Refactor the C++ code for creating `MessagePort`s to skip calling the
constructor and instead directly instantiating the `InstanceTemplate`,
and always throw an error from the `MessagePort` constructor.
This aligns behaviour with the web, and creating single `MessagePort`s
does not make sense anyway.
PR-URL: https://github.com/nodejs/node/pull/28032
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Using `assert.throws()` or `assert.rejects()` in combination with
validation function can be very powerful. Using them by returning
any value besides `true` makes debugging very difficult though
because there's no context or reason why the error validation failed.
Thus, it is recommended to throw an error in such cases instead of
returning anything besides `true`.
PR-URL: https://github.com/nodejs/node/pull/27781
Reviewed-By: Rich Trott <rtrott@gmail.com>
As implemented in https://github.com/nodejs/node/pull/21840, dns can
emit trace events when the category is enabled. This PR just add
it to the documentation.
PR-URL: https://github.com/nodejs/node/pull/28100
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This commit add the --tls-min and --tls-max command line options to the
list of allowed options for the NODE_OPTIONS environment variable.
PR-URL: https://github.com/nodejs/node/pull/28146
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
This makes sure the "good" and "bad" examples are split into two.
Otherwise it'll result in an parse error.
PR-URL: https://github.com/nodejs/node/pull/27670
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Refael Ackermann (רפאל פלחי) <refack@gmail.com>
Reviewed-By: Daijiro Wachi <daijiro.wachi@gmail.com>
Reviewed-By: Ujjwal Sharma <usharma1998@gmail.com>
I was asked by a community member if they needed to
recompile for v12.x based on the version matrix. Add
additional context to help ensure it is clear that this
is not the case.
PR-URL: https://github.com/nodejs/node/pull/27942
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Beth Griggs <Bethany.Griggs@uk.ibm.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Christopher Hiller <boneskull@boneskull.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
When implementing a pool for Worker threads, the correlation between
posting tasks and getting their results may get lost, depending on
the implementation.
The `AsyncResource` API is the primary way to solve that issue,
so link it from the recommendation in the worker docs.
(This was brought up at the collaborator summit in Berlin.)
PR-URL: https://github.com/nodejs/node/pull/28023
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Many small improvements to synopsis.md to make it more concise, more
clear, and more correct (punctuation, etc.).
PR-URL: https://github.com/nodejs/node/pull/28115
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Beth Griggs <Bethany.Griggs@uk.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
It's not clear (to me, at least) how describing an API as "considered
to be unsafe" differs from describing it as simply "unsafe". Use the
shorter, latter wording.
PR-URL: https://github.com/nodejs/node/pull/28098
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
Edit text for "DEP0090: Invalid GCM authentication tag lengths" for
clarity and branding. Invalid langths are "invalid" rather than
"considered invalid". Refer to "Node.js v11.0.0" rather than "node
v11.0.0".
PR-URL: https://github.com/nodejs/node/pull/28097
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Beth Griggs <Bethany.Griggs@uk.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Describe small key sizes as "too weak for safe use" rather than
"considered to be too weak for safe use".
PR-URL: https://github.com/nodejs/node/pull/28090
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
It is debatable whether "it is considered good style" in Node.js to use
hypens or underscores to separate words in file names. Node.js has
little to say about that. Remove that material as it is superfluous.
PR-URL: https://github.com/nodejs/node/pull/28089
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Beth Griggs <Bethany.Griggs@uk.ibm.com>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Notable changes:
* doc:
* The JSON variant of the API documentation is no longer experimental
(Rich Trott) https://github.com/nodejs/node/pull/27842.
* esm:
* JSON module support is always enabled under
`--experimental-modules`. The `--experimental-json-modules` flag
has been removed (Myles Borins)
https://github.com/nodejs/node/pull/27752.
* http,http2:
* A new flag has been added for overriding the default HTTP server
socket timeout (which is two minutes). Pass
`--http-server-default-timeout=milliseconds`
or `--http-server-default-timeout=0` to respectively change or
disable the timeout. Starting with Node.js 13.0.0, the timeout will
be disabled by default
(Ali Ijaz Sheikh) https://github.com/nodejs/node/pull/27704.
* inspector:
* Added an experimental `--heap-prof` flag to start the V8 heap
profiler on startup and write the heap profile to disk before exit
(Joyee Cheung) https://github.com/nodejs/node/pull/27596.
* stream:
* The `readable.unshift()` method now correctly converts strings to
buffers. Additionally, a new optional argument is accepted to
specify the string's encoding, such as `'utf8'` or `'ascii'`
(Marcos Casagrande) https://github.com/nodejs/node/pull/27194.
* v8:
* The object returned by `v8.getHeapStatistics()` has two new
properties: `number_of_native_contexts` and
`number_of_detached_contexts` (Yuriy Vasiyarov)
https://github.com/nodejs/node/pull/27933.
PR-URL: https://github.com/nodejs/node/pull/28040
This flag specifies how inspector websocket url should be reported.
Tthre options are supported:
- stderr - reports websocket as a message to stderr,
- http - exposes /json/list endpoint that contains inspector websocket
url,
- binding - require('inspector').url().
Related discussion: https://github.com/nodejs/diagnostics/issues/303
PR-URL: https://github.com/nodejs/node/pull/27741
Reviewed-By: Eugene Ostroukhov <eostroukhov@google.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
`readable.unshift` can take a string as an argument, but that
string wasn't being converted to a Buffer, which caused a
<TypeError: Argument must be a buffer> in some cases. Also if a
string was passed, that string was coerced to utf8 encoding.
A second optional argument `encoding` was added to `unshift` to
fix the encoding issue.
Fixes: https://github.com/nodejs/node/issues/27192
PR-URL: https://github.com/nodejs/node/pull/27194
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Warn about using the bahvior where file handles are closed automatically
when the file is closed.
PR-URL: https://github.com/nodejs/node/pull/27972
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
This commit moves DEP0129 to a runtime deprecation.
PR-URL: https://github.com/nodejs/node/pull/27949
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This commit moves DEP0130 to a runtime deprecation.
PR-URL: https://github.com/nodejs/node/pull/27951
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Revoked deprecations are supposed to have some sort of
information explaining why the deprecation was reversed. This
commit adds some information to the two existing revoked
deprecations.
PR-URL: https://github.com/nodejs/node/pull/27952
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
export number_of_native_contexts and number_of_detached_contexts as
part of v8.getHeapStatistics()
PR-URL: https://github.com/nodejs/node/pull/27933
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Correct docs to clarify that behaviour,
and fix a race condition in test-http2-large-write-destroy.js.
Fixes: https://github.com/nodejs/node/issues/27863
PR-URL: https://github.com/nodejs/node/pull/27891
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reword the explanation of the Experimental stability index for brevity
and clarity.
PR-URL: https://github.com/nodejs/node/pull/27879
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
In addition implements --heap-prof-name, --heap-prof-dir and
--heap-prof-interval.
These flags are similar to --cpu-prof flags but they are meant
for the V8 sampling heap profiler instead of the CPU profiler.
PR-URL: https://github.com/nodejs/node/pull/27596
Fixes: https://github.com/nodejs/node/issues/27421
Reviewed-By: Jan Krems <jan.krems@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
As thread safe functions were back-ported to 8.x and released in 8.16
the documentation should be updated as well.
PR-URL: https://github.com/nodejs/node/pull/27567
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
The JSON documentation is relied up on by some consumers. It has been in
Experimental status for a long time. Promote it to Stable.
Reword the JSON documentation overview for brevity and clarity.
PR-URL: https://github.com/nodejs/node/pull/27842
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/27833
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Make `tls.connect()` support the `hints` option for feature parity with
`net.connect()`.
PR-URL: https://github.com/nodejs/node/pull/27816
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Edit the stability index overview to be more concise. Remove some
awkward and unclear phrasing.
PR-URL: https://github.com/nodejs/node/pull/27831
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Remove out-of-place detail about filesystem layout and tools for
generating documentation. Link to the issue tracker and the contribution
guide with clear, concise sentences.
PR-URL: https://github.com/nodejs/node/pull/27785
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
The HTML spec has officially landed JSON Modules and as such I think
we can move them out of the "experimental" status. They will still
be behind the `--experimental-modules` flag until the entire esm
implementation moves out of experimental.
Refs: https://html.spec.whatwg.org/#creating-a-json-module-script
PR-URL: https://github.com/nodejs/node/pull/27752
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Bradley Farias <bradley.meck@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Guy Bedford <guybedford@gmail.com>
Reviewed-By: Yuta Hiroto <hello@hiroppy.me>
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Reviewed-By: Jan Krems <jan.krems@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Within tls.md, the documentation for the response of
tlsSocket.getPeerCertificate() included subjectaltname
documented as an array of values. However these values are
actually returned as a single string of concatenated values.
The documentation has been updated to reflect this.
PR-URL: https://github.com/nodejs/node/pull/27757
Fixes: https://github.com/nodejs/node/issues/27721
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
This adds a reference anchor to circular structures when using
`util.inspect`. That way it's possible to identify with what object
the circular reference corresponds too.
PR-URL: https://github.com/nodejs/node/pull/27685
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
This makes sure that `util.format` uses `String` to stringify an object
in case the object has an own property named `toString` with type
`function`. That way objects that do not have such function are still
inspected using `util.inspect` and the old behavior is preserved as
well.
PR-URL: https://github.com/nodejs/node/pull/27621
Refs: https://github.com/facebook/jest/issues/8443
Reviewed-By: Roman Reiss <me@silverwind.io>
This includes the information that some inputs are handled
differently than others (e.g., `Symbols` are partially represented
as `NaN`).
PR-URL: https://github.com/nodejs/node/pull/27621
Reviewed-By: Roman Reiss <me@silverwind.io>
We don't have the stability functions for all stable
functions, only those that were previously experimental and
then when stable. Remove the stability indicator to be
consistent with the rest of the functions.
PR-URL: https://github.com/nodejs/node/pull/27753
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Replace the "About this Documentation" section with a simple welcome
message and a concise description of Node.js
PR-URL: https://github.com/nodejs/node/pull/27725
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Node.js v7.10.0 did not contain N-API. Update the `introduced_in`
metadata to prevent a broken 7.x "View another version" link in the
N-API docs.
PR-URL: https://github.com/nodejs/node/pull/27745
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
In combination with Atomics, this makes it possible to implement
generic synchronous functionality, e.g. `importScript()`, in Workers
purely by communicating with other threads.
This is a continuation of https://github.com/nodejs/node/pull/26686,
where a preference for a solution was voiced that allowed reading
individual messages, rather than emitting all messages through events.
PR-URL: https://github.com/nodejs/node/pull/27294
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Exposes SSL_CTX_set_keylog_callback in the form of a `keylog` event
that is emitted on clients and servers. This enables easy debugging
of TLS connections with i.e. Wireshark, which is a long-requested
feature.
PR-URL: https://github.com/nodejs/node/pull/27654
Refs: https://github.com/nodejs/node/issues/2363
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Add note to `napi_queue_async_work()` indicating that, upon successful
return, it must not be called again with the same work item.
Fixes: https://github.com/nodejs/node/issues/27217
PR-URL: https://github.com/nodejs/node/pull/27582
Reviewed-By: Franziska Hinkelmann <franziska.hinkelmann@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Remove some unnecessary words and simplify some phrases in
documentation.md.
PR-URL: https://github.com/nodejs/node/pull/27619
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Timing out and closing the socket after two minutes have elapsed is
surprising and problematic for users. This behavior was specific to
Node.js, and doesn't seem to be common in other language runtimes.
Fixes: https://github.com/nodejs/node/issues/27556
PR-URL: https://github.com/nodejs/node/pull/27558
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Rich Trott <rtrott@gmail.com>
When running the REPL as standalone program it's now possible to use
`process.on('uncaughtException', listener)`. It is going to use those
listeners from now on and the regular error output is suppressed.
It also fixes the issue that REPL instances started inside of an
application would silence all application errors. It is now prohibited
to add the exception listener in such REPL instances. Trying to add
such listeners throws an `ERR_INVALID_REPL_INPUT` error.
Fixes: https://github.com/nodejs/node/issues/19998
PR-URL: https://github.com/nodejs/node/pull/27151
Fixes: https://github.com/nodejs/node/issues/19998
Reviewed-By: Lance Ball <lball@redhat.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Notable changes:
* deps:
* Updated llhttp to 1.1.3. This fixes a bug that made Node.js' HTTP
parser refuse any request URL that contained the "|" (vertical bar)
character. https://github.com/nodejs/node/pull/27595
* tls:
* Added an `enableTrace()` method to `TLSSocket` and an `enableTrace`
option to `tls.createServer()`. When enabled, TSL packet trace
information is written to `stderr`. This can be used to debug TLS
connection problems. https://github.com/nodejs/node/pull/27497https://github.com/nodejs/node/pull/27376
* cli:
* Added a `--trace-tls` command-line flag that enables tracing of TLS
connections without the need to modify existing application code.
https://github.com/nodejs/node/pull/27497
* Added a `--cpu-prof-interval` command-line flag. It can be used to
specify the sampling interval for the CPU profiles generated by
`--cpu-prof`. https://github.com/nodejs/node/pull/27535
* module:
* Added the `createRequire()` method. It allows to create a require
function from a file URL object, a file URL string or an absolute
path string. The existing `createRequireFromPath()` method is now
deprecated https://github.com/nodejs/node/pull/27405.
* Throw on `require('./path.mjs')`. This is technically a breaking
change that should have landed with Node.js 12.0.0. It is necessary
to have this to keep the possibility for a future minor version to
load ES Modules with the require function.
https://github.com/nodejs/node/pull/27417
* repl:
* The REPL now supports multi-line statements using `BigInt` literals
as well as public and private class fields and methods.
https://github.com/nodejs/node/pull/27400
* The REPL now supports tab autocompletion of file paths with `fs`
methods. https://github.com/nodejs/node/pull/26648
* meta:
* Added Christian Clauss (https://github.com/cclauss) to
collaborators. https://github.com/nodejs/node/pull/27554
PR-URL: https://github.com/nodejs/node/pull/27578
Applications should never attempt to use the deciphered message
if authentication fails. In reality, this is usually not a problem
since OpenSSL does not disclose the plaintext in this case, but it
is still a design mistake and can lead to critical security problems
in other cipher modes and implementations.
PR-URL: https://github.com/nodejs/node/pull/27396
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Rich Trott <rtrott@gmail.com>
This patch implements --cpu-prof-interval to specify the sampling
interval of the CPU profiler started by --cpu-prof from the command
line. Also adjust the interval to 100 in test-cpu-prof.js to make
the test less flaky - it would fail if the time taken to finish
the workload is smaller than the sampling interval, which was
more likely on powerful machines when the interval was 1000.
PR-URL: https://github.com/nodejs/node/pull/27535
Reviewed-By: Jan Krems <jan.krems@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Franziska Hinkelmann <franziska.hinkelmann@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
This is an extremely important part of the ESM implementation
that should have been unflagged as a breaking change in v12.0.0
to allow us to unflag ESM in Node.js 12.x before LTS. Assuming we
can get consensus on this behavior I would argue that this Semver-Major
behavior change could be viewed as a Semver-Patch fix in v12.0.1
PR-URL: https://github.com/nodejs/node/pull/27417
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Jan Krems <jan.krems@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Ujjwal Sharma <usharma1998@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
This is an abstraction on top of creatRequireFromPath that can accept
both paths, URL Strings, and URL Objects.
PR-URL: https://github.com/nodejs/node/pull/27405
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Jan Krems <jan.krems@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Rich Trott <rtrott@gmail.com>
This commit adds a --trace-tls command-line flag. The
purpose is to enable tracing of TLS connections without the
need to modify existing application code.
PR-URL: https://github.com/nodejs/node/pull/27497
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
This commit adds the enableTrace option to the TLSSocket
constructor. It also plumbs the option through other relevant
APIs.
PR-URL: https://github.com/nodejs/node/pull/27497
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
There is no way to disable SNI extension when sending a request to HTTPS
server. Setting `options.servername` to a falsy value would make Node.js
core override it with either hostname or ip address.
This change introduces a way to disable SNI completely if this is
required for user's application. Setting `options.servername` to ``
in `https.request` would disable overrides and thus disable the
extension.
PR-URL: https://github.com/nodejs/node/pull/27316
Reviewed-By: Steven R Loomis <srloomis@us.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
This makes sure we do not use `assert.doesNotReject()` anywhere in
our code base. This is just a simple wrapper that catches the
rejection and then rejects it again in case of an error. Thus, it is
not useful to do that.
