Adds `--disable-proto` CLI option which can be set to `delete` or
`throw`.
Fixes#31951
PR-URL: https://github.com/nodejs/node/pull/32279
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Bradley Farias <bradley.meck@gmail.com>
Reviewed-By: Chengzhong Wu <legendecas@gmail.com>
Reviewed-By: Vladimir de Turckheim <vlad2t@hotmail.com>
Convert hard assertion into a throw with a useful error
message in src/module_wrap.cc.
PR-URL: https://github.com/nodejs/node/pull/31899
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Our documentation uses em dashes inconsistently. They are treated
inconsistently typographically too. (For example, they are sometimes
surrounded by spaces and sometimes not.) They are also often confused
with ordinary hyphens such as in the CHANGELOG, where they are
inadvertently mixed together in a single list. The difference is
not obvious in the raw markdown but is very noticeable when rendered,
appearing to be a typographical error (which it in fact is).
The em dash is never needed. There are always alternatives. Remove em
dashes entirely.
PR-URL: https://github.com/nodejs/node/pull/32080
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
This error is no longer used within core. This commit removes it.
PR-URL: https://github.com/nodejs/node/pull/31958
Refs: https://github.com/nodejs/help/issues/2484
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This patch implements `vm.measureMemory()` with the new
`v8::Isolate::MeasureMemory()` API to measure per-context memory
usage. This should be experimental, since detailed memory
measurement requires further integration with the V8 API
that should be available in a future V8 update.
PR-URL: https://github.com/nodejs/node/pull/31824
Refs: https://github.com/ulan/performance-measure-memory
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Denys Otrishko <shishugi@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
This pull request makes fs.watch throw exception,
whenever it is used in an incompatible platform.
For this change following changes were made to api:
1.a new error type has been introduced.
2.fs.watch has been changed accordingly.
Users who use recursive on
non-windows and osx platforms,
will face a new exception.
For this reason, it's a breaking change.
Fixes: https://github.com/nodejs/node/issues/29901
PR-URL: https://github.com/nodejs/node/pull/29947
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/31437
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Currently, Node.js has separate (stateful) APIs for DH/ECDH, and no
support for ECDH-ES. This commit adds a single stateless function to
compute the DH/ECDH/ECDH-ES secret based on two KeyObjects.
PR-URL: https://github.com/nodejs/node/pull/31178
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
This allows using the generateKeyPair API for DH instead of the old
stateful DH APIs.
PR-URL: https://github.com/nodejs/node/pull/31178
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Our docs have a mix of "hostname" and "host name" in prose.
Let's follow the usage of Unix man pages, RFCs, and most
professionally-edited sources, and use "host name" in prose and
"hostname" to refer to the command and in code.
Lint rule forthcoming.
PR-URL: https://github.com/nodejs/node/pull/31326
Refs: https://github.com/nodejs/node/pull/31073
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/31278
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
The default ESM loader supports only file and data URLs.
This PR adds better error message for it.
PR-URL: https://github.com/nodejs/node/pull/31129
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Guy Bedford <guybedford@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Add the `pskCallback` client/server option, which resolves an identity
or identity hint to a pre-shared key.
Add the `pskIdentityHint` server option to set the identity hint for the
ServerKeyExchange message.
Co-authored-by: Chris Osborn <chris.osborn@sitelier.com>
Co-authored-by: stephank <gh@stephank.nl>
Co-authored-by: Taylor Zane Glaeser <tzglaeser@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/23188
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
It is trivially possible to cause an internal assertion error with
tls.createSecurePair(). Throw a friendly error instead. Reserve internal
assertions for things that we believe to be impossible.
PR-URL: https://github.com/nodejs/node/pull/30718
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Allow specifying resource limits for the JS engine instance created
as part of a Worker.
PR-URL: https://github.com/nodejs/node/pull/26628
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Franziska Hinkelmann <franziska.hinkelmann@gmail.com>
This adds long-requested methods for asynchronously interacting and
iterating through directory entries by using `uv_fs_opendir`,
`uv_fs_readdir`, and `uv_fs_closedir`.
`fs.opendir()` and friends return an `fs.Dir`, which contains methods
for doing reads and cleanup. `fs.Dir` also has the async iterator
symbol exposed.
