1) If simple assert is called in the very first line of a file and
it causes an error, it used to report the wrong code. The reason
is that the column that is reported is faulty. This is fixed by
subtracting the offset from now on in such cases.
2) The actual code read is now limited to the part that is actually
required to visualize the call site. All other code in e.g. minified
files will not cause a significant overhead anymore.
3) The number of allocations is now significantly lower than it used
to be. The buffer is reused until the correct line in the code is
found. In general the algorithm tries to safe operations where
possible.
4) The indentation is now corrected depending on where the statement
actually beginns.
5) It is now possible to handle `.call()` and `.apply()` properly.
6) The user defined function name will now always be used instead of
only choosing either `assert.ok()` or `assert()`.
PR-URL: https://github.com/nodejs/node/pull/21626
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Ben Coe <bencoe@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
test-assert.js contains a test that writes to the source tree, requires
an internal module, and depends on modules not needed by the plethora of
other test cases in the file. Move it to its own file so that there are
not side effects in test-assert.js and so that it can be refactored to
not write to the source tree.
PR-URL: https://github.com/nodejs/node/pull/20861
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
When generating an assertion error message,
`filename` might be undefined,
e.g. if `assert` is called in `eval`.
Handle this case gracefully instead of failing with
`Cannot read property 'endsWith' of undefined`.
Fixes: https://github.com/nodejs/node/issues/20847
PR-URL: https://github.com/nodejs/node/pull/20848
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Khaidi Chu <i@2333.moe>
Reviewed-By: James M Snell <jasnell@gmail.com>
If code is read from a file and that code is indented, it would be
misaligned. This makes sure it has a natural indentation that is
relative to the starting point of the assertion.
PR-URL: https://github.com/nodejs/node/pull/20791
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Khaidi Chu <i@2333.moe>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Currently, assertion messages are implicitly converted to strings,
which causes symbols to throw. This commit adds an explicit
string conversion.
PR-URL: https://github.com/nodejs/node/pull/20693
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
When test/parallel/test-assert.js is run with a TTY as stdout,
color codes in assertion messages cause the test to fail. This
commit disables colors when stdout is a TTY.
Fixes: https://github.com/nodejs/node/issues/18967
PR-URL: https://github.com/nodejs/node/pull/20695
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This makes sure invalid `error` objects are not ignored when using
`assert.throws` and `assert.rejects`.
PR-URL: https://github.com/nodejs/node/pull/20481
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
This fixes some possible issues with `assert.throws` and
`assert.rejects` in combination with an validation object. It will
now properly handle primitive values being thrown as error.
It also makes sure the `generatedMessage` property is properly set
if `assert.throws` or `assert.rejects` is used in combination with
an validation object and improves the error performance in such cases
by only creating the error once.
In addition it will fix detecting regular expressions from a different
context such as n-api that are passed through as validator for
`assert.throws` or `assert.rejects`. Until now those were not tested.
PR-URL: https://github.com/nodejs/node/pull/20482
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
This moves the `assert` parts from `internal/errors` into an own
file. `internal/errors` got bigger and bigger and it was difficult
to keep a good overview of what was going on. While doing so it
also removes the `internalAssert` function and just lazy loads
`assert`.
PR-URL: https://github.com/nodejs/node/pull/20486
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
This makes sure regular expressions on validation objects validate
against strings when used with `assert.throws` and `assert.rejects`.
PR-URL: https://github.com/nodejs/node/pull/20485
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
This improves the error messages for:
- assert.notDeepStrictEqual
- assert.deepStrictEqual
- assert.notStrictEqual
- assert.strictEqual
Those will now always use the same error message as used in the
strict mode.
PR-URL: https://github.com/nodejs/node/pull/19467
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This makes sure the actual and expected values on the error thrown
by `assert.throws` etc. are always as they should be.
PR-URL: https://github.com/nodejs/node/pull/19925
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
One of the biggest downsides to the `assert.throws` API is that it
does not check for the error message in case that is used as second
argument. It will instead be used in case no error is thrown.
This improves the situation by checking the actual error message
against the provided one and throws an error in case they are
identical. It is very unlikely that the user wants to use that error
message as information instead of checking against that message.
PR-URL: https://github.com/nodejs/node/pull/19867
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
In case a error is caught in `assert.doesNotThrow` or
`assert.doesNotReject` it will now also indicate what the real
error message was.
PR-URL: https://github.com/nodejs/node/pull/19884
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
`assert.throws` also accepts objects and errors as input. This fixes
the error message accodingly.
PR-URL: https://github.com/nodejs/node/pull/19865
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
The color output was broken at some point and that was not detected
because it was not tested for properly so far. This makes sure the
colors work again and it adds a regression test as well.
PR-URL: https://github.com/nodejs/node/pull/19464
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
This switches the assert.throws output to the one used in strict mode
if a error object is used for comparison. From now on it will show
the complete difference between two objects instead of only showing
the first failing property.
It also fixes detecting properties with a undefined value and fails
in case the thrown error does not contain the value at all.
PR-URL: https://github.com/nodejs/node/pull/19463
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This makes a effort to make sure all of these errors will actually
also show the received input.
On top of that it refactors a few tests for better maintainability.
It will also change the returned type to always be a simple typeof
instead of special handling null.
PR-URL: https://github.com/nodejs/node/pull/19445
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Prohibit the usage of `assert.doesNotThrow()`.
