Some core modules can be loaded with or without the `node:` prefix.
Using the prefix disambiguates which specifiers refer to core modules.
This commit updates the docs to use the prefix everywhere a core module
is referenced.
PR-URL: https://github.com/nodejs/node/pull/42752
Fixes: https://github.com/nodejs/node/issues/38343
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Mestery <mestery@protonmail.com>
Reviewed-By: Darshan Sen <raisinten@gmail.com>
Reviewed-By: Akhil Marsonya <akhil.marsonya27@gmail.com>
Reviewed-By: Rafael Gonzaga <rafael.nunu@hotmail.com>
Reviewed-By: Mohammed Keyvanzadeh <mohammadkeyvanzade94@gmail.com>
Reviewed-By: Geoffrey Booth <webadmin@geoffreybooth.com>
Reviewed-By: Stephen Belanger <admin@stephenbelanger.com>
Notable Changes:
Deprecations and Removals:
- (SEMVER-MAJOR) fs: runtime deprecate string coercion in `fs.write`,
`fs.writeFileSync`
(Livia Medeiros) (https://github.com/nodejs/node/pull/42607)
- (SEMVER-MAJOR) dns: remove `dns.lookup` and `dnsPromises.lookup`
options type coercion
(Antoine du Hamel) (https://github.com/nodejs/node/pull/41431)
- (SEMVER-MAJOR) process: runtime deprecate multipleResolves
(Benjamin Gruenbaum) (https://github.com/nodejs/node/pull/41896)
- (SEMVER-MAJOR) stream: remove thenable support (Robert Nagy)
(https://github.com/nodejs/node/pull/40773)
- (SEMVER-MAJOR) tls: move tls.parseCertString to end-of-life
(Tobias Nießen) (https://github.com/nodejs/node/pull/41479)
fetch (experimental):
An experimental fetch API is available on the global scope by default.
The implementation is based upon https://undici.nodejs.org/#/,
an HTTP/1.1 client written for Node.js by contributors to the project.
Through this addition, the following globals are made available: `fetch`
, `FormData`, `Headers`, `Request`, `Response`.
Disable this API with the `--no-experimental-fetch` command-line flag.
Contributed by Michaël Zasso in https://github.com/nodejs/node/pull/41811.
HTTP Timeouts:
`server.headersTimeout`, which limits the amount of time the parser will
wait to receive the complete HTTP headers, is now set to `60000` (60
seconds) by default.
`server.requestTimeout`, which sets the timeout value in milliseconds
for receiving the entire request from the client, is now set to `300000`
(5 minutes) by default.
If these timeouts expire, the server responds with status 408 without
forwarding the request to the request listener and then closes the
connection.
Both timeouts must be set to a non-zero value to protect against
potential Denial-of-Service attacks in case the server is deployed
without a reverse proxy in front.
Contributed by Paolo Insogna in https://github.com/nodejs/node/pull/41263.
Test Runner module (experimental):
The `node:test` module facilitates the creation of JavaScript tests that
report results in TAP format. This module is only available under the
`node:` scheme.
Contributed by Colin Ihrig in https://github.com/nodejs/node/pull/42325.
Toolchain and Compiler Upgrades:
- Prebuilt binaries for Linux are now built on Red Hat Enterprise Linux
(RHEL) 8 and are compatible with Linux distributions based on glibc
2.28 or later, for example, Debian 10, RHEL 8, Ubuntu 20.04.
- Prebuilt binaries for macOS now require macOS 10.15 or later.
- For AIX the minimum supported architecture has been raised from Power
7 to Power 8.
Prebuilt binaries for 32-bit Windows will initially not be available due
to issues building the V8 dependency in Node.js. We hope to restore
32-bit Windows binaries for Node.js 18 with a future V8 update.
Node.js does not support running on operating systems that are no longer
supported by their vendor. For operating systems where their vendor has
planned to end support earlier than April 2025, such as Windows 8.1
(January 2023) and Windows Server 2012 R2 (October 2023), support for
Node.js 18 will end at the earlier date.
Full details about the supported toolchains and compilers are documented
in the Node.js `BUILDING.md` file.
Contributed by Richard Lau in https://github.com/nodejs/node/pull/42292,
https://github.com/nodejs/node/pull/42604 and https://github.com/nodejs/node/pull/42659
, and Michaël Zasso in https://github.com/nodejs/node/pull/42105 and
https://github.com/nodejs/node/pull/42666.
V8 10.1:
The V8 engine is updated to version 10.1, which is part of Chromium 101.