The error message for `assert.doesNotThrow()` is also improved.
PR-URL: https://github.com/nodejs/node/pull/27402
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Beth Griggs <Bethany.Griggs@uk.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/27367
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>
Instead of using the public AssertionError, use a simplified
error that describes potential causes of these assertions
and suggests the user to open an issue.
PR-URL: https://github.com/nodejs/node/pull/26635
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
This fixes a pull request number in `repl.md`.
PR-URL: https://github.com/nodejs/node/pull/27336
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>
To improve the integration of `--cpu-prof` with workers, this patch
splits `--cpu-prof-path` into `--cpu-prof-dir` and `--cpu-prof-name`,
so when a worker is launched from a thread that enables
`--cpu-prof`, if the parent thread sets `--cpu-prof-dir`, then the
profile of both thread would be generated to the specified directory.
If they end up specifying the same `--cpu-prof-name` the behavior
is undefined the last profile will overwritten the first one.
PR-URL: https://github.com/nodejs/node/pull/27306
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
In the code base the word `report` is almost only used to refer to
the diagnostic report when it's a noun, and it's programmable
interface `process.report()` it not prefixed, so `report` should be
unambiguous enough to use without `diagnostic`.
PR-URL: https://github.com/nodejs/node/pull/27312
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
This patch introduces a CLI flag --cpu-prof that starts the V8
CPU profiler on start up, and ends the profiler then writes the
CPU profile before the Node.js instance (on the main thread or
the worker thread) exits. By default the profile is written to
`${cwd}/CPU.${yyyymmdd}.${hhmmss}.${pid}.${tid}.${seq}.cpuprofile`.
The patch also introduces a --cpu-prof-path flag for the user
to specify the path the profile will be written to.
Refs: https://github.com/nodejs/node/issues/26878
PR-URL: https://github.com/nodejs/node/pull/27147
Reviewed-By: Anna Henningsen <anna@addaleax.net>
The characters specified within NODE_OPTIONS can now be escaped, which
is handy especially in conjunction with `--require` (where the file path
might happen to contain spaces that shouldn't cause the option to be
split into two).
Fixes: https://github.com/nodejs/node/issues/12971
PR-URL: https://github.com/nodejs/node/pull/24065
Reviewed-By: Anna Henningsen <anna@addaleax.net>
In lib/dns.js, use `isIP()` instead of `isIPv4()` for determining the
`family` property in `lookup()`. If an invalid IP address is returned,
the `family` currently provided is `6`. With this change, it will be
`0`. Update documentation to reflect this.
PR-URL: https://github.com/nodejs/node/pull/27081
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
New flag is for string input only
PR-URL: https://github.com/nodejs/node/pull/27184
Reviewed-By: Jan Krems <jan.krems@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
This adds a flag to define the default behavior for unhandled
rejections. Three modes exist: `none`, `warn` and `strict`. The first
is going to silence all unhandled rejection warnings. The second
behaves identical to the current default with the excetion that no
deprecation warning will be printed and the last is going to throw
an error for each unhandled rejection, just as regular exceptions do.
It is possible to intercept those with the `uncaughtException` hook
as with all other exceptions as well.
This PR has no influence on the existing `unhandledRejection` hook.
If that is used, it will continue to function as before.
PR-URL: https://github.com/nodejs/node/pull/26599
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Matheus Marchini <mat@mmarchini.me>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
This updates the customization of colors for `util.inspect`. A couple
entries were missing and this also adds a reference to check for colors.
PR-URL: https://github.com/nodejs/node/pull/27052
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Using `util.inspect` on errors is going to highlight userland and
node_module stack frames from now on. This is done by marking Node.js
core frames grey and frames that contain `node_modules` in their path
yellow.
That way it's easy to grasp what frames belong to what code.
PR-URL: https://github.com/nodejs/node/pull/27052
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
This validates the input to make sure the arguments do not overflow.
Before, if the input would overflow, it would cause the write to be
performt in the wrong spot / result in unexpected behavior.
Instead, just use a strict number validation.
PR-URL: https://github.com/nodejs/node/pull/27045
Fixes: https://github.com/nodejs/node/issues/27043
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
* Add missing reference ids.
* Un-link impossible wildcard link.
* Hardcode a link that baffles our new doc toolchain (`[][]` part
is parsed as an empty link now instead of two-dimensional array sign).
PR-URL: https://github.com/nodejs/node/pull/27141
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
This flag allows heap snapshots to be captured without
modifying application code.
PR-URL: https://github.com/nodejs/node/pull/27133
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
When the threadsafe functions were promoted to
version 4 from experimental we missed documenting
that. Add the version indicator for these functions
in the doc.
PR-URL: https://github.com/nodejs/node/pull/27155
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This changes the `compact` default from `true` to `3`. That mode
changes arrays to be grouped together, it alignes multiple small
entries on a single line in similar to `compact` true but only for
the most inner three depth levels and the closing brackets are
always on the same indentation as the openeing of the object instead
of at the same line as another property.
Big strings will be naturally broken into multiple lines instead of
having one huge line that is not well readable.
The output size mainly stays the same that way while it will be
smaller in case of big arrays.
Increasing the `breakLength` to 80 adjusts for most terminals that
support at least 80 characters in a single line and improves the
general output that way. A lot of calculations use the `breakLength`
to determine the concrete behavior.
PR-URL: https://github.com/nodejs/node/pull/27109
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Minwoo Jung <minwoo@nodesource.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Server.listenFD() has been runtime deprecated since
Node 0.7.12. This commit moves the deprecation to
end-of-life.
PR-URL: https://github.com/nodejs/node/pull/27127
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Set the default maxBuffer size to 204,800 bytes for execSync,
execFileSync, and spawnSync.
APIs that return the child output as a string should have non-infinite
defaults for maxBuffer sizes to avoid out-of-memory error conditions. A
non-infinite default used to be the documented behaviour for all
relevant APIs, but the implemented behaviour for execSync, execFileSync
and spawnSync was to have no maxBuffer limits.
PR-URL: https://github.com/nodejs/node/pull/23027
Refs: https://github.com/nodejs/node/pull/22894
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
The community maintained material hasn't been updated for
almost five years, corresponds to Node 0.11, and is no longer
accurate. This commit removes the references.
PR-URL: https://github.com/nodejs/node/pull/27126
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Beth Griggs <Bethany.Griggs@uk.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
This commit adds support for RSA-PSS keys, including
- KeyObjects of type rsa-pss,
- key pair generation for RSA-PSS, and
- signing and verification using RSA-PSS keys.
PR-URL: https://github.com/nodejs/node/pull/26960
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
This improves `util.format()` by returning more meaningful results
when using `%s` as specifier and any object as value. Besides that
`BigInt` will also be represented with an `n` at the end to indicate
that it's of type `BigInt`.
PR-URL: https://github.com/nodejs/node/pull/26927
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>
Correctly document the default maxBuffer size for execSync,
execFileSync, and spawnSync. It is 200 * 1024, not Infinity.
Add tests to verify behaviour is as documented.
PR-URL: https://github.com/nodejs/node/pull/22894
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Added the `dgram.connect()` and `dgram.disconnect()` methods that
associate/disassociate a udp socket to/from a remote address.
It optimizes for cases where lots of packets are sent to the same
address.
Also added the `dgram.remoteAddress()` method to retrieve the associated
remote address.
PR-URL: https://github.com/nodejs/node/pull/26871
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
The diagnostic report currently contains command line
information, and the environment, which contains the PWD
environment variable. This combination covers the majority
of cases, but it would be useful to have the result of
uv_cwd() as an additional data point. This commit adds that
information.
PR-URL: https://github.com/nodejs/node/pull/27022
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Make notes about `TypeError` conditions in `Buffer.from()` variants
more accurate.
PR-URL: https://github.com/nodejs/node/pull/27030
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
This has been warning for long enough, without any API changes
in the last few months.
PR-URL: https://github.com/nodejs/node/pull/26581
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This publicly documents that adding native module names will resolve
the added entry instead of the native module.
It also updates the description why extensions are deprecated.
PR-URL: https://github.com/nodejs/node/pull/26971
Refs: https://github.com/nodejs/node/pull/25362
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/26987
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
This was eligible to begin deprecation in Node 8.
PR-URL: https://github.com/nodejs/node/pull/26982
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Instead of sharing the OS-backed store for all `process.env` instances,
create a copy of `process.env` for every worker that is created.
The copies do not interact. Native-addons do not see modifications to
`process.env` from Worker threads, but child processes started from
Workers do default to the Worker’s copy of `process.env`.
This makes Workers behave like child processes as far as `process.env`
is concerned, and an option corresponding to the `child_process`
module’s `env` option is added to the constructor.
Fixes: https://github.com/nodejs/node/issues/24947
PR-URL: https://github.com/nodejs/node/pull/26544
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
When a user attempts to load an encrypted key without supplying a
passphrase, a cryptic OpenSSL error is thrown. This change intercepts
the OpenSSL error and throws a nice error code instead.
PR-URL: https://github.com/nodejs/node/pull/25208
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
These methods are added primarily to allow signing and verifying
using Ed25519 and Ed448 keys, which do not support streaming of
input data. However, any key type can be used with these new
APIs, to allow better performance when only signing/verifying
a single chunk.
Fixes: https://github.com/nodejs/node/issues/26320
PR-URL: https://github.com/nodejs/node/pull/26611
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
The reference is confusing because the object is actually of class
SecureContext. There is no object with class "credentials".
See: https://github.com/nodejs/node/issues/20432#issuecomment-441819285
PR-URL: https://github.com/nodejs/node/pull/26908
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
A generic error lacks any of the context or detail of the underlying
OpenSSL error, so throw from C++, and report the OpenSSL error to the
callback.
PR-URL: https://github.com/nodejs/node/pull/26868
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Don't force the user to parse the long-style OpenSSL error message,
decorate the error with the library, reason, code, function.
PR-URL: https://github.com/nodejs/node/pull/26868
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Normalized boolean options in the gypfiles for consistency both
internally and with the V8 GN config.
Co-authored-by: Michaël Zasso <targos@protonmail.com>
PR-URL: https://github.com/nodejs/node/pull/26685
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
This PR updates the current `--experimental-modules` implementation
based on the work of the modules team and reflects Phase 2 of our
new modules plan.
The largest differences from the current implementation include
* `packge.type` which can be either `module` or `commonjs`
- `type: "commonjs"`:
- `.js` is parsed as commonjs
- default for entry point without an extension is commonjs
- `type: "module"`:
- `.js` is parsed as esm
- does not support loading JSON or Native Module by default
- default for entry point without an extension is esm
* `--entry-type=[mode]`
- allows you set the type on entry point.
* A new file extension `.cjs`.
- this is specifically to support importing commonjs in the
`module` mode.
- this is only in the esm loader, the commonjs loader remains
untouched, but the extension will work in the old loader if you use
the full file path.
* `--es-module-specifier-resolution=[type]`
- options are `explicit` (default) and `node`
- by default our loader will not allow for optional extensions in
the import, the path for a module must include the extension if
there is one
- by default our loader will not allow for importing directories that
have an index file
- developers can use `--es-module-specifier-resolution=node` to
enable the commonjs specifier resolution algorithm
- This is not a “feature” but rather an implementation for
experimentation. It is expected to change before the flag is
removed
* `--experimental-json-loader`
- the only way to import json when `"type": "module"`
- when enable all `import 'thing.json'` will go through the
experimental loader independent of mode
- based on https://github.com/whatwg/html/issues/4315
* You can use `package.main` to set an entry point for a module
- the file extensions used in main will be resolved based on the
`type` of the module
Refs: https://github.com/nodejs/modules/blob/master/doc/plan-for-new-modules-implementation.md
Refs: https://github.com/GeoffreyBooth/node-import-file-specifier-resolution-proposal
Refs: https://github.com/nodejs/modules/pull/180
Refs: https://github.com/nodejs/ecmascript-modules/pull/6
Refs: https://github.com/nodejs/ecmascript-modules/pull/12
Refs: https://github.com/nodejs/ecmascript-modules/pull/28
Refs: https://github.com/nodejs/modules/issues/255
Refs: https://github.com/whatwg/html/issues/4315
Refs: https://github.com/w3c/webcomponents/issues/770
Co-authored-by: Myles Borins <MylesBorins@google.com>
Co-authored-by: John-David Dalton <john.david.dalton@gmail.com>
Co-authored-by: Evan Plaice <evanplaice@gmail.com>
Co-authored-by: Geoffrey Booth <webmaster@geoffreybooth.com>
Co-authored-by: Michaël Zasso <targos@protonmail.com>
PR-URL: https://github.com/nodejs/node/pull/26745
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Guy Bedford <guybedford@gmail.com>
Reviewed-By: Ben Coe <bencoe@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
We currently ignore invalid `main` entries in package.json files.
This does not seem to be very user friendly as it's certainly an
error if the `main` entry is not a valid file name. So instead of
trying to resolve the file otherwise, throw an error immediately to
improve the user experience.
To keep it backwards compatible `index.js` files in the same directory
as the `package.json` will continue to be resolved instead but that
behavior is now deprecated.
PR-URL: https://github.com/nodejs/node/pull/26823
Fixes: https://github.com/nodejs/node/issues/26588
Reviewed-By: Guy Bedford <guybedford@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
It is possible to require the 'process' module and with the upcoming
support for ES Modules, importing 'process' might be the more favorable
way for developers. This commit adds that option to the documentation.
PR-URL: https://github.com/nodejs/node/pull/26792
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
PR-URL: https://github.com/nodejs/node/pull/26821
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
This makes sure that the described default behavior for the
`terminal` option is actually always used and not only when running
the REPL as standalone program.
The options code is now logically combined instead of being spread
out in the big REPL constructor.
PR-URL: https://github.com/nodejs/node/pull/26518
Reviewed-By: Lance Ball <lball@redhat.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Another nail in the coffin here, farewell ye ol C-style apis.
These apis caused numerous other issues that required far too many
safeguards. This gets us one step closer to not having to worry about
those issues anymore.
Refs: https://github.com/nodejs/node/pull/18066
Refs: https://github.com/nodejs/node/pull/20298
PR-URL: https://github.com/nodejs/node/pull/26760
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
This introduces TLS1.3 support and makes it the default max protocol,
but also supports CLI/NODE_OPTIONS switches to disable it if necessary.
TLS1.3 is a major update to the TLS protocol, with many security
enhancements. It should be preferred over TLS1.2 whenever possible.
TLS1.3 is different enough that even though the OpenSSL APIs are
technically API/ABI compatible, that when TLS1.3 is negotiated, the
timing of protocol records and of callbacks broke assumptions hard-coded
into the 'tls' module.
This change introduces no API incompatibilities when TLS1.2 is
negotiated. It is the intention that it be backported to current and LTS
release lines with the default maximum TLS protocol reset to 'TLSv1.2'.
This will allow users of those lines to explicitly enable TLS1.3 if they
want.
API incompatibilities between TLS1.2 and TLS1.3 are:
- Renegotiation is not supported by TLS1.3 protocol, attempts to call
`.renegotiate()` will always fail.
- Compiling against a system OpenSSL lower than 1.1.1 is no longer
supported (OpenSSL-1.1.0 used to be supported with configure flags).
- Variations of `conn.write('data'); conn.destroy()` have undefined
behaviour according to the streams API. They may or may not send the
'data', and may or may not cause a ERR_STREAM_DESTROYED error to be
emitted. This has always been true, but conditions under which the write
suceeds is slightly but observably different when TLS1.3 is negotiated
vs when TLS1.2 or below is negotiated.
- If TLS1.3 is negotiated, and a server calls `conn.end()` in its
'secureConnection' listener without any data being written, the client
will not receive session tickets (no 'session' events will be emitted,
and `conn.getSession()` will never return a resumable session).
- The return value of `conn.getSession()` API may not return a resumable
session if called right after the handshake. The effect will be that
clients using the legacy `getSession()` API will resume sessions if
TLS1.2 is negotiated, but will do full handshakes if TLS1.3 is
negotiated. See https://github.com/nodejs/node/pull/25831 for more
information.
PR-URL: https://github.com/nodejs/node/pull/26209
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
`error` event on each kind of stream is optionally emitted when
`.destroy()` method is called. It depends on `._destroy()`
implementation. In default implementation this event will no be
fired unless `error` parameter has been provided.
