In the URI device path node, any name rahter than address can be used for
looking up the resources so that DNS service become needed to get answer of the
name's address. Unfortunately the DNS is not defined in any of the device path
nodes so that we use the EFI_IP4_CONFIG2_PROTOCOL and EFI_IP6_CONFIG_PROTOCOL
to obtain it.
These two protcols are defined the sections of UEFI specification.
27.5 EFI IPv4 Configuration II Protocol
27.7 EFI IPv6 Configuration Protocol
include/grub/efi/api.h:
Add new structure and protocol UUID of EFI_IP4_CONFIG2_PROTOCOL and
EFI_IP6_CONFIG_PROTOCOL.
grub-core/net/drivers/efi/efinet.c:
Use the EFI_IP4_CONFIG2_PROTOCOL and EFI_IP6_CONFIG_PROTOCOL to obtain the list
of DNS server address for IPv4 and IPv6 respectively. The address of DNS
servers is structured into DHCPACK packet and feed into the same DHCP packet
processing functions to ensure the network interface is setting up the same way
it used to be.
Signed-off-by: Michael Chang <mchang@suse.com>
Signed-off-by: Ken Lin <ken.lin@hpe.com>
Patch-Name: efinet-set-dns-from-uefi-proto.patch
The PXE Base Code protocol used to obtain cached PXE DHCPACK packet is no
longer provided for HTTP Boot. Instead, we have to get the HTTP boot
information from the device path nodes defined in following UEFI Specification
sections.
9.3.5.12 IPv4 Device Path
9.3.5.13 IPv6 Device Path
9.3.5.23 Uniform Resource Identifiers (URI) Device Path
This patch basically does:
include/grub/efi/api.h:
Add new structure of Uniform Resource Identifiers (URI) Device Path
grub-core/net/drivers/efi/efinet.c:
Check if PXE Base Code is available, if not it will try to obtain the netboot
information from the device path where the image booted from. The DHCPACK
packet is recoverd from the information in device patch and feed into the same
DHCP packet processing functions to ensure the network interface is setting up
the same way it used to be.
Signed-off-by: Michael Chang <mchang@suse.com>
Signed-off-by: Ken Lin <ken.lin@hpe.com>
Patch-Name: efinet-set-network-from-uefi-devpath.patch
The vendor class identifier with the string "HTTPClient" is used to denote the
packet as responding to HTTP boot request. In DHCP4 config, the filename for
HTTP boot is the URL of the boot file while for PXE boot it is the path to the
boot file. As a consequence, the next-server becomes obseleted because the HTTP
URL already contains the server address for the boot file. For DHCP6 config,
there's no difference definition in existing config as dhcp6.bootfile-url can
be used to specify URL for both HTTP and PXE boot file.
This patch adds processing for "HTTPClient" vendor class identifier in DHCPACK
packet by treating it as HTTP format, not as the PXE format.
Signed-off-by: Michael Chang <mchang@suse.com>
Signed-off-by: Ken Lin <ken.lin@hpe.com>
Patch-Name: bootp-process-dhcpack-http-boot.patch
When grub2 image is booted from UEFI IPv6 PXE, the DHCPv6 Reply packet is
cached in firmware buffer which can be obtained by PXE Base Code protocol. The
network interface can be setup through the parameters in that obtained packet.
Signed-off-by: Michael Chang <mchang@suse.com>
Signed-off-by: Ken Lin <ken.lin@hpe.com>
Patch-Name: efinet-uefi-ipv6-pxe-support.patch
Implement new net_bootp6 command for IPv6 network auto configuration via the
DHCPv6 protocol (RFC3315).
Signed-off-by: Michael Chang <mchang@suse.com>
Signed-off-by: Ken Lin <ken.lin@hpe.com>
Patch-Name: bootp-new-net_bootp6-command.patch
Allow specifying port numbers for http and tftp paths, and allow ipv6 addresses
to be recognized with brackets around them, which is required to specify a port
number
Patch-Name: net-read-bracketed-ipv6-addr.patch
zfs-initramfs currently provides extraneous, undesired symlinks to
devices directly underneath /dev/ to satisfy zpool's historical output
of unqualified device names. By including this environment variable to
signal our intent to zpool, zfs-linux packages can drop the symlink
behavior when updating to its upstream or backported output behavior.
