Split up some of the functionality in grub_machine_get_bootlocation into
grub_ieee1275_get_boot_dev. This will allow for code reuse in a follow on
patch.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
IEEE Std 1275-1994 Standard for Boot (Initialization Configuration)
Firmware: Core Requirements and Practices
3.8.3 deblocker support package
Any package that uses the "deblocker" support package must define
the following method, which the deblocker uses as a low-level
interface to the device
block-size ( -- block-len ) Return "granularity" for accesses to this
device.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
IEEE 1275-1994 Standard for Boot (Initialization Configuration)
Firmware: Core Requirements and Practices
E.3.2.2 Bus-specific methods for bus nodes
A package implementing the scsi-2 device type shall implement the
following bus-specific method:
no-data-command ( cmd-addr -- error? )
Executes a simple SCSI command, automatically retrying under
certain conditions. cmd-addr is the address of a 6-byte command buffer
containing an SCSI command that does not have a data transfer phase.
Executes the command, retrying indefinitely with the same retry criteria
as retry-command.
error? is nonzero if an error occurred, zero otherwise.
NOTE no-data-command is a convenience function. It provides
no capabilities that are not present in retry-command, but for
those commands that meet its restrictions, it is easier to use.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
IEEE 1275-1994 Standard for Boot (Initialization Configuration)
Firmware: Core Requirements and Practices
E.3.2.2 Bus-specific methods for bus nodes
A package implementing the scsi-2 device type shall implement the
following bus-specific method:
set-address ( unit# target# -- )
Sets the SCSI target number (0x0..0xf) and unit number (0..7) to which
subsequent commands apply.
This function is for devices with #address-cells == 2
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Convert physical address to text unit-string.
Convert phys.lo ... phys-high, the numerical representation, to unit-string,
the text string representation of a physical address within the address
space defined by this device node. The number of cells in the list
phys.lo ... phys.hi is determined by the value of the #address-cells property
of this node.
This function is for devices with #address-cells == 4
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
decode-unit ( addr len -- phys.lo ... phys.hi )
Convert text unit-string to physical address.
Convert unit-string, the text string representation, to phys.lo ... phys.hi,
the numerical representation of a physical address within the address space
defined by this device node. The number of cells in the list
phys.lo ... phys.hi is determined by the value of the #address-cells
property of this node.
This function is for devices with #address-cells == 4
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
It enables net boot even when there is no bootp/dhcp server.
* grub-core/net/drivers/ieee1275/ofnet.c: Add grub_ieee1275_parse_bootpath and
call it at grub_ieee1275_net_config_real.
* grub-core/kern/ieee1275/init.c: Add bootpath to grub_ieee1275_net_config.
* include/grub/ieee1275/ieee1275.h: Likewise.
* grub-core/disk/ieee1275/ofdisk.c (grub_ofdisk_open): Get the block
size of the disk.
* (grub_ofdisk_get_block_size): New function.
* (grub_ofdisk_prepare): Use the correct block size.
* (grub_ofdisk_read): Likewise.
* (grub_ofdisk_write): Likewise.
* include/grub/ieee1275/ofdisk.h (grub_ofdisk_get_block_size):
New proto.
GRUB_IEEE1275_FLAG_CURSORONOFF_ANSI_BROKEN on mac.
* grub-core/term/ieee1275/console.c (grub_console_init_lately): Use
ieee1275-nocursor if GRUB_IEEE1275_FLAG_CURSORONOFF_ANSI_BROKEN is set.
* grub-core/term/terminfo.c (grub_terminfo_set_current): Add new type
ieee1275-nocursor.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_flag): New value
GRUB_IEEE1275_FLAG_CURSORONOFF_ANSI_BROKEN.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_flag): New enum values
GRUB_IEEE1275_FLAG_NO_OFNET_SUFFIX and
GRUB_IEEE1275_FLAG_VIRT_TO_REAL_BROKEN.
* grub-core/net/drivers/efi/efinet.c (grub_efinet_findcards): Use
txbufsize.
* grub-core/kern/ieee1275/cmain.c (grub_ieee1275_find_options): Use
compatible property to check for macs. Set
GRUB_IEEE1275_FLAG_NO_OFNET_SUFFIX and
GRUB_IEEE1275_FLAG_VIRT_TO_REAL_BROKEN on macs.
* grub-core/net/drivers/ieee1275/ofnet.c (card_open): Don't add suffix
if GRUB_IEEE1275_FLAG_NO_OFNET_SUFFIX is set.
(send_card_buffer): Use txbuf.
(grub_ofnet_findcards): Allocate txbuf. Simplify code flow and move
nested function out of the parent while on it.
