In this case, we need both the signed shim as /EFI/BOOT/BOOTXXX.EFI
and signed Grub as /EFI/BOOT/grubXXX.efi.
Also install the BOOTXXX.CSV into /EFI/debian, and FBXXX.EFI into
/EFI/BOOT/ so that it can work when needed (*iff* we're updating the
NVRAM).
[cjwatson: Refactored also_install_removable somewhat for brevity and so
that we're using consistent case-insensitive logic.]
Bug-Debian: https://bugs.debian.org/930531
Last-Update: 2021-09-24
Patch-Name: grub-install-removable-shim.patch
Some UEFI firmware is easily provoked into running out of space in its
variable storage. This is usually due to certain kernel drivers (e.g.
pstore), but regardless of the cause it can cause grub-install to fail
because it currently asks efibootmgr to delete and re-add entries, and
the deletion often doesn't result in an immediate garbage collection.
Writing variables frequently also increases wear on the NVRAM which may
have limited write cycles. For these reasons, it's desirable to find a
way to minimise writes while still allowing grub-install to ensure that
a suitable boot entry exists.
Unfortunately, efibootmgr doesn't offer an interface that would let
grub-install do this. It doesn't in general make very much effort to
minimise writes; it doesn't allow modifying an existing Boot* variable
entry, except in certain limited ways; and current versions don't have a
way to export the expected variable data so that grub-install can
compare it to the current data. While it would be possible (and perhaps
desirable?) to add at least some of this to efibootmgr, that would still
leave the problem that there isn't a good upstreamable way for
grub-install to guarantee that it has a new enough version of
efibootmgr. In any case, it's cumbersome and slow for grub-install to
have to fork efibootmgr to get things done.
Fortunately, a few years ago Peter Jones helpfully factored out a
substantial part of efibootmgr to the efivar and efiboot libraries, and
so it's now possible to have grub-install use those directly. We still
have to use some code from efibootmgr, but much less than would
previously have been necessary.
grub-install now reuses existing boot entries where possible, and avoids
writing to variables when the new contents are the same as the old
contents. In the common upgrade case where nothing needs to change, it
no longer writes to NVRAM at all. It's also now slightly faster, since
using libefivar is faster than forking efibootmgr.
Fixes Debian bug #891434.
Signed-off-by: Colin Watson <cjwatson@ubuntu.com>
Bug-Debian: https://bugs.debian.org/891434
Forwarded: https://lists.gnu.org/archive/html/grub-devel/2019-03/msg00119.html
Last-Update: 2019-03-23
Patch-Name: efi-variable-storage-minimise-writes.patch
On full-encrypted systems, including /boot, the current code omits
cryptodisk commands needed to open the drives if Secure Boot is enabled.
This prevents grub2 from reading any further configuration residing on
the encrypted disk.
This patch fixes this issue by adding the needed "cryptomount" commands in
the load.cfg file that is then copied in the EFI partition.
Bug-Debian: https://bugs.debian.org/917117
Last-Update: 2019-02-10
Patch-Name: uefi-secure-boot-cryptomount.patch
Add an extra option to grub-install "--force-extra-removable". On EFI
platforms, this will cause an extra copy of the grub-efi image to be
written to the appropriate removable media patch
/boot/efi/EFI/BOOT/BOOT$ARCH.EFI as well. This will help with broken
UEFI implementations where the firmware does not work when configured
with new boot paths.
Signed-off-by: Steve McIntyre <93sam@debian.org>
Bug-Debian: https://bugs.debian.org/767037https://bugs.debian.org/773092
Forwarded: Not yet
Last-Update: 2021-09-24
Patch-Name: grub-install-extra-removable.patch
Some powerpc machines require not updating the NVRAM. This can be handled
by existing grub-install command-line options, but it's friendlier to detect
this automatically.
On chrp_ibm machines, use the nvram utility rather than nvsetenv. (This
is possibly suitable for other machines too, but that needs to be
verified.)
Forwarded: no
Last-Update: 2014-10-15
Patch-Name: install-powerpc-machtypes.patch
This is not a very good approach, and certainly not sanely upstreamable;
we probably need to split GRUB_DISTRIBUTOR into a couple of different
variables.
Bug-Ubuntu: https://bugs.launchpad.net/bugs/1242417
Bug-Debian: https://bugs.debian.org/932966
Forwarded: not-needed
Last-Update: 2019-08-06
Patch-Name: install-efi-adjust-distributor.patch
Refactor clean_grub_dir() to create a backup of all the files, instead
of just irrevocably removing them as the first action. If available,
register atexit() handler to restore the backup if errors occur before
point of no return, or remove the backup if everything was successful.
If atexit() is not available, the backup remains on disk for manual
recovery.
Some platforms defined a point of no return, i.e. after modules & core
images were updated. Failures from any commands after that stage are
ignored, and backup is cleaned up. For example, on EFI platforms update
is not reverted when efibootmgr fails.
Extra care is taken to ensure atexit() handler is only invoked by the
parent process and not any children forks. Some older GRUB codebases
can invoke parent atexit() hooks from forks, which can mess up the
backup.
This allows safer upgrades of MBR & modules, such that
modules/images/fonts/translations are consistent with MBR in case of
errors. For example accidental grub-install /dev/non-existent-disk
currently clobbers and upgrades modules in /boot/grub, despite not
actually updating any MBR.
