Version 1.0.3 ~~~~~~~~~~~~~ Released: 2017-01-09 New Features: - Add a new plugin to add support for CSR "Driverless DFU" (Richard Hughes) - Add initial SF30/SN30 Pro support (Mario Limonciello) - Support AppStream metadata with relative URLs (Richard Hughes) Bugfixes: - Add more metadata to the user-agent string (Richard Hughes) - Block owned Dell TPM updates (Mario Limonciello) - Choose the correct component from provides matches using requirements (Richard Hughes) - Do not try to parse huge compressed archive files (Richard Hughes) - Fix a double-free bug in the Udev code (Philip Withnall) - Handle Thunderbolt "native" mode (Yehezkel Bernat) - Use the new functionality in libgcab >= 1.0 to avoid writing temp files (Richard Hughes) Version 1.0.2 ~~~~~~~~~~~~~ Released: 2017-11-28 New Features: - Add a plugin for the Nitrokey Storage device (Richard Hughes) - Add support for the original AVR DFU protocol (Richard Hughes) - Allow different plugins to claim the same device (Richard Hughes) - Allow quirks to set common USB properties (Richard Hughes) - Move a common plugin functionality out to a new shared object (Richard Hughes) - Optionally delay the device removal for better replugging (Richard Hughes) - Set environment variables to allow easy per-plugin debugging (Richard Hughes) - Use a SHA1 hash for the internal DeviceID (Richard Hughes) Bugfixes: - Add quirk for AT32UC3B1256 as used in the RubberDucky (Richard Hughes) - Disable the dell plugin if libsmbios fails (Mario Limonciello) - Don't register for USB UDev events to later ignore them (Richard Hughes) - Fix a possible buffer overflow when debugging ebitdo devices (Richard Hughes) - Fix critical warning when more than one remote fails to load (Richard Hughes) - Fix DFU attaching AVR32 devices like the XMEGA (Richard Hughes) - Ignore useless Thunderbolt device types (Mario Limonciello) - Refactor ColorHug into a much more modern plugin (Richard Hughes) - Release the Steelseries interface if getting the version failed (Richard Hughes) - Remove autoconf-isms from the meson configure options (Richard Hughes) - Show a nicer error message if the requirement fails (Richard Hughes) - Sort the output of GetUpgrades correctly (Richard Hughes) Version 1.0.1 ~~~~~~~~~~~~~ Released: 2017-11-09 New Features: - Add support for HWID requirements (Richard Hughes) - Add support for programming various AVR32 and XMEGA parts using DFU (Richard Hughes) - Add the various DFU quirks for the Jabra Speak devices (Richard Hughes) - Allow specifying the output file type for 'dfu-tool read' (Richard Hughes) - Move the database of supported devices out into runtime loaded files (Richard Hughes) - Support the IHEX record type 0x05 (Richard Hughes) - Use help2man to generate the man page at build time (Richard Hughes) - Use the new quirk infrastructure for version numbers (Richard Hughes) Bugfixes: - Catch invalid Dell dock component requests (Mario Limonciello) - Correctly output Intel HEX files with > 16bit offset addresses (Richard Hughes) - Do not try to verify the element write if upload is unsupported (Richard Hughes) - Fix a double-unref when updating any 8Bitdo device (Richard Hughes) - Fix crash when enumerating with Dell dock connected but with no UEFI (Mario Limonciello) - Fix uploading large firmware files over DFU (Richard Hughes) - Format the BCD USB revision numbers correctly (Richard Hughes) - Guess the DFU transfer size if it is not specified (Richard Hughes) - Include the reset timeout as wValue to fix some DFU bootloaders (Richard Hughes) - Make the error message clearer when sans fonts are missing (Mario Limonciello) - Support devices with truncated DFU interface data (Richard Hughes) - Use the correct remote-specified username and passord when using fwupdmgr (Richard Hughes) - Use the correct wDetachTimeOut when writing DFU firmware (Richard Hughes) - Verify devices with legacy VIDs are actually 8Bitdo controllers (Richard Hughes) Version 1.0.0 ~~~~~~~~~~~~~ Released: 2017-10-09 Notes: - This release breaks API and ABI to remove deprecated symbols - libdfu is now not installed as a shared library New Features: - Add a human-readable title for each remote (Richard Hughes) - Add a method to