It was already mentioned for `writable.destroy([error])`, so I
just copied same sentence for the other streams.
PR-URL: https://github.com/nodejs/node/pull/26589
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
This adds support to enforce a specific color depth by checking the
`FORCE_COLOR` environment variable similar to `chalk`.
On top of that we also add support for the `NO_COLOR` environment
variable as suggested by https://no-color.org/.
PR-URL: https://github.com/nodejs/node/pull/26485
Refs: https://github.com/nodejs/node/pull/26248
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
PR-URL: https://github.com/nodejs/node/pull/26753
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>
The object returned by `child_process.spawnSync()` can have the `status`
property set to `null` if the process terminated due to a signal. We
even test for this in
test/parallel/test-child-process-spawnsync-kill-signal.js.
Update the documentation to reflect this.
PR-URL: https://github.com/nodejs/node/pull/26680
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
AsyncResource.emitBefore and AsyncResource.emitAfter have been
deprecated in https://github.com/nodejs/node/pull/18632. This PR removes
it all.
This commit also updates some embedder tests to use internal APIs.
The conditions are still possible for Node.js core developers but not
for end users.
PR-URL: https://github.com/nodejs/node/pull/26530
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ali Ijaz Sheikh <ofrobots@google.com>
Reviewed-By: Benedikt Meurer <benedikt.meurer@gmail.com>
Reviewed-By: Yang Guo <yangguo@chromium.org>
Reviewed-By: Andreas Madsen <amwebdk@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
OpenSSL 1.0.0 returned incorrect version information. OpenSSL 1.1.0
fixed this, but returning the correct information broke our tests, so
was considered semver-major. Because of this, the version was hard-coded
to the OpenSSL 1.0.0 (incorrect) string in 5fe81c8aff.
This is ancient history, start returning the correct cipher version.
PR-URL: https://github.com/nodejs/node/pull/26625
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Use "RFC 1234" instead of "rfc1234", "RFC1234" or similar variants.
PR-URL: https://github.com/nodejs/node/pull/26727
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
This commit cleans up net module, including: 1. remove assigning
`handle.readable` and `handle.writable` 2. documents
`NODE_PENDING_PIPE_INSTANCES` enviroment variable 3. use constants
for '0.0.0.0' and '::'.
PR-URL: https://github.com/nodejs/node/pull/24128
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Adds `v8.writeHeapSnapshot(filename)` with impl adapted
from the `node-heapdump` module.
Also, adds a v8.getHeapSnapshot() alternative that returns
a Readable Stream
PR-URL: https://github.com/nodejs/node/pull/26501
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
sendTrilers => sendTrailers.
PR-URL: https://github.com/nodejs/node/pull/26616
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/26319
Fixes: https://github.com/nodejs/node/issues/26316
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Ujjwal Sharma <usharma1998@gmail.com>
This aligns `MessagePort`s more with the web API.
Refs: https://github.com/nodejs/node/issues/26463
PR-URL: https://github.com/nodejs/node/pull/26487
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
PR-URL: https://github.com/nodejs/node/pull/26498
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Eugene Ostroukhov <eostroukhov@google.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: James M Snell <jasnell@gmail.com>
writeReport() is more descriptive of what the function does.
PR-URL: https://github.com/nodejs/node/pull/26527
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
PR-URL: https://github.com/nodejs/node/pull/26495
Fixes: https://github.com/nodejs/node/issues/26484
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
So far it was not possible to modify the inspection defaults used by
the REPL from the running instance itself. This introduces a new
property on `util.inspect` which is only used inside the REPL and which
allows to modify the used inspection defaults at any point of time.
PR-URL: https://github.com/nodejs/node/pull/26375
Reviewed-By: James M Snell <jasnell@gmail.com>
Expose the size of asymetric keys of crypto key object from the
crypto module added in v11.6.0.
PR-URL: https://github.com/nodejs/node/pull/26387
Refs: https://github.com/nodejs/node/pull/24234
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
The N-API version of the hello example, returned "hello" instead of
"world".
PR-URL: https://github.com/nodejs/node/pull/26328
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
This commit removes process.report.setOptions(). Instead of
using complex configuration synchronization between C++ and
JS, this commit introduces individual getters and setters.
PR-URL: https://github.com/nodejs/node/pull/26414
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Wyatt Preul <wpreul@gmail.com>
This adds a small wrapper around the `getColorDepth` function to check
if the stream supports at least a specific amount of colors. This is
convenient as the other API is not as straight forward and most use
cases likely only want to know if a specific amount of colors is
supported or not.
PR-URL: https://github.com/nodejs/node/pull/26247
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Weijia Wang <starkwang@126.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
This change allows passing private key objects to
crypto.createPublicKey, resulting in a key object that represents a
valid public key for the given private key. The returned public key
object can be used and exported safely without revealing information
about the private key.
PR-URL: https://github.com/nodejs/node/pull/26278
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
The support matrix was out of date. Update
with current status.
Fixes: https://github.com/nodejs/node/issues/25801
PR-URL: https://github.com/nodejs/node/pull/26377
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
trigger more accurately describes the use of the field.
Previously, location was just the name of the C++ function
that called TriggerNodeReport().
PR-URL: https://github.com/nodejs/node/pull/26386
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This commit completes the renaming of node-report to report
in order to better differentiate core's reporting from the
node-report npm module.
PR-URL: https://github.com/nodejs/node/pull/26371
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Minwoo Jung <minwoo@nodesource.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This change adds a EventEmitter.once() method that wraps ee.once in a
promise.
Co-authored-by: David Mark Clements <david.mark.clements@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/26078
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Provide `process.execArgv`. If an `execArgv` option is passed to the
`Worker` constructor, that option is used as its value; if not,
the parent’s `process.execArgv` is inherited (since that also goes
for the actual options in that case).
PR-URL: https://github.com/nodejs/node/pull/26267
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/26249
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/26368
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
This is only a reference to the instance and should not be used.
PR-URL: https://github.com/nodejs/node/pull/26260
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
When using `util.inspect()` with `compact` mode set to a number, all
array entries exceeding 6 are going to be grouped together into
logical parts.
PR-URL: https://github.com/nodejs/node/pull/26269
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
This overloads the `compact` option from `util.inspect()`. If it's
set to a number, it is going to align all most inner entries on the
same lign if they adhere to the following:
* The entries do not exceed the `breakLength` options value.
* The entry is one of the local most inner levels up the the one
provided in `compact`.
PR-URL: https://github.com/nodejs/node/pull/26269
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
PR-URL: https://github.com/nodejs/node/pull/26300
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Implements `napi_create_date()` as well as `napi_is_date()` to
allow working with JavaScript Date objects.
PR-URL: https://github.com/nodejs/node/pull/25917
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This updates a lot of comments.
PR-URL: https://github.com/nodejs/node/pull/26223
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
This prevents leaking of the internal `inspect()` properties when
using a custom inspect function.
It also aligns the indentation to the way it was in v8.0.0 since
that changed unintentionally. All strings returned by the custom
inspect function will now be indented appropriately to the current
depth.
PR-URL: https://github.com/nodejs/node/pull/24971
Refs: https://github.com/nodejs/node/issues/24765
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Rich Trott <rtrott@gmail.com>
This error is used to propagate errors returned from the
inspector module's command system.
PR-URL: https://github.com/nodejs/node/pull/26255
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Eugene Ostroukhov <eostroukhov@google.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
PR-URL: https://github.com/nodejs/node/pull/26251
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/26250
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Upstream V8 is dropping support for mips/mipsel/mips64/mips64el.
This commit removes the build flags from the configure script
and some loose ends from the documentation.
PR-URL: https://github.com/nodejs/node/pull/26192
Fixes: https://github.com/nodejs/node/issues/26179
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Yang Guo <yangguo@chromium.org>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: James M Snell <jasnell@gmail.com>
This commit removes the --diagnostic-report-verbose CLI option
and all associated logic. The flag is currently only used in one
place, and only reflects the settings at startup. Additionally,
Node tends to use the NODE_DEBUG mechanism for adding verbose
output.
PR-URL: https://github.com/nodejs/node/pull/26195
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Remove all-caps from child_process.md.
PR-URL: https://github.com/nodejs/node/pull/26141
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This adds a few examples and clarifications.
PR-URL: https://github.com/nodejs/node/pull/26110
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Include the stack of requires that led to a MODULE_NOT_FOUND error.
PR-URL: https://github.com/nodejs/node/pull/25690
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
libuv returns values for `blksize` and `blocks` on stat calls so
do not coerce them into `undefined` on Windows.
PR-URL: https://github.com/nodejs/node/pull/26056
Fixes: https://github.com/nodejs/node/issues/25913
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/26055
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Prefer structured output over stringified information
for libuv handles and the native stack trace.
PR-URL: https://github.com/nodejs/node/pull/26019
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Adds a `repl.setupHistory()` instance method so that
programmatic REPLs can also write history to a file.
This change also refactors all of the history file
management to `lib/internal/repl/history.js`, cleaning
up and simplifying `lib/internal/repl.js`.
PR-URL: https://github.com/nodejs/node/pull/25895
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/25579
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
setDiagnosticReportOptions() is a method on process.report,
making the "DiagnosticReport" part redundant. Rename the
function to setOptions().
PR-URL: https://github.com/nodejs/node/pull/25990
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
This commit makes several corrections, and generally edits the
documentation for process.report and its methods.
PR-URL: https://github.com/nodejs/node/pull/25983
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Beth Griggs <Bethany.Griggs@uk.ibm.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Socket timeouts set using the `'connection'` event are replaced by
`server.keepAliveTimeout` when a response is handled.
PR-URL: https://github.com/nodejs/node/pull/25748
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/25565
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/25565
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/25906
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/25910
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/25855
Refs: https://github.com/nodejs/node/pull/25755
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
OpenSSL has supported async notification of sessions and tickets since
1.1.0 using SSL_CTX_sess_set_new_cb(), for all versions of TLS. Using
the async API is optional for TLS1.2 and below, but for TLS1.3 it will
be mandatory. Future-proof applications should start to use async
notification immediately. In the future, for TLS1.3, applications that
don't use the async API will silently, but gracefully, fail to resume
sessions and instead do a full handshake.
See: https://wiki.openssl.org/index.php/TLS1.3#Sessions
PR-URL: https://github.com/nodejs/node/pull/25831
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
This has already been practically end-of-life since `node --debug`
alone would exit the process. This patch drops support of
`node --inspect --debug-brk` as well.
`node --inspect --debug-brk` has been deprecated since v8,
it has been maintained so that vendors can target Node.js
v6 and above without detecting versions.
The support of `--inspect`, which starts from v6, will reach
end-of-life in April 2019, it should be safe to drop the support
of `--inspect --debug-brk` altogether in v12.
Also removes `process._deprecatedDebugBrk`
PR-URL: https://github.com/nodejs/node/pull/25828
Refs: https://github.com/nodejs/node/pull/12949
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Eugene Ostroukhov <eostroukhov@google.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Report release metadata separately from `componentVersions`.
Test `componentVersions` and `release` values in the report.
PR-URL: https://github.com/nodejs/node/pull/25826
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Instead of returning a generic 400 response when the
max header size is reached, return a 431 Request Header
Fields Too Large.
This is a semver-major because it changes the HTTP
status code for requests that trigger the header
overflow error.
PR-URL: https://github.com/nodejs/node/pull/25605
Fixes: https://github.com/nodejs/node/issues/25528
Refs: https://tools.ietf.org/html/rfc6585#section-5
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
- Give the glibc version entries more specific names.
- Group all of the glibc version reporting together.
PR-URL: https://github.com/nodejs/node/pull/25781
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Revise inspect security information in cli.md.
* Reword sentence for brevity.
* Use bulleted list for clarity of options.
* Eliminate personal pronoun (_you_) per style guide.
PR-URL: https://github.com/nodejs/node/pull/25779
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
- Tidy up description in docs.
- Remove a second definition in the docs.
- Remove unused string input parameter.
- Remove duplicate "JavaScript Callstack" in error messages.
PR-URL: https://github.com/nodejs/node/pull/25749
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reverts some timers behavior back to as it was before
2930bd1317
That commit introduced an unintended change which allowed non-integer
timeouts to actually exist since the value is no longer converted to an
integer via a TimeWrap handle directly.
Even with the fix in
e9de435498
non-integer timeouts are still indeterministic, because libuv does not
support them.
This fixes the issue by emulating the old behavior:
truncate the `_idleTimeout` before using it.
See comments in
https://github.com/nodejs/node/pull/24214
for more background on this.
PR-URL: https://github.com/nodejs/node/pull/24819
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This example function returns a promise directly
rather than implicitly via async/await.
PR-URL: https://github.com/nodejs/node/pull/25712
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
By default the agent options are passed to `net.createConnection()`
which sets the timeout on the socket immediately after creating it.
PR-URL: https://github.com/nodejs/node/pull/25489
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Do not stringify numbers and boolean values when writing JSON.
PR-URL: https://github.com/nodejs/node/pull/25651
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Matheus Marchini <mat@mmarchini.me>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Beth Griggs <Bethany.Griggs@uk.ibm.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
This changes the loose deep equal comparison by using the same logic
as done in the strict deep equal comparison besides comparing
primitives loosely, not comparing symbol properties and not comparing
the prototype.
`assert.deepEqual` is still commenly used and this is likely the
biggest pitfall.
Most changes are only minor and won't have a big impact besides
likely fixing user expectations.
PR-URL: https://github.com/nodejs/node/pull/25008
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
There is a description of how to use s_client for testing of
renegotiation limits in the `tls` module documentation. The information
is somewhat out of scope, but it also may be somewhat problematic due to
changes/peculiarities (bugs?) in recent s_client. Remove the text.
Refs: https://github.com/nodejs/node/pull/25381#issuecomment-457067137
PR-URL: https://github.com/nodejs/node/pull/25678
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Environment variables with empty values are not permitted on Windows. As
such, to disable persistent REPL history one or more spaces should be
used. Node will trim whitespace from the variable, resulting in a blank
variable at runtime and the desired behaviour.
PR-URL: https://github.com/nodejs/node/pull/25672
Fixes: https://github.com/nodejs/node/issues/25661
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
Reviewed-By: Bartosz Sosnowski <bartosz@janeasystems.com>
It does not affect dns.lookup().
PR-URL: https://github.com/nodejs/node/pull/25570
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Link the guide discussing timers and nextTick from the nextTick docs, as
it already was from the timers docs. Make the link text and targets more
specific.
PR-URL: https://github.com/nodejs/node/pull/25619
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Keep the process.binding() deprecation message short and direct. In
addition to the usual benefits of doing that, it also means the message
is less likely to line-wrap once we move to a runtime deprecation.
PR-URL: https://github.com/nodejs/node/pull/25654
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Preserves truncated output for `child_process.exec()` when `maxBuffer`
is exceeded.
This is particularly useful for commands which have indistinguishable
error codes for what output they produce.
PR-URL: https://github.com/nodejs/node/pull/24951
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
I was implementing a Writable stream and misunderstood `decodeStrings`
to mean 'will decode `Buffer`s into `string`s before calling `_write`'.
This change adds a little more detail to the description of
`decodeStrings` to clarify its effect on a Writable stream & what gets
passed to `_write`.
Changing the name of the option to `encodeStrings` would make it much
easier to understand, but the name was chosen in 2012 and the option
used in many projects (22k mentions of 'decodeStringsr in JS projects in
GitHub). Deprecating the old name & rolling out a replacement is beyond
my capabilities as a first-time contributor.
PR-URL: https://github.com/nodejs/node/pull/25468
Fixes: https://github.com/nodejs/node/issues/25464
Reviewed-By: Anna Henningsen <anna@addaleax.net>
If specified, and only when a socket is created internally, the option
will make `socket.setTimeout()` to be called on the created socket with
the given timeout.
This is consistent with the `timeout` option of `net.connect()` and
prevents the `timeout` option of the `https.Agent` from being ignored
when a socket is created.
PR-URL: https://github.com/nodejs/node/pull/25517
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
PR-URL: https://github.com/nodejs/node/pull/25547
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
One test per each API, so that additional tests in future are modular.
test/common/report.js contain common functions that tests leverage.
