proxmox-mirrors/fwupd
1
0
Fork 0
mirror of https://git.proxmox.com/git/fwupd synced 2025-06-04 08:05:02 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
efa55b83a7
fwupd/plugins/unifying
History
Richard Hughes 7ceb318a27 Add fwupd_result_get_device_version_bootloader() 
This functionality is required so that AppStream metadata can check the fwupd
version, the firmware version, bootloader version or a combination of all three.
2016-12-23 11:21:22 +00:00
..
data Add support for Logitech Unifying devices 2016-12-12 15:36:53 +00:00
fu-plugin-unifying.c Add fwupd_result_get_device_version_bootloader() 2016-12-23 11:21:22 +00:00
Makefile.am Add support for Logitech Unifying devices 2016-12-12 15:36:53 +00:00
README.md Add support for Logitech Unifying devices 2016-12-12 15:36:53 +00:00
unifying-dongle.c unifying: Use the actual bootloader VID/PIDs when in firmware mode 2016-12-16 21:24:55 +00:00
unifying-dongle.h Add support for Logitech Unifying devices 2016-12-12 15:36:53 +00:00
unifying-tool.c Add support for Logitech Unifying devices 2016-12-12 15:36:53 +00:00

README.md

Unifying Support

Introduction

This plugin can flash the firmware on Logitech Unifying dongles, both the Nordic (U0007) device and the Texas Instruments (U0008) version.

This plugin will not work with the different "Nano" dongle (U0010) as it does not use the Unifying protocol.

The bootloader protocol infomation was taken from the Mousejack[1] project, specifically logitech-usb-restore.py and unifying.py.

Additional constants were taken from the Solaar[2] project.

Verification

If you do not have Unifying hardware you can emulate writing firmware using:

fu-unifying-tool write file.hex -v --emulate=bootloader-nordic

This can also be used to produce protocol data to the command line to compare against USB dumps. This plugin should interact with the hardware exactly like the Logitech-provided flashing tool, although only a few devices have been tested.

[1] https://www.mousejack.com/ [2] https://pwr.github.io/Solaar/