return a list of upgrades for a specific device (Richard Hughes) - Add an 'Summary' and 'Icons' properties to each device (Richard Hughes) - Add FuDeviceLocker to simplify device open/close lifecycles (Richard Hughes) - Add functionality to blacklist Dell HW with problems (Mario Limonciello) - Add fu_plugin_check_supported() (Richard Hughes) - Add fwupd_remote_get_checksum() to use in client programs (Richard Hughes) - Add ModifyRemote as an easy way to enable and disable remotes (Richard Hughes) - Add the plugin documentation to the main gtk-doc (Richard Hughes) - Allow plugins to depend on each other (Richard Hughes) - Disable the fallback USB plugin (Richard Hughes) - Parse the SMBIOS v2 and v3 DMI tables directly (Richard Hughes) - Support uploading the UEFI firmware splash image (Richard Hughes) - Use the intel-wmi-thunderbolt kernel module to force power (Mario Limonciello) Bugfixes: - Only run SMI to toggle host MST GPIO on Dell systems with host MST (Mario Limonciello) - Disable unifying support if no CONFIG_HIDRAW support (Richard Hughes) - Do not auto-open all USB devices at startup (Richard Hughes) - Do not fail to load the daemon if cached metadata is invalid (Richard Hughes) - Do not use system-specific infomation for UEFI PCI devices (Richard Hughes) - Fix a crash when using fu_plugin_device_add_delay() (Richard Hughes) - Fix the libdfu self test failure on s390 and ppc64 (Richard Hughes) - Fix various printing issues with the progressbar (Richard Hughes) - Generate the LD script from the GObject introspection data (Richard Hughes) - Never fallback to an offline update from client code (Richard Hughes) - Only set the Dell coldplug delay when we know we need it (Mario Limonciello) - Prefer to use HWIDs to get DMI keys and DE table (Mario Limonciello) Version 0.9.7 ~~~~~~~~~~~~~ Released: 2017-09-01 New Features: - Add a configure switch for the LVFS remotes (Richard Hughes) - Add a FirmwareBaseURI parameter to the remote config (Richard Hughes) - Add a firmware builder that uses bubblewrap (Richard Hughes) - Add a python script to create fwupd compatible cab files from Microsoft .exe files (Max Ehrlich) - Add a thunderbolt plugin for new kernel interface (Christian Kellner, Yehezkel Bernat) - Allow plugins to get DMI data from the hardware in a safe way (Richard Hughes) - Allow plugins to set metadata on devices created by other plugins (Richard Hughes, Mario Limonciello) - Optionally install the LVFS PKCS7 root certificate (Richard Hughes) - Optionally use GnuTLS to verify PKCS7 certificates (Richard Hughes) Bugfixes: - Add back options for HAVE_SYNAPTICS and HAVE_THUNDERBOLT (Mario Limonciello) - Allow configuring systemd and udev directories (Mario Limonciello) - Enable C99 support in meson.build (Philip Withnall) - Fix an incomplete cipher when using XTEA on data not in 4 byte chunks (Richard Hughes) - Fix minor const-correctness issues (Philip Withnall) - Implement thunderbolt image validation (Yehezkel Bernat, Christian Kellner) - Remove the confusing ALLOW_OFFLINE and ALLOW_ONLINE flags (Richard Hughes) - Show a bouncing progress bar if the percentage remains at zero (Richard Hughes) - Use a hwid to match supported systems for synapticsmst (Mario Limonciello) - Use the new bootloader PIDs for Unifying pico receivers (Richard Hughes) - When thunderbolt is in safe mode on a Dell recover using SMBIOS (Mario Limonciello) Version 0.9.6 ~~~~~~~~~~~~~ Released: 2017-08-03 New Features: - Add DfuPatch to support forward-only firmware patching (Richard Hughes) - Add --version option to fwupdmgr (Richard Hughes, Mario Limonciello) - Display all errors recorded by efi_error tracing (Mario Limonciello) - Make building introspection optional (Patrick Ohly) - Support embedded devices with local firmware metadata (Richard Hughes) Bugfixes: - Check all the device GUIDs against the blacklist when added (Richard Hughes) - Correct a memory leak in Dell plugin (Mario Limonciello, Richard Hughes) - Default to "en" for UEFI capsule graphics (Mario Limonciello) - Don't log a warning when an unknown unifying report is parsed (Richard Hughes) - Enable test suite via /etc/fwupd.conf (Mario Limonciello) - Fix a hang on 32 bit computers (Richard