Emit process warning once per process when delay is a negative number or
not a number, this will prevent unexpected behaviour caused by invalid
`delay` also keep the consistency of the behaviour and warning message
for `TIMEOUT_MAX` number As the negative number is invalid delay will be
set to 1.
PR-URL: https://github.com/nodejs/node/pull/46678
Reviewed-By: Debadree Chatterjee <debadree333@gmail.com>
Reviewed-By: Ulises Gascón <ulisesgascongonzalez@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Chengzhong Wu <legendecas@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/48633
Reviewed-By: Zeyu "Alex" Yang <himself65@outlook.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Robert Nagy <ronagy@icloud.com>
console.error is more suitable than console.log for error case.
PR-URL: https://github.com/nodejs/node/pull/46002
Reviewed-By: Mohammed Keyvanzadeh <mohammadkeyvanzade94@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Some core modules can be loaded with or without the `node:` prefix.
Using the prefix disambiguates which specifiers refer to core modules.
This commit updates the docs to use the prefix everywhere a core module
is referenced.
PR-URL: https://github.com/nodejs/node/pull/42752
Fixes: https://github.com/nodejs/node/issues/38343
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Mestery <mestery@protonmail.com>
Reviewed-By: Darshan Sen <raisinten@gmail.com>
Reviewed-By: Akhil Marsonya <akhil.marsonya27@gmail.com>
Reviewed-By: Rafael Gonzaga <rafael.nunu@hotmail.com>
Reviewed-By: Mohammed Keyvanzadeh <mohammadkeyvanzade94@gmail.com>
Reviewed-By: Geoffrey Booth <webadmin@geoffreybooth.com>
Reviewed-By: Stephen Belanger <admin@stephenbelanger.com>
Notable Changes:
Deprecations and Removals:
- (SEMVER-MAJOR) fs: runtime deprecate string coercion in `fs.write`,
`fs.writeFileSync`
(Livia Medeiros) (https://github.com/nodejs/node/pull/42607)
- (SEMVER-MAJOR) dns: remove `dns.lookup` and `dnsPromises.lookup`
options type coercion
(Antoine du Hamel) (https://github.com/nodejs/node/pull/41431)
- (SEMVER-MAJOR) process: runtime deprecate multipleResolves
(Benjamin Gruenbaum) (https://github.com/nodejs/node/pull/41896)
- (SEMVER-MAJOR) stream: remove thenable support (Robert Nagy)
(https://github.com/nodejs/node/pull/40773)
- (SEMVER-MAJOR) tls: move tls.parseCertString to end-of-life
(Tobias Nießen) (https://github.com/nodejs/node/pull/41479)
fetch (experimental):
An experimental fetch API is available on the global scope by default.
The implementation is based upon https://undici.nodejs.org/#/,
an HTTP/1.1 client written for Node.js by contributors to the project.
Through this addition, the following globals are made available: `fetch`
, `FormData`, `Headers`, `Request`, `Response`.
Disable this API with the `--no-experimental-fetch` command-line flag.
Contributed by Michaël Zasso in https://github.com/nodejs/node/pull/41811.
HTTP Timeouts:
`server.headersTimeout`, which limits the amount of time the parser will
wait to receive the complete HTTP headers, is now set to `60000` (60
seconds) by default.
`server.requestTimeout`, which sets the timeout value in milliseconds
for receiving the entire request from the client, is now set to `300000`
(5 minutes) by default.
If these timeouts expire, the server responds with status 408 without
forwarding the request to the request listener and then closes the
connection.
Both timeouts must be set to a non-zero value to protect against
potential Denial-of-Service attacks in case the server is deployed
without a reverse proxy in front.
Contributed by Paolo Insogna in https://github.com/nodejs/node/pull/41263.
Test Runner module (experimental):
The `node:test` module facilitates the creation of JavaScript tests that
report results in TAP format. This module is only available under the
`node:` scheme.
Contributed by Colin Ihrig in https://github.com/nodejs/node/pull/42325.
Toolchain and Compiler Upgrades:
- Prebuilt binaries for Linux are now built on Red Hat Enterprise Linux
(RHEL) 8 and are compatible with Linux distributions based on glibc
2.28 or later, for example, Debian 10, RHEL 8, Ubuntu 20.04.
- Prebuilt binaries for macOS now require macOS 10.15 or later.
