Check glyph's width and height against limits specified in font's
metadata. Reject the glyph (and font) if such limits are exceeded.
Signed-off-by: Zhang Boyang <zhangboyang.id@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In grub-core/video/readers/jpeg.c, the height and width of a JPEG image don't
have an upper limit for how big the JPEG image can be. In Coverity, this is
getting flagged as an untrusted loop bound. This issue can also seen in PNG and
TGA format images as well but Coverity isn't flagging it. To prevent this, the
constant IMAGE_HW_MAX_PX is being added to include/grub/bitmap.h, which has
a value of 16384, to act as an artificial limit and restrict the height and
width of images. This value was picked as it is double the current max
resolution size, which is 8K.
Fixes: CID 292450
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In some filesystem utils like mksquashfs, it will silently change
behaviour and cause timestamps to unexpectedly change. Reproducible
builds are good and useful for shipped artifacts, but this causes
build-time tests to fail.
The corpus was generating issues in grub_btrfs_read_logical() when
attempting to iterate over stripe entries in the superblock's
bootmapping.
In most cases the reason for the failure was that the number of stripes
in chunk->nstripes exceeded the possible space statically allocated in
superblock bootmapping space. Each stripe entry in the bootmapping block
consists of a grub_btrfs_key followed by a grub_btrfs_chunk_stripe.
Another issue that came up was that while calculating the chunk size,
in an earlier piece of code in that function, depending on the data
provided in the btrfs file system, it would end up calculating a size
that was too small to contain even 1 grub_btrfs_chunk_item, which is
obviously invalid too.
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The fuzzer is generating btrfs file systems that have chunks with
invalid combinations of stripes and substripes for the given RAID
configurations.
After examining the Linux kernel fs/btrfs/tree-checker.c code, it
appears that sub-stripes should only be applied to RAID10, and in that
case there should only ever be 2 of them.
Similarly, RAID single should only have 1 stripe, and RAID1/1C3/1C4
should have 2. 3 or 4 stripes respectively, which is what redundancy
corresponds.
Some of the chunks ended up with a size of 0, which grub_malloc() still
returned memory for and in turn generated ASAN errors later when
accessed.
While it would be possible to specifically limit the number of stripes,
a more correct test was on the combination of the chunk item, and the
number of stripes by the size of the chunk stripe structure in
comparison to the size of the chunk itself.
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
According to the btrfs code in Linux, the structure of a directory item
leaf should be of the form:
|struct btrfs_dir_item|name|data|
in GRUB the name len and data len are in the grub_btrfs_dir_item
structure's n and m fields respectively.
The combined size of the structure, name and data should be less than
the allocated memory, a difference to the Linux kernel's struct
btrfs_dir_item is that the grub_btrfs_dir_item has an extra field for
where the name is stored, so we adjust for that too.
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A corrupt f2fs file system might specify a name length which is greater
than the maximum name length supported by the GRUB f2fs driver.
We will allocate enough memory to store the overly long name, but there
are only F2FS_NAME_LEN bytes in the source, so we would read past the end
of the source.
While checking directory entries, do not copy a file name with an invalid
length.
Signed-off-by: Sudhakar Kuppusamy <sudhakar@linux.ibm.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A corrupt f2fs filesystem could have a block offset or a bitmap
offset that would cause us to read beyond the bounds of the nat
bitmap.
Introduce the nat_bitmap_size member in grub_f2fs_data which holds
the size of nat bitmap.
Set the size when loading the nat bitmap in nat_bitmap_ptr(), and
catch when an invalid offset would create a pointer past the end of
the allocated space.
Check against the bitmap size in grub_f2fs_test_bit() test bit to avoid
reading past the end of the nat bitmap.
Signed-off-by: Sudhakar Kuppusamy <sudhakar@linux.ibm.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A corrupt f2fs file system could specify a nat journal entry count
that is beyond the maximum NAT_JOURNAL_ENTRIES.
Check if the specified nat journal entry count before accessing the
array, and throw an error if it is too large.
Signed-off-by: Sudhakar Kuppusamy <sudhakar@linux.ibm.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In a similar vein to the previous patch, parse_line() would write
a NUL byte past the end of the buffer if there was an HTTP header
with a LF rather than a CRLF.
RFC-2616 says:
Many HTTP/1.1 header field values consist of words separated by LWS
or special characters. These special characters MUST be in a quoted
string to be used within a parameter value (as defined in section 3.6).
We don't support quoted sections or continuation lines, etc.
If we see an LF that's not part of a CRLF, bail out.