Hughes) - Fix compilation of the policy on a variety of configurations (Mario Limonciello) - Fix UEFI crash when the product name is NULL (Richard Hughes) - Make flashing ebitdo devices work with fu-ebitdo-tool (Chris Lee) - Make messages from installing capsules useful (Mario Limonciello) - Make sure the unifying percentage completion goes from 0% to 100% (Richard Hughes) - Run the plugin coldplug methods in a predictable order (Richard Hughes) - Test UEFI for kernel support during coldplug (Mario Limonciello) - Use new GUsb functionality to fix flashing Unifying devices (Richard Hughes) Version 0.9.5 ~~~~~~~~~~~~~ Released: 2017-07-04 New Features: - Add a get-remotes command to fwupdmgr (Richard Hughes) - Add a plugin to get the version of the AMT ME interface (Richard Hughes) - Add Arch Linux to CI (Bruno Pagani) - Add some installed tests flashing actual hardware (Richard Hughes) - Allow flashing Unifying devices in bootloader modes (Richard Hughes) - Allow ordering the metadata remotes (Richard Hughes) Bugfixes: - Do not check the runtime if the DFU device is in bootloader mode (Richard Hughes) - Do not unlock devices when doing VerifyUpdate (Richard Hughes) - Filter by Unifying SwId when making HID++2.0 requests (Richard Hughes) - Fix downgrades when version_lowest is set (Richard Hughes) - Fix the self tests when running on PPC64 big endian (Richard Hughes) - Move the remotes parsing from the client to the server (Richard Hughes) - Split up the Unifying HID++2.0 and HID++1.0 functionality (Richard Hughes) - Store the metadata files rather than merging to one store (Richard Hughes) - Use a longer timeout for some Unifying operations (Richard Hughes) - Use the UFY DeviceID prefix for Unifying devides (Richard Hughes) Version 0.9.4 ~~~~~~~~~~~~~ Released: 2017-06-15 New Features: - Add installed tests that use the daemon (Richard Hughes) - Add the ability to restrict firmware to specific vendors (Richard Hughes) - Enable Travis CI for Fedora and Debian (Richard Hughes, Mario Limonciello) - Export some more API for dealing with checksums (Richard Hughes) - Generate a images for status messages during system firmware update (Peter Jones) - Show progress download when refreshing metadata (Richard Hughes) Bugfixes: - Compile with newer versions of meson (Richard Hughes, Mario Limonciello) - Ensure that firmware provides are legal GUIDs (Richard Hughes) - Fix a common crash when refreshing metadata (Richard Hughes) - Use the correct type signature in the D-Bus introspection file (Richard Hughes) Version 0.9.3 ~~~~~~~~~~~~~ Released: 2017-06-07 New Features: - Add a 'downgrade' command to fwupdmgr (Richard Hughes) - Add a 'get-releases' command to fwupdmgr (Richard Hughes) - Add support for ConsoleKit2 (Eric Koegel) - Add support for Microsoft HardwareIDs (Richard Hughes) - Allow downloading metadata from more than just the LVFS (Richard Hughes) - Allow multiple checksums on devices and releases (Richard Hughes) Bugfixes: - Allow to specify bindir (Timo Gurr) - Correctly open Unifying devices with original factory firmware (Richard Hughes) - Deprecate some of the old FwupdResult API (Richard Hughes) - Do not copy the origin from the new metadata file (Richard Hughes) - Do not expect a Unifying reply when issuing a REBOOT command (Richard Hughes) - Do not re-download firmware that exists in the cache (Richard Hughes) - Fix a problem when testing for a Dell system (Mario Limonciello) - Fix flashing new firmware to 8bitdo controllers (Richard Hughes) - Increase minimum required AppStream-Glib version to 0.6.13 (Chris Mayo) - Make documentation and man pages optional (Chris Mayo) - Make systemd dependency at least version 231 (Mario Limonciello) - Only decompress the firmware after the signature check (Richard Hughes) - Remove 'lib' prefix when looking for libraries (Mirco Tischler) - Return the remote ID when getting updates about hardware (Richard Hughes) - Send the daemon the remote ID when sending firmware metadata (Richard Hughes) Version 0.9.2 ~~~~~~~~~~~~~ Released: 2017-05-22 New Features: - Add support for Unifying DFU features (Richard Hughes) Bugfixes: - Do not spew a critial warning when parsing an invalid URI (Richard Hughes) - Ensure