The `read()` method and friends only return `fs.Dirent`s for this API.
Having a entry type or doing a `stat` call is deemed to be necessary in
the majority of cases, so just returning dirents seems like the logical
choice for a new api.
Reading when there are no more entries returns `null` instead of a
dirent. However the async iterator hides that (and does automatic
cleanup).
The code lives in separate files from the rest of fs, this is done
partially to prevent over-pollution of those (already very large)
files, but also in the case of js allows loading into `fsPromises`.
Due to async_hooks, this introduces a new handle type of `DIRHANDLE`.
This PR does not attempt to make complete optimization of
this feature. Notable future improvements include:
- Moving promise work into C++ land like FileHandle.
- Possibly adding `readv()` to do multi-entry directory reads.
- Aliasing `fs.readdir` to `fs.scandir` and doing a deprecation.
Refs: https://github.com/nodejs/node-v0.x-archive/issues/388
Refs: https://github.com/nodejs/node/issues/583
Refs: https://github.com/libuv/libuv/pull/2057
PR-URL: https://github.com/nodejs/node/pull/29349
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: David Carlier <devnexen@gmail.com>
Use explicit trailing `[]` for reference markdown links to prevent
implicit links when references are added to documents.
PR-URL: https://github.com/nodejs/node/pull/29808
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Convert to asterisks when there are mixed styles in document.
Addresses Markdownlint MD004 rule
PR-URL: https://github.com/nodejs/node/pull/29516
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
This API is designed to enable worker threads use Inspector protocol
on main thread (and other workers through NodeWorker domain).
Note that worker can cause dead lock by suspending itself. I will
work on a new API that will allow workers to be hidden from the
inspector.
Fixes: https://github.com/nodejs/node/issues/28828
PR-URL: https://github.com/nodejs/node/pull/28870
Reviewed-By: Aleksei Koziatinskii <ak239spb@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
These are rendered as single breaks.
Addresses Markdownlint MD012 rule.
PR-URL: https://github.com/nodejs/node/pull/29352
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Invoke callback with ERR_STREAM_ALREADY_FINISHED error if `end()` is
called on a finished stream.
PR-URL: https://github.com/nodejs/node/pull/28687
Refs: https://github.com/nodejs/node/issues/28667
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Adds a "dependencies" field to resources in policy manifest files.
In order to ease development and testing while using manifests,
wildcard values for both "dependencies" and "integrity" have been
added using the boolean value "true" in the policy manifest.
PR-URL: https://github.com/nodejs/node/pull/28767
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Jan Krems <jan.krems@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
This method blocks current node process until a client sends
Runtime.runifWaitingForDebugger.
It can be useful when we need to report inspector.url() before
waiting for connection:
```
inspector.open(0, undefined, false);
fs.writeFileSync(someFileName, inspector.url());
inspector.waitForDebugger();
```
PR-URL: https://github.com/nodejs/node/pull/28453
Reviewed-By: Eugene Ostroukhov <eostroukhov@google.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Rich Trott <rtrott@gmail.com>
The closing paren was missing. Move to using commas instead.
PR-URL: https://github.com/nodejs/node/pull/28483
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Jiawen Geng <technicalcute@gmail.com>
Historically `error.errno` of system errors thrown by Node.js
can sometimes be the same as `err.code`, which are string
representations of the error numbers. This is useless and incorrect,
and results in an information loss for users since then they
will have to resort to something like
`process.binding('uv'[`UV_${errno}`])` to get to the numeric
error codes.
This patch corrects this behavior by always setting `error.errno`
to be negative numbers. For fabricated errors like `ENOTFOUND`,
`error.errno` is now undefined since there is no numeric equivalent
for them anyway. For c-ares errors, `error.errno` is now undefined
because the numeric representations (negated) can be in conflict
with libuv error codes - this is fine since numeric codes was
not available for c-ares errors anyway.
Users can use the public API `util.getSystemErrorName(errno)`
to retrieve string codes for these numbers.
PR-URL: https://github.com/nodejs/node/pull/28140
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Refactor the C++ code for creating `MessagePort`s to skip calling the
constructor and instead directly instantiating the `InstanceTemplate`,
and always throw an error from the `MessagePort` constructor.
This aligns behaviour with the web, and creating single `MessagePort`s
does not make sense anyway.