Compared to the version included in Node.js 17.9.0, the following new
features are included:
- The `findLast` and `findLastIndex` array methods.
- Improvements to the `Intl.Locale` API.
- The `Intl.supportedValuesOf` function.
- Improved performance of class fields and private class methods (the
initialization of them is now as fast as ordinary property stores).
The data format returned by the serialization API (`v8.serialize(value)`)
has changed, and cannot be deserialized by earlier versions of Node.js.
On the other hand, it is still possible to deserialize the previous
format, as the API is backwards-compatible.
Contributed by Michaël Zasso in https://github.com/nodejs/node/pull/42657.
Web Streams API (experimental):
Node.js now exposes the experimental implementation of the Web Streams
API on the global scope. This means the following APIs are now globally
available:
- `ReadableStream`, `ReadableStreamDefaultReader`,
`ReadableStreamBYOBReader`, `ReadableStreamBYOBRequest`,
`ReadableByteStreamController`, `ReadableStreamDefaultController`,
`TransformStream`, `TransformStreamDefaultController`, `WritableStream`,
`WritableStreamDefaultWriter`, `WritableStreamDefaultController`,
`ByteLengthQueuingStrategy`, `CountQueuingStrategy`, `TextEncoderStream`,
`TextDecoderStream`, `CompressionStream`, `DecompressionStream`.
Contributed James Snell in https://github.com/nodejs/node/pull/39062,
and Antoine du Hamel in https://github.com/nodejs/node/pull/42225.
Other Notable Changes:
- (SEMVER-MAJOR) buffer: expose Blob as a global
(James M Snell) (https://github.com/nodejs/node/pull/41270)
- (SEMVER-MAJOR) child\_process: improve argument validation
(Rich Trott) (https://github.com/nodejs/node/pull/41305)
- doc: add RafaelGSS to collaborators
(RafaelGSS) (https://github.com/nodejs/node/pull/42718)
- (SEMVER-MAJOR) http: make TCP noDelay enabled by default
(Paolo Insogna) (https://github.com/nodejs/node/pull/42163)
- (SEMVER-MAJOR) net: make `server.address()` return an integer for
`family`
(Antoine du Hamel) (https://github.com/nodejs/node/pull/41431)
- (SEMVER-MAJOR) worker: expose BroadcastChannel as a global
(James M Snell) (https://github.com/nodejs/node/pull/41271)
- (SEMVER-MAJOR) worker: graduate BroadcastChannel to supported
(James M Snell) (https://github.com/nodejs/node/pull/41271)
Semver-Major Commits:
- (SEMVER-MAJOR) assert,util: compare RegExp.lastIndex while using deep
equal checks
(Ruben Bridgewater) (https://github.com/nodejs/node/pull/41020)
- (SEMVER-MAJOR) buffer: refactor `byteLength` to remove outdated
optimizations
(Rongjian Zhang) (https://github.com/nodejs/node/pull/38545)
- (SEMVER-MAJOR) buffer: expose Blob as a global
(James M Snell) (https://github.com/nodejs/node/pull/41270)
- (SEMVER-MAJOR) buffer: graduate Blob from experimental
(James M Snell) (https://github.com/nodejs/node/pull/41270)
- (SEMVER-MAJOR) build: make x86 Windows support temporarily
experimental
(Michaël Zasso) (https://github.com/nodejs/node/pull/42666)
- (SEMVER-MAJOR) build: bump macOS deployment target to 10.15
(Richard Lau) (https://github.com/nodejs/node/pull/42292)
- (SEMVER-MAJOR) build: downgrade Windows 8.1 and server 2012 R2 to
experimental
(Michaël Zasso) (https://github.com/nodejs/node/pull/42105)
- (SEMVER-MAJOR) child\_process: improve argument validation
(Rich Trott) (https://github.com/nodejs/node/pull/41305)
- (SEMVER-MAJOR) cluster: make `kill` to be just `process.kill`
(Bar Admoni) (https://github.com/nodejs/node/pull/34312)
- (SEMVER-MAJOR) crypto: cleanup validation
(Mohammed Keyvanzadeh) (https://github.com/nodejs/node/pull/39841)
- (SEMVER-MAJOR) crypto: prettify othername in PrintGeneralName
(Tobias Nießen) (https://github.com/nodejs/node/pull/42123)
- (SEMVER-MAJOR) crypto: fix X509Certificate toLegacyObject
(Tobias Nießen) (https://github.com/nodejs/node/pull/42124)
- (SEMVER-MAJOR) crypto: use RFC2253 format in PrintGeneralName
(Tobias Nießen) (https://github.com/nodejs/node/pull/42002)
- (SEMVER-MAJOR) crypto: change default check(Host|Email) behavior
(Tobias Nießen) (https://github.com/nodejs/node/pull/41600)
- (SEMVER-MAJOR) deps: V8: cherry-pick semver-major commits from 10.2