PR-URL: https://github.com/nodejs/node/pull/22712
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <Michael_Dawson@ca.ibm.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
a separate section added for node-report at top level
main documentation added to doc/api/report.md
API documentation added to doc/api/process.md
PR-URL: https://github.com/nodejs/node/pull/22712
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <Michael_Dawson@ca.ibm.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
This PR adds the ability to provide Workers with their own
execArgv flags in replacement of the main thread's execArgv. Only
per-Isolate/per-Environment options are allowed. Per-Process options
and V8 flags are not allowed. Passing an empty execArgv array will
reset per-Isolate and per-Environment options of the Worker to their
defaults. If execArgv option is not passed, the Worker will get
the same flags as the main thread.
Usage example:
```
const worker = new Worker(__filename, {
execArgv: ['--trace-warnings'],
});
```
PR-URL: https://github.com/nodejs/node/pull/25467
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/25544
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
This enables code loaded via the module system to be checked for
integrity to ensure the code loaded matches expectations.
PR-URL: https://github.com/nodejs/node/pull/23834
Reviewed-By: Guy Bedford <guybedford@gmail.com>
Reviewed-By: Vladimir de Turckheim <vlad2t@hotmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
- DEFAULT_ECDH_CURVE default changed to 'auto' for 10.0.0
- ecdhCurve parameter allowed multiple values and 'auto' from 9.0.0
PR-URL: https://github.com/nodejs/node/pull/25502
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
The API has existed forever and is used in our unit tests. It is
supported for TLS1.3 as well as 1.2 and useful for troubleshooting, so
it should be documented.
PR-URL: https://github.com/nodejs/node/pull/25423
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
- Use complete examples that can be pasted and run as-is
- Move note about algorithm to the functions it applies to
- Uncapitalize inconsistence use of "Class"
- Use both EC and RSA keys in the examples
- Note that hash and digest are two names for the same algorithms
PR-URL: https://github.com/nodejs/node/pull/25452
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: James M Snell <jasnell@gmail.com>
This PR just places the `vm.SourceTextModule` class section
after the `vm.Script` class section, restoring the alphabetical order.
PR-URL: https://github.com/nodejs/node/pull/25374
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
`vm` module API heavily reuses common code, but the doc seems
to be a bit out of date: some options are listed in wrong places,
some options and history entries are missed.
Also some fragments need to be formalized and unified.
PR-URL: https://github.com/nodejs/node/pull/25422
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Ujjwal Sharma <usharma1998@gmail.com>
Rewrite worker_threads introductory material focusing on simpler and
shorter sentences.
PR-URL: https://github.com/nodejs/node/pull/25402
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Eugene Ostroukhov <eostroukhov@google.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
The 'readable' event assumes that calls to readable.read() happens
within that event handler until readable.read() returns null.
Fixes: https://github.com/nodejs/node/issues/20503
PR-URL: https://github.com/nodejs/node/pull/25375
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
stream.md was the only YAML in doc/api that was using `>` for line
continuation, and only used it for a few descriptions, most used the
same wrapping style the rest of the documentation does.
Also added punctuation and capitialization to a few description
sentences.
Fixes: https://github.com/nodejs/node/pull/25413#discussion_r246451003
PR-URL: https://github.com/nodejs/node/pull/25419
Fixes: https://github.com/nodejs/node/issues/25413
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Document current behaviour where some methods can be called
when an exception is pending, while others cannot and explain
the behaviour.
PR-URL: https://github.com/nodejs/node/pull/25339
Refs: https://github.com/nodejs/abi-stable-node/issues/356
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Fixes: https://github.com/nodejs/node/issues/25328
PR-URL: https://github.com/nodejs/node/pull/25333
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Beth Griggs <Bethany.Griggs@uk.ibm.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
PR-URL: https://github.com/nodejs/node/pull/25371
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Daijiro Wachi <daijiro.wachi@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Having an experimental feature behind a flag makes change
if we are expecting significant breaking changes to its API.
Since the Worker API has been essentially stable since
its initial introduction, and no noticeable doubt about
possibly not keeping the feature around has been voiced,
removing the flag and thereby reducing the barrier to experimentation,
and consequently receiving feedback on the implementation,
seems like a good idea.
PR-URL: https://github.com/nodejs/node/pull/25361
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Yuta Hiroto <hello@hiroppy.me>
Reviewed-By: Shingo Inoue <leko.noor@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Masashi Hirano <shisama07@gmail.com>
Reviewed-By: Weijia Wang <starkwang@126.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
PR-URL: https://github.com/nodejs/node/pull/25338
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Minwoo Jung <minwoo@nodesource.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Some APIs already accept private keys instead of public keys. This
changes all relevant crypto APIs to do so.
PR-URL: https://github.com/nodejs/node/pull/25217
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
As per the decision in https://github.com/nodejs/node/issues/23433,
the `fs.writeFile` will always write from the current position if it
is used with file descriptors. This patch updates it.
Ref: https://github.com/nodejs/node/pull/23709
PR-URL: https://github.com/nodejs/node/pull/25080
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Weijia Wang <starkwang@126.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
This commit moves DEP0023 to end of life status. The
os.getNetworkInterfaces() method was introduced in the
unstable 0.5.0 release, and runtime deprecated in 0.6.0, the
first stable release of its existence.
This commit also fixes an inaccuracy in the deprecation, as the
replacement (os.networkInterfaces()) is actually a method.
PR-URL: https://github.com/nodejs/node/pull/25280
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
This commit moves DEP0006, which has been runtime deprecated
since Node 0.11, to end of life status.
PR-URL: https://github.com/nodejs/node/pull/25279
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Ali Ijaz Sheikh <ofrobots@google.com>
This brings DEP0084 to End-of-Life. It is unlikely that this
has received much public usage in the first place, so removing
should be okay.
PR-URL: https://github.com/nodejs/node/pull/25138
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/25174
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Link to the cli docs for --tls-cipher-list, and link to and mention that
NODE_OPTIONS can also be used.
PR-URL: https://github.com/nodejs/node/pull/25174
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/25216
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
This commit makes multiple important changes:
1. A new key object API is introduced. The KeyObject class itself is
not exposed to users, instead, several new APIs can be used to
construct key objects: createSecretKey, createPrivateKey and
createPublicKey. The new API also allows to convert between
different key formats, and even though the API itself is not
compatible to the WebCrypto standard in any way, it makes
interoperability much simpler.
2. Key objects can be used instead of the raw key material in all
relevant crypto APIs.
3. The handling of asymmetric keys has been unified and greatly
improved. Node.js now fully supports both PEM-encoded and
DER-encoded public and private keys.
4. Conversions between buffers and strings have been moved to native
code for sensitive data such as symmetric keys due to security
considerations such as zeroing temporary buffers.
5. For compatibility with older versions of the crypto API, this
change allows to specify Buffers and strings as the "passphrase"
option when reading or writing an encoded key. Note that this
can result in unexpected behavior if the password contains a
null byte.
PR-URL: https://github.com/nodejs/node/pull/24234
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This commit exposes the value of --max-http-header-size
as a property of the http module.
PR-URL: https://github.com/nodejs/node/pull/24860
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Shelley Vohr <codebytere@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Allow the maximum size of HTTP headers to be overridden from
the command line.
co-authored-by: Matteo Collina <hello@matteocollina.com>
PR-URL: https://github.com/nodejs/node/pull/24811
Fixes: https://github.com/nodejs/node/issues/24692
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
This is necessary to distinguish them from other data types.
PR-URL: https://github.com/nodejs/node/pull/25046
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
Add an `inspectOptions` option to the `console` constructor. That
way it's possible to define all inspection defaults for each
`console` instance instead of relying on the `inspect()` defaults.
PR-URL: https://github.com/nodejs/node/pull/24978
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
This commit enables ESLint's no-useless-constructor rule. Note
that the documentation examples that only include constructor
calls were left in tact.
PR-URL: https://github.com/nodejs/node/pull/25055
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: Daijiro Wachi <daijiro.wachi@gmail.com>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/25058
Reviewed-By: Daijiro Wachi <daijiro.wachi@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Most people are going to use the existing option and switching the
name now comes with a cost which does not seem to justify the
improvement.
PR-URL: https://github.com/nodejs/node/pull/24982
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Currently it is not possible to inspect getters. To prevent any side
effects this should not become a default but under lots of
circumstances it would still be useful to inspect getters. This way
it is possible to actively opt into inspecting those.
PR-URL: https://github.com/nodejs/node/pull/24852
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Support the same PEM certificate formats for the ca: option to
tls.createSecureContext() that are supported by openssl when loading a
CAfile.
Fixes: https://github.com/nodejs/node/issues/24761
PR-URL: https://github.com/nodejs/node/pull/24733
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
TLS client authentication should be tested, including failure scenarios.
PR-URL: https://github.com/nodejs/node/pull/24733
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Add documentation about Worker class inherits from EventEmitter.
PR-URL: https://github.com/nodejs/node/pull/24849
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
This adds the `capitalized-comments` eslint rule to verify that
actual sentences use capital letters as starting letters. It ignores
special words and all lines below 62 characters.
PR-URL: https://github.com/nodejs/node/pull/24808
Reviewed-By: Sam Ruby <rubys@intertwingly.net>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Ujjwal Sharma <usharma1998@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
For new Agent() signature in http doc, list the supported options in
socket.connect().
Refs: https://github.com/nodejs/node/issues/24098
PR-URL: https://github.com/nodejs/node/pull/24846
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
This was missed when reverting a former commit. To make sure the
history is kept in place, this just adds a new entry to state the
revert.
PR-URL: https://github.com/nodejs/node/pull/24805
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
PR-URL: https://github.com/nodejs/node/pull/24847
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
The only known condition where we could not provide appropriate
stdio streams so far were non-console Windows applications.
Since this issue has come up a few times in our issue tracker now,
switch to providing dummy streams for these cases instead.
If there are other valid cases in which `uv_guess_handle` fails,
and where there is a more sensible way to provide stdio,
we’ll probably still find out because the streams don’t work
properly either way.
Refs: https://github.com/nodejs/help/issues/1251
PR-URL: https://github.com/nodejs/node/pull/20640
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
The examples show `process.stdout.fd` as a means to use synchronous
writes in async_hooks context. However this is an undocumented field,
so showcase a file write example instead.
Fixes: https://github.com/nodejs/node/issues/22873
PR-URL: https://github.com/nodejs/node/pull/24741
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Fill in correct pr-url: value in the YAML changelog that was missing
from f512f5ea. The stanza was also sorted in the wrong order, most
recent is supposed to be in the beginning of the changes, not the end.
PR-URL: https://github.com/nodejs/node/pull/24759
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
The `util.format()` behavior changed recently. Add the changes entry
to document the new BigInt behavior.
PR-URL: https://github.com/nodejs/node/pull/24758
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
The `console` functions rely on the `util.format()` behavior. It
did not follow the whatwg spec when it comes to symbols in combination
with the %d, %i and %f format specifiers. Using a symbol argument in
combination with one of these specifiers resulted in an error instead
of returning `'NaN'`. This is now fixed by this patch.
PR-URL: https://github.com/nodejs/node/pull/23708
Refs: https://console.spec.whatwg.org/#formatter
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
document that incoming cookie headers are joined using '; '.
PR-URL: https://github.com/nodejs/node/pull/24740
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
On Windows creating a symlink to a directory will not work unless extra
'dir' parameter is passed. This adds a check if link target is a
directory, and if so automatically use 'dir' when creating symlink.
PR-URL: https://github.com/nodejs/node/pull/23724
Refs: https://github.com/nodejs/node/pull/23691
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
This is a security release. All Node.js users should consult the security
release summary at:
https://nodejs.org/en/blog/vulnerability/november-2018-security-releases/
for details on patched vulnerabilities.
Fixes for the following CVEs are included in this release:
* Node.js: Denial of Service with large HTTP headers (CVE-2018-12121)
* Node.js: Slowloris HTTP Denial of Service (CVE-2018-12122 / Node.js)
* Node.js: Hostname spoofing in URL parser for javascript protocol
(CVE-2018-12123)
* OpenSSL: Timing vulnerability in DSA signature generation (CVE-2018-0734)
* OpenSSL: Timing vulnerability in ECDSA signature generation (CVE-2019-0735)
Notable Changes:
* deps: Upgrade to OpenSSL 1.1.0j, fixing CVE-2018-0734 and CVE-2019-0735
* http:
* Headers received by HTTP servers must not exceed 8192 bytes in total to
prevent possible Denial of Service attacks. Reported by Trevor Norris.
(CVE-2018-12121 / Matteo Collina)
* A timeout of 40 seconds now applies to servers receiving HTTP headers. This
value can be adjusted with `server.headersTimeout`. Where headers are not
completely received within this period, the socket is destroyed on the next
received chunk. In conjunction with `server.setTimeout()`, this aids in
protecting against excessive resource retention and possible Denial of
Service. Reported by Jan Maybach (liebdich.com).
* url: Fix a bug that would allow a hostname being spoofed when parsing URLs
with `url.parse()` with the `'javascript:'` protocol. Reported by
Martin Bajanik (kenticocloud.com). (CVE-2018-12123 / Matteo Collina)
PR-URL: https://github.com/nodejs-private/node-private/pull/156/
This is a security release. All Node.js users should consult the security
release summary at:
https://nodejs.org/en/blog/vulnerability/november-2018-security-releases/
for details on patched vulnerabilities.
Fixes for the following CVEs are included in this release:
* Node.js: Denial of Service with large HTTP headers (CVE-2018-12121)
* Node.js: Slowloris HTTP Denial of Service (CVE-2018-12122 / Node.js)
* Node.js: Hostname spoofing in URL parser for javascript protocol
(CVE-2018-12123)
* OpenSSL: Timing vulnerability in DSA signature generation (CVE-2018-0734)
* OpenSSL: Timing vulnerability in ECDSA signature generation (CVE-2019-0735)
Notable Changes:
* deps: Upgrade to OpenSSL 1.1.0j, fixing CVE-2018-0734 and CVE-2019-0735
* http:
* Headers received by HTTP servers must not exceed 8192 bytes in total to
prevent possible Denial of Service attacks. Reported by Trevor Norris.
(CVE-2018-12121 / Matteo Collina)
* A timeout of 40 seconds now applies to servers receiving HTTP headers. This
value can be adjusted with `server.headersTimeout`. Where headers are not
completely received within this period, the socket is destroyed on the next
received chunk. In conjunction with `server.setTimeout()`, this aids in
protecting against excessive resource retention and possible Denial of
Service. Reported by Jan Maybach (liebdich.com).
* url: Fix a bug that would allow a hostname being spoofed when parsing URLs
with `url.parse()` with the `'javascript:'` protocol. Reported by
Martin Bajanik (kenticocloud.com). (CVE-2018-12123 / Matteo Collina)
PR-URL: https://github.com/nodejs-private/node-private/pull/155/
This is a security release. All Node.js users should consult the security
release summary at:
https://nodejs.org/en/blog/vulnerability/november-2018-security-releases/
for details on patched vulnerabilities.
Fixes for the following CVEs are included in this release:
* Node.js: Denial of Service with large HTTP headers (CVE-2018-12121)
* Node.js: Slowloris HTTP Denial of Service (CVE-2018-12122 / Node.js)
* Node.js: Hostname spoofing in URL parser for javascript protocol
(CVE-2018-12123)
* Node.js: HTTP request splitting (CVE-2018-12116)
* OpenSSL: Timing vulnerability in DSA signature generation (CVE-2018-0734)
* OpenSSL: Microarchitecture timing vulnerability in ECC scalar multiplication
(CVE-2018-5407)
Notable Changes:
* deps: Upgrade to OpenSSL 1.0.2q, fixing CVE-2018-0734 and CVE-2018-5407
* http:
* Headers received by HTTP servers must not exceed 8192 bytes in total to
prevent possible Denial of Service attacks. Reported by Trevor Norris.
(CVE-2018-12121 / Matteo Collina)
* A timeout of 40 seconds now applies to servers receiving HTTP headers. This
value can be adjusted with `server.headersTimeout`. Where headers are not
completely received within this period, the socket is destroyed on the next
received chunk. In conjunction with `server.setTimeout()`, this aids in
protecting against excessive resource retention and possible Denial of
Service. Reported by Jan Maybach (liebdich.com).
* Two-byte characters are now strictly disallowed for the `path` option in
HTTP client requests. Paths containing characters outside of the range
`\u0021` - `\u00ff` will now be rejected with a `TypeError`. This behavior
can be reverted if necessary by supplying the
`--security-revert=CVE-2018-12116` command line argument (this is not
recommended). Reported as security concern for Node.js 6 and 8 by
Arkadiy Tetelman (lob.com), fixed by backporting a change by Benno
Fünfstück applied to Node.js 10 and later.