This patch only handles backup and restore of files copied to /boot/grub.
This patch does not perform backup (or restoration) of MBR itself or
blocklists. Thus when installing i386-pc platform, corruption may still
occur with MBR and blocklists which will not be attempted to be
automatically recovered.
Also add modinfo.sh and *.efi to the cleanup/backup/restore code path,
to ensure it is also cleaned, backed up and restored.
Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Two grub_device_open() calls does not have associated NULL checks
for returned values. Fix that and appease the Coverity.
Fixes: CID 314583
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
The function grub_disk_get_size() is confusingly named because it actually
returns a sector count where the sectors are sized in the GRUB native sector
size. Rename to something more appropriate.
Suggested-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
We don't want to support small MBR gap in pair with anything but the
simplest config of biosdisk + part_msdos + simple filesystem. In this
path "simple filesystems" are all current filesystems except ZFS and
Btrfs.
Signed-off-by: Vladimir Serbinenko <phcoder@google.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This modifies most of the places we do some form of:
X = malloc(Y * Z);
to use calloc(Y, Z) instead.
Among other issues, this fixes:
- allocation of integer overflow in grub_png_decode_image_header()
reported by Chris Coulson,
- allocation of integer overflow in luks_recover_key()
reported by Chris Coulson,
- allocation of integer overflow in grub_lvm_detect()
reported by Chris Coulson.
Fixes: CVE-2020-14308
Signed-off-by: Peter Jones <pjones@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Much like on x86, we can work out if the system is running on top of EFI
firmware. If so, return "arm-efi". If not, fall back to "arm-uboot" as
previously.
Split out the code to (maybe) load the efivar module and check for
/sys/firmware/efi into a common helper routine is_efi_system().
Signed-off-by: Steve McIntyre <93sam@debian.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This reverts commit 082fd84d52.
Incorrect version of the patch was pushed into the git repo.
Reported-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Much like on x86, we can work out if the system is running on top
of EFI firmware. If so, return "arm-efi". If not, fall back to
"arm-uboot" as previously.
Heavily inspired by the existing code for x86.
Signed-off-by: Steve McIntyre <93sam@debian.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch adds support for RISC-V to the grub build system. With this
patch, I can successfully build grub on RISC-V as a UEFI application.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add xen_pvh support to grub-install.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
Rename grub_gpt_part_type to grub_gpt_part_guid and update grub_gpt_partentry
to use this type for both the partition type GUID string and the partition GUID
string entries. This change ensures that the two GUID fields are handled more
consistently and helps to simplify the changes needed to add Linux partition
GUID support.
Signed-off-by: Nicholas Vinson <nvinson234@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Code is currently ignoring errors from efibootmgr, giving users
clearly bogus output like:
Setting up grub-efi-amd64 (2.02~beta3-4) ...
Installing for x86_64-efi platform.
Could not delete variable: No space left on device
Could not prepare Boot variable: No space left on device
Installation finished. No error reported.
and then potentially unbootable systems. If efibootmgr fails, grub-install
should know that and report it!
We've been using similar patch in Debian now for some time, with no ill effects.
Signed-off-by: Steve McIntyre <93sam@debian.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In util/getroot and efidisk slightly modify exitsing comment to mostly
retain it but still make GCC7 compliant with respect to fall through
annotation.
In grub-core/lib/xzembed/xz_dec_lzma2.c it adds same comments as
upstream.
In grub-core/tests/setjmp_tets.c declare functions as "noreturn" to
suppress GCC7 warning.
In grub-core/gnulib/regexec.c use new __attribute__, because existing
annotation is not recognized by GCC7 parser (which requires that comment
immediately precedes case statement).
Otherwise add FALLTHROUGH comment.
Closes: 50598
Incorrect drive name was being passed into grub_util_sparc_setup,
causing the grub-install to fail.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
canonicalize_file_name clashed with gnulib function. Additionally
it was declared in 2 places: emu/misc.h and util/misc.h. Added
grub_ prefix and removed second declaration.
Commit 588744d0dc caused grub-mkconfig
no longer to be forgiving of trailing spaces on grub-probe output
lines, which among other things means that util/grub.d/10_linux.in
no longer detects LVM. To fix this, make grub-probe's output
delimiting more consistent. As a bonus, this improves the coverage
of the -0 option.
Fixes Debian bug #735935.
* grub-core/disk/cryptodisk.c
(grub_util_cryptodisk_get_abstraction): Add a user-data argument.
* grub-core/disk/diskfilter.c (grub_diskfilter_get_partmap):
Likewise.
* include/grub/cryptodisk.h (grub_util_cryptodisk_get_abstraction):
Update prototype.
* include/grub/diskfilter.h (grub_diskfilter_get_partmap): Likewise.
* util/grub-install.c (push_partmap_module, push_cryptodisk_module,
probe_mods): Adjust for extra user-data arguments.
* util/grub-probe.c (do_print, probe_partmap, probe_cryptodisk_uuid,
probe_abstraction): Use configured delimiter. Update callers.
According to UEFI 2.4 specification, default boot file name on AArch64
is BOOTAA64.EFI (3.4.1.1 Removable Media Boot Behavior). Also set default
GRUB image name to grubaa64.efi to match it.