PR-URL: https://github.com/nodejs/node/pull/28032
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
`readable.unshift` can take a string as an argument, but that
string wasn't being converted to a Buffer, which caused a
<TypeError: Argument must be a buffer> in some cases. Also if a
string was passed, that string was coerced to utf8 encoding.
A second optional argument `encoding` was added to `unshift` to
fix the encoding issue.
Fixes: https://github.com/nodejs/node/issues/27192
PR-URL: https://github.com/nodejs/node/pull/27194
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
When running the REPL as standalone program it's now possible to use
`process.on('uncaughtException', listener)`. It is going to use those
listeners from now on and the regular error output is suppressed.
It also fixes the issue that REPL instances started inside of an
application would silence all application errors. It is now prohibited
to add the exception listener in such REPL instances. Trying to add
such listeners throws an `ERR_INVALID_REPL_INPUT` error.
Fixes: https://github.com/nodejs/node/issues/19998
PR-URL: https://github.com/nodejs/node/pull/27151
Fixes: https://github.com/nodejs/node/issues/19998
Reviewed-By: Lance Ball <lball@redhat.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Instead of using the public AssertionError, use a simplified
error that describes potential causes of these assertions
and suggests the user to open an issue.
PR-URL: https://github.com/nodejs/node/pull/26635
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
New flag is for string input only
PR-URL: https://github.com/nodejs/node/pull/27184
Reviewed-By: Jan Krems <jan.krems@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
This validates the input to make sure the arguments do not overflow.
Before, if the input would overflow, it would cause the write to be
performt in the wrong spot / result in unexpected behavior.
Instead, just use a strict number validation.
PR-URL: https://github.com/nodejs/node/pull/27045
Fixes: https://github.com/nodejs/node/issues/27043
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Added the `dgram.connect()` and `dgram.disconnect()` methods that
associate/disassociate a udp socket to/from a remote address.
It optimizes for cases where lots of packets are sent to the same
address.
Also added the `dgram.remoteAddress()` method to retrieve the associated
remote address.
PR-URL: https://github.com/nodejs/node/pull/26871
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
When a user attempts to load an encrypted key without supplying a
passphrase, a cryptic OpenSSL error is thrown. This change intercepts
the OpenSSL error and throws a nice error code instead.
PR-URL: https://github.com/nodejs/node/pull/25208
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
A generic error lacks any of the context or detail of the underlying
OpenSSL error, so throw from C++, and report the OpenSSL error to the
callback.
PR-URL: https://github.com/nodejs/node/pull/26868
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Don't force the user to parse the long-style OpenSSL error message,
decorate the error with the library, reason, code, function.
PR-URL: https://github.com/nodejs/node/pull/26868
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
This PR updates the current `--experimental-modules` implementation
based on the work of the modules team and reflects Phase 2 of our
new modules plan.
The largest differences from the current implementation include
* `packge.type` which can be either `module` or `commonjs`
- `type: "commonjs"`:
- `.js` is parsed as commonjs
- default for entry point without an extension is commonjs
- `type: "module"`:
- `.js` is parsed as esm
- does not support loading JSON or Native Module by default
- default for entry point without an extension is esm
* `--entry-type=[mode]`
- allows you set the type on entry point.
* A new file extension `.cjs`.
- this is specifically to support importing commonjs in the
`module` mode.
- this is only in the esm loader, the commonjs loader remains
untouched, but the extension will work in the old loader if you use
the full file path.