(CVE-2018-12116 / Matteo Collina)
* url: Fix a bug that would allow a hostname being spoofed when parsing URLs
with `url.parse()` with the `'javascript:'` protocol. Reported by
Martin Bajanik (kenticocloud.com). (CVE-2018-12123 / Matteo Collina)
PR-URL: https://github.com/nodejs-private/node-private/pull/154
This is a security release. All Node.js users should consult the security
release summary at:
https://nodejs.org/en/blog/vulnerability/november-2018-security-releases/
for details on patched vulnerabilities.
Fixes for the following CVEs are included in this release:
* Node.js: Debugger port 5858 listens on any interface by default
(CVE-2018-12120)
* Node.js: Denial of Service with large HTTP headers (CVE-2018-12121)
* Node.js: Slowloris HTTP Denial of Service (CVE-2018-12122 / Node.js)
* Node.js: Hostname spoofing in URL parser for javascript protocol
(CVE-2018-12123)
* Node.js: HTTP request splitting (CVE-2018-12116)
* OpenSSL: Timing vulnerability in DSA signature generation (CVE-2018-0734)
* OpenSSL: Microarchitecture timing vulnerability in ECC scalar multiplication
(CVE-2018-5407)
Notable Changes:
* debugger: Backport of https://github.com/nodejs/node/pull/8106 to
prevent the debugger from listening on `0.0.0.0`. It now defaults to
`127.0.0.1`. Reported by Ben Noordhuis. (CVE-2018-12120 / Ben Noordhuis).
* deps: Upgrade to OpenSSL 1.0.2q, fixing CVE-2018-0734 and CVE-2018-5407
* http:
* Headers received by HTTP servers must not exceed 8192 bytes in total to
prevent possible Denial of Service attacks. Reported by Trevor Norris.
(CVE-2018-12121 / Matteo Collina)
* A timeout of 40 seconds now applies to servers receiving HTTP headers. This
value can be adjusted with `server.headersTimeout`. Where headers are not
completely received within this period, the socket is destroyed on the next
received chunk. In conjunction with `server.setTimeout()`, this aids in
protecting against excessive resource retention and possible Denial of
Service. Reported by Jan Maybach (liebdich.com).
(CVE-2018-12122 / Matteo Collina)
* Two-byte characters are now strictly disallowed for the `path` option in
HTTP client requests. Paths containing characters outside of the range
`\u0021` - `\u00ff` will now be rejected with a `TypeError`. This behavior
can be reverted if necessary by supplying the
`--security-revert=CVE-2018-12116` command line argument (this is not
recommended). Reported as security concern for Node.js 6 and 8 by
Arkadiy Tetelman (lob.com), fixed by backporting a change by Benno
Fünfstück applied to Node.js 10 and later.
(CVE-2018-12116 / Matteo Collina)
* url: Fix a bug that would allow a hostname being spoofed when parsing
URLs with `url.parse()` with the `'javascript:'` protocol. Reported by
Martin Bajanik (kenticocloud.com). (CVE-2018-12123 / Matteo Collina)
PR-URL: https://github.com/nodejs-private/node-private/pull/153
CVE-2018-12122
An attacker can send a char/s within headers and exahust the resources
(file descriptors) of a system even with a tight max header length
protection. This PR destroys a socket if it has not received the headers
in 40s.
PR-URL: https://github.com/nodejs-private/node-private/pull/144
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
This was missed when the function was added. As it
is experimental in the code it should also be
experimental in the docs.
Fixes: https://github.com/nodejs/node/issues/24509
PR-URL: https://github.com/nodejs/node/pull/24572
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
The existing secureProtocol option only allows setting the allowed
protocol to a specific version, or setting it to "all supported
versions". It also used obscure strings based on OpenSSL C API
functions. Directly setting the min or max is easier to use and explain.
PR-URL: https://github.com/nodejs/node/pull/24405
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
For TCP servers, the dual-stack support is enable by default, i.e.
binding host "::" will also make "0.0.0.0" bound. This commit add
ipv6Only option in `net.Server.listen()` and `dgram.createSocket()`
methods which allows to disable dual-stack support. Support for
cluster module is also provided in this commit.
Fixes: https://github.com/nodejs/node/issues/17664
PR-URL: https://github.com/nodejs/node/pull/23798
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
This commit adds the missing environment variable
NODE_DEBUG_NATIVE to the CLI API docs.
PR-URL: https://github.com/nodejs/node/pull/24383
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Ouyang Yadong <oyydoibh@gmail.com>
Reviewed-By: Weijia Wang <starkwang@126.com>
Reviewed-By: Franziska Hinkelmann <franziska.hinkelmann@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Improve markup and return value description.
PR-URL: https://github.com/nodejs/node/pull/24533
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
For symmetricality with the EC public key info, and because its useful.
PR-URL: https://github.com/nodejs/node/pull/24358
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
X.509 certs are provided to the user in a parsed object form by a number
of TLS APIs. Include public key info for elliptic curves as well, not
just RSA.
- pubkey: the public key
- bits: the strength of the curve
- asn1Curve: the ASN.1 OID for the curve
- nistCurve: the NIST nickname for the curve, if it has one
PR-URL: https://github.com/nodejs/node/pull/24358
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Cross-reference the secureProtocol docs and the CLI docs for --tls-v1.0
and --tls-v1.1 and describe relationship. Make clear that --tls-v1.0
enables TLSv1.0 and TLSv1.1.
PR-URL: https://github.com/nodejs/node/pull/24386
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Ujjwal Sharma <usharma1998@gmail.com>
Updated Cipher and Decipher examples to not use deprecated
`crypto.createCipher` and `crypto.createDecipher` in examples and
instead use `createCipheriv` and `createDecipheriv`.
Fixes: https://github.com/nodejs/node/issues/24046
PR-URL: https://github.com/nodejs/node/pull/24107
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Ujjwal Sharma <usharma1998@gmail.com>
One of the comments we got at the N-API workshop
at NodeConfEU was that we should have a better link to
node-addon-api and the docs in the main API docs for
N-API. The goal being to help people find node-addon-api
and potentially start with the node-addon-api docs
instead if they are using C++.
This expands and strengthens the link along with a
recommendation that starting with the node-addon-api
docs might make sense.
PR-URL: https://github.com/nodejs/node/pull/24371
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Franziska Hinkelmann <franziska.hinkelmann@gmail.com>
This reverts commit ac7450a09a.
This fully reverts the changes to util.inspect depth.
It has caused breakage in logging to existing apps, and even
something as simple as `console.log(require)` will cause >1m freezes.
I've heard nothing but negative feedback (seriously not a single
person has expressed anything positive about this change) and
personally i find this change extremely annoying.
PR-URL: https://github.com/nodejs/node/pull/24326
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Franziska Hinkelmann <franziska.hinkelmann@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: John-David Dalton <john.david.dalton@gmail.com>
Use the same property name as http2 does to indicate that
the stream is in the state before the `ready` event is emitted.
PR-URL: https://github.com/nodejs/node/pull/24067
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Minwoo Jung <minwoo@nodesource.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This commit documents the NODE_TLS_REJECT_UNAUTHORIZED
environment variable so that the world can know how
potentially dangerous it is.
PR-URL: https://github.com/nodejs/node/pull/24289
Fixes: https://github.com/nodejs/node/issues/24284
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/24357
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Adjust to work with self-signed certificates, and certificates that do
not name "localhost" as their host name.
Removed duplicate examples, they differed only by using `pfx`. Its not
necessary to show every option, and we don't, and the example wouldn't
work with most pfx anyway, since it didn't specify a password.
PR-URL: https://github.com/nodejs/node/pull/24235
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ujjwal Sharma <usharma1998@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/24301
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Correct the output of async_hooks samples
* `TIMERWRAP` has been removed in #20894
* `console.log()` doesn't issue `TTYWRAP` nor `SIGNALWRAP`
I don't know which PR caused that `console.log()` is no longer using
`TTYWRAP` and `SIGNALWRAP`; I think it was between 8.4.0 and 8.5.0.
PR-URL: https://github.com/nodejs/node/pull/24050
Refs: https://github.com/nodejs/node/pull/20894
Reviewed-By: James M Snell <jasnell@gmail.com>
* Replace `console.error()` with `console.log()`.
* Fix case and punctuation in logged output.
PR-URL: https://github.com/nodejs/node/pull/24112
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Currently there are a number of compiler warnings like the following:
../binding.cc:6:41:
warning: 'NewFromUtf8' is deprecated:
Use maybe version [-Wdeprecated-declarations]
args.GetReturnValue().Set(v8::String::NewFromUtf8(isolate, "world"));
^
/node/deps/v8/include/v8.h:2883:10:
note: 'NewFromUtf8' has been explicitly marked deprecated here
static V8_DEPRECATE_SOON(
^
/node/deps/v8/include/v8config.h:341:29:
note: expanded from macro 'V8_DEPRECATE_SOON'
declarator __attribute__((deprecated(message)))
^
This commit updates the code to use the maybe versions.
PR-URL: https://github.com/nodejs/node/pull/24216
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
host names are DNS names, host addresses are IP addresses, and `host`
arguments and options can be either.
PR-URL: https://github.com/nodejs/node/pull/24199
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Docs should describe the purpose of the option.
PR-URL: https://github.com/nodejs/node/pull/24236
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
This fixes the incorrect enumerations of their possible values, which
weren't up to date with the values actually supported. Also renamed
two arguments that used "format" when they meant "encoding".
PR-URL: https://github.com/nodejs/node/pull/24230
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Simplify text. Add explanation that `code` is the most stable way to
identify an error, in contrast with `message` which is subject to change
between patch-level versions of Node.js. Synchronize list of properties
with text. Order properties alphabetically.
PR-URL: https://github.com/nodejs/node/pull/24090
Fixes: https://github.com/nodejs/node/issues/23975
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
posix -> POSIX
platform specific -> platform-specific
PR-URL: https://github.com/nodejs/node/pull/24118
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
This updates the documentation
to clarify how to use `timeout`
in the vm module.
PR-URL: https://github.com/nodejs/node/pull/23512
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Implement several minor grammar, punctuation, and style fixes in
stream.md.
PR-URL: https://github.com/nodejs/node/pull/24116
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/24074
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
In particular, this value is `true` and not `false`
between calling `connect()` and the operation finishing.
PR-URL: https://github.com/nodejs/node/pull/24066
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Throw an exception instead of crashing when attempting to create
`Buffer` objects from a Context that is not associated with
a Node.js `Environment`.
Possible alternatives for the future might be just returning
a plain `Uint8Array`, or working on providing `Buffer` for all
`Context`s.
PR-URL: https://github.com/nodejs/node/pull/23938
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
This commit supplements some types and their corresponding return
values in docs, including `AsyncResource`, `DiffieHellman`,
`ECDH`, `https.Server`, `repl.REPLServer`.
PR-URL: https://github.com/nodejs/node/pull/23998
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Per branding guidelines from the Foundation, use Node.js and not Node.
PR-URL: https://github.com/nodejs/node/pull/23967
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Matheus Marchini <mat@mmarchini.me>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Franziska Hinkelmann <franziska.hinkelmann@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
This commit allow passing `TypedArray` and `DataView` to:
- v8.deserialize()
- new v8.Deserializer()
- v8.serializer.writeRawBytes()
PR-URL: https://github.com/nodejs/node/pull/23953
Refs: https://github.com/nodejs/node/issues/1826
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Refael Ackermann <refack@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/23970
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
It can't be idiomatic if it's not in general use and therefore hasn't
been picked up by users. It's not even in browsers yet.
"Idiomatic" use is an emergent property that comes from observed use
and this feature is so new (to browsers and Node) that it can't
possibly be. In general I don't think it's the place of the Node API
docs to observe what emerges as idiomatic Node.js.
It also can't be a recommended feature (if that was the intent of the
language) because it's marked experimental. For now, it's just a
feature, nothing more. Recommendations and/or observations about it
being 'idiomatic' can come later.
PR-URL: https://github.com/nodejs/node/pull/23885
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Yuta Hiroto <hello@hiroppy.me>
Reviewed-By: Matheus Marchini <mat@mmarchini.me>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
We removed the mailing list from the README and other places quite some
time ago. Core devs don't monitor it much. However, it is still linked
in a couple places in the docs directory. Remove those links.
PR-URL: https://github.com/nodejs/node/pull/23932
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Previously only V8 options supported both dashes in them (making them
equivalent), but now Node.js also supports both styles so the note can
be removed.
PR-URL: https://github.com/nodejs/node/pull/23903
Refs: https://github.com/nodejs/node/pull/18592
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: George Adams <george.adams@uk.ibm.com>
The deprecation code was not updated when landing the PR.
PR-URL: https://github.com/nodejs/node/pull/23883
Refs: https://github.com/nodejs/node/pull/23760
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Matheus Marchini <mat@mmarchini.me>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Make fs.open() and fs.openSync() more economic to use by making the
flags argument optional. You can now write:
fs.open(file, cb)
Instead of the more verbose:
fs.open(file, 'r', cb)
This idiom is already supported by functions like fs.readFile().
PR-URL: https://github.com/nodejs/node/pull/23767
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
This function was undocumented and only used in one place
throughout the codebase, plus a test.
PR-URL: https://github.com/nodejs/node/pull/23820
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/23864
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This is an undocumented utility function that is of questionable
utility.
Fixes: https://github.com/nodejs/node/issues/18391
PR-URL: https://github.com/nodejs/node/pull/23760
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Using `process.nextTick()`, `Promise`, or `queueMicrotask()`, it
is possible to escape the `timeout` set when running code with
`vm.runInContext()`, `vm.runInThisContext()`, and
`vm.runInNewContext()`.
This documents the issue and adds three known_issues tests.
Refs: https://github.com/nodejs/node/issues/3020
PR-URL: https://github.com/nodejs/node/pull/23743
Refs: https://github.com/nodejs/node/issues/3020
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Forbid modifying tracing state from worker threads, either
through the built-in module or inspector sessions, since
the main thread owns all global state, and at least
the `async_hooks` integration is definitely not thread
safe in its current state.
PR-URL: https://github.com/nodejs/node/pull/23781
Fixes: https://github.com/nodejs/node/issues/22767
Refs: https://github.com/nodejs/node/issues/22513
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Matheus Marchini <mat@mmarchini.me>
`Set-Cookie` is a response header, replace it with `Cookie`.
PR-URL: https://github.com/nodejs/node/pull/23707
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/23794
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Matheus Marchini <mat@mmarchini.me>
PR-URL: https://github.com/nodejs/node/pull/23810
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Yuta Hiroto <hello@hiroppy.me>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Add the `node.console` trace event category to capture
`console.count()`, `console.countReset()`, `console.time()`,
`console.timeLog()`, and `console.timeEnd()` to the trace
event log.
PR-URL: https://github.com/nodejs/node/pull/23703
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
In order to better match the browser behaviour, run nextTicks (and
subsequently the microtask queue) after each individual Timer and
Immediate, rather than after the whole list is processed. The
current behaviour is somewhat of a performance micro-optimization
and also partly dictated by how timer handles were implemented.
PR-URL: https://github.com/nodejs/node/pull/22842
Fixes: https://github.com/nodejs/node/issues/22257
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Two changes here which bring us closer to the console standard:
- Arguments to `util.format` are no longer formatted differently
depending on their order, with format strings being an exception.
- Format specifier formatting is now only triggered if the string
actually contains a format string.
Under the hood, we now use a single shared function to format the given
arguments which will make the code easier to read and modify.
PR-URL: https://github.com/nodejs/node/pull/23162
Fixes: https://github.com/nodejs/node/issues/23137
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Fixes one WHATWG URL example to match the actual behavior.
PR-URL: https://github.com/nodejs/node/pull/23359
Fixes: https://github.com/nodejs/node/issues/22653
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Now it points to the actual pr, not to /compare/.
PR-URL: https://github.com/nodejs/node/pull/23359
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This fixes links that were broken due to inclusion of the trailing dot.
Also simplifies a pair of occurances of []().
PR-URL: https://github.com/nodejs/node/pull/23359
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This paves way for making `bytesRead` consistent with all other
Node.js streams that provide a property with this name.
