PR-URL: https://github.com/nodejs/node/pull/17937
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/17923
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
PR-URL: https://github.com/nodejs/node/pull/17877
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Documenting the best way to imitate the old behavior saves time for people
migrating from older versions. (E.g. for unexpected ECONNRESET)
It isn't immediately obvious if earlier nodejs versions behaved the same
way as nodejs 8 does with keepAliveTimeout = 0.
From 0aa7ef5950, it seems like they behave
the same way.
Related to issues such as #13391 that show up when migrating to node 8
PR-URL: https://github.com/nodejs/node/pull/17660
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
`module is maintained by a third-party module` seems confusing. Changed
to `module is maintained by a third-party`.
PR-URL: https://github.com/nodejs/node/pull/17865
Reviewed-By: Weijia Wang <starkwang@126.com>
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reviewed-By: Minwoo Jung <minwoo@nodesource.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: James M Snell <jasnell@gmail.com>
The `rawPacket` is the current buffer that just parsed. Adding this
buffer to the error object of `clientError` event is to make it possible
that developers can log the broken packet.
PR-URL: https://github.com/nodejs/node/pull/17672
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
There two similar error codes in lib: "ERR_VALUE_OUT_OF_RANGE"
and "ERR_OUT_OF_RANGE". This change is to reduce them into
"ERR_VALUE_OUT_OF_RANGE"
Fixes: https://github.com/nodejs/node/issues/17603
PR-URL: https://github.com/nodejs/node/pull/17648
Fixes: https://github.com/nodejs/node/issues/17603
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
The deprecated module was removed via
84a23391f6.
PR-URL: https://github.com/nodejs/node/pull/17815
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Throw ERR_SOCKET_CLOSED and ERR_SERVER_NOT_RUNNING
instead of the old-style errors in net.js.
PR-URL: https://github.com/nodejs/node/pull/17766
Refs: https://github.com/nodejs/node/issues/17709
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This migrates the old style error in _tls_wrap.js to
the new style error ERR_TLS_RENEGOTIATION_DISABLED.
Refs: https://github.com/nodejs/node/issues/17709
PR-URL: https://github.com/nodejs/node/pull/17792
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
The `auxData` field is not exposed to JavaScript, as DevTools uses it
for its `isDefault` parameter, which is implemented faithfully,
contributing to the nice indentation in the context selection panel.
Without the indentation, when `Target` domain gets implemented (along
with a single Inspector for cluster) in #16627, subprocesses and VM
contexts will be mixed up, causing confusion.
PR-URL: https://github.com/nodejs/node/pull/17720
Refs: https://github.com/nodejs/node/pull/14231#issuecomment-315924067
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/17712
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: James M Snell <jasnell@gmail.com>
Because of the potential performance bottlenecks that may be introduced
by `util.inspect()` and `util.format()` in production hot path code.
Based on real user feedback, it is not obvious that these are intended
to be debugging tools.
PR-URL: https://github.com/nodejs/node/pull/17791
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
This improves the api descriptions for fs.chown, fs.chmod, and fs.mkdir
along with their *Sync counterparts.
PR-URL: https://github.com/nodejs/node/pull/17679
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: James M Snell <jasnell@gmail.com>
Using a custom inspect function on the inspected object is
deprecated. Remove the reference from the option description
to make sure the user will read about the deprecation in the
more detailed description.
PR-URL: https://github.com/nodejs/node/pull/17576
Reviewed-By: Anna Henningsen <anna@addaleax.net>
The current default formatting is not ideal and this improves
the situation by formatting the output more intuitiv.
1) All object keys are now indented by 2 characters instead of
sometimes 2 and sometimes 3 characters.
2) Each object key will now use an individual line instead of
sharing a line potentially with multiple object keys.
3) Long strings will now be split into multiple lines in case
they exceed the "lineBreak" option length (including the
current indentation).
4) Opening braces are now directly behind a object property
instead of using a new line.
5) Switch inspect "base" order. In case the compact option is set
to `false`, inspect will now print
"[Function: foo] {\n property: 'data'\n}"
instead of
"{ [Function: foo]\n property: 'data'\n}".
PR-URL: https://github.com/nodejs/node/pull/17576
Reviewed-By: Anna Henningsen <anna@addaleax.net>
From now on it is possible to use a validation object in throws
instead of the other possibilites.
PR-URL: https://github.com/nodejs/node/pull/17584
Refs: https://github.com/nodejs/node/pull/17557
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Ron Korving <ron@ronkorving.nl>
Reviewed-By: Yuta Hiroto <hello@about-hiroppy.com>
This should not be important anymore in newer docs. The change is
also documented in the "changed" part of the function.
PR-URL: https://github.com/nodejs/node/pull/17707
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
It was not clear why the error name is actually also tested for when
using a regular expression. This is now clarified.
PR-URL: https://github.com/nodejs/node/pull/17585
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Evan Lucas <evanlucas@me.com>
Throw a TypeError in case a error message is provided in the second
argument and a third argument is present as well.
This is clearly a mistake and should not be done.
PR-URL: https://github.com/nodejs/node/pull/17585
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Evan Lucas <evanlucas@me.com>
PR-URL: https://github.com/nodejs/node/pull/17727
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: James M Snell <jasnell@gmail.com>
Causing the linter job to fail on CI right now.