Bug: https://savannah.gnu.org/bugs/?43653
Bug-Debian: https://bugs.debian.org/824974
Bug-Ubuntu: https://bugs.launchpad.net/bugs/1527727
Last-Update: 2016-11-01
Patch-Name: zpool-full-device-name.patch
VSX bit is enabled by default for Power7 and Power8 CPU models,
so we need to disable them in order to avoid instruction exceptions.
Kernel will activate it when necessary.
* grub-core/kern/powerpc/ieee1275/startup.S: Disable VSX.
Also-By: Adhemerval Zanella <azanella@linux.vnet.ibm.com>
Also-By: Colin Watson <cjwatson@debian.org>
Origin: other, https://lists.gnu.org/archive/html/grub-devel/2014-09/msg00078.html
Last-Update: 2015-01-27
Patch-Name: ppc64el-disable-vsx.patch
Some powerpc machines require not updating the NVRAM. This can be handled
by existing grub-install command-line options, but it's friendlier to detect
this automatically.
On chrp_ibm machines, use the nvram utility rather than nvsetenv. (This
is possibly suitable for other machines too, but that needs to be
verified.)
Forwarded: no
Last-Update: 2014-10-15
Patch-Name: install-powerpc-machtypes.patch
If other operating systems are installed, then automatically unhide the
menu. Otherwise, if GRUB_HIDDEN_TIMEOUT is 0, then use keystatus if
available to check whether Shift is pressed. If it is, show the menu,
otherwise boot immediately. If keystatus is not available, then fall
back to a short delay interruptible with Escape.
This may or may not remain Ubuntu-specific, although it's not obviously
wanted upstream. It implements a requirement of
https://wiki.ubuntu.com/DesktopExperienceTeam/KarmicBootExperienceDesignSpec#Bootloader.
If the previous boot failed (defined as failing to get to the end of one
of the normal runlevels), then show the boot menu regardless.
Author: Richard Laager <rlaager@wiktel.com>
Author: Robie Basak <robie.basak@ubuntu.com>
Forwarded: no
Last-Update: 2015-09-04
Patch-Name: quick-boot.patch
If this option is enabled, then do all of the following:
Don't display introductory message about line editing unless we're
actually offering a shell prompt. (This is believed to be a workaround
for a different bug. We'll go with this for now, but will drop this in
favour of a better fix upstream if somebody figures out what that is.)
Don't clear the screen just before booting if we never drew the menu in
the first place.
Remove verbose messages printed before reading configuration. In some
ways this is awkward because it makes debugging harder, but it's a
requirement for a smooth-looking boot process; we may be able to do
better in future. Upstream doesn't want this, though.
Disable the cursor as well, for similar reasons of tidiness.
Suppress kernel/initrd progress messages, except in recovery mode.
Suppress "GRUB loading" message unless Shift is held down. Upstream
doesn't want this, as it makes debugging harder. Ubuntu wants it to
provide a cleaner boot experience.
Bug-Ubuntu: https://bugs.launchpad.net/bugs/386922
Bug-Ubuntu: https://bugs.launchpad.net/bugs/861048
Forwarded: (partial) http://lists.gnu.org/archive/html/grub-devel/2009-09/msg00056.html
Last-Update: 2019-05-24
Patch-Name: maybe-quiet.patch
If linuxefi fails to verify the kernel's signature, then refuse to boot.
Author: Steve Langasek <steve.langasek@canonical.com>
Author: Linn Crosetto <linn@hpe.com>
Forwarded: no
Last-Update: 2019-05-24
Patch-Name: linuxefi-use-if-secure-boot.patch
It may be possible, particularly in recovery situations, to be booted
using EFI on x86 when only the i386-pc target is installed, or on ARM
when only the arm-uboot target is installed. There's nothing actually
stopping us installing i386-pc or arm-uboot from an EFI environment, and
it's better than returning a confusing error.
Author: Steve McIntyre <93sam@debian.org>
Forwarded: no
Last-Update: 2019-05-24
Patch-Name: install-efi-fallback.patch
Function grub_strndup() may return NULL, this is called from
function grub_ieee1275_get_devname() which is then called from
function grub_ieee1275_encode_devname() to set device. The device
variable could then be used with a NULL pointer.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Colin Watson <cjwatson@ubuntu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Previously the setup_header length was just assumed to be the size of the
linux_kernel_params struct. The linux x86 32-bit boot protocol says that the
end of the linux_i386_kernel_header is at 0x202 + the byte value at 0x201 in
the linux_i386_kernel_header. So, calculate the size of the header using the
end of the linux_i386_kernel_header, rather than assume it is the size of the
linux_kernel_params struct.