PR-URL: https://github.com/nodejs/node/pull/18669
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
There is actually no reason to use `assert.doesNotThrow()` in the
tests. If a test throws, just let the error bubble up right away
instead of first catching it and then rethrowing it.
PR-URL: https://github.com/nodejs/node/pull/18669
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Right now it is possible to get an AssertionError from input that has
the customInspect function set to always return the same value.
That way the error message is actually misleading because the output
is going to look the same. This fixes it by deactivating the custom
inspect function.
PR-URL: https://github.com/nodejs/node/pull/18611
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
In rare cirumstances it is possible to get a identical error diff.
In such a case the advances diffing runs into a infinite loop.
This fixes it by properly checking for extra entries.
PR-URL: https://github.com/nodejs/node/pull/18611
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
This adds puctiations to the comments, uses a capital letters for
the first character, removes a few obsolete comments and switches
to assert.ok when suitable.
It also moves all `assert.deepEqual()` and `assert.deepStrictEqual()`
tests to the appropriate file.
PR-URL: https://github.com/nodejs/node/pull/18610
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
The generatedMessage was wrong in case simple assert was used and
a message was auto generated. This fixed the TODO.
PR-URL: https://github.com/nodejs/node/pull/18322
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Prevent reading a Node.js module. That could theoretically lead to
false errors being thrown otherwise.
PR-URL: https://github.com/nodejs/node/pull/18322
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
In case no arguments are passed to `assert.ok` it should just
use a default message. Otherwise `assert.ok` can not be used as
a callback.
PR-URL: https://github.com/nodejs/node/pull/18319
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Weijia Wang <starkwang@126.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
It is hard to know where ifError is actually triggered due to the
original error being thrown.
This changes it by wrapping the original error in a AssertionError.
This has the positive effect of also making clear that it is indeed
a assertion function that triggered that error.
The original stack can still be accessed by checking the `actual`
property.
PR-URL: https://github.com/nodejs/node/pull/18247
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Right now it is very difficult to determine if a terminal supports
colors or not. This function adds this functionality by detecting
environment variables and checking process.
PR-URL: https://github.com/nodejs/node/pull/17615
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
From now on all error messages produced by `assert` in strict mode
will produce a error diff.
PR-URL: https://github.com/nodejs/node/pull/17615
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
`assert.ok()` should always receive a value. Otherwise there
might be a bug or it was intended to use `assert.fail()`.
PR-URL: https://github.com/nodejs/node/pull/17581
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ron Korving <ron@ronkorving.nl>
This improves the error message in simple asserts by using the
real call information instead of the already evaluated part.
PR-URL: https://github.com/nodejs/node/pull/17581
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ron Korving <ron@ronkorving.nl>
And make `assert.doesNotThrow()` handle it as well.
PR-URL: https://github.com/nodejs/node/pull/18029
Fixes: https://github.com/nodejs/node/issues/18027
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Khaidi Chu <i@2333.moe>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/17924
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
From now on it is possible to use a validation object in throws
instead of the other possibilites.
PR-URL: https://github.com/nodejs/node/pull/17584
Refs: https://github.com/nodejs/node/pull/17557
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Ron Korving <ron@ronkorving.nl>
Reviewed-By: Yuta Hiroto <hello@about-hiroppy.com>
Throw a TypeError in case a error message is provided in the second
argument and a third argument is present as well.
This is clearly a mistake and should not be done.
PR-URL: https://github.com/nodejs/node/pull/17585
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Evan Lucas <evanlucas@me.com>
A combination of try catch and common.expectsError is not necessary
as the latter already does everything on its own.
PR-URL: https://github.com/nodejs/node/pull/17703
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
The stack frames from .throws and .doesNotThrow got included
even though that was not intended.
PR-URL: https://github.com/nodejs/node/pull/17703
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Right now it is difficult to know what argument stands for what
property. By refactoring the arguments into a object it is clear
what stands for what.
PR-URL: https://github.com/nodejs/node/pull/17582
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
assert.throws and assert.doesNotThrow set the operator to a
internal function. That was by accident and originally the operator
was undefined. This changes it to show "throws" or "doesNotThrow".
PR-URL: https://github.com/nodejs/node/pull/17575
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
1. Among the list of Code and Learn,
I solved the unfinished task of replacing function with arrow function:
https://github.com/nodejs/code-and-learn/issues/72#issuecomment-345667395
2. Replace arrow function with shorter property syntax
Arrow function makes `this` lexical scope.
But toString expects evaluate `this` in runtime.
3. Replace this with null
makeBlock does not need `this`.
update `this` with `null` to clarify the intent.
PR-URL: https://github.com/nodejs/node/pull/17345
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: Yosuke Furukawa <yosuke.furukawa@gmail.com>
Requireing the strict version will allow to use `assert.equal`,
`assert.deepEqual` and there negated counterparts to be used with
strict comparison instead of using e.g. `assert.strictEqual`.
The API is identical to the regular assert export and only differs
in the way that all functions use strict compairson.
PR-URL: https://github.com/nodejs/node/pull/17002
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
This aligns assert.strictEqual and assert.notStrictEqual with
assert.deepStrictEqual to use the Object.is() comparison instead
of strict equality.
PR-URL: https://github.com/nodejs/node/pull/17003
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
The initials of expected in TypeError[ERR_INVALID_ARG_TYPE]
are inconsistent. This change is to unify them.
PR-URL: https://github.com/nodejs/node/pull/16401
Fixes: https://github.com/nodejs/node/issues/16383
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