- For AIX the minimum supported architecture has been raised from Power
7 to Power 8.
Prebuilt binaries for 32-bit Windows will initially not be available due
to issues building the V8 dependency in Node.js. We hope to restore
32-bit Windows binaries for Node.js 18 with a future V8 update.
Node.js does not support running on operating systems that are no longer
supported by their vendor. For operating systems where their vendor has
planned to end support earlier than April 2025, such as Windows 8.1
(January 2023) and Windows Server 2012 R2 (October 2023), support for
Node.js 18 will end at the earlier date.
Full details about the supported toolchains and compilers are documented
in the Node.js `BUILDING.md` file.
Contributed by Richard Lau in https://github.com/nodejs/node/pull/42292,
https://github.com/nodejs/node/pull/42604 and https://github.com/nodejs/node/pull/42659
, and Michaël Zasso in https://github.com/nodejs/node/pull/42105 and
https://github.com/nodejs/node/pull/42666.
V8 10.1:
The V8 engine is updated to version 10.1, which is part of Chromium 101.
Compared to the version included in Node.js 17.9.0, the following new
features are included:
- The `findLast` and `findLastIndex` array methods.
- Improvements to the `Intl.Locale` API.
- The `Intl.supportedValuesOf` function.
- Improved performance of class fields and private class methods (the
initialization of them is now as fast as ordinary property stores).
The data format returned by the serialization API (`v8.serialize(value)`)
has changed, and cannot be deserialized by earlier versions of Node.js.
On the other hand, it is still possible to deserialize the previous
format, as the API is backwards-compatible.
Contributed by Michaël Zasso in https://github.com/nodejs/node/pull/42657.
Web Streams API (experimental):
Node.js now exposes the experimental implementation of the Web Streams
API on the global scope. This means the following APIs are now globally
available:
- `ReadableStream`, `ReadableStreamDefaultReader`,
`ReadableStreamBYOBReader`, `ReadableStreamBYOBRequest`,
`ReadableByteStreamController`, `ReadableStreamDefaultController`,
`TransformStream`, `TransformStreamDefaultController`, `WritableStream`,
`WritableStreamDefaultWriter`, `WritableStreamDefaultController`,
`ByteLengthQueuingStrategy`, `CountQueuingStrategy`, `TextEncoderStream`,
`TextDecoderStream`, `CompressionStream`, `DecompressionStream`.
Contributed James Snell in https://github.com/nodejs/node/pull/39062,
and Antoine du Hamel in https://github.com/nodejs/node/pull/42225.
Other Notable Changes:
- (SEMVER-MAJOR) buffer: expose Blob as a global
(James M Snell) (https://github.com/nodejs/node/pull/41270)
- (SEMVER-MAJOR) child\_process: improve argument validation
(Rich Trott) (https://github.com/nodejs/node/pull/41305)
- doc: add RafaelGSS to collaborators
(RafaelGSS) (https://github.com/nodejs/node/pull/42718)
- (SEMVER-MAJOR) http: make TCP noDelay enabled by default
(Paolo Insogna) (https://github.com/nodejs/node/pull/42163)
- (SEMVER-MAJOR) net: make `server.address()` return an integer for
`family`
(Antoine du Hamel) (https://github.com/nodejs/node/pull/41431)
- (SEMVER-MAJOR) worker: expose BroadcastChannel as a global
(James M Snell) (https://github.com/nodejs/node/pull/41271)
- (SEMVER-MAJOR) worker: graduate BroadcastChannel to supported
(James M Snell) (https://github.com/nodejs/node/pull/41271)
Semver-Major Commits:
- (SEMVER-MAJOR) assert,util: compare RegExp.lastIndex while using deep
equal checks
(Ruben Bridgewater) (https://github.com/nodejs/node/pull/41020)
- (SEMVER-MAJOR) buffer: refactor `byteLength` to remove outdated
optimizations
(Rongjian Zhang) (https://github.com/nodejs/node/pull/38545)
- (SEMVER-MAJOR) buffer: expose Blob as a global