PR-URL: https://github.com/nodejs/node/pull/23308
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
ContextifyContext::CompileFunction in src/node_contextify.cc
was incorrectly passing the context variable to
ScriptCompiler::CompileFunctionInContext
This meant that the parsingContext option in vm.compileFunction
was not being applied properly to the compiled function.
fixes: https://github.com/nodejs/node/issues/23194
doc: clarify parsingContext option for vm.compileScript
test: usage of parsingContext in vm.compileFunction
PR-URL: https://github.com/nodejs/node/pull/23206
Fixes: https://github.com/nodejs/node/issues/23194
Reviewed-By: Ujjwal Sharma <usharma1998@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Currently there are compiler warnings is emitted:
../addon.cc:17:58:
warning: 'ToString' is deprecated:
Use maybe version [-Wdeprecated-declarations]
obj->Set(String::NewFromUtf8(isolate, "msg"),
args[0]->ToString(isolate));
^
deps/v8/include/v8.h:2537:3:
note: 'ToString' has been explicitly marked deprecated here
V8_DEPRECATED("Use maybe version",
^
This commit updates examples to use the non-deprecated versions.
PR-URL: https://github.com/nodejs/node/pull/23323
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Remove use of personal pronoun _you_ from formal documentation for
`process`. Fix up grammar in nearby text.
PR-URL: https://github.com/nodejs/node/pull/23347
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Per the Style Guide, remove the use of the personal pronoun _you_ from
the formal API documentation for `worker_threads`.
PR-URL: https://github.com/nodejs/node/pull/23347
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Per the Style Guide, remove the use of the personal pronoun _you_ from
the formal API documentation for `domain`.
PR-URL: https://github.com/nodejs/node/pull/23347
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Notable changes:
* assert
* The diff output is now a tiny bit improved by sorting object
properties when inspecting the values that are compared with each
other. https://github.com/nodejs/node/pull/22788
* cli
* The options parser now normalizes `_` to `-` in all multi-word
command-line flags, e.g. `--no_warnings` has the same effect as
`--no-warnings`. https://github.com/nodejs/node/pull/23020
* Added bash completion for the `node` binary. To generate a bash
completion script, run `node --completion-bash`. The output can be
saved to a file which can be sourced to enable completion.
https://github.com/nodejs/node/pull/20713
* crypto
* Added support for PEM-level encryption.
https://github.com/nodejs/node/pull/23151
* Added an API asymmetric key pair generation. The new methods
`crypto.generateKeyPair` and `crypto.generateKeyPairSync` can be
used to generate public and private key pairs. The API supports
RSA, DSA and EC and a variety of key encodings (both PEM and DER).
https://github.com/nodejs/node/pull/22660
* fs
* Added a `recursive` option to `fs.mkdir` and `fs.mkdirSync`. If
this option is set to true, non-existing parent folders will be
automatically created. https://github.com/nodejs/node/pull/21875
* http2
* Added a `'ping'` event to `Http2Session` that is emitted whenever a
non-ack `PING` is received.
https://github.com/nodejs/node/pull/23009
* Added support for the `ORIGIN` frame.
https://github.com/nodejs/node/pull/22956
* Updated nghttp2 to 1.34.0. This adds RFC 8441 extended connect
protocol support to allow use of WebSockets over HTTP/2.
https://github.com/nodejs/node/pull/23284
* module
* Added `module.createRequireFromPath(filename)`. This new method can
be used to create a custom require function that will resolve
modules relative to the filename path.
https://github.com/nodejs/node/pull/19360
* process
* Added a `'multipleResolves'` process event that is emitted whenever
a `Promise` is attempted to be resolved multiple times, e.g. if the
`resolve` and `reject` functions are both called in a `Promise`
executor. https://github.com/nodejs/node/pull/22218
* url
* Added `url.fileURLToPath(url)` and `url.pathToFileURL(path)`. These
methods can be used to correctly convert between file: URLs and
absolute paths. https://github.com/nodejs/node/pull/22506
* util
* Added the `sorted` option to `util.inspect()`. If set to `true`,
all properties of an object and Set and Map entries will be sorted
in the returned string. If set to a function, it is used as a
compare function. https://github.com/nodejs/node/pull/22788
* The `util.instpect.custom` symbol is now defined in the global
symbol registry as `Symbol.for('nodejs.util.inspect.custom')`.
https://github.com/nodejs/node/pull/20857
* Added support for `BigInt` numbers in `util.format()`.
https://github.com/nodejs/node/pull/22097
* V8 API
* A number of V8 C++ APIs have been marked as deprecated since they
have been removed in the upstream repository. Replacement APIs
are added where necessary. https://github.com/nodejs/node/pull/23159
* Windows
* The Windows msi installer now provides an option to automatically
install the tools required to build native modules.
https://github.com/nodejs/node/pull/22645
* Workers
* Debugging support for Workers using the DevTools protocol has been
implemented. https://github.com/nodejs/node/pull/21364
* The public `inspector` module is now enabled in Workers.
https://github.com/nodejs/node/pull/22769
* Added new collaborators:
* digitalinfinity - Hitesh Kanwathirtha
PR-URL: https://github.com/nodejs/node/pull/23313
`util.format` and `console.log` now support BigInt via the existing
format specifiers `%i` and `%d`.
PR-URL: https://github.com/nodejs/node/pull/22097
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: James M Snell <jasnell@gmail.com>
Provides a link from the N-API reference to the guide discussing ABI
stability in greater depth.
Re: https://github.com/nodejs/abi-stable-node/issues/332
PR-URL: https://github.com/nodejs/node/pull/23287/
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
It appears that a `to` was left out in one sentence of the streams.md
doc. Add it.
PR-URL: https://github.com/nodejs/node/pull/23306
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Refer to Node.js versions without a prepended `v`. This was standardized
on previously to avoid confusion between Node.js 8 and the V8 JavaScript
engine. (`Node.js 8` is clear. `v8` or even `Node.js v8`, not so much.)
PR-URL: https://github.com/nodejs/node/pull/23306
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
In tls module, accept ArrayBuffer/DataView in place of isUint8Array in
the source code & related test code in "test-tls-basic-validations.js",
per the "tls" item in the checklist of the comment in #1826.
PR-URL: https://github.com/nodejs/node/pull/23210
Refs: https://github.com/nodejs/node/issues/1826
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Denys Otrishko <shishugi@gmail.com>
Correct parameter name for `napi_is_error` description.
PR-URL: https://github.com/nodejs/node/pull/23310
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
- Document `defaultEncoding`. This was previously undocumented.
- Clarify `decodeStrings`. In particular, the previous description was
talking about decoding, which matches the unfortunate option name,
but what actually happens is usually refererred to as encoding
a string into a binary form.
PR-URL: https://github.com/nodejs/node/pull/23246
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
We can `dns.lookup` a falsy `hostname` like `dns.lookup(false)`
for the reason of backwards compatibility long before(see #13119
for detail). This behavior is undocumented and seems useless in
real world apps.
We could also make invalid `hostname` throw in the future and the
change might be semver-major.
Fixes: https://github.com/nodejs/node/issues/13119
PR-URL: https://github.com/nodejs/node/pull/23173
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Denys Otrishko <shishugi@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Allow reading from stdio streams that are conventionally
associated with process output, since this is only convention.
This involves disabling the oddness around closing stdio
streams. Its purpose is to prevent the file descriptors
0 through 2 from being closed, since doing so can lead
to information leaks when new file descriptors are being
opened; instead, not doing anything seems like a more
reasonable choice.
Fixes: https://github.com/nodejs/node/issues/21203
PR-URL: https://github.com/nodejs/node/pull/23053
Reviewed-By: James M Snell <jasnell@gmail.com>
worker.kill() relies on a graceful disconnect, which might not
always be possible. This commit calls this out in the docs, and
specifies worker.process.kill() as a non-graceful alternative.
PR-URL: https://github.com/nodejs/node/pull/23165
Fixes: https://github.com/nodejs/node/issues/22703
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
The current default is not ideal in most use cases. Therefore it is
changed to inspect objects to a maximum depth of 20 in case
util.inspect is called with it's defaults. The default is kept at 2
when using console.log() and similar in the repl.
PR-URL: https://github.com/nodejs/node/pull/17907
Refs: https://github.com/nodejs/node/issues/12693
PR-URL: https://github.com/nodejs/node/pull/22846
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Denys Otrishko <shishugi@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
This vagueness of 'may' has caused a great deal of confusion.
See https://stackoverflow.com/questions/8887318
PR-URL: https://github.com/nodejs/node/pull/23143
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: John-David Dalton <john.david.dalton@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/23166
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Aliases are very cheap to maintain, so an unconditional runtime
deprecation that affects existing ecosystem code is not
a good idea. This commit turns the runtime deprecation into
a `--pending-deprecation` one.
Fixes: https://github.com/nodejs/node/issues/23013
PR-URL: https://github.com/nodejs/node/pull/23017
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Remove ERR_INDEX_OUT_OF_RANGE in favor of ERR_OUT_OF_RANGE which is
capable of providing more detail. (In one instance, use
ERR_BUFFER_OUT_OF_BOUNDS which is more accurate in that one instance.)
PR-URL: https://github.com/nodejs/node/pull/22969
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Weijia Wang <starkwang@126.com>
The current message says 'Port should be > 0' meaning '0' is an
invalid value. You can pass '0' to get a random port from the system.
The correct message for this error is 'Port should be >= 0'.
PR-URL: https://github.com/nodejs/node/pull/23015
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
This allows for option syntax similar to V8’s one, e.g.
`--no_warnings` has the same effect as `--no-warnings`.
PR-URL: https://github.com/nodejs/node/pull/23020
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
This adds the `multipleResolves` event to track promises that resolve
more than once or that reject after resolving.
It is important to expose this to the user to make sure the
application runs as expected. Without such warnings it would be very
hard to debug these situations.
PR-URL: https://github.com/nodejs/node/pull/22218
Fixes: https://github.com/nodejs/promises-debugging/issues/8
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Franziska Hinkelmann <franziska.hinkelmann@gmail.com>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
The thread_finalize_data and thread_finalize_cb parameters in
napi_create_threadsafe_function are optional.
PR-URL: https://github.com/nodejs/node/pull/22998
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Workers support `stdio` streams since the initial PR landed. These
lines are editing leftovers from before that and should be removed.
PR-URL: https://github.com/nodejs/node/pull/23054
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Setting ecdhCurve to false is already unsupported, so the deprecation
should already be EOL. The test was skipped ever since we upgraded to
OpenSSL 1.1.0.
PR-URL: https://github.com/nodejs/node/pull/22953
Refs: https://github.com/nodejs/node/pull/16130
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
In V8 7.0, the array sorting algorithm was changed to Timsort, which
is stable. A compare function returning only `true` or `false`
(converted to 0 and 1) cannot work properly.
PR-URL: https://github.com/nodejs/node/pull/22992
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Kyle Farnung <kfarnung@microsoft.com>
Add links to the class definition for repl.ReplServer in places where it
would be helpful.
PR-URL: https://github.com/nodejs/node/pull/23005
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Calling setAuthTag multiple times can result in hard to detect bugs
since to the user, it is unclear which invocation actually affected
OpenSSL.
PR-URL: https://github.com/nodejs/node/pull/22931
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ujjwal Sharma <usharma1998@gmail.com>
This commit adds a --completion-bash option to node which can be
sourced to provide bash code completion for node options.
Usage:
$ node --completion-bash > node_bash_completion
$ source node_bash_completion
$ node --[tab]
PR-URL: https://github.com/nodejs/node/pull/20713
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Denys Otrishko <shishugi@gmail.com>
This adds support for RSA, DSA and EC key pair generation with a
variety of possible output formats etc.
PR-URL: https://github.com/nodejs/node/pull/22660
Fixes: https://github.com/nodejs/node/issues/15116
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ujjwal Sharma <usharma1998@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
PR-URL: https://github.com/nodejs/node/pull/22949
Refs: https://github.com/nodejs/node/pull/21616
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/22949
Refs: https://github.com/nodejs/node/pull/21875
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/22949
Refs: https://github.com/nodejs/node/pull/14731
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
I assume that permitting digest === null was unintentional when
digest === undefined was deprecated since their behavior was
equivalent. The sha1 default for digest === null has somehow made it
through refactoring of the PBKDF2 module multiple times, even though
digest === undefined has been EOL for some time now.
This change deprecates setting digest to null so we can fix the
behavior in Node.js 12 or so.
PR-URL: https://github.com/nodejs/node/pull/22861
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
The order option can be used to sort the inspected values in case
they do not rely on their order as arrays. That way the output is
stable no matter of the object property inspection order.
PR-URL: https://github.com/nodejs/node/pull/22788
Refs: https://github.com/nodejs/node/issues/22763
Reviewed-By: John-David Dalton <john.david.dalton@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Currently the documentation for Wrapping C++ Objects doesn't explain
how to destruct an object by explicitly invoking the garbage collector.
This commit includes a modification to docs that explains how to force
the garbage collector to clear objects using V8's command line flags.
Fixes: https://github.com/nodejs/node/issues/19876
PR-URL: https://github.com/nodejs/node/pull/20431
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Yang Guo <yangguo@chromium.org>
1) Remove 'callback' in 'check' function, because we don't check or use
that directly.
2) Make 'digest' clearer in the documentation.
PR-URL: https://github.com/nodejs/node/pull/22858
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Indicates is the END_STREAM flag was set on the received HEADERS frame
PR-URL: https://github.com/nodejs/node/pull/22843
Fixes: https://github.com/nodejs/node/issues/22497
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/22866
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
New default timeout values of "2 minutes" were added into documentation
inside 2 classes under "Event: 'timeout'":
1) Class: Http2SecureServer
2) Class: Http2Server
New sections for `.setTimeout()` method were added inside
`Http2SecureServer` & `Http2Server` docs.
PR-URL: https://github.com/nodejs/node/pull/22798
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
The maximum hard limit that `util.inspect()` could theoretically handle
is the maximum string size. That is ~2 ** 28 on 32 bit systems and
~2 ** 30 on 64 bit systems.
Due to the recursive algorithm a complex object could easily exceed
that limit without throwing an error right away and therefore
crashing the application by exceeding the heap limit.
`util.inspect()` is fast enough to compute 128 MB of data below one
second on an Intel(R) Core(TM) i7-5600U CPU. This hard limit allows
to inspect arbitrary big objects from now on without crashing the
application or blocking the event loop significantly.
PR-URL: https://github.com/nodejs/node/pull/22756
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: John-David Dalton <john.david.dalton@gmail.com>
Add `napi_add_finalizer()`, which provides the ability to attach data
to an arbitrary object and be notified when that object is garbage-
collected so as to have an opportunity to delete the data previously
attached.
This differs from `napi_wrap()` in that it does not use up the private
slot on the object, and is therefore neither removable, nor retrievable
after the call to `napi_add_finalizer()`. It is assumed that the data
is accessible by other means, yet it must be tied to the lifetime of
the object. This is the case for data passed to a dynamically created
function which is itself heap-allocated and must therefore be freed
along with the function.
Fixes: https://github.com/nodejs/abi-stable-node/issues/313
PR-URL: https://github.com/nodejs/node/pull/22244
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
PR-URL: https://github.com/nodejs/node/pull/22747
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Vladimir de Turckheim <vlad2t@hotmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
I tried to manually reconstruct the history of deprecations and to
track them down to their origins. Having these documented publicly
makes it much easier to find out when deprecations were introduced
or changed.
PR-URL: https://github.com/nodejs/node/pull/22766
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: James M Snell <jasnell@gmail.com>
This fixes the officially accepted message types for `assert.throws()`,
`assert.rejects()`, `assert.doesNotThrow()` and
`assert.doesNotReject()`. It also renames the `block` argument in
those functions to `fn` and `promiseFn` for further clarity.
PR-URL: https://github.com/nodejs/node/pull/22692
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: George Adams <george.adams@uk.ibm.com>
When close() is called on a readline instance, it is possible
that data is already buffered, and will trigger 'line' events.
This commit adds a warning to the corresponding docs. Note that
a similar warning already exists for the pause() method.
PR-URL: https://github.com/nodejs/node/pull/22679
Fixes: https://github.com/nodejs/node/issues/22615
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: George Adams <george.adams@uk.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
On Windows, normalizeSpawnArguments set "/d /s /c" for any shells.
It cause exec and other methods are limited to cmd.exe as a shell.
Powershell and git-bash are often used instead of cmd.exe,
and they can recieve "-c" switch like unix shells.
So normalizeSpawnArguments is changed to set "/d /s /c" for cmd.exe,
and "-c" for others.
Fixes: https://github.com/nodejs/node/issues/21905
PR-URL: https://github.com/nodejs/node/pull/21943
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: João Reis <reis@janeasystems.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Checking all boxed primitives individually requires to cross the C++
barrier multiple times besides being more complicated than just a
single check.