Fixes: CVE-2022-28734
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
GRUB has special code for handling an http header that is split
across two packets.
The code tracks the end of line by looking for a "\n" byte. The
code for split headers has always advanced the pointer just past the
end of the line, whereas the code that handles unsplit headers does
not advance the pointer. This extra advance causes the length to be
one greater, which breaks an assumption in parse_line(), leading to
it writing a NUL byte one byte past the end of the buffer where we
reconstruct the line from the two packets.
It's conceivable that an attacker controlled set of packets could
cause this to zero out the first byte of the "next" pointer of the
grub_mm_region structure following the current_line buffer.
Do not advance the pointer in the split header case.
Fixes: CVE-2022-28734
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
It's possible for data->sock to get torn down in tcp error handling.
If we unconditionally tear it down again we will end up doing writes
to an offset of the NULL pointer when we go to tear it down again.
Detect if it has been torn down and don't do it again.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Under tftp errors, we print a tftp error message from the tftp header.
However, the tftph pointer is a pointer inside nb, the netbuff. Previously,
we were freeing the nb and then dereferencing it. Don't do that, use it
and then free it later.
This isn't really _bad_ per se, especially as we're single-threaded, but
it trips up fuzzers.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A malicious tftp server can cause UAFs and a double free.
An attempt to read from a network file is handled by grub_net_fs_read(). If
the read is at an offset other than the current offset, grub_net_seek_real()
is invoked.
In grub_net_seek_real(), if a backwards seek cannot be satisfied from the
currently received packets, and the underlying transport does not provide
a seek method, then grub_net_seek_real() will close and reopen the network
protocol layer.
For tftp, the ->close() call goes to tftp_close() and frees the tftp_data_t
file->data. The file->data pointer is not nulled out after the free.
If the ->open() call fails, the file->data will not be reallocated and will
continue point to a freed memory block. This could happen from a server
refusing to send the requisite ack to the new tftp request, for example.
The seek and the read will then fail, but the grub_file continues to exist:
the failed seek does not necessarily cause the entire file to be thrown
away (e.g. where the file is checked to see if it is gzipped/lzio/xz/etc.,
a read failure is interpreted as a decompressor passing on the file, not as
an invalidation of the entire grub_file_t structure).
This means subsequent attempts to read or seek the file will use the old
file->data after free. Eventually, the file will be close()d again and
file->data will be freed again.
Mark a net_fs file that doesn't reopen as broken. Do not permit read() or
close() on a broken file (seek is not exposed directly to the file API -
it is only called as part of read, so this blocks seeks as well).
As an additional defence, null out the ->data pointer if tftp_open() fails.
That would have lead to a simple null pointer dereference rather than
a mess of UAFs.
This may affect other protocols, I haven't checked.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
I don't really understand what's going on here but fuzzing found
a bug where we read past the end of check_with. That's a C string,
so use grub_strlen() to make sure we don't overread it.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
grub_net_dns_lookup() takes as inputs a pointer to an array of addresses
("addresses") for the given name, and pointer to a number of addresses
("naddresses"). grub_net_dns_lookup() is responsible for allocating
"addresses", and the caller is responsible for freeing it if
"naddresses" > 0.
The DNS recv_hook will sometimes set and free the addresses array,
for example if the packet is too short:
if (ptr + 10 >= nb->tail)
{
if (!*data->naddresses)
grub_free (*data->addresses);
grub_netbuff_free (nb);
return GRUB_ERR_NONE;
}
Later on the nslookup command code unconditionally frees the "addresses"
array. Normally this is fine: the array is either populated with valid
data or is NULL. But in these sorts of error cases it is neither NULL
nor valid and we get a double-free.
Only free "addresses" if "naddresses" > 0.
It looks like the other use of grub_net_dns_lookup() is not affected.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This avoids an underflow and subsequent unpleasantness.
Fixes: CVE-2022-28733
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A netbuff shouldn't be too huge. It's bounded by MTU and TCP segment
reassembly.
This helps avoid some bugs (and provides a spot to instrument to catch
them at their source).
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In some cases attempting to display arbitrary binary strings leads
to ASAN splats reading the widthspec array out of bounds.
Check the index. If it would be out of bounds, return a width of 1.
I don't know if that's strictly correct, but we're not really expecting
great display of arbitrary binary data, and it's certainly not worse than
an OOB read.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Certain 1 px wide images caused a wild pointer write in
grub_jpeg_ycrcb_to_rgb(). This was caused because in grub_jpeg_decode_data(),
we have the following loop:
for (; data->r1 < nr1 && (!data->dri || rst);
data->r1++, data->bitmap_ptr += (vb * data->image_width - hb * nc1) * 3)
We did not check if vb * width >= hb * nc1.