Additionally, add some required members to the linux_kernel_params
struct and align the content of linux_i386_kernel_header struct with
it. New members naming was taken directly from Linux kernel source.
linux_kernel_params and linux_i386_kernel_header structs require more
cleanup. However, this is not urgent, so, let's do this after release.
Just in case...
Signed-off-by: Andrew Jeddeloh <andrew.jeddeloh@coreos.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Vladimir Serbinenko <phcoder@google.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
Function grub_efi_find_last_device_path() may return NULL when called
from grub_efidisk_get_device_name().
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Function grub_efi_find_last_device() path may return NULL when called
from is_child().
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Function grub_efi_find_last_device_path() may return constant NULL when
called from find_parent_device().
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Recent versions of binutils dropped support for the a.out and COFF
formats on sparc64 targets. Since the boot loader on sparc64 is
supposed to be an a.out binary and the a.out header entries are
rather simple to calculate in our case, we just write the header
ourselves instead of relying on external tools to do that.
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch is similiar to commit e795b9011 (RISC-V: Add libgcc helpers
for clz) but for SPARC target.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
This patch is similiar to commit e795b9011 (RISC-V: Add libgcc helpers
for clz) but for MIPS target.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
MIPS fallout cleanup after commit 4d4a8c96e (verifiers: Add possibility
to verify kernel and modules command lines).
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
PowerPC fallout cleanup after commit 4d4a8c96e (verifiers: Add possibility
to verify kernel and modules command lines) and ca0a4f689 (verifiers: File
type for fine-grained signature-verification controlling).
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
IA-64 fallout cleanup after commit 4d4a8c96e (verifiers: Add possibility
to verify kernel and modules command lines).
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
In addition to what was already there, Gnulib's <intprops.h> needs SCHAR_MIN,
SCHAR_MAX, SHRT_MIN, INT_MIN, LONG_MIN, and LONG_MAX. Fixes build on CentOS 7.
Reported-by: "Chen, Farrah" <farrah.chen@intel.com>
Signed-off-by: Colin Watson <cjwatson@ubuntu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Mirror behaviour of ELF loader in libxc: first look for Xen notes in
PT_NOTE segment, then in SHT_NOTE section and only then fallback to
a section with __xen_guest name. This fixes loading PV kernels that
Xen note have outside of PT_NOTE. While this may be result of a buggy
linker script, loading such kernel directly works fine, so make it work
with GRUB too. Specifically, this applies to binaries built from Unikraft.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Various GRUB utilities fail if the current directory doesn't exist,
because grub_find_device() chdirs to a different directory and then
fails when trying to chdir back. Gnulib's save-cwd module uses fchdir()
instead when it can, avoiding this category of problem.
Fixes Debian bug #918700.
Signed-off-by: Colin Watson <cjwatson@ubuntu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Mostly for cosmetic reasons, we add a "net_dhcp" command, which is (at the
moment) identical to the existing "net_bootp" command. Both actually trigger
a DHCP handshake now, and both should be able to deal with pure BOOTP servers.
We could think about dropping the DHCP options from the initial DISCOVER packet
when the user issues the net_bootp command, but it's unclear whether this is
really useful, as both protocols should be able to coexist.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Even though we were parsing some DHCP options sent by the server, so far
we are only using the BOOTP 2-way handshake, even when talking to a DHCP
server.
Change this by actually sending out DHCP DISCOVER packets instead of the
generic (mostly empty) BOOTP BOOTREQUEST packets.
A pure BOOTP server would ignore the extra DHCP options in the DISCOVER
packet and would just reply with a BOOTREPLY packet, which we also
handle in the code.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In respone to a BOOTREQUEST packet a BOOTP server would answer with a BOOTREPLY
packet, which ends the conversation for good. DHCP uses a 4-way handshake,
where the initial server respone is an OFFER, which has to be answered with
REQUEST by the client again, only to be completed by an ACKNOWLEDGE packet
from the server.
Teach the grub_net_process_dhcp() function to deal with OFFER packets,
and treat ACK packets the same es BOOTREPLY packets.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The BOOTP RFC describes the boot file name and the server name as being part
of the integral BOOTP data structure, with some limits on the size of them.
DHCP extends this by allowing them to be separate DHCP options, which is more
flexible.
Teach the code dealing with those fields to check for those DHCP options first
and use this information, if provided. We fall back to using the BOOTP
information if those options are not used.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