(Michaël Zasso) (https://github.com/nodejs/node/pull/42657)
- (SEMVER-MAJOR) deps: update V8 to 10.1.124.6
(Michaël Zasso) (https://github.com/nodejs/node/pull/42657)
- (SEMVER-MAJOR) deps: update V8 to 9.8.177.9
(Michaël Zasso) (https://github.com/nodejs/node/pull/41610)
- (SEMVER-MAJOR) deps: update V8 to 9.7.106.18
(Michaël Zasso) (https://github.com/nodejs/node/pull/40907)
- (SEMVER-MAJOR) dns: remove `dns.lookup` and `dnsPromises.lookup`
options type coercion
(Antoine du Hamel) (https://github.com/nodejs/node/pull/41431)
- (SEMVER-MAJOR) doc: update minimum glibc requirements for Linux
(Richard Lau) (https://github.com/nodejs/node/pull/42659)
- (SEMVER-MAJOR) doc: update AIX minimum supported arch
(Richard Lau) (https://github.com/nodejs/node/pull/42604)
- (SEMVER-MAJOR) fs: runtime deprecate string coercion in `fs.write`,
`fs.writeFileSync`
(Livia Medeiros) (https://github.com/nodejs/node/pull/42607)
- (SEMVER-MAJOR) http: refactor headersTimeout and requestTimeout logic
(Paolo Insogna) (https://github.com/nodejs/node/pull/41263)
- (SEMVER-MAJOR) http: make TCP noDelay enabled by default
(Paolo Insogna) (https://github.com/nodejs/node/pull/42163)
- (SEMVER-MAJOR) lib: enable fetch by default
(Michaël Zasso) (https://github.com/nodejs/node/pull/41811)
- (SEMVER-MAJOR) lib: replace validator and error
(Mohammed Keyvanzadeh) (https://github.com/nodejs/node/pull/41678)
- (SEMVER-MAJOR) module,repl: support 'node:'-only core modules
(Colin Ihrig) (https://github.com/nodejs/node/pull/42325)
- (SEMVER-MAJOR) net: make `server.address()` return an integer for
`family`
(Antoine du Hamel) (https://github.com/nodejs/node/pull/41431)
- (SEMVER-MAJOR) process: disallow some uses of Object.defineProperty()
on process.env
(Himself65) (https://github.com/nodejs/node/pull/28006)
- (SEMVER-MAJOR) process: runtime deprecate multipleResolves
(Benjamin Gruenbaum) (https://github.com/nodejs/node/pull/41896)
- (SEMVER-MAJOR) readline: fix question still called after closed
(Xuguang Mei) (https://github.com/nodejs/node/pull/42464)
- (SEMVER-MAJOR) stream: remove thenable support
(Robert Nagy) (https://github.com/nodejs/node/pull/40773)
- (SEMVER-MAJOR) stream: expose web streams globals, remove runtime
experimental warning
(Antoine du Hamel) (https://github.com/nodejs/node/pull/42225)
- (SEMVER-MAJOR) stream: need to cleanup event listeners if last stream
is readable
(Xuguang Mei) (https://github.com/nodejs/node/pull/41954)
- (SEMVER-MAJOR) stream: revert revert `map` spec compliance
(Benjamin Gruenbaum) (https://github.com/nodejs/node/pull/41933)
- (SEMVER-MAJOR) stream: throw invalid arg type from End Of Stream
(Jithil P Ponnan) (https://github.com/nodejs/node/pull/41766)
- (SEMVER-MAJOR) stream: don't emit finish after destroy
(Robert Nagy) (https://github.com/nodejs/node/pull/40852)
- (SEMVER-MAJOR) stream: add errored and closed props
(Robert Nagy) (https://github.com/nodejs/node/pull/40696)
- (SEMVER-MAJOR) test: add initial test module
(Colin Ihrig) (https://github.com/nodejs/node/pull/42325)
- (SEMVER-MAJOR) timers: refactor internal classes to ES2015 syntax
(Rabbit) (https://github.com/nodejs/node/pull/37408)
- (SEMVER-MAJOR) tls: represent registeredID numerically always
(Tobias Nießen) (https://github.com/nodejs/node/pull/41561)
- (SEMVER-MAJOR) tls: move tls.parseCertString to end-of-life
(Tobias Nießen) (https://github.com/nodejs/node/pull/41479)
- (SEMVER-MAJOR) url: throw on NULL in IPv6 hostname
(Rich Trott) (https://github.com/nodejs/node/pull/42313)
- (SEMVER-MAJOR) v8: make v8.writeHeapSnapshot() error codes consistent
(Darshan Sen) (https://github.com/nodejs/node/pull/42577)
- (SEMVER-MAJOR) v8: make writeHeapSnapshot throw if fopen fails
(Antonio Román) (https://github.com/nodejs/node/pull/41373)
- (SEMVER-MAJOR) worker: expose BroadcastChannel as a global
(James M Snell) (https://github.com/nodejs/node/pull/41271)
- (SEMVER-MAJOR) worker: graduate BroadcastChannel to supported
(James M Snell) (https://github.com/nodejs/node/pull/41271)
PR-URL: https://github.com/nodejs/node/pull/42262
use the perf_hooks to trace the time spent by net.connect, dns.lookup,
dns.lookupService, dns.resolvexxx.