* `--es-module-specifier-resolution=[type]`
- options are `explicit` (default) and `node`
- by default our loader will not allow for optional extensions in
the import, the path for a module must include the extension if
there is one
- by default our loader will not allow for importing directories that
have an index file
- developers can use `--es-module-specifier-resolution=node` to
enable the commonjs specifier resolution algorithm
- This is not a “feature” but rather an implementation for
experimentation. It is expected to change before the flag is
removed
* `--experimental-json-loader`
- the only way to import json when `"type": "module"`
- when enable all `import 'thing.json'` will go through the
experimental loader independent of mode
- based on https://github.com/whatwg/html/issues/4315
* You can use `package.main` to set an entry point for a module
- the file extensions used in main will be resolved based on the
`type` of the module
Refs: https://github.com/nodejs/modules/blob/master/doc/plan-for-new-modules-implementation.md
Refs: https://github.com/GeoffreyBooth/node-import-file-specifier-resolution-proposal
Refs: https://github.com/nodejs/modules/pull/180
Refs: https://github.com/nodejs/ecmascript-modules/pull/6
Refs: https://github.com/nodejs/ecmascript-modules/pull/12
Refs: https://github.com/nodejs/ecmascript-modules/pull/28
Refs: https://github.com/nodejs/modules/issues/255
Refs: https://github.com/whatwg/html/issues/4315
Refs: https://github.com/w3c/webcomponents/issues/770
Co-authored-by: Myles Borins <MylesBorins@google.com>
Co-authored-by: John-David Dalton <john.david.dalton@gmail.com>
Co-authored-by: Evan Plaice <evanplaice@gmail.com>
Co-authored-by: Geoffrey Booth <webmaster@geoffreybooth.com>
Co-authored-by: Michaël Zasso <targos@protonmail.com>
PR-URL: https://github.com/nodejs/node/pull/26745
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Guy Bedford <guybedford@gmail.com>
Reviewed-By: Ben Coe <bencoe@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
This aligns `MessagePort`s more with the web API.
Refs: https://github.com/nodejs/node/issues/26463
PR-URL: https://github.com/nodejs/node/pull/26487
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
PR-URL: https://github.com/nodejs/node/pull/26495
Fixes: https://github.com/nodejs/node/issues/26484
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This error is used to propagate errors returned from the
inspector module's command system.
PR-URL: https://github.com/nodejs/node/pull/26255
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Eugene Ostroukhov <eostroukhov@google.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Include the stack of requires that led to a MODULE_NOT_FOUND error.
PR-URL: https://github.com/nodejs/node/pull/25690
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
- Tidy up description in docs.
- Remove a second definition in the docs.
- Remove unused string input parameter.
- Remove duplicate "JavaScript Callstack" in error messages.
PR-URL: https://github.com/nodejs/node/pull/25749
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
One test per each API, so that additional tests in future are modular.
test/common/report.js contain common functions that tests leverage.
PR-URL: https://github.com/nodejs/node/pull/22712
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <Michael_Dawson@ca.ibm.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
a separate section added for node-report at top level
main documentation added to doc/api/report.md
API documentation added to doc/api/process.md
PR-URL: https://github.com/nodejs/node/pull/22712
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <Michael_Dawson@ca.ibm.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
This PR adds the ability to provide Workers with their own
execArgv flags in replacement of the main thread's execArgv. Only
per-Isolate/per-Environment options are allowed. Per-Process options
and V8 flags are not allowed. Passing an empty execArgv array will
reset per-Isolate and per-Environment options of the Worker to their
defaults. If execArgv option is not passed, the Worker will get
the same flags as the main thread.
Usage example:
```
const worker = new Worker(__filename, {
execArgv: ['--trace-warnings'],
});
```
PR-URL: https://github.com/nodejs/node/pull/25467
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
This enables code loaded via the module system to be checked for
integrity to ensure the code loaded matches expectations.
PR-URL: https://github.com/nodejs/node/pull/23834
Reviewed-By: Guy Bedford <guybedford@gmail.com>
Reviewed-By: Vladimir de Turckheim <vlad2t@hotmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
This commit makes multiple important changes:
1. A new key object API is introduced. The KeyObject class itself is
not exposed to users, instead, several new APIs can be used to
construct key objects: createSecretKey, createPrivateKey and
createPublicKey. The new API also allows to convert between
different key formats, and even though the API itself is not
compatible to the WebCrypto standard in any way, it makes
interoperability much simpler.
2. Key objects can be used instead of the raw key material in all
relevant crypto APIs.
3. The handling of asymmetric keys has been unified and greatly
improved. Node.js now fully supports both PEM-encoded and
DER-encoded public and private keys.
4. Conversions between buffers and strings have been moved to native
code for sensitive data such as symmetric keys due to security
considerations such as zeroing temporary buffers.
5. For compatibility with older versions of the crypto API, this
change allows to specify Buffers and strings as the "passphrase"
option when reading or writing an encoded key. Note that this
can result in unexpected behavior if the password contains a
null byte.
