proxmox-mirrors/fwupd
1
0
Fork 0
mirror of https://git.proxmox.com/git/fwupd synced 2025-07-24 19:26:48 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
7b2d75f94d
fwupd/plugins/goodix-moc
History
Richard Hughes 40cd18fa97 Allow using a per-device global percentage completion 
It's actually quite hard to build a front-end for fwupd at the moment
as you're never sure when the progress bar is going to zip back to 0%
and start all over again. Some plugins go 0..100% for write, others
go 0..100% for erase, then again for write, then *again* for verify.

By creating a helper object we can easily split up the progress of the
specific task, e.g. write_firmware().

We can encode at the plugin level "the erase takes 50% of the time, the
write takes 40% and the read takes 10%". This means we can have a
progressbar which goes up just once at a consistent speed.
2021-09-13 14:28:15 +01:00
..
fu-goodixmoc-common.h trivial: reformat the whole tree to match new format 2021-08-24 11:18:40 -05:00
fu-goodixmoc-device.c Allow using a per-device global percentage completion 2021-09-13 14:28:15 +01:00
fu-goodixmoc-device.h trivial: reformat the whole tree to match new format 2021-08-24 11:18:40 -05:00
fu-plugin-goodixmoc.c trivial: reformat the whole tree to match new format 2021-08-24 11:18:40 -05:00
goodixmoc.quirk Simplify the quirk file format 2021-03-03 08:30:34 +00:00
meson.build Move the plugin build logic to the plugins themselves 2021-02-18 14:46:20 +00:00
README.md trivial: update markdown for pre-commit style 2021-07-18 14:42:47 -05:00

README.md

Goodix Fingerprint Sensor

Introduction

The plugin used for update firmware for fingerprint sensors from Goodix.

Firmware Format

The daemon will decompress the cabinet archive and extract a firmware blob in a packed binary file format.

This plugin supports the following protocol ID:

  • com.goodix.goodixmoc

GUID Generation

These devices use the standard USB DeviceInstanceId values, e.g.

  • USB\VID_27C6&PID_6001&REV_0001
  • USB\VID_27C6&PID_6001
  • USB\VID_27C6

Update Behavior

The firmware is deployed when the device is in normal runtime mode, and the device will reset when the new firmware has been written.

Vendor ID Security

The vendor ID is set from the USB vendor, in this instance set to USB:0x27C6

External Interface Access

This plugin requires read/write access to /dev/bus/usb.