PR-URL: https://github.com/nodejs/node/pull/42390
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Paolo Insogna <paolo@cowtech.it>
Reviewed-By: Mohammed Keyvanzadeh <mohammadkeyvanzade94@gmail.com>
Property name `min` was updated in 23637e9a3b
to `lowest` but an instance of `min` was missed.
PR-URL: https://github.com/nodejs/node/pull/42398
Reviewed-By: Richard Lau <rlau@redhat.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Mestery <mestery@protonmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Harshitha K P <harshitha014@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/42018
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Mohammed Keyvanzadeh <mohammadkeyvanzade94@gmail.com>
* The createHistogram(options) options weren't actually implemented
* Add a new count property that tracks the number of samples
* Adds BigInt options for relevant properties
* Adds add(other) method for RecordableHistogram
* Cleans up and expands tests
* Eliminates unnecessary ELDHistogram native class
* Improve/Simplify histogram transfer impl
Signed-off-by: James M Snell <jasnell@gmail.com>
perf_hooks: simplify Histogram constructor options
Signed-off-by: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/41153
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/40403
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Zijian Liu <lxxyxzj@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Antoine du Hamel <duhamelantoine1995@gmail.com>
Main changes:
- Replace current HTML anchor generation to match
header anchor generation in Github markdown.
- Remove unnecessary double namespacing on generated anchors/links (E.G.
`esm.md#loaders` instead of `esm.md#esm_loaders`).
- Anchors/links are automatically prefixed with their respective modules
when concatenated for usage in `all.html`.
Benefits:
- All anchor links within and between markdown API docs actually work.
- Adding new anchor links no longer requires contributors to generate
the HTML docs first to look up the correct anchors.
- Anchors are much shorter.
- All previous anchor links are preserved by generating hidden legacy
anchors.
PR-URL: https://github.com/nodejs/node/pull/39304
Reviewed-By: Antoine du Hamel <duhamelantoine1995@gmail.com>
Allows setting a `Histogram` object option on timerify to
record function execution times over time.
Signed-off-by: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/37475
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
* Update the user timing implementation to conform to
User Timing Level 3.
* Reimplement user timing and timerify with pure JavaScript
implementations
* Simplify the C++ implementation for gc and http2 perf
* Runtime deprecate additional perf entry properties
in favor of the standard detail argument
* Disable the `buffered` option on PerformanceObserver,
all entries are queued and dispatched on setImmediate.
Only entries with active observers are buffered.
* This does remove the user timing and timerify
trace events. Because the trace_events are still
considered experimental, those can be removed without
a deprecation cycle. They are removed to improve
performance and reduce complexity.
Old: `perf_hooks/usertiming.js n=100000: 92,378.01249733355`
New: perf_hooks/usertiming.js n=100000: 270,393.5280638482`
PR-URL: https://github.com/nodejs/node/pull/37136
Refs: https://github.com/nodejs/diagnostics/issues/464
Reviewed-By: Antoine du Hamel <duhamelantoine1995@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
It seems that **Default:** was unofficially decided on as
the way to specify default values. This commit updates the API
documentation to use this format more consistently.