device is closed if did not complete setup (Richard Hughes) - Ensure steelseries device is closed if it returns an invalid packet (Richard Hughes) - Fix man page installation location (Mario Limonciello) - Ignore spaces in the Unifying version prefix (Richard Hughes) - Set HAVE_POLKIT_0_114 when polkit is newer than 0.114 (Moritz Kiefer) Version 0.9.1 ~~~~~~~~~~~~~ Released: 2017-04-28 New Features: - Add a config option to allow runtime disabling plugins by name (Richard Hughes) - Add the Meson build system and remove autotools (Richard Hughes) - Support signed Intel HEX files (Richard Hughes) Bugfixes: - Add DFU quirk for OpenPICC and SIMtrace (Richard Hughes) - Create directories in /var/cache as required (Richard Hughes) - Refactor the unifying plugin now we know more about the hardware (Richard Hughes) - Set the source origin when saving metadata (Richard Hughes) - Support proxy servers in fwupdmgr (Richard Hughes) - Use a 60 second timeout on all client downloads (Richard Hughes) Version 0.8.1 ~~~~~~~~~~~~~ Released: 2017-02-27 Bugfixes: - Adjust systemd confinement restrictions (Mario Limonciello, Richard Hughes) - Do not hardcode docbook2man path (Kai Krakow) - Don't initialize libsmbios on unsupported systems (Mario Limonciello) - Fix a crash when enumerating devices on a Dell WLD15 (Richard Hughes) - Fix compiler warnings (Kai Krakow) - Fix fwupdmgr timeout with missing pending database (Richard Hughes) Version 0.8.0 ~~~~~~~~~~~~~ Released: 2017-02-08 New Features: - Add a set of vfuncs that are run before and after a device update (Richard Hughes) - Add Dell-specific functionality to allow other plugins turn on TBT/GPIO (Mario Limonciello) - Add support for Intel Thunderbolt devices (Richard Hughes, Mario Limonciello) - Add support for Logitech Unifying devices (Richard Hughes) - Add support for Synaptics MST cascades hubs (Mario Limonciello) - Add support for the Altus-Metrum ChaosKey device (Richard Hughes) - Add VerifyUpdate to update the device checksums server-side (Richard Hughes) - Allow the metadata to match a version of fwupd and the existing fw version (Richard Hughes) Bugfixes: - Add a new method for forcing a controller to flash mode (Mario Limonciello) - Always make sure we're getting a C99 compiler (Richard Hughes) - Close USB devices before error returns (Tsunghan Liu) - Don't read data from some DfuSe targets (Richard Hughes) - Include all debug messages when run with --verbose (Richard Hughes) - Return the pending UEFI update when not on AC power (Richard Hughes) - Use a heuristic for the start address if the firmware has no DfuSe footer (Richard Hughes) - Use more restrictive settings when running under systemd (Richard Hughes, Mario Limonciello) Version 0.7.5 ~~~~~~~~~~~~~ Released: 2016-10-19 New Features: - Add a 'replace-data' command to dfu-tool (Richard Hughes) - Use an animated progress bar when performing DFU operations (Richard Hughes) Bugfixes: - Add quirks for HydraBus as it does not have a DFU runtime (Richard Hughes) - Don't create the UEFI dummy device if the unlock will happen on next boot (Richard Hughes) - Enable hardening flags on more binaries (Mario Limonciello) - Fix an assert when unlocking the dummy ESRT device (Richard Hughes) - Fix writing firmware to devices using the ST reference bootloader (Richard Hughes) - Match the Dell TB16 device (Mario Limonciello) - Re-get the quirks when the DfuDevice gets a new GUsbDevice (Richard Hughes) - Show the nicely formatted target name for DfuSe devices (Richard Hughes) - Verify devices support updating in mode they are called (Mario Limonciello) Version 0.7.4 ~~~~~~~~~~~~~ Released: 2016-09-19 New Features: - Add dfu_firmware_add_symbol() (Richard Hughes) - Allow the argument to 'dfu-tool set-release' be major.minor (Richard Hughes) - Load the Altos USB descriptor from ELF files (Richard Hughes) - Support writing the IHEX symbol table (Richard Hughes) Bugfixes: - Add a fallback for older appstream-glib releases (Richard Hughes) - Fix a possible crash when uploading firmware files using libdfu (Richard Hughes) - Fix libfwupd self tests when a host-provided fwupd is not available (Richard Hughes) - Show the human-readable version in the 'dfu-tool