The best way of not getting something wrong is to not require it in the first
place...
All plugins now use DeviceInstanceId-style quirk matches and we can just drop
the prefix in all files. We were treating HwId=, Guid= and DeviceInstanceId= in
exactly the same way -- they're just converted to GUIDs when building the silo!
1. Check FW in bootloader mode, need send reset command to firmware.
2. IAP Type register parameter is defind as how many bytes/page to be written.
3. Write IAP Type function in detach function.
4. Remove IAP Type function in setup function.
5. Modify page format for i2c-device
6. Modify firmware bin file size.
7. Modify firmware update flow when the firmware in bootloader mode.
8. Add another instance ID which corresponds to the IC type & module ID
* `ELANTP\ICTYPE_09&MOD_1234`
9. Add Lenovo ThinkPad X1 nano gen1 to elantp.quick
10. Add recovry device - lenovo thinkpad x1 nanao gen 1
11. Add elan touchpad device - vid:04f3 pid:314f
12. Set the firmware version when the firmware is incorrect.
I2C doesn't have any specification for what is a probe and what is a more
destructive action. Sending tx_buf out on the i2c bus to a generic address
might not be safe in all cases.
To prevent this, use a HWID to check the machine DMI value during device
creation before ->probe() or ->setup() is called on the device.