(James M Snell) (https://github.com/nodejs/node/pull/41270)
- (SEMVER-MAJOR) buffer: graduate Blob from experimental
(James M Snell) (https://github.com/nodejs/node/pull/41270)
- (SEMVER-MAJOR) build: make x86 Windows support temporarily
experimental
(Michaël Zasso) (https://github.com/nodejs/node/pull/42666)
- (SEMVER-MAJOR) build: bump macOS deployment target to 10.15
(Richard Lau) (https://github.com/nodejs/node/pull/42292)
- (SEMVER-MAJOR) build: downgrade Windows 8.1 and server 2012 R2 to
experimental
(Michaël Zasso) (https://github.com/nodejs/node/pull/42105)
- (SEMVER-MAJOR) child\_process: improve argument validation
(Rich Trott) (https://github.com/nodejs/node/pull/41305)
- (SEMVER-MAJOR) cluster: make `kill` to be just `process.kill`
(Bar Admoni) (https://github.com/nodejs/node/pull/34312)
- (SEMVER-MAJOR) crypto: cleanup validation
(Mohammed Keyvanzadeh) (https://github.com/nodejs/node/pull/39841)
- (SEMVER-MAJOR) crypto: prettify othername in PrintGeneralName
(Tobias Nießen) (https://github.com/nodejs/node/pull/42123)
- (SEMVER-MAJOR) crypto: fix X509Certificate toLegacyObject
(Tobias Nießen) (https://github.com/nodejs/node/pull/42124)
- (SEMVER-MAJOR) crypto: use RFC2253 format in PrintGeneralName
(Tobias Nießen) (https://github.com/nodejs/node/pull/42002)
- (SEMVER-MAJOR) crypto: change default check(Host|Email) behavior
(Tobias Nießen) (https://github.com/nodejs/node/pull/41600)
- (SEMVER-MAJOR) deps: V8: cherry-pick semver-major commits from 10.2
(Michaël Zasso) (https://github.com/nodejs/node/pull/42657)
- (SEMVER-MAJOR) deps: update V8 to 10.1.124.6
(Michaël Zasso) (https://github.com/nodejs/node/pull/42657)
- (SEMVER-MAJOR) deps: update V8 to 9.8.177.9
(Michaël Zasso) (https://github.com/nodejs/node/pull/41610)
- (SEMVER-MAJOR) deps: update V8 to 9.7.106.18
(Michaël Zasso) (https://github.com/nodejs/node/pull/40907)
- (SEMVER-MAJOR) dns: remove `dns.lookup` and `dnsPromises.lookup`
options type coercion
(Antoine du Hamel) (https://github.com/nodejs/node/pull/41431)
- (SEMVER-MAJOR) doc: update minimum glibc requirements for Linux
(Richard Lau) (https://github.com/nodejs/node/pull/42659)
- (SEMVER-MAJOR) doc: update AIX minimum supported arch
(Richard Lau) (https://github.com/nodejs/node/pull/42604)
- (SEMVER-MAJOR) fs: runtime deprecate string coercion in `fs.write`,
`fs.writeFileSync`
(Livia Medeiros) (https://github.com/nodejs/node/pull/42607)
- (SEMVER-MAJOR) http: refactor headersTimeout and requestTimeout logic
(Paolo Insogna) (https://github.com/nodejs/node/pull/41263)
- (SEMVER-MAJOR) http: make TCP noDelay enabled by default
(Paolo Insogna) (https://github.com/nodejs/node/pull/42163)
- (SEMVER-MAJOR) lib: enable fetch by default
(Michaël Zasso) (https://github.com/nodejs/node/pull/41811)
- (SEMVER-MAJOR) lib: replace validator and error
(Mohammed Keyvanzadeh) (https://github.com/nodejs/node/pull/41678)
- (SEMVER-MAJOR) module,repl: support 'node:'-only core modules
(Colin Ihrig) (https://github.com/nodejs/node/pull/42325)
- (SEMVER-MAJOR) net: make `server.address()` return an integer for
`family`
(Antoine du Hamel) (https://github.com/nodejs/node/pull/41431)
- (SEMVER-MAJOR) process: disallow some uses of Object.defineProperty()
on process.env
(Himself65) (https://github.com/nodejs/node/pull/28006)
- (SEMVER-MAJOR) process: runtime deprecate multipleResolves
(Benjamin Gruenbaum) (https://github.com/nodejs/node/pull/41896)
- (SEMVER-MAJOR) readline: fix question still called after closed
(Xuguang Mei) (https://github.com/nodejs/node/pull/42464)
- (SEMVER-MAJOR) stream: remove thenable support
(Robert Nagy) (https://github.com/nodejs/node/pull/40773)
- (SEMVER-MAJOR) stream: expose web streams globals, remove runtime
experimental warning
(Antoine du Hamel) (https://github.com/nodejs/node/pull/42225)