On a 64-bit platform, if that turns out to be negative, it will underflow,
be interpreted as unsigned 64-bit, then be added to the 64-bit pointer, so
we see data->bitmap_ptr jump, e.g.:
0x6180_0000_0480 to
0x6181_0000_0498
^
~--- carry has occurred and this pointer is now far away from
any object.
On a 32-bit platform, it will decrement the pointer, creating a pointer
that won't crash but will overwrite random data.
Catch the underflow and error out.
Fixes: CVE-2021-3697
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
An invalid file could contain multiple start of stream blocks, which
would cause us to reallocate and leak our bitmap. Refuse to handle
multiple start of streams.
Additionally, fix a grub_error() call formatting.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Fix a memory leak where an invalid file could cause us to reallocate
memory for a huffman table we had already allocated memory for.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Fuzzing revealed some inputs that were taking a long time, potentially
forever, because they did not bail quickly upon encountering an I/O error.
Try to catch I/O errors sooner and bail out.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
ASAN picked up two OOB global reads: we weren't checking if some code
values fit within the cplens or cpdext arrays. Check and throw an error
if not.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In fuzzing we observed crashes where a code would attempt to be inserted
into a huffman table before the start, leading to a set of heap OOB reads
and writes as table entries with negative indices were shifted around and
the new code written in.
Catch the case where we would underflow the array and bail.
Fixes: CVE-2021-3696
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A 16-bit greyscale PNG without alpha is processed in the following loop:
for (i = 0; i < (data->image_width * data->image_height);
i++, d1 += 4, d2 += 2)
{
d1[R3] = d2[1];
d1[G3] = d2[1];
d1[B3] = d2[1];
}
The increment of d1 is wrong. d1 is incremented by 4 bytes per iteration,
but there are only 3 bytes allocated for storage. This means that image
data will overwrite somewhat-attacker-controlled parts of memory - 3 bytes
out of every 4 following the end of the image.
This has existed since greyscale support was added in 2013 in commit
3ccf16dff9 (grub-core/video/readers/png.c: Support grayscale).
Saving starfield.png as a 16-bit greyscale image without alpha in the gimp
and attempting to load it causes grub-emu to crash - I don't think this code
has ever worked.
Delete all PNG greyscale support.
Fixes: CVE-2021-3695
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This causes the bitmap to be leaked. Do not permit multiple image headers.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Fuzzing revealed some inputs that were taking a long time, potentially
forever, because they did not bail quickly upon encountering an I/O error.
Try to catch I/O errors sooner and bail out.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
If we have an error in grub_file_open() before we free device_name, we
will leak it.
Free device_name in the error path and null out the pointer in the good
path once we free it there.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
We must not allow other verifiers to pass things like the GRUB modules.
Instead of maintaining a blocklist, maintain an allowlist of things
that we do not care about.
This allowlist really should be made reusable, and shared by the
lockdown verifier, but this is the minimal patch addressing
security concerns where the TPM verifier was able to mark modules
as verified (or the OpenPGP verifier for that matter), when it
should not do so on shim-powered secure boot systems.
Fixes: CVE-2022-28735
Signed-off-by: Julian Andres Klode <julian.klode@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This ports the EFI chainloader to use grub_loader_set_ex() in order to fix
a use-after-free bug that occurs when grub_cmd_chainloader() is executed
more than once before a boot attempt is performed.
Fixes: CVE-2022-28736
Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Loaders rely on global variables for saving context which is consumed
in the boot hook and freed in the unload hook. In the case where a loader
command is executed twice, calling grub_loader_set a second time executes
the unload hook, but in some cases this runs when the loader's global
context has already been updated, resulting in the updated context being
freed and potential use-after-free bugs when the boot hook is subsequently
called.
This adds a new API (grub_loader_set_ex) which allows a loader to specify
context that is passed to its boot and unload hooks. This is an alternative
to requiring that loaders call grub_loader_unset before mutating their
global context.
Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
(cherry picked from commit 4322a64dde7e8fedb58e50b79408667129d45dd3)
The chainloader command retains the source buffer and device path passed
to LoadImage(), requiring the unload hook passed to grub_loader_set() to
free them. It isn't required to retain this state though - they aren't
required by StartImage() or anything else in the boot hook, so clean them
up before grub_cmd_chainloader() finishes.
Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