PR-URL: https://github.com/nodejs/node/pull/24234
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Add an `inspectOptions` option to the `console` constructor. That
way it's possible to define all inspection defaults for each
`console` instance instead of relying on the `inspect()` defaults.
PR-URL: https://github.com/nodejs/node/pull/24978
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
This adds the `capitalized-comments` eslint rule to verify that
actual sentences use capital letters as starting letters. It ignores
special words and all lines below 62 characters.
PR-URL: https://github.com/nodejs/node/pull/24808
Reviewed-By: Sam Ruby <rubys@intertwingly.net>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Ujjwal Sharma <usharma1998@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
The only known condition where we could not provide appropriate
stdio streams so far were non-console Windows applications.
Since this issue has come up a few times in our issue tracker now,
switch to providing dummy streams for these cases instead.
If there are other valid cases in which `uv_guess_handle` fails,
and where there is a more sensible way to provide stdio,
we’ll probably still find out because the streams don’t work
properly either way.
Refs: https://github.com/nodejs/help/issues/1251
PR-URL: https://github.com/nodejs/node/pull/20640
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
The existing secureProtocol option only allows setting the allowed
protocol to a specific version, or setting it to "all supported
versions". It also used obscure strings based on OpenSSL C API
functions. Directly setting the min or max is easier to use and explain.
PR-URL: https://github.com/nodejs/node/pull/24405
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
This fixes the incorrect enumerations of their possible values, which
weren't up to date with the values actually supported. Also renamed
two arguments that used "format" when they meant "encoding".
PR-URL: https://github.com/nodejs/node/pull/24230
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Simplify text. Add explanation that `code` is the most stable way to
identify an error, in contrast with `message` which is subject to change
between patch-level versions of Node.js. Synchronize list of properties
with text. Order properties alphabetically.
PR-URL: https://github.com/nodejs/node/pull/24090
Fixes: https://github.com/nodejs/node/issues/23975
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Throw an exception instead of crashing when attempting to create
`Buffer` objects from a Context that is not associated with
a Node.js `Environment`.
Possible alternatives for the future might be just returning
a plain `Uint8Array`, or working on providing `Buffer` for all
`Context`s.
PR-URL: https://github.com/nodejs/node/pull/23938
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Notable changes:
* assert
* The diff output is now a tiny bit improved by sorting object
properties when inspecting the values that are compared with each
other. https://github.com/nodejs/node/pull/22788
* cli
* The options parser now normalizes `_` to `-` in all multi-word
command-line flags, e.g. `--no_warnings` has the same effect as
`--no-warnings`. https://github.com/nodejs/node/pull/23020
* Added bash completion for the `node` binary. To generate a bash
completion script, run `node --completion-bash`. The output can be
saved to a file which can be sourced to enable completion.
https://github.com/nodejs/node/pull/20713
* crypto
* Added support for PEM-level encryption.
https://github.com/nodejs/node/pull/23151
* Added an API asymmetric key pair generation. The new methods
`crypto.generateKeyPair` and `crypto.generateKeyPairSync` can be
used to generate public and private key pairs. The API supports
RSA, DSA and EC and a variety of key encodings (both PEM and DER).
https://github.com/nodejs/node/pull/22660
* fs
* Added a `recursive` option to `fs.mkdir` and `fs.mkdirSync`. If
this option is set to true, non-existing parent folders will be
automatically created. https://github.com/nodejs/node/pull/21875
* http2
* Added a `'ping'` event to `Http2Session` that is emitted whenever a
non-ack `PING` is received.
https://github.com/nodejs/node/pull/23009
* Added support for the `ORIGIN` frame.
https://github.com/nodejs/node/pull/22956
* Updated nghttp2 to 1.34.0. This adds RFC 8441 extended connect
protocol support to allow use of WebSockets over HTTP/2.
https://github.com/nodejs/node/pull/23284
* module
* Added `module.createRequireFromPath(filename)`. This new method can
be used to create a custom require function that will resolve
modules relative to the filename path.