- (SEMVER-MAJOR) stream: need to cleanup event listeners if last stream
is readable
(Xuguang Mei) (https://github.com/nodejs/node/pull/41954)
- (SEMVER-MAJOR) stream: revert revert `map` spec compliance
(Benjamin Gruenbaum) (https://github.com/nodejs/node/pull/41933)
- (SEMVER-MAJOR) stream: throw invalid arg type from End Of Stream
(Jithil P Ponnan) (https://github.com/nodejs/node/pull/41766)
- (SEMVER-MAJOR) stream: don't emit finish after destroy
(Robert Nagy) (https://github.com/nodejs/node/pull/40852)
- (SEMVER-MAJOR) stream: add errored and closed props
(Robert Nagy) (https://github.com/nodejs/node/pull/40696)
- (SEMVER-MAJOR) test: add initial test module
(Colin Ihrig) (https://github.com/nodejs/node/pull/42325)
- (SEMVER-MAJOR) timers: refactor internal classes to ES2015 syntax
(Rabbit) (https://github.com/nodejs/node/pull/37408)
- (SEMVER-MAJOR) tls: represent registeredID numerically always
(Tobias Nießen) (https://github.com/nodejs/node/pull/41561)
- (SEMVER-MAJOR) tls: move tls.parseCertString to end-of-life
(Tobias Nießen) (https://github.com/nodejs/node/pull/41479)
- (SEMVER-MAJOR) url: throw on NULL in IPv6 hostname
(Rich Trott) (https://github.com/nodejs/node/pull/42313)
- (SEMVER-MAJOR) v8: make v8.writeHeapSnapshot() error codes consistent
(Darshan Sen) (https://github.com/nodejs/node/pull/42577)
- (SEMVER-MAJOR) v8: make writeHeapSnapshot throw if fopen fails
(Antonio Román) (https://github.com/nodejs/node/pull/41373)
- (SEMVER-MAJOR) worker: expose BroadcastChannel as a global
(James M Snell) (https://github.com/nodejs/node/pull/41271)
- (SEMVER-MAJOR) worker: graduate BroadcastChannel to supported
(James M Snell) (https://github.com/nodejs/node/pull/41271)
PR-URL: https://github.com/nodejs/node/pull/42262
Adds experimental implementations of the yield and wait APIs being
explored at https://github.com/WICG/scheduling-apis.
When I asked the WHATWG folks about the possibility of standardizing the
[awaitable versions of setTimeout/setImmediate](https://github.com/whatwg/html/issues/7340)
that we have implemented in `timers/promises`, they pointed at the work
in progress scheduling APIs draft as they direction they'll be going.
While there is definitely a few thing in that draft that have
questionable utility to Node.js, the yield and wait APIs map cleanly to
the setImmediate and setTimeout we already have.
Signed-off-by: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/40909
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Antoine du Hamel <duhamelantoine1995@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Darshan Sen <raisinten@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/40403
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Zijian Liu <lxxyxzj@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Antoine du Hamel <duhamelantoine1995@gmail.com>
Main changes:
- Replace current HTML anchor generation to match
header anchor generation in Github markdown.
- Remove unnecessary double namespacing on generated anchors/links (E.G.
`esm.md#loaders` instead of `esm.md#esm_loaders`).
- Anchors/links are automatically prefixed with their respective modules
when concatenated for usage in `all.html`.
Benefits:
- All anchor links within and between markdown API docs actually work.
- Adding new anchor links no longer requires contributors to generate
the HTML docs first to look up the correct anchors.
- Anchors are much shorter.
- All previous anchor links are preserved by generating hidden legacy
anchors.
PR-URL: https://github.com/nodejs/node/pull/39304
Reviewed-By: Antoine du Hamel <duhamelantoine1995@gmail.com>
Both of the `clearTimeout()` and `clearInterval()` functions in the
`timers` lib accepts the ID of the `Timeout` object returned by the
functions in a number or string type, e.g.