dump' output (Richard Hughes) - Write the ELF files with the correct section type (Richard Hughes) Version 0.7.3 ~~~~~~~~~~~~~ Released: 2016-08-29 New Features: - Add a set-address and set-target-size commands to dfu-util (Richard Hughes) - Add a small library for talking with 0bitdo hardware (Richard Hughes) - Add Dell TPM and TB15/WD15 support via new Dell provider (Mario Limonciello) - Add FU_DEVICE_FLAG_NEEDS_BOOTLOADER (Richard Hughes) - Add fwupd_client_get_status() (Richard Hughes) - Add fwupd_result_get_unique_id() (Richard Hughes) - Add initial ELF reading and writing support to libdfu (Richard Hughes) - Add support for installing multiple devices from a CAB file (Richard Hughes) - Allow providers to export percentage completion (Richard Hughes) - Show a progress notification when installing firmware (Richard Hughes) - Show the vendor flashing instructions when installing (Richard Hughes) Bugfixes: - Add XPS 9250 to Dell TPM modeswitch blacklist (Mario Limonciello) - Allow blacklisting devices by their GUID (Richard Hughes) - Conditionally enable all providers based upon installed (Mario Limonciello) - Display flashes left in results output when it gets low (Mario Limonciello) - Do not attempt to add DFU devices not in runtime mode (Richard Hughes) - Do not use the deprecated GNOME_COMPILE_WARNINGS (Richard Hughes) - Don't fail while checking versions or locked state (Richard Hughes) - Embed fwupd version in generated documentation (Mario Limonciello) - Ensure the ID is set when getting local firmware details (Richard Hughes) - Fix gtk-doc build when srcdir != builddir (Ting-Wei Lan) - Fix libdfu hang when parsing corrupt IHEX files (Richard Hughes) - Ignore devices that do not add at least one GUID (Richard Hughes) - In get-details output, display the blob filename (Mario Limonciello) - Save the unique ID in the pending database (Richard Hughes) - Support the 'DEVO' cipher kind in libdfu (Richard Hughes) - Switch to the Amazon S3 CDN for firmware metadata (Richard Hughes) - Update fwupdmgr manpage for new commands and arguments (Mario Limonciello) - Use a private gnupg key store (Richard Hughes) - Use the correct firmware when installing a composite device (Richard Hughes) - Use the SHA1 hash of the local file data as the origin (Richard Hughes) Version 0.7.2 ~~~~~~~~~~~~~ Released: 2016-06-13 New Features: - Add a GetDetailsLocal() method to eventually replace GetDetails() (Richard Hughes) - Add fu_device_get_alternate() (Richard Hughes) - Allow devices to have multiple assigned GUIDs (Richard Hughes) - Allow metainfo files to match only specific revisions of devices (Richard Hughes) - Show the DFU protocol version in 'dfu-tool list' (Richard Hughes) Bugfixes: - Enforce allowing providers to take away flash abilities (Mario Limonciello) - Only claim the DFU interface when required (Richard Hughes) - Only return updatable devices from GetDevices() (Richard Hughes) Version 0.7.1 ~~~~~~~~~~~~~ Released: 2016-05-13 New Features: - Add a --force flag to override provider warnings (Mario Limonciello) - Add device-added, device-removed and device-changed signals (Richard Hughes) - Add dfu_image_get_element_default() (Richard Hughes) - Add for a new device field "Flashes Left" (Mario Limonciello) - Add fwupd_client_connect() (Richard Hughes) - Add the 'monitor' debugging command for fwupdmgr (Richard Hughes) - Add the 'supported' flag to the FuDevice (Richard Hughes) Bugfixes: - Add summary and name field for Rival SteelSeries (Mario Limonciello) - Fix a critical warning when restarting the daemon (Richard Hughes) - Fix BE issues when reading and writing DFU files (Mario Limonciello, Richard Hughes) - Make the device display name nicer (Richard Hughes, Richard Hughes) - Match the AppStream metadata after a device has been added (Richard Hughes) - Remove non-interactive pinentry setting from fu-keyring (Mario Limonciello) - Return all update descriptions newer than the installed version (Richard Hughes) - Set the device description when parsing local firmware files (Richard Hughes) Version 0.7.0 ~~~~~~~~~~~~~ Released: 2016-04-01 New Features: - Add a version plugin for SteelSeries hardware (Richard Hughes) - Add FwupdClient and FwupdResult