https://github.com/nodejs/node/pull/19360
* process
* Added a `'multipleResolves'` process event that is emitted whenever
a `Promise` is attempted to be resolved multiple times, e.g. if the
`resolve` and `reject` functions are both called in a `Promise`
executor. https://github.com/nodejs/node/pull/22218
* url
* Added `url.fileURLToPath(url)` and `url.pathToFileURL(path)`. These
methods can be used to correctly convert between file: URLs and
absolute paths. https://github.com/nodejs/node/pull/22506
* util
* Added the `sorted` option to `util.inspect()`. If set to `true`,
all properties of an object and Set and Map entries will be sorted
in the returned string. If set to a function, it is used as a
compare function. https://github.com/nodejs/node/pull/22788
* The `util.instpect.custom` symbol is now defined in the global
symbol registry as `Symbol.for('nodejs.util.inspect.custom')`.
https://github.com/nodejs/node/pull/20857
* Added support for `BigInt` numbers in `util.format()`.
https://github.com/nodejs/node/pull/22097
* V8 API
* A number of V8 C++ APIs have been marked as deprecated since they
have been removed in the upstream repository. Replacement APIs
are added where necessary. https://github.com/nodejs/node/pull/23159
* Windows
* The Windows msi installer now provides an option to automatically
install the tools required to build native modules.
https://github.com/nodejs/node/pull/22645
* Workers
* Debugging support for Workers using the DevTools protocol has been
implemented. https://github.com/nodejs/node/pull/21364
* The public `inspector` module is now enabled in Workers.
https://github.com/nodejs/node/pull/22769
* Added new collaborators:
* digitalinfinity - Hitesh Kanwathirtha
PR-URL: https://github.com/nodejs/node/pull/23313
Allow reading from stdio streams that are conventionally
associated with process output, since this is only convention.
This involves disabling the oddness around closing stdio
streams. Its purpose is to prevent the file descriptors
0 through 2 from being closed, since doing so can lead
to information leaks when new file descriptors are being
opened; instead, not doing anything seems like a more
reasonable choice.
Fixes: https://github.com/nodejs/node/issues/21203
PR-URL: https://github.com/nodejs/node/pull/23053
Reviewed-By: James M Snell <jasnell@gmail.com>
Remove ERR_INDEX_OUT_OF_RANGE in favor of ERR_OUT_OF_RANGE which is
capable of providing more detail. (In one instance, use
ERR_BUFFER_OUT_OF_BOUNDS which is more accurate in that one instance.)
PR-URL: https://github.com/nodejs/node/pull/22969
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Weijia Wang <starkwang@126.com>
The current message says 'Port should be > 0' meaning '0' is an
invalid value. You can pass '0' to get a random port from the system.
The correct message for this error is 'Port should be >= 0'.
PR-URL: https://github.com/nodejs/node/pull/23015
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
This adds support for RSA, DSA and EC key pair generation with a
variety of possible output formats etc.
PR-URL: https://github.com/nodejs/node/pull/22660
Fixes: https://github.com/nodejs/node/issues/15116
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ujjwal Sharma <usharma1998@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Some nits were also fixed in passing.
PR-URL: https://github.com/nodejs/node/pull/22537
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
doc: Update child_process docs, stating typed arrays are allowed.
error: Update error message for `ERR_INVALID_SYNC_FORK_INPUT`
lib: Use isArrayBufferView instead of isUint8Array
test: Update test-child-process-spawnsync-input to test for all
typed arrays and data view.
PR-URL: https://github.com/nodejs/node/pull/22409
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
This change avoid an 'read ENOTCONN' error introduced by libuv 1.20.0
when trying to read from a TTY WriteStream. Instead, we are throwing
a more actionable ERR_TTY_WRITABLE_NOT_READABLE.
Fixes: https://github.com/nodejs/node/issues/21203
PR-URL: https://github.com/nodejs/node/pull/21654
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Shingo Inoue <leko.noor@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
At the last TC39 meeting, a new type of Module Records backed by
JavaScript source called Dynamic Module Records was discussed, and
it is now at Stage 1. Regardless of whether that proposal makes it
all the way into the spec, SourceTextModule is indeed a more
descriptive and accurate name for what this class represents.
PR-URL: https://github.com/nodejs/node/pull/22007
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Jan Krems <jan.krems@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Yuta Hiroto <hello@hiroppy.me>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: John-David Dalton <john.david.dalton@gmail.com>
Reviewed-By: Bradley Farias <bradley.meck@gmail.com>
ERR_TRANSFERRING_EXTERNALIZED_SHAREDARRAYBUFFER was missing from the
docs - add it there based on the wording Anna used in the her PR.
