It is far too easy to forget to set FWUPD_DEVICE_FLAG_NO_GUID_MATCHING for new
plugins, and without it it all works really well *until* a user has two devices
of the same type installed at the same time and then one 'disappears' for hard
to explain reasons. Typically we only need it for replug anyway!
Explicitly opt-in to this rarely-required behaviour, with the default to just
use the physical and logical IDs. Also document the update behavior for each
plugin to explain why the flag is being used.
This allows you to have two identical Unifying plugged in without one of them
being hidden from the user, at the same time allowing a HIDRAW<->USB transition
when going to and from bootloader and runtime modes.
This removes the workaround added in 99eb3f06b6.
Fixes https://github.com/fwupd/fwupd/issues/2915
1. Check FW in bootloader mode, need send reset command to firmware.
2. IAP Type register parameter is defind as how many bytes/page to be written.
3. Write IAP Type function in detach function.
4. Remove IAP Type function in setup function.
5. Modify page format for i2c-device
6. Modify firmware bin file size.
7. Modify firmware update flow when the firmware in bootloader mode.
8. Add another instance ID which corresponds to the IC type & module ID
* `ELANTP\ICTYPE_09&MOD_1234`
9. Add Lenovo ThinkPad X1 nano gen1 to elantp.quick
10. Add recovry device - lenovo thinkpad x1 nanao gen 1
11. Add elan touchpad device - vid:04f3 pid:314f
12. Set the firmware version when the firmware is incorrect.