GRUB_IEEE1275_FLAG_NO_TREE_SCANNING_FOR_DISKS is set.
* grub-core/kern/ieee1275/cmain.c (grub_ieee1275_find_options): Set
GRUB_IEEE1275_FLAG_NO_TREE_SCANNING_FOR_DISKS on IBM hardware.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_flag): New enum value
GRUB_IEEE1275_FLAG_NO_TREE_SCANNING_FOR_DISKS.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_flag): New enum value
GRUB_IEEE1275_FLAG_BROKEN_ADDRESS_CELLS.
* grub-core/kern/ieee1275/mmap.c (grub_machine_mmap_iterate): Ignore
adress_cells and size:cells if GRUB_IEEE1275_FLAG_BROKEN_ADDRESS_CELLS
is set.
* grub-core/kern/ieee1275/cmain.c (grub_ieee1275_find_options): Set
GRUB_IEEE1275_FLAG_BROKEN_ADDRESS_CELLS on powermacs.
Change ofnet.c to disknet.c and remove almost all ieee1275 specific code.
Create grub_net_malloc to handle iee1275 memory issues in a temporary solution.
GRUB_IEEE1275_FLAG_HAS_CURSORONOFF when appropriate.
* grub-core/term/ieee1275/ofconsole.c (grub_ofconsole_setcursor):
Use terminfo and don't use cursor-on/cursor-off unless it's known
to work.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_flag): New element
GRUB_IEEE1275_FLAG_HAS_CURSORONOFF.
an to list its information with command ls.
* fs/ieee1275/ofnet.c (grub_ofnet_open): parse parameters to determine netdisk data
* fs/ieee1275/ofnet.c (grub_ofnet_close): dealloc netdisk data
* include/grub/disk.h: added struct grub_netdisk_data
* include/grub/ieee1275/ofnet.h: added newline
* kern/disk.c (grub_disk_open): ignore partition check for netdisk
* normal/misc.c (grub_normal_print_device_info): added support to list netdisk information
GRUB_IEEE1275_FLAG_NO_PRE1_5M_CLAIM.
* kern/ieee1275/cmain.c (grub_ieee1275_find_options): Set
GRUB_IEEE1275_FLAG_NO_PRE1_5M_CLAIM on qemu.
* kern/ieee1275/init.c (grub_claim_heap): Don0t allocate below
1.5MiB if GRUB_IEEE1275_FLAG_NO_PRE1_5M_CLAIM is set.
Fix over-4GiB seek on sparc64.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_seek):
Replace pos_i and pos_lo with pos. All users updated.
* include/grub/powerpc/ieee1275/ieee1275.h (GRUB_IEEE1275_CELL_SIZEOF):
New constant.
* include/grub/sparc64/ieee1275/ieee1275.h (GRUB_IEEE1275_CELL_SIZEOF):
Likewise.
* kern/ieee1275/ieee1275.c (grub_ieee1275_seek): Split pos into pos_hi
and pos_lo.
grub_devalias_iterate() result instead of unconditional 0.
* disk/ieee1275/ofdisk.c (grub_ofdisk_iterate): Likewise.
Also, capture hook return value, either directly or via
grub_children_iterate(), and propagate to caller.
* include/grub/ieee1275/ieee1275.h (grub_devalias_iterate,
grub_children_iterate): Return value is now 'int' instead of
'grub_err_t'.
* kern/ieee1275/openfw.c (grub_children_iterate): Fix to behave
like a proper iterator, stopping when hooks return non-zero.
(grub_devalias_iterate): Likewise.
slots are of type grub_ieee1275_cell_t.
(grub_nand_read): Likewise.
* kern/ieee1275/ieee1275.c (IEEE1275_PHANDLE_INVALID,
IEEE1275_IHANDLE_INVALID): Use grub_ieee1275_cell_t since these
macros are used to compare values in arg/ret block of the call.
(grub_ieee1275_finddevice, grub_ieee1275_get_property,
grub_ieee1275_next_property, grub_ieee1275_get_property_length,
grub_ieee1275_instance_to_package, grub_ieee1275_package_to_path,
grub_ieee1275_instance_to_path, grub_ieee1275_write,
grub_ieee1275_read, grub_ieee1275_seek, grub_ieee1275_peer,
grub_ieee1275_child, grub_ieee1275_parent, grub_ieee1275_open,
grub_ieee1275_close, grub_ieee1275_set_property,
grub_ieee1275_set_color): All ieee1275 call arg slots are of type
grub_ieee1275_cell_t.
* kern/ieee1275/openfw.c (grub_map): Likewise.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_ihandle_t,
grub_ieee1275_phandle_t): Define as grub_unit32_t type.
grub_machine_mmap_iterate() interface (fixes a recently-introduced
build problem on i386-ieee1275):
* kern/ieee1275/openfw.c (grub_available_iterate): Moved from here ...
