fwupd/plugins/dfu-csr
Richard Hughes 0415db6f67 Revert "trivial: Use files() rather than current_source_dir()"
This reverts commit b581fa5670 as it breaks
`ninja dist` with `-Dgresource_quirks=enabled`.
2022-09-25 10:31:14 +01:00
..
data csr: Rename plugin to dfu-csr as it depends on the prefixed plugin 2021-02-18 14:46:20 +00:00
dfu-csr.quirk Simplify the quirk file format 2021-03-03 08:30:34 +00:00
fu-dfu-csr-device.c dfu-csr: Fix uploading to devices 2022-09-09 19:23:29 +01:00
fu-dfu-csr-device.h trivial: reformat the whole tree to match new format 2021-08-24 11:18:40 -05:00
fu-plugin-dfu-csr.c Speed up the daemon startup by ~2% by doing dlsym much less 2021-11-09 12:02:07 +00:00
meson.build Revert "trivial: Use files() rather than current_source_dir()" 2022-09-25 10:31:14 +01:00
README.md trivial: update markdown for pre-commit style 2021-07-18 14:42:47 -05:00

DFU CSR

Introduction

CSR is often called “driverless DFU” and is used only by BlueCore chips from Cambridge Silicon Radio (now owned by Qualcomm). The driverless just means that it's DFU like, and is routed over HID.

CSR is a ODM that makes most of the Bluetooth audio chips in vendor hardware. The hardware vendor can enable or disable features on the CSR microcontroller depending on licensing options (for instance echo cancellation), and theres even a little virtual machine to do simple vendor-specific things.

All the CSR chips are updatable in-field, and most vendors issue updates to fix sound quality issues or to add support for new protocols or devices.

Firmware Format

The daemon will decompress the cabinet archive and extract a firmware blob in DFU file format.

This plugin supports the following protocol ID:

  • com.qualcomm.dfu

GUID Generation

These devices use the standard USB DeviceInstanceId values, e.g.

  • USB\VID_0A12&PID_1337&REV_2520
  • USB\VID_0A12&PID_1337
  • USB\VID_0A12

Update Behavior

A DFU device usually presents in runtime mode (or with no interfaces defined), but if the user puts the device into bootloader mode using a physical button it then enumerates with a HID descriptor. On attach the device returns to runtime mode which may mean the device "goes away".

For this reason the REPLUG_MATCH_GUID internal device flag is used so that the bootloader and runtime modes are treated as the same device.

Vendor ID Security

The vendor ID is set from the USB vendor, in this instance set to USB:0x0A12

External Interface Access

This plugin requires read/write access to /dev/bus/usb.