to libfwupd (Richard Hughes) - Generate gtk-doc documentation for libfwupd (Richard Hughes) - Return the device flags when getting firmware details (Richard Hughes) - Support other checksum kinds (Richard Hughes) Bugfixes: - Add Alienware to the version quirk table (Mario Limonciello) - Allow the test suite to run in %check (Richard Hughes) - Do not return updates that require AC when on battery (Richard Hughes) - Do not use /tmp for downloaded files (Richard Hughes) - Test that GPG key import actually was successful (Mario Limonciello) Version 0.6.3 ~~~~~~~~~~~~~ Released: 2016-03-14 New Features: - Add an unlock method for devices (Richard Hughes) - Add a simple plugin infrastructure (Richard Hughes) - Add ESRT enable method into UEFI provider (Mario Limonciello) - Install the hardcoded firmware AppStream file (Richard Hughes) Bugfixes: - Correct the BCD version number for DFU 1.1 (Richard Hughes) - Do not use deprecated API from libappstream-glib (Richard Hughes) - Ignore the DFU runtime on the DW1820A (Richard Hughes) - Only read PCI OptionROM firmware when devices are manually unlocked (Richard Hughes) - Require AC power before scheduling some types of firmware update (Richard Hughes) - Show ignored DFU devices in dfu-util, but not in fwupd (Richard Hughes) Version 0.6.2 ~~~~~~~~~~~~~ Released: 2016-02-12 New Features: - Add 'Created' and 'Modified' properties on managed devices (Richard Hughes) Bugfixes: - Fix get-results for UEFI provider (Mario Limonciello) - Support vendor-specific UEFI version encodings (Richard Hughes) Version 0.6.1 ~~~~~~~~~~~~~ Released: 2016-01-19 Bugfixes: - Always persist ColorHug devices after replug (Richard Hughes) - Do not misdetect different ColorHug devices (Richard Hughes) - Only dump the profiling data when run with --verbose (Richard Hughes) Version 0.6.0 ~~~~~~~~~~~~~ Released: 2015-12-07 Notes: - This release adds a new GObject library called libdfu and a command line client called dfu-tool. This is a low-level tool used to upgrade USB device firmware and can either be shipped in the same package as fwupd or split off as separate subpackages. New Features: - Add support for automatically updating USB DFU-capable devices (Richard Hughes) Bugfixes: - Emit the changed signal after doing an update (Richard Hughes) - Export the AppStream ID when returning device results (Richard Hughes) - Fix compile with --disable-shared (Richard Hughes) - Use new API available in fwup 0.5 (Richard Hughes, Mario Limonciello) - Use the same device identification string format as Microsoft (Richard Hughes) Version 0.5.3 ~~~~~~~~~~~~~ Released: 2015-11-05 Bugfixes: - Avoid seeking when reading the file magic during refresh (Richard Hughes) - Do not assume that the compressed XML data will be NUL terminated (Richard Hughes) - Use the correct user agent string for fwupdmgr (Richard Hughes) Version 0.5.2 ~~~~~~~~~~~~~ Released: 2015-10-28 New Features: - Add profiling data to debug slow startup times (Richard Hughes) - Support cabinet archives files with more than one firmware (Richard Hughes) Bugfixes: - Add the update description to the GetDetails results (Richard Hughes) - Clear the in-memory firmware store only after parsing a valid XML file (Richard Hughes) - Ensure D-Bus remote errors are registered at fwupdmgr startup (Richard Hughes) - Fix verify-update to produce components with the correct provide values (Richard Hughes) - Require appstream-glib 0.5.1 (Mirco Tischler) - Show the dotted-decimal representation of the UEFI version number (Richard Hughes) - When the version is from the 'FW' extension do not cache the device (Richard Hughes) Version 0.5.1 ~~~~~~~~~~~~~ Released: 2015-09-21 Bugfixes: - Fix the error message when no devices can be updated (Richard Hughes) - Fix reading symlink to prevent crash with some compilers (Kalev Lember) Version 0.5.0 ~~~~~~~~~~~~~ Released: 2015-09-15 New Features: - Raise the dep on GLib to support and use g_autoptr() (Richard Hughes) Bugfixes: - Do not merge existing firmware metadata (Richard Hughes) - Do not reboot if racing with the PackageKit offline update mechanism (Richard Hughes) Version 0.1.6 ~~~~~~~~~~~~~ Released: 2015-09-10 New Features: - Remove fwsignd, we have the