2019-05-03
Patch-Name: arm-move-trampolines-into-code-section.patch
Some UEFI firmware is easily provoked into running out of space in its
variable storage. This is usually due to certain kernel drivers (e.g.
pstore), but regardless of the cause it can cause grub-install to fail
because it currently asks efibootmgr to delete and re-add entries, and
the deletion often doesn't result in an immediate garbage collection.
Writing variables frequently also increases wear on the NVRAM which may
have limited write cycles. For these reasons, it's desirable to find a
way to minimise writes while still allowing grub-install to ensure that
a suitable boot entry exists.
Unfortunately, efibootmgr doesn't offer an interface that would let
grub-install do this. It doesn't in general make very much effort to
minimise writes; it doesn't allow modifying an existing Boot* variable
entry, except in certain limited ways; and current versions don't have a
way to export the expected variable data so that grub-install can
compare it to the current data. While it would be possible (and perhaps
desirable?) to add at least some of this to efibootmgr, that would still
leave the problem that there isn't a good upstreamable way for
grub-install to guarantee that it has a new enough version of
efibootmgr. In any case, it's cumbersome and slow for grub-install to
have to fork efibootmgr to get things done.
Fortunately, a few years ago Peter Jones helpfully factored out a
substantial part of efibootmgr to the efivar and efiboot libraries, and
so it's now possible to have grub-install use those directly. We still
have to use some code from efibootmgr, but much less than would
previously have been necessary.
grub-install now reuses existing boot entries where possible, and avoids
writing to variables when the new contents are the same as the old
contents. In the common upgrade case where nothing needs to change, it
no longer writes to NVRAM at all. It's also now slightly faster, since
using libefivar is faster than forking efibootmgr.
Fixes Debian bug #891434.
Signed-off-by: Colin Watson <cjwatson@ubuntu.com>
Bug-Debian: https://bugs.debian.org/891434
Forwarded: https://lists.gnu.org/archive/html/grub-devel/2019-03/msg00119.html
Last-Update: 2019-03-23
Patch-Name: efi-variable-storage-minimise-writes.patch
On full-encrypted systems, including /boot, the current code omits
cryptodisk commands needed to open the drives if Secure Boot is enabled.
This prevents grub2 from reading any further configuration residing on
the encrypted disk.
This patch fixes this issue by adding the needed "cryptomount" commands in
the load.cfg file that is then copied in the EFI partition.
Bug-Debian: https://bugs.debian.org/917117
Last-Update: 2019-02-10
Patch-Name: uefi-secure-boot-cryptomount.patch
The change in 0c62a5b2 caused at_keyboard to fail on some
machines. Immediately initializing the keyboard in the module init if
the keyboard is ready makes the problem go away.
Bug-Debian: https://bugs.debian.org/741464
Last-Update: 2019-02-09
Patch-Name: at_keyboard-module-init.patch
The linuxefi command fails if used on a system without shim, even if
Secure Boot is disabled. There's no need to do the validation if we're
not in Secure Boot mode (an attacker could just boot a modified grub),
so skip this to make it easier to use the Linux EFI entry point even on
non-Secure Boot systems.
Last-Update: 2018-12-07
Patch-Name: linuxefi-skip-validation-without-secure-boot.patch
These don't work with and aren't needed by dynamically-loaded
completions.
Bug-Debian: https://bugs.debian.org/912852
Forwarded: no
Last-Update: 2018-11-16
Patch-Name: bash-completion-drop-have-checks.patch
grub currently copies the entire boot_params, which includes setting
sentinel byte to 0xff, which triggers sanitize_boot_params in the kernel
which in turn clears various boot_params variables, including the
indication that the bootloader chain is verified and thus the kernel
disables lockdown mode. According to the information on the Fedora bug
tracker, only the information from byte 0x1f1 is necessary, so start
copying from there instead.
Author: Luca Boccassi <bluca@debian.org>
Bug-Fedora: https://bugzilla.redhat.com/show_bug.cgi?id=1418360
Forwarded: no
Patch-Name: fix-lockdown.patch
In the URI device path node, any name rahter than address can be used for
looking up the resources so that DNS service become needed to get answer of the
name's address. Unfortunately the DNS is not defined in any of the device path
nodes so that we use the EFI_IP4_CONFIG2_PROTOCOL and EFI_IP6_CONFIG_PROTOCOL
to obtain it.
These two protcols are defined the sections of UEFI specification.
27.5 EFI IPv4 Configuration II Protocol
27.7 EFI IPv6 Configuration Protocol
include/grub/efi/api.h:
Add new structure and protocol UUID of EFI_IP4_CONFIG2_PROTOCOL and
EFI_IP6_CONFIG_PROTOCOL.
grub-core/net/drivers/efi/efinet.c:
Use the EFI_IP4_CONFIG2_PROTOCOL and EFI_IP6_CONFIG_PROTOCOL to obtain the list
of DNS server address for IPv4 and IPv6 respectively. The address of DNS
servers is structured into DHCPACK packet and feed into the same DHCP packet
processing functions to ensure the network interface is setting up the same way
it used to be.
Signed-off-by: Michael Chang <mchang@suse.com>
Signed-off-by: Ken Lin <ken.lin@hpe.com>
Patch-Name: efinet-set-dns-from-uefi-proto.patch
The PXE Base Code protocol used to obtain cached PXE DHCPACK packet is no
longer provided for HTTP Boot. Instead, we have to get the HTTP boot
information from the device path nodes defined in following UEFI Specification
sections.
9.3.5.12 IPv4 Device Path
9.3.5.13 IPv6 Device Path
9.3.5.23 Uniform Resource Identifiers (URI) Device Path
This patch basically does:
include/grub/efi/api.h:
Add new structure of Uniform Resource Identifiers (URI) Device Path
grub-core/net/drivers/efi/efinet.c:
Check if PXE Base Code is available, if not it will try to obtain the netboot
information from the device path where the image booted from. The DHCPACK
packet is recoverd from the information in device patch and feed into the same
DHCP packet processing functions to ensure the network interface is setting up
the same way it used to be.
Signed-off-by: Michael Chang <mchang@suse.com>
Signed-off-by: Ken Lin <ken.lin@hpe.com>
Patch-Name: efinet-set-network-from-uefi-devpath.patch