PR-URL: https://github.com/nodejs/node/pull/21947
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Minwoo Jung <minwoo@nodesource.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
We refer to them only as _error-first callbacks_ in our docs. We don't
call them _Node.js style callbacks_ so let's take this opporutnity to
keep things a bit more concise
PR-URL: https://github.com/nodejs/node/pull/21701
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
This restores a broken and erroneously removed error, which was
accidentially renamed to ERR_MISSING_DYNAMIC_INTSTANTIATE_HOOK (notice
the "INTST" vs "INST") in 921fb84687
(PR #16874) and then had documentation and implementation removed under
the old name in 6e1c25c456 (PR #18857),
as it appeared unused.
This error code never worked or was documented under the mistyped name
ERR_MISSING_DYNAMIC_INTSTANTIATE_HOOK, so renaming it back to
ERR_MISSING_DYNAMIC_INSTANTIATE_HOOK is a semver-patch fix.
Refs: https://github.com/nodejs/node/issues/21440
Refs: https://github.com/nodejs/node/pull/21470
Refs: https://github.com/nodejs/node/pull/16874
Refs: https://github.com/nodejs/node/pull/18857
PR-URL: https://github.com/nodejs/node/pull/21493
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ron Korving <ron@ronkorving.nl>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Bundle a `uv_async_t`, a `uv_idle_t`, a `uv_mutex_t`, a `uv_cond_t`,
and a `v8::Persistent<v8::Function>` to make it possible to call into JS
from another thread. The API accepts a void data pointer and a callback
which will be invoked on the loop thread and which will receive the
`napi_value` representing the JavaScript function to call so as to
perform the call into JS. The callback is run inside a
`node::CallbackScope`.
A `std::queue<void*>` is used to store calls from the secondary
threads, and an idle loop is started by the `uv_async_t` callback on the
loop thread to drain the queue, calling into JS with each item.
Items can be added to the queue blockingly or non-blockingly.
The thread-safe function can be referenced or unreferenced, with the
same semantics as libuv handles.
Re: https://github.com/nodejs/help/issues/1035
Re: https://github.com/nodejs/node/issues/20964
Fixes: https://github.com/nodejs/node/issues/13512
PR-URL: https://github.com/nodejs/node/pull/17887
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
This commit adds support for relative paths in Worker.
Paths are relative to the current working directory.
PR-URL: https://github.com/nodejs/node/pull/21407
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Guy Bedford <guybedford@gmail.com>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
ERR_HTTP2_ERROR and ERR_UNKNOWN_BUILTIN_MODULE error codes documentation
seem to have been accidentally removed in commit
1cdb41f287 (pull request #15160).
This reverts that removal, restoring the documentation for those two
error codes.
Those error codes are used from lib/ folder.
This is a part of the fixes hinted by #21470, which includes some tests
for error codes usage and documentation and enforces a stricter format.
PR-URL: https://github.com/nodejs/node/pull/21484
Refs: https://github.com/nodejs/node/pull/21470
Refs: https://github.com/nodejs/node/issues/21440
Refs: https://github.com/nodejs/node/pull/15160
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
A single exception is that ERR_HTTP2_* comes after ERR_HTTP_*.
Actual content not changed, just some blocks are moved around.
This is a part of the fixes hinted by #21470, which includes some tests
for error codes usage and documentation and enforces a stricter format.
PR-URL: https://github.com/nodejs/node/pull/21485
Refs: https://github.com/nodejs/node/pull/21470
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Only one error code was missing an appropriate anchor, and it was
ERR_SCRIPT_EXECUTION_TIMEOUT. This commit adds that missing anchor.
This is a part of the fixes hinted by #21470, which includes some tests
for error codes usage and documentation and enforces a stricter format.
PR-URL: https://github.com/nodejs/node/pull/21483
Refs: https://github.com/nodejs/node/pull/21470
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Use the scrypt() infrastructure to reimplement pbkdf2() in a simpler
manner.
PR-URL: https://github.com/nodejs/node/pull/20816
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Scrypt is a password-based key derivation function that is designed to
be expensive both computationally and memory-wise in order to make
brute-force attacks unrewarding.