LVFS now (Richard Hughes) Bugfixes: - Add application metadata when getting the updates list (Richard Hughes) - Depend on appstream-glib >= 0.5.0 (Richard Hughes) - Don't apply firmware if something else is processing the update (Richard Hughes) - Install fwupd into /usr/lib/$(triplet)/fwupd instead (Mario Limonciello) - Simplify the version properties on devices to avoid complexity (Richard Hughes) - Update the offline update service to invoke right command (Kalev Lember) - Use the new secure metadata URI (Richard Hughes) Version 0.1.5 ~~~~~~~~~~~~~ Released: 2015-08-12 Notes: - For the device verification code to work correctly you need at least libappstream-glib 0.5.0 installed. New Features: - Add a Raspberry Pi firmware provider (Richard Hughes) - Add a simple config file to store the correct LVFS download URI (Richard Hughes) - Make parsing the option ROM runtime optional (Richard Hughes) Bugfixes: - Allow fwupd to be autostarted by systemd (Richard Hughes) - Allow no arguments to 'fwupdmgr verify-update' and use sane defaults (Richard Hughes) - Devices with option ROM are always internal (Richard Hughes) - Do not pre-convert the update description from AppStream XML (Richard Hughes) - Fix validation of written firmware (Richard Hughes) - Move the verification and metadata matching phase to the daemon (Richard Hughes) - Sign the test binary with the correct key (Richard Hughes) - Use the AppStream 0.9 firmware specification by default (Richard Hughes) Version 0.1.4 ~~~~~~~~~~~~~ Released: 2015-07-25 Notes: - In this release we've moved the LVFS website to the fwupd project and made them work really well together. To update all the firmware on your system is now just a case of "fwupdmgr refresh && fwupdmgr update" - We've also added verification of BIOS and PCI ROM firmware, which may be useful for forensics or to verify that system updates have been applied. New Features: - Actually parse the complete PCI option ROM (Richard Hughes) - Add a 'fwupdmgr update' command to update all devices to latest versions (Richard Hughes) - Add a simple signing server that operates on .cab files (Richard Hughes) - Add a 'verify' command that verifies the cryptographic hash of device firmware (Richard Hughes) - Allow clients to add new firmware metadata to the system cache (Richard Hughes) - Move GetUpdates to the daemon (Richard Hughes) - Move the LVFS website to the fwupd project (Richard Hughes) Bugfixes: - Accept multiple files at one time when using fwupdmgr dump-rom (Richard Hughes) - Automatically download metadata using fwupdmgr if required (Richard Hughes) - Do not return NULL as a gboolean (Thomas Hindoe Paaboel Andersen) - Don't call efibootmgr after fwupdate (Mario Limonciello) - Fallback to offline install when calling the update argument (Mario Limonciello) - Fix Intel VBIOS detection on Dell hardware (Richard Hughes) - Reload appstream data after refreshing (Mario Limonciello) - Use the new LVFS GPG key (Richard Hughes) - Fix build: libgusb is required even without colorhug support (Jussi Kukkonen) Version 0.1.3 ~~~~~~~~~~~~~ Released: 2015-05-28 New Features: - Get the firmware version from the device descriptors (Richard Hughes) - Run the offline actions using systemd when required (Richard Hughes) - Support OpenHardware devices using the fwupd vendor extensions (Richard Hughes) Bugfixes: - Add an UNKNOWN status so we can return meaningful enum values (Richard Hughes) - Coldplug the devices before acquiring the well known name (Richard Hughes) Version 0.1.2 ~~~~~~~~~~~~~ Released: 2015-04-22 - Add some guidelines for vendors to README (Richard Hughes) - Only allow signed firmware to be upgraded without a password (Richard Hughes) Version 0.1.1 ~~~~~~~~~~~~~ Released: 2015-03-23 New Features: - Add a 'get-updates' command to fwupdmgr (Richard Hughes) - Add and document the offline-update lifecycle (Richard Hughes) - Create a libfwupd shared library (Richard Hughes) Bugfixes: - Create runtime directories if they do not exist (Richard Hughes) - Do not crash when there are no devices to return (Richard Hughes) Version 0.1.0 ~~~~~~~~~~~~~ Released: 2015-03-16 Notes: - fwupd is a simple daemon to allow session software to update firmware.