```js
const t = setTimeout(console.log, 5000, 'test');
clearTimeout(t[Symbol.toPrimitive]());
```
PR-URL: https://github.com/nodejs/node/pull/39013
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Darshan Sen <raisinten@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Signed-off-by: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/38112
Reviewed-By: Antoine du Hamel <duhamelantoine1995@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Bryan English <bryan@bryanenglish.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/37738
Reviewed-By: Darshan Sen <raisinten@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Zijian Liu <lxxyxzj@gmail.com>
Reviewed-By: Pooja D P <Pooja.D.P@ibm.com>
It seems that **Default:** was unofficially decided on as
the way to specify default values. This commit updates the API
documentation to use this format more consistently.
PR-URL: https://github.com/nodejs/node/pull/37387
Reviewed-By: Antoine du Hamel <duhamelantoine1995@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Pooja D P <Pooja.D.P@ibm.com>
Reviewed-By: Darshan Sen <raisinten@gmail.com>
Added setInterval async generator to timers\promises.
Utilises async generators to provide an iterator compatible with
`for await`.
Co-Authored-By: Fabian Cook <hello@fabiancook.dev>
fix message
PR-URL: https://github.com/nodejs/node/pull/37153
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Refs: https://github.com/nodejs/node/pull/33950
PR-URL: https://github.com/nodejs/node/pull/36378
Reviewed-By: Antoine du Hamel <duhamelantoine1995@gmail.com>
Reviewed-By: Beth Griggs <bgriggs@redhat.com>
Reviewed-By: Richard Lau <rlau@redhat.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Daijiro Wachi <daijiro.wachi@gmail.com>
This helps catch broken links as part of the test suite. This also
improves the user experience when browsing the markdown files.
PR-URL: https://github.com/nodejs/node/pull/35191
Fixes: https://github.com/nodejs/node/issues/35189
Reviewed-By: Derek Lewis <DerekNonGeneric@inf.is>
Reviewed-By: Jiawen Geng <technicalcute@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
This allows timers to be matched to numeric Ids and therefore used
as keys of an Object, passed and stored without storing the Timer instance.
clearTimeout/clearInterval is modified to support numeric/string Ids.
Co-authored-by: Bradley Farias <bradley.meck@gmail.com>
Co-authored-by: Anatoli Papirovski <apapirovski@mac.com>
Refs: https://github.com/nodejs/node/pull/21152
PR-URL: https://github.com/nodejs/node/pull/34017
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Bradley Farias <bradley.meck@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/34030
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Move the promisified timers implementations into a new sub-module
to avoid the need to promisify. The promisified versions now return
the timers/promises versions.
Also adds `ref` option to the promisified versions
```js
const {
setTimeout,
setImmediate
} = require('timers/promises');
setTimeout(10, null, { ref: false })
.then(console.log);
setImmediate(null, { ref: false })
.then(console.log);
```
Signed-off-by: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/33950
Reviewed-By: Denys Otrishko <shishugi@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Using the new experimental AbortController...
Signed-off-by: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/33833
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
Use explicit trailing `[]` for reference markdown links to prevent
implicit links when references are added to documents.
PR-URL: https://github.com/nodejs/node/pull/29808
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reverts some timers behavior back to as it was before
2930bd1317
That commit introduced an unintended change which allowed non-integer
timeouts to actually exist since the value is no longer converted to an
integer via a TimeWrap handle directly.
Even with the fix in
e9de435498
non-integer timeouts are still indeterministic, because libuv does not
support them.
This fixes the issue by emulating the old behavior:
truncate the `_idleTimeout` before using it.
See comments in
https://github.com/nodejs/node/pull/24214
for more background on this.
PR-URL: https://github.com/nodejs/node/pull/24819
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Link the guide discussing timers and nextTick from the nextTick docs, as
it already was from the timers docs. Make the link text and targets more
specific.
PR-URL: https://github.com/nodejs/node/pull/25619
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Replace some redirected URLs with the final ones.
PR-URL: https://github.com/nodejs/node/pull/21811
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Provide a way to check whether the current timer or immediate is refed.
PR-URL: https://github.com/nodejs/node/pull/20898
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Originally added in
bb5575aa75
discussions such as
https://github.com/nodejs/node/issues/20261
show the usefulness of this API to the Node.js ecosystem.
PR-URL: https://github.com/nodejs/node/pull/20298
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ujjwal Sharma <usharma1998@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