PR-URL: https://github.com/nodejs/node/pull/37387
Reviewed-By: Antoine du Hamel <duhamelantoine1995@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Pooja D P <Pooja.D.P@ibm.com>
Reviewed-By: Darshan Sen <raisinten@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/37274
Reviewed-By: Antoine du Hamel <duhamelantoine1995@gmail.com>
Reviewed-By: Darshan Sen <raisinten@gmail.com>
Reviewed-By: Zijian Liu <lxxyxzj@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Adds a new `perf_hooks.createHistogram()` API for creating histogram
instances that allow user recording.
Makes Histogram instances cloneable via MessagePort. This allows, for
instance, an event loop delay monitor to be running on the main thread
while the histogram data can be monitored actively from a worker thread.
Signed-off-by: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/37155
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
The value accepted by histogram.percentile may be below 1 too.
PR-URL: https://github.com/nodejs/node/pull/36938
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Antoine du Hamel <duhamelantoine1995@gmail.com>
Allow calling eventLoopUtilization() directly on a worker thread:
const worker = new Worker('./foo.js');
const elu = worker.performance.eventLoopUtilization();
setTimeout(() => {
worker.performance.eventLoopUtilization(elu);
}, 10);
Add a new performance object on the Worker instance that will hopefully
one day hold all the other performance metrics, such as nodeTiming.
Include benchmarks and tests.
PR-URL: https://github.com/nodejs/node/pull/35664
Reviewed-By: Juan José Arboleda <soyjuanarbol@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Gerhard Stöbich <deb2001-github@yahoo.de>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/35479
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Harshitha K P <harshitha014@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Daijiro Wachi <daijiro.wachi@gmail.com>
This helps catch broken links as part of the test suite. This also
improves the user experience when browsing the markdown files.
PR-URL: https://github.com/nodejs/node/pull/35191
Fixes: https://github.com/nodejs/node/issues/35189
Reviewed-By: Derek Lewis <DerekNonGeneric@inf.is>
Reviewed-By: Jiawen Geng <technicalcute@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Entries in perf_hooks.md are almost-but-not-quite in alphabetical order.
Our docs (usually) list things in alphabetical order, so move a few
entries to make it so in perf_hooks.md.
PR-URL: https://github.com/nodejs/node/pull/34973
Reviewed-By: Gerhard Stöbich <deb2001-github@yahoo.de>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Harshitha K P <harshitha014@gmail.com>
Use uv_metrics_idle_time() to return a high resolution millisecond timer
of the amount of time the event loop has been idle since it was
initialized.
Include performance.eventLoopUtilization() API to handle the math of
calculating the idle and active times. This has been added to prevent
accidental miscalculations of the event loop utilization. Such as not
taking into consideration offsetting nodeTiming.loopStart or timing
differences when being called from a Worker thread.
PR-URL: https://github.com/nodejs/node/pull/34938
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Adrian Estrada <edsadr@gmail.com>
Reviewed-By: Juan José Arboleda <soyjuanarbol@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Stephen Belanger <admin@stephenbelanger.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Gerhard Stöbich <deb2001-github@yahoo.de>
The docs use `* Extends: {type}` to define inheritance. This
commit updates the perf_hooks documentation to be consistent.
PR-URL: https://github.com/nodejs/node/pull/33777
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Notable changes:
* ECMAScript Modules - `--experimental-modules` flag removal
* AsyncLocalStorage API (experimental)
* REPL previews
* REPL reverse-i-search
* REPL substring-based search
* Error monitoring
* Monitoring `error` events
* Monitoring uncaught exceptions
* File system APIs
* New function: `fs.readv`
* Optional parameters in `fs.read`
* Console `groupIndentation` option
* `maxStringLength` option for `util.inspect()`
* Stable N-API release 6
* Stable diagnostic reports
* Increase of the default server headers timeout
* New `--trace-sigint` CLI flag
* Various crypto APIs now support Diffie-Hellman secrets
* Added support for the `dns.ALL` flag in `dns.lookup()`
* Added a new experimental API to interact with Source Map V3 data
* Added support for passing a `transferList` along with `workerData` to
the `Worker` constructor
PR-URL: https://github.com/nodejs/node/pull/33197
- Add clarifications for Node.js-only extensions
- Explain the Web Performance APIs implemented in Node.js and
clarify that perf_hooks also include other non-Web APIs.
- Prefix exposed interfaces with `perf_hooks.` to distinguish
them from internal classes.
PR-URL: https://github.com/nodejs/node/pull/33199
Refs: https://github.com/nodejs/node/issues/28635
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Chengzhong Wu <legendecas@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