* kern/ieee1275/mmap.c (grub_machine_mmap_iterate): ... here. Add third
parameter `type'. Update all users of this function.
* conf/i386-ieee1275.rmk (kernel_elf_SOURCES): Add
`kern/ieee1275/mmap.c'.
* kern/ieee1275/init.c
* include/grub/ieee1275/ieee1275.h (grub_available_iterate): Replace
with ...
(grub_machine_mmap_iterate): ... this.
* include/grub/i386/pc/memory.h (grub_machine_mmap_iterate): Change
return type to `grub_err_t'. Update all implementations of this
function prototype.
* include/grub/i386/coreboot/memory.h (grub_machine_mmap_iterate):
Likewise.
* include/grub/ieee1275.h (grub_ieee1275_flag): New constant
GRUB_IEEE1275_FLAG_CANNOT_INTERPRET, GRUB_IEEE1275_FLAG_FORCE_CLAIM
and GRUB_IEEE1275_FLAG_NO_ANSI.
* kern/ieee1275/cmain.c (grub_ieee1275_find_options): Set flag
GRUB_IEEE1275_FLAG_CANNOT_INTERPRET, GRUB_IEEE1275_FLAG_FORCE_CLAIM
and GRUB_IEEE1275_FLAG_NO_ANSI for Open Hackware.
* kern/ieee1275/ieee1275.c (grub_ieee1275_interpret): Return
immediately if GRUB_IEEE1275_FLAG_CANNOT_INTERPRET is set.
* kern/ieee1275/init.c (grub_claim_heap): Claim memory directly if
GRUB_IEEE1275_FLAG_FORCE_CLAIM is set.
* term/ieee1275/ofconsole.c (grub_ofconsole_writeesc): Don't output
esc sequence on non ANSI terminal.
(grub_ofconsole_gotoxy): Emulate backspace key on non ANSI terminal.
* util/elf/grub-mkimage.c (add_segments): Move ELF header to the
beginning of file.
* Makefile.in (RMKFILES): Add missing arch i386-ieee1275 and
i386-linuxbios.
* commands/hexdump.c (grub_cmd_hexdump): Support dumping of device,
change the buffer size to 4096 for cdrom device.
* conf/i386-ieee1275.rmk (pkglib_MODULES): Add _linux.mod, linux.mod
and nand.mod.
(_linux_mod_SOURCES): New variable.
(_linux_mod_CFLAGS): Likewise.
(_linux_mod_LDFLAGS): Likewise.
(linux_mod_SOURCES): Likewise.
(linux_mod_CFLAGS): Likewise.
(linux_mod_LDFLAGS): Likewise.
(nand_mod_SOURCES): Likewise.
(nand_mod_CFLAGS): Likewise.
(nand_mod_LDFLAGS): Likewise.
* disk/ieee1275/ofdisk.c (grub_ofdisk_open): Return
GRUB_ERR_UNKNOWN_DEVICE instead of GRUB_ERR_BAD_DEVICE if no device
type property. (nand device in olpc don't have this property)
* include/grub/disk.h (grub_disk_dev_id): New macro
GRUB_DISK_DEVICE_NAND_ID.
* include/grub/i386/ieee1275/loader.h (grub_rescue_cmd_linux): New
function prototype.
(grub_rescue_cmd_initrd): Likewise.
* include/grub/i386/linux.h (GRUB_LINUX_OFW_SIGNATURE): New macro.
(linux_kernel_params): Add new member ofw_signature, ofw_num_items,
ofw_cif_handler and ofw_idt, adjust padding number.
* include/grub/i386/pc/memory.h (grub_upper_mem): Export it if
GRUB_MACHINE_IEEE1275 is defined.
* include/grub/ieee1275/ieee1275.h (grub_available_iterate):
Use NESTED_FUNC_ATTR attribute on the hook parameter.
* kern/powerpc/ieee1275/init.c (grub_claim_heap): Use NESTED_FUNC_ATTR
on nested function heap_init.
(grub_upper_mem): New variable for i386-ieee1275.
(grub_get_extended_memory): New function for i386-ieee1275.
(grub_machine_init): Call grub_get_extended_memory for i386-ieee1275.
* kern/powerpc/ieee1275/openfw.c (grub_available_iterate): Use
NESTED_FUNC_ATTR on the hook parameter. Don't quit if no device type
property.
* loader/i386/ieee1275/linux.c: New file.
* loader/i386/ieee1275/linux_normal.c: New file.
* disk/ieee1275/nand.c: New file.