PR-URL: https://github.com/nodejs/node/pull/22620
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: John-David Dalton <john.david.dalton@gmail.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
native V8 coverage reports can now be written to disk by setting the
variable NODE_V8_COVERAGE=dir
PR-URL: https://github.com/nodejs/node/pull/22527
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Yang Guo <yangguo@chromium.org>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
Mention that ABI stability can be achieved only by linking to ABI-
stable parts of Node.js and to other libraries which are ABI-stable.
PR-URL: https://github.com/nodejs/node/pull/22508
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
- Clarify that a `Readable` stream's reading mode (paused vs. flowing)
is independent of its object mode (object vs. non-object). I am
relatively new to Node streams, and was briefly confused while
reading the docs by the two uses of the word "mode".
- Copyediting: add missing apostrophes; minor grammatical changes
PR-URL: https://github.com/nodejs/node/pull/22619
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Denys Otrishko <shishugi@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
The `options` argument to `tls.createSecureContext()` is optional.
Indicate this by using `[` and `]` in the function signature.
PR-URL: https://github.com/nodejs/node/pull/22545
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: George Adams <george.adams@uk.ibm.com>
Options are, by definition, optional. Remove specification of some
options as "optional".
PR-URL: https://github.com/nodejs/node/pull/22545
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: George Adams <george.adams@uk.ibm.com>
The text contained a number of inaccuracies:
- The main thread is never blocked by a stream close.
- There is no such thing as an EOF character on the OS level,
the libuv level, or the Node.js stream level.
- These streams *do* respond to `.close()`, but pending
reads can delay this indefinitely.
- Pushing a random character into the stream works only when
the source data can be controlled; Using the JS `.push()`
method is something different, and does not “unblock” any threads.
Refs: https://github.com/nodejs/node/pull/21212
PR-URL: https://github.com/nodejs/node/pull/22569
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Adds a method compileFunction to the vm module, which serves as a
binding for v8::CompileFunctionInContext with appropriate args for
specifying the details, and provide params for the wrapper.
Eventually, we would be changing Module._compile to use this internally
over the standard Module.wrap
PR-URL: https://github.com/nodejs/node/pull/21571
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: John-David Dalton <john.david.dalton@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: James M Snell <jasnell@gmail.com>
Some nits were also fixed in passing.
PR-URL: https://github.com/nodejs/node/pull/22537
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
charcter device streaming works just like any other streams, but hangs
on the close callsite due to the worker thread being blocked on the read
and main thread waiting for any async event that may not occur.
Document this behavior and suggest a potential workaround.
Fixes: https://github.com/nodejs/node/issues/15439
PR-URL: https://github.com/nodejs/node/pull/21212
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
doc: Update child_process docs, stating typed arrays are allowed.
error: Update error message for `ERR_INVALID_SYNC_FORK_INPUT`
lib: Use isArrayBufferView instead of isUint8Array
test: Update test-child-process-spawnsync-input to test for all
typed arrays and data view.
PR-URL: https://github.com/nodejs/node/pull/22409
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Remove `It is important to note that` and italics from `waitForTrailers`
sentences.
PR-URL: https://github.com/nodejs/node/pull/22541
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
`process.allowedNodeEnvironmentFlags` provides an API to validate and
list flags as specified in `NODE_OPTIONS` from user code.
Refs: https://github.com/nodejs/node/issues/17740
Signed-off-by: Christopher Hiller <boneskull@boneskull.com>
PR-URL: https://github.com/nodejs/node/pull/19335
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: John-David Dalton <john.david.dalton@gmail.com>
Reviewed-By: Sam Ruby <rubys@intertwingly.net>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
We don't know what will return when successful or failure for
the callback of the function. So this commit makes it more detailled.
PR-URL: https://github.com/nodejs/node/pull/22366
Refs: https://github.com/nodejs/node/issues/22322
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
This change avoid an 'read ENOTCONN' error introduced by libuv 1.20.0
when trying to read from a TTY WriteStream. Instead, we are throwing
a more actionable ERR_TTY_WRITABLE_NOT_READABLE.
Fixes: https://github.com/nodejs/node/issues/21203
PR-URL: https://github.com/nodejs/node/pull/21654
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Shingo Inoue <leko.noor@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Make the callback mandatory as mostly done in all other Node.js
callback APIs so users explicitly have to decide what to do in error
cases.
This also documents the options for `Stream.finished()`.
When originally implemented it was missed that Stream.finished() has
an optional options object.
PR-URL: https://github.com/nodejs/node/pull/21058
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Mathias Buus <mathiasbuus@gmail.com>
Update the N-API documentation to reflect that wrapping no longer
affects the object's prototype chain.
PR-URL: https://github.com/nodejs/node/pull/22363
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Minwoo Jung <minwoo@nodesource.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
1. All default values for optional `encoding` parameters
were documented except for the one in `fs.write(fd, string...)`
method. This PR makes up this deficiency.
2. We have two variants of `fs.write()` / `fs.writeSync()` methods:
for buffers and strings. Currently, the sync methods have only one
common reference to the full description of async methods.
However, the link may seem to belong to the last sync variant only
(for strings) and, as it refers to the first async variant
(for buffers), this may be confusing. This PR makes two different
sync variants refer to two different async variants.
3. In passing, both returned values of sync methods were also made
more concise and unambiguous.
PR-URL: https://github.com/nodejs/node/pull/22402
Refs: a04f2f7df6/lib/fs.js (L549)
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Make space and comma distribution in some headings
consistent with the majority of headings.
PR-URL: https://github.com/nodejs/node/pull/22397
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Document how pipes can be chained in readable.pipe().
Document that zlib.Zlib inherits from stream.Transform.
PR-URL: https://github.com/nodejs/node/pull/22354
Fixes: https://github.com/nodejs/node/issues/22341
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
In short: `ServerResponse` acutally inherits from `OutgoingMessage`,
with a series of methods like those in `Stream.Writable`. So we cannot
use `implements`(this has made poeple feel puzzled because there are
still many methods we don't need or have), so `inherits from Stream` is
enough, due to some core reasons and performance told by mcollina from
the ref (See some latest discussions at Ref).
Ref: https://github.com/nodejs/node/issues/14146.
PR-URL: https://github.com/nodejs/node/pull/22305
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Notable changes:
* buffer:
* Fix out-of-bounds (OOB) write in `Buffer.write()` for UCS-2 encoding
(CVE-2018-12115)
* Fix unintentional exposure of uninitialized memory in `Buffer.alloc()`
(CVE-2018-7166)
* deps:
* Upgrade to OpenSSL 1.1.0i, fixing:
- Client DoS due to large DH parameter (CVE-2018-0732)
- ECDSA key extraction via local side-channel (CVE not assigned)
* Upgrade V8 from 6.7 to 6.8 (Michaël Zasso) #21079
- Memory reduction and performance improvements, details at:
https://v8project.blogspot.com/2018/06/v8-release-68.html
* http: `http.get()` and `http.request()` (and `https` variants) can now accept
three arguments to allow for a `URL` _and_ an `options` object
(Sam Ruby) #21616
* Added new collaborators
* Sam Ruby (https://github.com/rubys)
* George Adams (https://github.com/gdams)
v8 6.8 supports all removed flags. For example for BigInt.
PR-URL: https://github.com/nodejs/node/pull/22285
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Remove "consists of" in favor of "is". Use "fragment identifier" instead
of "fragment" and remove quotes.
PR-URL: https://github.com/nodejs/node/pull/22326
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Bryan English <bryan@bryanenglish.com>
It's an octothorp, but no one knows what that is either so let's just
show the character in the sentence and be done with it.
PR-URL: https://github.com/nodejs/node/pull/22326
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Bryan English <bryan@bryanenglish.com>
The "at sign" is properly the "commercial at" but let's just avoid the
whole naming issue by putting the symbol right in the sentence.
PR-URL: https://github.com/nodejs/node/pull/22324
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Bryan English <bryan@bryanenglish.com>
Simplify format explanation for urlObject.auth.
PR-URL: https://github.com/nodejs/node/pull/22324
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Bryan English <bryan@bryanenglish.com>
ICU has been on 6X for a while but example file name in Intl docs
still refers to it as 5X. It might be a small thing but I think
it's good to update this to avoid confusion.
PR-URL: https://github.com/nodejs/node/pull/22313
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: George Adams <george.adams@uk.ibm.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
readdir and readdirSync now have a "withFileTypes" option, which, when
enabled, provides an array of DirectoryEntry objects, similar to Stats
objects, which have the filename and the type information.
Refs: https://github.com/nodejs/node/issues/15699
PR-URL: https://github.com/nodejs/node/pull/22020
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: John-David Dalton <john.david.dalton@gmail.com>
`streamError` was removed quite some time ago but the docs and
code comments weren't updated. Fix that.
Fixes: https://github.com/nodejs/node/issues/20211
PR-URL: https://github.com/nodejs/node/pull/22246
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Implements mkdirp functionality in node_file.cc. The Benefit
of implementing in C++ layer is that the logic is more easily
shared between the Promise and callback implementation and
there are notable performance improvements.
This commit is part of the Tooling Group Initiative.
Refs: https://github.com/nodejs/user-feedback/pull/70
PR-URL: https://github.com/nodejs/node/pull/21875
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: Ron Korving <ron@ronkorving.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Sam Ruby <rubys@intertwingly.net>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/22220
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Bryan English <bryan@bryanenglish.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
The APIs were probably exposed by accident. getAuthTag and setAuthTag
are not a usual getter/setter pair: Getting the authentication tag
only makes sense in the context of encryption, setting it only makes
sense in the context of decryption. Currently, both functions throw.
Neither has been documented publicly.
PR-URL: https://github.com/nodejs/node/pull/22126
Reviewed-By: Ujjwal Sharma <usharma1998@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Allow the trace event log to include a count of unhandled rejections
and handled after rejections. This is useful primarily as a quick
check to see if rejections may be going unhandled (and unnoticed
in a process).
PR-URL: https://github.com/nodejs/node/pull/22124
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
dgram: Implement binding an existing `fd`. Allow pass a `fd` property
to `socket.bind()` in dgram.
src: Add `UDPWrap::Open`
PR-URL: https://github.com/nodejs/node/pull/21745
Fixes: https://github.com/nodejs/node/issues/14961
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/22087
Reviewed-By: Yihong Wang <yh.wang@ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Correct return type of `crypto.randomFillSync()` which is of same type as
passed as `buffer` argument.
Correct samples for `randomFill()` and `randomFillSync()` using a `TypeArray`
or `DataView` as these types don't support `.toString(encoding)`.
PR-URL: https://github.com/nodejs/node/pull/21550
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: James M Snell <jasnell@gmail.com>
1) Switched + / - and red / green in diffs. It seems like that style
is more natural to most people.
2) Short primitives do not use the diff anymore. Especially short
numbers can be read well like 1 !== 2. Cases that can not be
displayed like that (e.g., -0 and +0) use the regular diff output.
3) Improved error descriptions. It was not always clear what the
messages stood for. That should now be resolved.
4) Added a position indicator for single lines in case a tty is used
and the line is shorter than the visual columns.
5) Color detection is now done by checking stderr instead of stdout.
PR-URL: https://github.com/nodejs/node/pull/21628
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
[assert.js](https://github.com/nodejs/node/blob/master/lib/assert.js)
uses `stackStartFn` everywhere instead of `stackStartFunction`.
This also increases consistency with `stackStartFn`
in the `AssertionError` options.
PR-URL: https://github.com/nodejs/node/pull/22077
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
`CryptoStream` was removed via 9301b8a9c6.
PR-URL: https://github.com/nodejs/node/pull/22033
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
This is the first step in a long process of deprecating
`process.binding()` and replacing it with `internalBinding()`.
Eventually, once we have replaced internal uses of
`process.binding()` with `internalBinding()`, we can escalate
to a runtime deprecation and eventual end-of-life.
PR-URL: https://github.com/nodejs/node/pull/22004
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vladimir de Turckheim <vlad2t@hotmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Bryan English <bryan@bryanenglish.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
At the last TC39 meeting, a new type of Module Records backed by
JavaScript source called Dynamic Module Records was discussed, and
it is now at Stage 1. Regardless of whether that proposal makes it
all the way into the spec, SourceTextModule is indeed a more
descriptive and accurate name for what this class represents.
PR-URL: https://github.com/nodejs/node/pull/22007
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Jan Krems <jan.krems@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Yuta Hiroto <hello@hiroppy.me>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: John-David Dalton <john.david.dalton@gmail.com>
Reviewed-By: Bradley Farias <bradley.meck@gmail.com>
ERR_TRANSFERRING_EXTERNALIZED_SHAREDARRAYBUFFER was missing from the
docs - add it there based on the wording Anna used in the her PR.
PR-URL: https://github.com/nodejs/node/pull/21947
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Minwoo Jung <minwoo@nodesource.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Add a blurb to the documentation of `NAPI_MODULE_INIT()` pointing to
the discussion of the consequences of providing an addon that can be
loaded multiple times from multiple contexts.
PR-URL: https://github.com/nodejs/node/pull/21891
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/21908
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Lance Ball <lball@redhat.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
`require('worker_threads')` is not an instance of `EventEmitter`. So
`on` method would not be in it. The correct way to receive the message
would be to attach a listener to the `message` event on the
`parentPort`.
PR-URL: https://github.com/nodejs/node/pull/21486
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Make parameter names available in a human-readable way, for
more accessible/self-documenting usage of the `scrypt` functions.
This implements a review comment from the original PR that has
not been addressed.
Refs: https://github.com/nodejs/node/pull/20816#discussion_r189220776
PR-URL: https://github.com/nodejs/node/pull/21525
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Also document a common issue when casting a Buffer object to a
TypedArray object.
Fixes: https://github.com/nodejs/node/issues/19301
PR-URL: https://github.com/nodejs/node/pull/21718
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
The `options` parameter cannot be passed without `sandbox`.
PR-URL: https://github.com/nodejs/node/pull/21824
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
PR-URL: https://github.com/nodejs/node/pull/21782
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Replace some redirected URLs with the final ones.
PR-URL: https://github.com/nodejs/node/pull/21811
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
* set process.exitCode before calling 'exit' handlers so that there will
not be a situation where process.exitCode !== code in 'exit' callback
during uncaughtException handling
* don't ignore process.exitCode set in 'exit' callback when failed with
uncaughtException and there is no uncaughtException listener
PR-URL: https://github.com/nodejs/node/pull/21739
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
When request with both timeout and agent, timeout not
work. This patch will fix it, socket timeout will set
to request timeout before socket is connected, and
socket timeout will reset to agent timeout after
response end.
Fixes: https://github.com/nodejs/node/issues/21185
PR-URL: https://github.com/nodejs/node/pull/21204
Reviewed-By: Khaidi Chu <i@2333.moe>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ujjwal Sharma <usharma1998@gmail.com>
The `crypto.Credentials` legacy API has been Runtime deprecated since
v0.11.13 and users had been adviced to use `tls.SecureContext` instead.
PR-URL: https://github.com/nodejs/node/pull/21153
Fixes: https://github.com/nodejs/node/issues/20793
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Ujjwal Sharma <usharma1998@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/21712
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: Weijia Wang <starkwang@126.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Simple utility command line argument for setting the process
title on process startup.
PR-URL: https://github.com/nodejs/node/pull/21477
Reviewed-By: Bradley Farias <bradley.meck@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Updates the module.children description in the docs to match current
functionality in that it will only contain the modules required for the
first time by this module.
Fixes: https://github.com/nodejs/node/issues/9371
PR-URL: https://github.com/nodejs/node/pull/21672
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: James M Snell <jasnell@gmail.com>
The old error code `ERR_HTTP2_STREAM_CLOSED` was removed in commit
0babd181a0 (pull request #17406), and the
testcase for http2stream.pushStream was changed accordingly, but the
documentation change was overlooked.
This commit fixes it and aligns the documentation with the testcase.
This is a part of the fixes hinted by #21470, which includes some tests
for error codes usage and documentation and enforces a stricter format.
Refs: https://github.com/nodejs/node/pull/21470
Refs: https://github.com/nodejs/node/pull/17406
PR-URL: https://github.com/nodejs/node/pull/21487
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Notes:
1) Removed a number of root properties that did not seem relevant:
source, desc, and introduced_in. There no longer is a source, and
the other two are from the first include and do not reflect the
entire API.