OpenSSL has had support for the scrypt algorithm since v1.1.0. Add a
Node.js API modeled after `crypto.pbkdf2()` and `crypto.pbkdf2Sync()`.
Changes:
* Introduce helpers for copying buffers, collecting openssl errors, etc.
* Add new infrastructure for offloading crypto to a worker thread.
* Add a `AsyncWrap` JS class to simplify pbkdf2(), randomBytes() and
scrypt().
Fixes: https://github.com/nodejs/node/issues/8417
PR-URL: https://github.com/nodejs/node/pull/20816
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Remove spaces around slash characters in documentation. This change
sometimes rewords the content where the slash construction may not be
what is called for.
PR-URL: https://github.com/nodejs/node/pull/21140
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Implement multi-threading support for most of the API.
Thanks to Stephen Belanger for reviewing this change in its
original form, to Olivia Hugger for reviewing the
documentation and some of the tests coming along with it,
and to Alexey Orlenko and Timothy Gu for reviewing other
parts of the tests.
Refs: https://github.com/ayojs/ayo/pull/110
Refs: https://github.com/ayojs/ayo/pull/114
Refs: https://github.com/ayojs/ayo/pull/117
PR-URL: https://github.com/nodejs/node/pull/20876
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Shingo Inoue <leko.noor@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: John-David Dalton <john.david.dalton@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
Support passing `MessagePort` instances through other `MessagePort`s,
as expected by the `MessagePort` spec.
Thanks to Stephen Belanger for reviewing this change in its original PR.
Refs: https://github.com/ayojs/ayo/pull/106
PR-URL: https://github.com/nodejs/node/pull/20876
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Shingo Inoue <leko.noor@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: John-David Dalton <john.david.dalton@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
Implement `MessagePort` and `MessageChannel` along the lines of
the DOM classes of the same names. `MessagePort`s initially
support transferring only `ArrayBuffer`s.
Thanks to Stephen Belanger for reviewing this change in its
original form, to Benjamin Gruenbaum for reviewing the
added tests in their original form, and to Olivia Hugger
for reviewing the documentation in its original form.
Refs: https://github.com/ayojs/ayo/pull/98
PR-URL: https://github.com/nodejs/node/pull/20876
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Shingo Inoue <leko.noor@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: John-David Dalton <john.david.dalton@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
After https://github.com/nodejs/node/pull/20785, we wrap autogenerated
manpage links in code elements. This PR unify some hardcoded manpage
links with autogenerated ones: it adds backticks, parentheses, section
numbers, and updates URLs.
Also, some typos are fixes in passing (missing periods, reference
sorting).
PR-URL: https://github.com/nodejs/node/pull/20854
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
This error code is obsolete, since the error message from
ERR_OUT_OF_RANGE is more precise. It was only used a single time,
so I went ahead and replced this.
PR-URL: https://github.com/nodejs/node/pull/20484
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Some other formatting nits were fixed
and some superfluous descriptions were simplified in passing.
PR-URL: https://github.com/nodejs/node/pull/20401
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
This switches the url parser from `url.parse()` to the WHATWG URL
parser while keeping `url.parse()` as fallback.
Also add tests for invalid url deprecations and correct hostname
checks.
PR-URL: https://github.com/nodejs/node/pull/20270
Fixes: https://github.com/nodejs/node/issues/19468
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: Daijiro Wachi <daijiro.wachi@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
PR-URL: https://github.com/nodejs/node/pull/20293
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Migrate some methods from node.cc to JS in order to properly throw
errors with codes.
PR-URL: https://github.com/nodejs/node/pull/19973
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: James M Snell <jasnell@gmail.com>
Also modifies the error messages so they include more information
and are more consistent.
- The message of ERR_SCRIPT_EXECUTION_INTERRUPTED now mentions
SIGINT and the trailing period is dropped for consistency.
- Added ERR_SCRIPT_EXECUTION_TIMEOUT and include the timeout
in the message.
PR-URL: https://github.com/nodejs/node/pull/20147
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
This makes sure the returned value when calling `block` is actually
of type promise in case `assert.rejects` or `assert.doesNotReject`
is called.
PR-URL: https://github.com/nodejs/node/pull/19886
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
