Currently we only parse the nvm_version attribute according fwupd
expectations when the device is initially added. Elsewhere we just use
the raw version as is which might be problematic as the version format
can change in the middle (for example "33.02" vs. "33.2"). Fix this so
that fu_plugin_thunderbolt_udev_get_version () always returns parsed
version string.
Update self tests accordingly to have "parsed" version to which we
compare against.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Since the multi controller entry is part of the DROM and its place is
not fixed, it is possible (however unlikely) that the locations between
controller and the image are different. One scenario is that the new
image has typo in device or vendor name string fixed which could cause
the offset to be different.
To handle this case properly we need to read multi controller locations
of both controller and image separately, read their values and then
compare them against each other.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
During review it was pointed out that the return value of
read_drom_entry_location () should be documented because it also returns
TRUE when an entry was not found from the DROM. Caller needs to look for
the location->offset in that case. Add a comment explaining this.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Alpine Ridge and Alpine Ridge LP also include flash size field so follow
Titan Ridge and validate those as well.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
This reverts commit ed7acc7819.
As pointed out by @YehezkelShB during review the Titan Ridge IDs 0x15E8
and 0x15EB are for the NHI (the host controller). Windows SDK tool uses
them to keep track of different controllers but in Linux we don't need
them and can use the already existing bridge IDs.
There is no harm to have them listed but to avoid possible confusion in
future remove them.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Titan Ridge devices may contain multiple controllers so we need to make
sure the supplied NVM image multi controller number matches the
controller in question. This is pretty much same than we had for Alpine
Ridge (X of N) but the difference is that this multi controller
information is found in DROM instead and the location is not fixed.
For this reason we implement a generic DROM entry parser and use it to
dynamically fill in correct location of multi controller entry based on
the controller active firmware.
In addition to that we add a check for the NVM flash size just like we
do for Titan Ridge host.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Titan Ridge has same set of bits than Alpine Ridge telling whether the
Thunderbolt controller is in native or legacy mode. Add validation for
that.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
We need to make sure the Thunderbolt controller and the NVM image agree
with the expected flash memory size.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Add 0x15E8 and 0x15EB Titan Ridge IDs that were previously missed.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Thunderbolt devices typically have a discrete PD (power delivery)
controller and firmware for that controller is part of the NVM image. To
make sure the supplied NVM image provides the necessary PD firmware we
implement a check that compares existence of both PD pointers and fails
the validation if they differ.
Since the PD pointer is part of ARC_PARAMS section we need to populate
that section offset also for hosts (following DROM section).
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
At least with Titan Ridge devices 50 * 20 ms is way too short time
reading nvm_version so most of the time the daemon fails to figure out
the version of the just connected device. To make it work better with
Titan Ridge devices increase the timeout to 50 * 200 ms.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
There are other places in the plugin where we read nvm_version and it
can return -EAGAIN as well. To make sure it works consistenly accross
the plugin factor reading nvm_version to a helper function and use instead.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
There are a lot of hacks here;
* Pulling newer libappstream-glib from Fedora
* Pulling a systemd backport
* Manually installing pillow and pygobject
* PKCS7 is turned off (gnutls is too old)
GLib creates two static inline functions for paramaters that may
not be used that set off warnings in clang but not gcc.
Ignore these on clang builds everywhere that
G_DEFINE_AUTOPTR_CLEANUP_FUNC is used.
Kernel v4.15 added support for native enumeration of Thunderbolt
topology. The enumeration mode affects both the BIOS and TBT FW
operation so they must agree on it. Platforms may support both modes,
native and "legacy" (or "BIOS-assist").
This change makes sure the new image is compatible with the current
controller mode (otherwise the BIOS and TBT FW will not be alligned on
it at least until next boot) and also adds a new GUID generation logic
for a controller in "native" mode so LVFS could contain 2 images, one for
the "legacy" mode and one for "native".
Signed-off-by: Yehezkel Bernat <yehezkel.bernat@intel.com>
This makes more sense; we're updating the device, not the plugin itself.
This also means we don't need to funnel everything through callbacks like
GFileProgressCallback and we can also update the state without adding an
explicit callback to each derived device type.
Kernel 4.15 adds support for Thunderbolt P2P devices via
CONFIG_THUNDERBOLT_NET. When turned on and activated fwupd will
show an empty device representing the IP connection between machines.
These device types aren't useful in fwupd and should be filtered.
Suggested-by: Mika Westerberg <mika.westerberg@intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
It's actually less scary to see a SHA1 hash than it is to see a path like
/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2. It's also way easier to
copy and paste into the various fwupdmgr command that require a device ID and
also means we can match a partial prefix much like git allows.
If we also move to a model where plugins can be changed during different stages
of the update (e.g. during detach) then the device might change connection type
and then the sysfs path not only becomes difficult to paste, but incorrect.
Session software doesn't care about the format of the device ID (it is supposed
to be an implementation detail) and so there's no API or ABI break here. A few
plugins also needed to be ported, but nothing too worrying.
umockdev 0.9.4 changed how to test for running in mock and this
causes the assumptions on mock testing at init to fail.
Move the test for this to after the environment has been set up.
This allows us to show the devices in a GUI with a nice icon. Some of the icon
mappings are not perfect and I'll be asking the GNOME designers for some
additions to the icon specification.
Custom vendor icons can also be specified, and /usr/share/fwupd/icons would be
a good place to put them. If vendor icons are used they should show a physical
device with the branding, rather than just the vendor logo.
Over the months the original meaning of ALLOW_OFFLINE and ALLOW_ONLINE have be
lost, and there is now a confusing mixture of uses in the source tree. With this
commit we make it clear the UPDATABLE flag is used to specify when the device is
updatable (e.g. from the desktop live session, or from the systemd offline
updates mode, or both) and the NEEDS_REBOOT flag lets us know when the update
is actually going to be done.
For instance, a UEFI UpdateCapsule can be *scheduled* from either the desktop
or from the update mode (but the latter would be a bit weird), but does require
a reboot. Some devices might only be updatable outside the live session, for
instance a hard drive update or a GPU update -- there's just too much going on
with a live session and we want to tightly control what's running during the
firmware flash.
This also means we don't have to "retry" the update when scheduling an update
that really can be scheduled whenever, but just requires a reboot to apply.
Thunderbolt has a new kernel interface starting from version 4.13,
which simplifies updating the host controller and devices: the
kernel now exposes a sysfs interface for the non-volatile memory
as a device node. This can be used to write the new firmware blob.
Updates are then triggered also via a simple write to a sysfs
file (nvm_authenticate), which in turn is also used for error
reporting.
The plugin should be functionally, but a few items are missing:
- image verification
- safe mode handling
Automake and autoconf are impossible to fully understand and Meson now provides
everything we need for a much smaller, faster, and more understandable build.
See http://mesonbuild.com/ for more information.
* thunderbolt: Add special handling for safe mode on Dell systems
Dell systems are known to have the Model ID the same as the SystemID
that can be recovered from libsmbios. If the thunderbolt controller
is in safe mode, identify with this ID to allow the controller to be
flashed with a good FW.
* Minor changes in Thunderbolt README file
* Remove PCI-oriented GUID
* Handle Thunderbolt controller in safe-mode
* Get progress status updates for Thunderbolt
* Fix for Thunderbolt FW version display
* Style changes from pull request review