2) As with https://github.com/nodejs/node/issues/20100, the current
"desc" properties sometimes contained in-page links, other times
referenced another page, and often did not match the links in the
original HTML or JSON file. I chose to standardize on external links
as "desc" values are isolated snippets as opposed to all.html which
can be viewed as a standalone and self contained document.
3) Eliminated preprocessing for @include entirely, including the test
case for this function.
4) _toc.md was renamed to index.md.
5) index comments no longer appear in embedded TOCs (left hand side
column in the generated documentation.
PR-URL: https://github.com/nodejs/node/pull/21637
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
1. Reorder some sections alphabetically.
2. Fix some heading levels.
3. Express a type of a property more formally.
PR-URL: https://github.com/nodejs/node/pull/21709
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Claudio Rodriguez <cjrodr@yahoo.com>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
We refer to them only as _error-first callbacks_ in our docs. We don't
call them _Node.js style callbacks_ so let's take this opporutnity to
keep things a bit more concise
PR-URL: https://github.com/nodejs/node/pull/21701
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Adds require('inspector').console, mapping it to the original
global.console of V8. This enables applications to send messages to
the inspector console programmatically.
Fixes: https://github.com/nodejs/node/issues/21651
PR-URL: https://github.com/nodejs/node/pull/21659
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Links in crypto.md table have been autolinking, but correct
Markdown processing will not autolink in block elements like tables.
Upcoming marked 0.4.0 will not autolink in this instance, so add the
links as anchor elements.
PR-URL: https://github.com/nodejs/node/pull/21678
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Remove "note that" from the fs documentation, along with other minor
nearby improvements.
Before:
Note that some characters are obscured by Strong Bad's head.
After:
Some characters are obscured by Strong Bad's head.
PR-URL: https://github.com/nodejs/node/pull/21646
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Merge the two duplicate entries for `napi_create_function()`.
Fixes: https://github.com/nodejs/node/issues/21606
PR-URL: https://github.com/nodejs/node/pull/21627/
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
* Move `napi_get_uv_event_loop` into the `NAPI_VERSION >= 2` section
* Move `napi_open_callback_scope`, `napi_close_callback_scope`,
`napi_fatal_exception`, `napi_add_env_cleanup_hook`, and
`napi_remove_env_cleanup_hook` into the `NAPI_VERSION >= 3` section
* Added a missing `added` property to `napi_get_uv_event_loop` in the
docs
* Added a `napiVersion` property to the docs and updated the parser and
generator to use it.
* Added usage documentation
PR-URL: https://github.com/nodejs/node/pull/19962
Reviewed-By: Gabriel Schulhof <gabriel.schulhof@intel.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Incoming set-cookie headers should be passed to user as array like in
http module.
Besides improving compatibility between http and http2 it avoids the
need to check if the type is an array or not in user code.
PR-URL: https://github.com/nodejs/node/pull/21360
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Introduces macros `NODE_MODULE_INITIALIZER` which expands to the name
of the special symbol that process.dlopen() will look for to initialize
an addon, and `NODE_MODULE_INIT()` which creates the boilerplate for
a context-aware module which can be loaded multiple times via the
special symbol mechanism.
Additionally, provides an example of using the new macro to construct
an addon which stores per-addon-instance data in a heap-allocated
structure that gets passed to each binding, rather than in a collection
of global static variables.
Re: https://github.com/nodejs/node/issues/21291#issuecomment-396729727
PR-URL: https://github.com/nodejs/node/pull/21318
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ujjwal Sharma <usharma1998@gmail.com>
This restores a broken and erroneously removed error, which was
accidentially renamed to ERR_MISSING_DYNAMIC_INTSTANTIATE_HOOK (notice
the "INTST" vs "INST") in 921fb84687
(PR #16874) and then had documentation and implementation removed under
the old name in 6e1c25c456 (PR #18857),
as it appeared unused.
This error code never worked or was documented under the mistyped name
ERR_MISSING_DYNAMIC_INTSTANTIATE_HOOK, so renaming it back to
ERR_MISSING_DYNAMIC_INSTANTIATE_HOOK is a semver-patch fix.
Refs: https://github.com/nodejs/node/issues/21440
Refs: https://github.com/nodejs/node/pull/21470
Refs: https://github.com/nodejs/node/pull/16874
Refs: https://github.com/nodejs/node/pull/18857
PR-URL: https://github.com/nodejs/node/pull/21493
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ron Korving <ron@ronkorving.nl>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Bundle a `uv_async_t`, a `uv_idle_t`, a `uv_mutex_t`, a `uv_cond_t`,
and a `v8::Persistent<v8::Function>` to make it possible to call into JS
from another thread. The API accepts a void data pointer and a callback
which will be invoked on the loop thread and which will receive the
`napi_value` representing the JavaScript function to call so as to
perform the call into JS. The callback is run inside a
`node::CallbackScope`.
A `std::queue<void*>` is used to store calls from the secondary
threads, and an idle loop is started by the `uv_async_t` callback on the
loop thread to drain the queue, calling into JS with each item.
Items can be added to the queue blockingly or non-blockingly.
The thread-safe function can be referenced or unreferenced, with the
same semantics as libuv handles.
Re: https://github.com/nodejs/help/issues/1035
Re: https://github.com/nodejs/node/issues/20964
Fixes: https://github.com/nodejs/node/issues/13512
PR-URL: https://github.com/nodejs/node/pull/17887
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
crypto.scrypt(), crypto.scryptSync(),
crypto.pbkdf2(), and crypto.pbkdf2Sync()
support also DataView like most other crypto APIs.
PR-URL: https://github.com/nodejs/node/pull/21549
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/21569
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Weijia Wang <starkwang@126.com>
setUncaughtExceptionCapture -> setUncaughtExceptionCaptureCallback
process.setUncaughtExceptionCaptureCallback and its docs were originally
added in https://github.com/nodejs/node/pull/17159
PR-URL: https://github.com/nodejs/node/pull/21523
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
“Never pass unsanitized user input to this function” is followed by a
code example with `bad_file`, but they aren’t related. Avoid confusion
by moving the example and giving `bad_file` a more specific name.
PR-URL: https://github.com/nodejs/node/pull/21516
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
This commit adds support for relative paths in Worker.
Paths are relative to the current working directory.
PR-URL: https://github.com/nodejs/node/pull/21407
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Guy Bedford <guybedford@gmail.com>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Added a note that that clarifies the fact that setServers() does not
check subsequent servers when the first one produces a NOTFOUND error.
PR-URL: https://github.com/nodejs/node/pull/21469
Refs: https://github.com/nodejs/node/issues/21391
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Add more details regarding processing and data type of incoming
headers in Http2.
PR-URL: https://github.com/nodejs/node/pull/21296
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ujjwal Sharma <usharma1998@gmail.com>
Using util.inspect should still return values in case the maximum
call stack size is reached. This is important to inspect linked
lists and similar.
PR-URL: https://github.com/nodejs/node/pull/20725
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Ali Ijaz Sheikh <ofrobots@google.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Refactor Timers to behave more similarly to Immediates by having
a single uv_timer_t handle which is stored on the Environment.
No longer expose timers in a public binding and instead make
it part of the internalBinding.
PR-URL: https://github.com/nodejs/node/pull/20894
Fixes: https://github.com/nodejs/node/issues/10154
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
`dns.resolveAny()`, `dnsPromises.resolveAny()`,
`dns.setServers()`, `dnsPromises.setServers()`
were out of ABC order in some places.
PR-URL: https://github.com/nodejs/node/pull/21505
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
ERR_HTTP2_ERROR and ERR_UNKNOWN_BUILTIN_MODULE error codes documentation
seem to have been accidentally removed in commit
1cdb41f287 (pull request #15160).
This reverts that removal, restoring the documentation for those two
error codes.
Those error codes are used from lib/ folder.
This is a part of the fixes hinted by #21470, which includes some tests
for error codes usage and documentation and enforces a stricter format.
PR-URL: https://github.com/nodejs/node/pull/21484
Refs: https://github.com/nodejs/node/pull/21470
Refs: https://github.com/nodejs/node/issues/21440
Refs: https://github.com/nodejs/node/pull/15160
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
A single exception is that ERR_HTTP2_* comes after ERR_HTTP_*.
Actual content not changed, just some blocks are moved around.
This is a part of the fixes hinted by #21470, which includes some tests
for error codes usage and documentation and enforces a stricter format.
PR-URL: https://github.com/nodejs/node/pull/21485
Refs: https://github.com/nodejs/node/pull/21470
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Only one error code was missing an appropriate anchor, and it was
ERR_SCRIPT_EXECUTION_TIMEOUT. This commit adds that missing anchor.
This is a part of the fixes hinted by #21470, which includes some tests
for error codes usage and documentation and enforces a stricter format.
PR-URL: https://github.com/nodejs/node/pull/21483
Refs: https://github.com/nodejs/node/pull/21470
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
calling writeHead() into a Response object that has no headers already
set causes getHeader() to return undefined, even if the header was set
in the writeHead() function call. Explain this behavior as an
optimiation as opposed to a bug.
Fixes: https://github.com/nodejs/node/issues/10354
PR-URL: https://github.com/nodejs/node/pull/21289
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
If an application has a large RSS (GB), jorangreef
observed that child_process.spawn will block the
event loop for ms-s.
This is surprising behavior and merits documentation.
Refs: https://github.com/nodejs/node/issues/14917
PR-URL: https://github.com/nodejs/node/pull/21234
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/21430
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Because reasons.
PR-URL: https://github.com/nodejs/node/pull/21264
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/21264
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
The STYLE_GUIDE indicates that personal pronouns like "you" should be
avoided in reference documentation. Remove "you" from N-API doc.
PR-URL: https://github.com/nodejs/node/pull/21382
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
PR-URL: https://github.com/nodejs/node/pull/21311
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
The Buffer doc has a helpful "Class Method" label before static methods
on the Buffer class. The only other class in the docs that I can find
with static methods is ECDH in crypto. Add the label to the one static
method on the ECDH class.
PR-URL: https://github.com/nodejs/node/pull/21357
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
This change places the links to Writable stream and Readble stream
in the order these sections appear when scrolling down the screen.
PR-URL: https://github.com/nodejs/node/pull/21333
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
While `perf_hooks` is still in experimental, remove less useful
bootstrap milestones.
PR-URL: https://github.com/nodejs/node/pull/21247
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/21229
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Use the scrypt() infrastructure to reimplement pbkdf2() in a simpler
manner.
PR-URL: https://github.com/nodejs/node/pull/20816
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Scrypt is a password-based key derivation function that is designed to
be expensive both computationally and memory-wise in order to make
brute-force attacks unrewarding.
OpenSSL has had support for the scrypt algorithm since v1.1.0. Add a
Node.js API modeled after `crypto.pbkdf2()` and `crypto.pbkdf2Sync()`.
Changes:
* Introduce helpers for copying buffers, collecting openssl errors, etc.
* Add new infrastructure for offloading crypto to a worker thread.
* Add a `AsyncWrap` JS class to simplify pbkdf2(), randomBytes() and
scrypt().
Fixes: https://github.com/nodejs/node/issues/8417
PR-URL: https://github.com/nodejs/node/pull/20816
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
This was previously incorrect.
PR-URL: https://github.com/nodejs/node/pull/21180
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Minwoo Jung <minwoo@nodesource.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Extend return type of `read()` method with `any` which is a
valid return type for readable streams in object mode.
PR-URL: https://github.com/nodejs/node/pull/21178
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Right now when not adding a callback to the pipeline it could cause
an uncaught exception if there is an error. Instead, just make the
callback mandatory as mostly done in all other Node.js callback APIs
so users explicitly have to decide what to do in such situations.
PR-URL: https://github.com/nodejs/node/pull/21054
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/21067
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Remove spaces around slash characters in documentation. This change
sometimes rewords the content where the slash construction may not be
what is called for.
PR-URL: https://github.com/nodejs/node/pull/21140
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Alphabetize the lists of options for tls.createServer() and
tls.createSecureContext().
PR-URL: https://github.com/nodejs/node/pull/21139
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Change instances of `foo has been deprecated` to `foo is deprecated` and
similar.
PR-URL: https://github.com/nodejs/node/pull/21136
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Provide `stdin`, `stdout` and `stderr` options for the `Worker`
constructor, and make these available to the worker thread
under their usual names.
The default for `stdin` is an empty stream, the default for
`stdout` and `stderr` is redirecting to the parent thread’s
corresponding stdio streams.
PR-URL: https://github.com/nodejs/node/pull/20876
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Shingo Inoue <leko.noor@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: John-David Dalton <john.david.dalton@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
Implement multi-threading support for most of the API.
Thanks to Stephen Belanger for reviewing this change in its
original form, to Olivia Hugger for reviewing the
documentation and some of the tests coming along with it,
and to Alexey Orlenko and Timothy Gu for reviewing other
parts of the tests.
Refs: https://github.com/ayojs/ayo/pull/110
Refs: https://github.com/ayojs/ayo/pull/114
Refs: https://github.com/ayojs/ayo/pull/117
PR-URL: https://github.com/nodejs/node/pull/20876
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Shingo Inoue <leko.noor@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: John-David Dalton <john.david.dalton@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
Logic is added to the `MessagePort` mechanism that
attaches hidden objects to those instances when they are transferred
that track their lifetime and maintain a reference count, to make
sure that memory is freed at the appropriate times.
Thanks to Stephen Belanger for reviewing this change in its original PR.
Refs: https://github.com/ayojs/ayo/pull/106
PR-URL: https://github.com/nodejs/node/pull/20876
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Shingo Inoue <leko.noor@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: John-David Dalton <john.david.dalton@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
Support passing `MessagePort` instances through other `MessagePort`s,
as expected by the `MessagePort` spec.
Thanks to Stephen Belanger for reviewing this change in its original PR.
Refs: https://github.com/ayojs/ayo/pull/106
PR-URL: https://github.com/nodejs/node/pull/20876
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Shingo Inoue <leko.noor@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: John-David Dalton <john.david.dalton@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
Implement `MessagePort` and `MessageChannel` along the lines of
the DOM classes of the same names. `MessagePort`s initially
support transferring only `ArrayBuffer`s.
Thanks to Stephen Belanger for reviewing this change in its
original form, to Benjamin Gruenbaum for reviewing the
added tests in their original form, and to Olivia Hugger
for reviewing the documentation in its original form.
Refs: https://github.com/ayojs/ayo/pull/98
PR-URL: https://github.com/nodejs/node/pull/20876
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Shingo Inoue <leko.noor@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: John-David Dalton <john.david.dalton@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
Before this commit, when the user calls methods on a closed or
errored fs event watcher, they could hit a crash since the
FSEventWrap in C++ land may have already been destroyed with
the internal pointer set to nullptr. This commit makes sure
that the user cannot hit crashes like that, instead the
methods calling on a closed watcher will be noops.
Also explicitly documents that the watchers should not be used
in `close` and `error` event handlers.
PR-URL: https://github.com/nodejs/node/pull/20985
Fixes: https://github.com/nodejs/node/issues/20738
Fixes: https://github.com/nodejs/node/issues/20297
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Ron Korving <ron@ronkorving.nl>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
`eg.` was used in two places where `e.g.` was intended. Replace one
instance with `e.g.` and rewrite the other instance to not require the
abbreviation at all.
PR-URL: https://github.com/nodejs/node/pull/21045
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Weijia Wang <starkwang@126.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Yuta Hiroto <hello@hiroppy.me>
In deprecations.md, there are many uses of "has been" that are mildly
awkward. This changes several instances of things like "fhqwhgads() has
been deprecated" to "fhqwhgads() is deprecated".
Especially for non-native speakers, present tense is generally easier to
read and understand than past participles. (Or at least that's my
experience reading things in languages other than English.)
PR-URL: https://github.com/nodejs/node/pull/21043
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This commit allows permission bits higher than 0o777 to go through
the API (e.g. `S_ISVTX`=`0o1000`, `S_ISGID`=`0o2000`,
`S_ISUID`=`0o4000`).
Also documents that these bits are not exposed through `fs.constants`
and their behaviors are platform-specific, so the users need to
use them on their own risk.
PR-URL: https://github.com/nodejs/node/pull/20975
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: James M Snell <jasnell@gmail.com>
Update reference to read `hostname` instead of `host` for consistency.
Also update function signature to use `hostname` rather than `host`
PR-URL: https://github.com/nodejs/node/pull/20933
Refs: https://github.com/nodejs/node/issues/20892
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
