This allows us to 'nest' firmware formats, and removes a ton of duplication.
The aim here is to deprecate FuFirmwareImage -- it's almost always acting
as a 'child' FuFirmware instance, and even copies most of the vfuncs to allow
custom types. If I'm struggling to work out what should be a FuFirmware and
what should be a FuFirmwareImage then a plugin author has no hope.
For simple payloads we were adding bytes into an image and then the image into
a firmware. This gets really messy when most plugins are treating the FuFirmware
*as* the binary firmware file.
The GBytes saved in the FuFirmware would be considered the payload with the
aim of not using FuFirmwareImage in the single-image case.
Rather than trying to guess typos, force each plugin to register the quirk
keys it supports, so we can show a sensible warning if required at startup on
the console.
The best way of not getting something wrong is to not require it in the first
place...
All plugins now use DeviceInstanceId-style quirk matches and we can just drop
the prefix in all files. We were treating HwId=, Guid= and DeviceInstanceId= in
exactly the same way -- they're just converted to GUIDs when building the silo!
Devices may want to support more than one protocol, and for some devices
(e.g. Unifying peripherals stuck in bootloader mode) you might not even be able
to query for the correct protocol anyway.
It is far too easy to forget to set FWUPD_DEVICE_FLAG_NO_GUID_MATCHING for new
plugins, and without it it all works really well *until* a user has two devices
of the same type installed at the same time and then one 'disappears' for hard
to explain reasons. Typically we only need it for replug anyway!
Explicitly opt-in to this rarely-required behaviour, with the default to just
use the physical and logical IDs. Also document the update behavior for each
plugin to explain why the flag is being used.
This allows you to have two identical Unifying plugged in without one of them
being hidden from the user, at the same time allowing a HIDRAW<->USB transition
when going to and from bootloader and runtime modes.
This removes the workaround added in 99eb3f06b6.
Fixes https://github.com/fwupd/fwupd/issues/2915
This allows a device subclass to call the parent method after doing an initial
action, or even deliberately not call the *generic* parent method at all.
It also simplifies the plugins; you no longer have to remember what the plugin
is deriving from and accidentally clobber the wrong superclass method.
At the moment FuChunks are sometimes mutable, and sometimes immutable, and it's
all a bit too low level for comfort.
Before we can do any kind of optimisation or verification we need plugins to
stop reading directly from the C structure. The aim here is to make FuChunk
optionally mutable without making assumptions about the memory model, and also
to be able to introspect it for the docs.
When this is done, include:
* Including the hash
* Including anything that is not ABI stable in plugins yet
Suggested-by: Simon McVittie <smcv@debian.org>
I was asked the other day how many machines would support a /dev/mem mmap'd
update mechanism, and I had to say that I didn't know. We use direct port IO in
the SuperIO plugin too, and it would be good to know how quickly we need to
port this to something else.
The end year is legally and functionally redundant, and more importantly causes
cherry-pick conflicts when trying to maintain old branches. Use git for history.
Asking the user for the UID mapping isn't working very well, as it requires lots
of manual handholding. It also doesn't work very well when the device vendor
does not actually have a PCI ID or if the vendor has split into two entities.
Just use the OUI address as an additional VendorID and match any of the device
IDs against any of the metadata-supplied values.
This allows us to handle this in the plugin, which might mean detaching the
*proxy* device. It's also very important as a few plugins reboot the device
in ->attach() to get the new firmware version, which isn't required for a dump.
This partially reverts a58510b246 and does the
detach and attach in the few plugins where actually required.
Conceptually we were trying to stuff subtly different actions into one vfunc:
* Read firmware from the device to update the verification checksums
* Read a firmware blob from the device for debugging
For the first action we might want to mask out the sections of the flash with
serial numbers (so the verification hashes match the ones published on the LVFS)
and for the second we want just a raw ROM file from the hardware with no
pre-processing that we can compare against an external SPI dumper.
Split out ->dump_firmware to get the raw blob, and allow plugins to also
implement ->read_firmware() if they have to mask out specific offsets or remove
specific images from the FuFirmware container.
In the common case when masking is not required, fall back to using a 'binary'
FuFirmware automatically to make most plugins simpler.
Print the sysfs path for devices deriving from FuUdevDevice, which also allows
us to use FU_UDEV_DEVICE_DEBUG without monkey-patching the plugins that also
define a device_class->to_string() vfunc.
If we say that the version format should be the same for the `version_lowest`
and the `version_bootloader` then it does not always make sense to set it at
the same time.
Moving the `version_format` to a standalone first-class property also means it
can be typically be set in the custom device `_init()` function, which means we
don't need to worry about *changing* ther version format as set by the USB and
UDev superclass helpers.
Some plugins have devices with more than one protocol. Logically the protocol
belongs to the device, not the plugin, and in the future we could use this to
further check firmware that's about to be deployed.
This is also not exported into libfwupd (yet?) as it's remains a debug-feature
only -- protocols are not actually required for devices to be added.
In many plugins we've wanted to use ->prepare_firmware() to parse the firmware
ahead of ->detach() and ->write_firmware() but this has the limitation that it
can only return a single blob of data.
For many devices, multiple binary blobs are required from one parsed image,
for instance providing signatures, config and data blobs that have to be pushed
to the device in different way.
This also means we parse the firmware *before* we ask the user to detach.
Break the internal FuDevice API to support these firmware types as they become
more popular.
This also allows us to move the Intel HEX and SREC parsing out of the dfu plugin
as they are used by a few plugins now, and resolving symbols between plugins
isn't exactly awesome.
This leads to madness, as some formats are supersets of the detected types,
e.g. 'intel-me' is detected as 'quad' and 'bcd' is detected as 'pair'.
Where the version format is defined in a specification or hardcoded in the
source use a hardcoded enum value, otherwise use a quirk override.
Additionally, warn if the version does not match the defined version format
