Asking the user for the UID mapping isn't working very well, as it requires lots
of manual handholding. It also doesn't work very well when the device vendor
does not actually have a PCI ID or if the vendor has split into two entities.
Just use the OUI address as an additional VendorID and match any of the device
IDs against any of the metadata-supplied values.
1. Check FW in bootloader mode, need send reset command to firmware.
2. IAP Type register parameter is defind as how many bytes/page to be written.
3. Write IAP Type function in detach function.
4. Remove IAP Type function in setup function.
5. Modify page format for i2c-device
6. Modify firmware bin file size.
7. Modify firmware update flow when the firmware in bootloader mode.
8. Add another instance ID which corresponds to the IC type & module ID
* `ELANTP\ICTYPE_09&MOD_1234`
9. Add Lenovo ThinkPad X1 nano gen1 to elantp.quick
10. Add recovry device - lenovo thinkpad x1 nanao gen 1
11. Add elan touchpad device - vid:04f3 pid:314f
12. Set the firmware version when the firmware is incorrect.
