This makes sure prototypes won't be inspected infinitely for some
obscure object creations. The depth is now taken into account and
the recursion ends when the depth limit is reached.
PR-URL: https://github.com/nodejs/node/pull/29647
Fixes: https://github.com/nodejs/node/issues/29646
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Minwoo Jung <minwoo@nodesource.com>
Previously the enhancement were done right after emitting
`'uncaughtException'`, which meant by the time we knew the
exception was fatal in C++, the error.stack had already been
patched.
This patch moves those routines to be called later during the
fatal exception handling, and split them into two stages:
before and after the inspector is notified by the invocation of
`V8Inspector::exceptionThrown`. We now expand the stack to include
additional informations about unhandled 'error' events before
the inspector is notified, but delay the highlighting of the
frames until after the inspector is notified, so that the
ANSI escape sequences won't show up in the inspector console.
PR-URL: https://github.com/nodejs/node/pull/28308
Fixes: https://github.com/nodejs/node/issues/28287
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
This updates eslint from v6.0.0-alpha.2 to v6.0.1
This also removes eslint-disable comments about `bigint` typeof
checks. Those would otherwise have caused linting errors now that
`bigint` is accepted as valid entry.
PR-URL: https://github.com/nodejs/node/pull/28173
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>
This improves a couple minor things:
* Arrays that contain entries other than `number` or `bigint` are
ordered to the left instead of the right.
* The bias towards more columns got increased. That mainly increases
the number of columns for arrays that contain lots of short entries.
* Columns are now more dense in case they would otherwise have extra
whitespace in-between two columns.
* The maximum columns got increased from 10 to 15.
* The maximum number of columns per `compact` was increased from
3 to 4.
PR-URL: https://github.com/nodejs/node/pull/28070
Refs: https://github.com/nodejs/node/issues/27690
Reviewed-By: James M Snell <jasnell@gmail.com>
Using the `util.inspect` `compact` mode set to something else than
`true` resulted in breaking long lines in case the line would exceed
the `breakLength` option and if it contained whitespace and or new
lines.
It turned out that this behavior was less useful than originally
expected and it is now changed to only break on line breaks if the
`breakLength` option is exceeded for the inspected string. This should
be align better with the user expectation than the former behavior.
PR-URL: https://github.com/nodejs/node/pull/28055
Fixes: https://github.com/nodejs/node/issues/27690
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
This makes sure that large arrays with lots of small entries ignore
the `... n more item(s)` part since it often resulted in output that
users did not expect.
Now that part is printed on a separate line to indicate extra entries.
PR-URL: https://github.com/nodejs/node/pull/28059
Refs: https://github.com/nodejs/node/issues/27690
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
This adds a reference anchor to circular structures when using
`util.inspect`. That way it's possible to identify with what object
the circular reference corresponds too.
PR-URL: https://github.com/nodejs/node/pull/27685
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
This makes sure that `util.format` uses `String` to stringify an object
in case the object has an own property named `toString` with type
`function`. That way objects that do not have such function are still
inspected using `util.inspect` and the old behavior is preserved as
well.
PR-URL: https://github.com/nodejs/node/pull/27621
Refs: https://github.com/facebook/jest/issues/8443
Reviewed-By: Roman Reiss <me@silverwind.io>
It is probably not necessary to visualize the `code` property as part
of the name of an error since all extra properties will be visible
anyway due to https://github.com/nodejs/node/pull/272431.
PR-URL: https://github.com/nodejs/node/pull/27733
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
This makes sure that an objects constructor name is always returned
in a similar fashion instead of having different outputs depending
on the object shape and the code path taken.
PR-URL: https://github.com/nodejs/node/pull/27733
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
This simplifies the handling of objects that exceed 128mb. Instead
of using a separate property to identify that all following inputs
should only return their constructor name it'll just set the depth
to -1. That has the almost the same behavior as before while providing
a better output in some cases. The performance should be almost
identical as well.
PR-URL: https://github.com/nodejs/node/pull/27733
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
This makes sure the constructor is reconstructed in cases where we
otherwise would not be able to detect the actual constructor anymore.
That way some `util.inspect` output is improved.
PR-URL: https://github.com/nodejs/node/pull/27668
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
This adds an extra check to `util.inspect` to closer inspect object
constructors in case there's not much other information about the
constructor.
PR-URL: https://github.com/nodejs/node/pull/27522
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>
This makes sure the `%d`, `%f`, `%i` and `%s` formatters properly
visualize `-0`.
On top, this also switches to using a safer symbol toString function
by using the primordial function.
PR-URL: https://github.com/nodejs/node/pull/27499
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Rich Trott <rtrott@gmail.com>
This commit contains the following changes:
1) Add null prototype support for functions.
2) Safely detect async and generator functions.
3) Mark anonymous functions as such instead of just leaving out the
name.
PR-URL: https://github.com/nodejs/node/pull/27227
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: John-David Dalton <john.david.dalton@gmail.com>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
This makes sure manipulated prototypes from boxed primitives will
be highlighted. It also makes sure that a potential `Symbol.toStringTag`
is taken into account.
PR-URL: https://github.com/nodejs/node/pull/27351
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: John-David Dalton <john.david.dalton@gmail.com>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
The function is actually a getter, not a setter.
PR-URL: https://github.com/nodejs/node/pull/27342
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Only special handle `Symbol.toStringTag` if the property is not
enumerable or not the own property of the inspected object.
PR-URL: https://github.com/nodejs/node/pull/27342
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
This makes sure weak entries are only sorted once, while using the
sorted option.
PR-URL: https://github.com/nodejs/node/pull/27052
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Using `util.inspect` on errors is going to highlight userland and
node_module stack frames from now on. This is done by marking Node.js
core frames grey and frames that contain `node_modules` in their path
yellow.
That way it's easy to grasp what frames belong to what code.
PR-URL: https://github.com/nodejs/node/pull/27052
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
This changes the `compact` default from `true` to `3`. That mode
changes arrays to be grouped together, it alignes multiple small
entries on a single line in similar to `compact` true but only for
the most inner three depth levels and the closing brackets are
always on the same indentation as the openeing of the object instead
of at the same line as another property.
Big strings will be naturally broken into multiple lines instead of
having one huge line that is not well readable.
The output size mainly stays the same that way while it will be
smaller in case of big arrays.
Increasing the `breakLength` to 80 adjusts for most terminals that
support at least 80 characters in a single line and improves the
general output that way. A lot of calculations use the `breakLength`
to determine the concrete behavior.
PR-URL: https://github.com/nodejs/node/pull/27109
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Minwoo Jung <minwoo@nodesource.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
This makes sure `compact` number mode causes small proxies and map
entries to be printed on a single line.
It also fixed the line break calculation for `compact` mode when not
set to `true`. It now also adds the additional whitespace, comma and
quotes to the formula to prevent exceeding the `breakLength`.
PR-URL: https://github.com/nodejs/node/pull/27109
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Minwoo Jung <minwoo@nodesource.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
This changes the primordials to expose built-in prototypes with their
methods already uncurried.
The uncurryThis function is therefore moved to the primordials.
All uses of uncurryThis on built-ins are changed to import the relevant
prototypes from primordials.
All uses of Function.call.bind are also changed to use primordials.
PR-URL: https://github.com/nodejs/node/pull/27096
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
This broke due to a recent change that prevents exposing inspect
internals. It now relies on the public API instead and should be a
bit more robust due to that.
PR-URL: https://github.com/nodejs/node/pull/27074
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>
This improves `util.format()` by returning more meaningful results
when using `%s` as specifier and any object as value. Besides that
`BigInt` will also be represented with an `n` at the end to indicate
that it's of type `BigInt`.
PR-URL: https://github.com/nodejs/node/pull/26927
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>
Use the "no-restricted-globals" ESLint rule to lint for it.
PR-URL: https://github.com/nodejs/node/pull/27027
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
This makes sure that errors that contain extra properties show those
properties on a separate line.
PR-URL: https://github.com/nodejs/node/pull/26984
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
This fixes a proportion calculation for lots of short array entries
with at least one bigger one that alone makes up for more than one
fifth of all other entries together.
PR-URL: https://github.com/nodejs/node/pull/26984
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Using `util.inspect()` with the `compact` option set to a number
could result in output that exceeded the `breakLength` option. This
change makes sure that limit is taken into account.
PR-URL: https://github.com/nodejs/node/pull/26914
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
This adds support to visualize the difference between errors with
null prototype or subclassed errors. This has a couple safeguards
to be sure that the output is not intrusive.
PR-URL: https://github.com/nodejs/node/pull/26923
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
This makes sure the arrays returned by Map#entries() are handled as
any other array instead of just visualizing the entries as array.
Therefore options should have an impact on the arrays.
PR-URL: https://github.com/nodejs/node/pull/26918
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
V8 extends the error message for JSON#stringify when encountering
circular structures. The first line of the new error message
is equivalent to the old error message and stays the same across
all circular structure errors.
PR-URL: https://github.com/nodejs/node/pull/26685
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
This makes sure the brace is actually handled as any other brace.
It was handled differently so far than any other brace and that had
an impact on how the output would be formatted.
PR-URL: https://github.com/nodejs/node/pull/26919
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
When using `Errors.captureStackFrames` the error's stack property
is set again. This adds a helper function that wraps this functionality
in a simple API that does not only set the stack including the `code`
property but it also improves the performance to create the error.
The helper works for thrown errors and errors returned from wrapped
functions in case they are Node.js core errors.
PR-URL: https://github.com/nodejs/node/pull/26738
Fixes: https://github.com/nodejs/node/issues/26669
Fixes: https://github.com/nodejs/node/issues/20253
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
So these can be required without requiring the whole `util.js`.
PR-URL: https://github.com/nodejs/node/pull/26468
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
When using `util.inspect()` with `compact` mode set to a number, all
array entries exceeding 6 are going to be grouped together into
logical parts.
PR-URL: https://github.com/nodejs/node/pull/26269
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
This overloads the `compact` option from `util.inspect()`. If it's
set to a number, it is going to align all most inner entries on the
same lign if they adhere to the following:
* The entries do not exceed the `breakLength` options value.
* The entry is one of the local most inner levels up the the one
provided in `compact`.
PR-URL: https://github.com/nodejs/node/pull/26269
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
This prevents leaking of the internal `inspect()` properties when
using a custom inspect function.
It also aligns the indentation to the way it was in v8.0.0 since
that changed unintentionally. All strings returned by the custom
inspect function will now be indented appropriately to the current
depth.
PR-URL: https://github.com/nodejs/node/pull/24971
Refs: https://github.com/nodejs/node/issues/24765
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Rich Trott <rtrott@gmail.com>
It is possible to distinguish the entries iterator from others.
Expose that information to the users as well and improve the
Symbol.toStringTag handling by adding a special tag instead of
replacing the existent information.
PR-URL: https://github.com/nodejs/node/pull/26222
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
The inspection output for Set#entries() was wrong so far as it did
not return an array as it should have. That was a bug in V8 that is
now fixed and the code in Node.js has to be updated accordingly.
PR-URL: https://github.com/nodejs/node/pull/25941
Fixes: https://github.com/nodejs/node/issues/24629
Reviewed-By: Michaël Zasso <targos@protonmail.com>