PR-URL: https://github.com/nodejs/node/pull/17741
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/17692
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/17406
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
This is a significant cleanup and refactoring of the
cleanup/close/destroy logic for Http2Stream and Http2Session.
There are significant changes here in the timing and ordering
of cleanup logic, JS apis. and various related necessary edits.
Also works on directories.
PR-URL: https://github.com/nodejs/node/pull/17702
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
As part of the readableState/writableState mega issue #445, this
removes all of the references to .length on those properties and
replaces them with a readableLength and writableLength getter.
See: https://github.com/nodejs/node/issues/445
PR-URL: https://github.com/nodejs/node/pull/12857
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Change type annotations for eventName in events API doc
from {any} to {string|symbol}.
PR-URL: https://github.com/nodejs/node/pull/17666
Fixes: https://github.com/nodejs/node/issues/17657
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
This adds computed properties to readable and writable streams to
allow access to the readable buffer, the writable buffer, and flow
state without accessing the readable or writable state.
These are the only uses of readable and writable state in the docs
so adding these work arounds allows them to be removed from the docs.
This also updates net, http_client and http_server to use the new
methods instead of manipulating readable and writable state directly.
See: https://github.com/nodejs/node/issues/445
PR-URL: https://github.com/nodejs/node/pull/12855
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: James M Snell <jasnell@gmail.com>
Percent-encoded additional characters in fragment state with new
FRAGMENT_ENCODE_SET lookup table. The fragment percent-encode set
includes the C0 control percent-encode set and code points U+0020,
U+0022, U+003C, U+003E, and U+0060.
PR-URL: https://github.com/nodejs/node/pull/17627
Fixes: https://github.com/nodejs/node/issues/17540
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reviewed-By: Daijiro Wachi <daijiro.wachi@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: James M Snell <jasnell@gmail.com>
Refactor lib & src code to eliminate all deep reaches into the
internal _events dictionary object, instead use available APIs
and add an extra method to EventEmitter: rawListeners.
PR-URL: https://github.com/nodejs/node/pull/17440
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
According to the linked document: "The length of the randomly-generated
portion of the salt shall be at least 128 bits." [NIST SP 800-132]
PR-URL: https://github.com/nodejs/node/pull/17524
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
The PR number included for this api addition was originally incorrect.
PR-URL: https://github.com/nodejs/node/pull/17630
Refs: https://github.com/nodejs/node/pull/14903
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Currently the documentation states that promisify() will result in
undefined behavior if bad arguments are passed. This is not
necessarily the case, since the behavior is well defined, but just
not useful.
PR-URL: https://github.com/nodejs/node/pull/17593
Fixes: https://github.com/nodejs/node/issues/17569
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Document and test the existing support for generic Duplex streams
in the TLS module.
PR-URL: https://github.com/nodejs/node/pull/17599
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
The square module is described as exporting a constructor,
which would mean it would need to be invoked with the
new keyword in bar.js after requiring it. Otherwise it's
technically a factory function, not a constructor.
PR-URL: https://github.com/nodejs/node/pull/17364
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Our Addons documentation has a "Hello world" example that
outlines all steps to build it. Adding the sources for this
"Hello world" example for N-API.
PR-URL: https://github.com/nodejs/node/pull/17425
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Rewrite and edit somewhat confusing paragraph about inodes and AIX in
fs.md.
PR-URL: https://github.com/nodejs/node/pull/17519
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Make text for Console constructor more precise.
PR-URL: https://github.com/nodejs/node/pull/17519
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/17502
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: Minwoo Jung <minwoo@nodesource.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Our docs use both "one time listener" and "one-time listener". The
second is more correct. Standardize on that.
PR-URL: https://github.com/nodejs/node/pull/17502
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: Minwoo Jung <minwoo@nodesource.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/17502
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: Minwoo Jung <minwoo@nodesource.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
IPC messages are more complicated than a simple pipe passing JSON
objects separated by new line. This removes inaccurate notes about
implementation from the documentation.
PR-URL: https://github.com/nodejs/node/pull/17460
Fixes: https://github.com/nodejs/node/issues/16491
Fixes: https://github.com/nodejs/node/issues/17405
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
If fill() attempts to write a string to a buffer, but fails
silently, then uninitialized memory could be leaked. This commit
causes fill() to throw if the string write operation fails.
Refs: https://github.com/nodejs/node/issues/17423
PR-URL: https://github.com/nodejs/node/pull/17427
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
PR-URL: https://github.com/nodejs/node/pull/17459
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
The module introduction includes some uninformative text and some
repetitive text. Edit for clarity and brevity.
PR-URL: https://github.com/nodejs/node/pull/17463
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
"On <operating system>" is used everywhere in this file except for one
use of "In <operating system>". Standardize to "On".
PR-URL: https://github.com/nodejs/node/pull/17463
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
PR-URL: https://github.com/nodejs/node/pull/17463
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
PR-URL: https://github.com/nodejs/node/pull/17463
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Update return type of `Init` function in documentation to match
`napi_addon_register_func` signature. Return type used to be
`void`, now it is `napi_value`.
PR-URL: https://github.com/nodejs/node/pull/17424
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Zero-fill when `Buffer.alloc()` receives invalid fill data.
A solution like https://github.com/nodejs/node/pull/17427 which switches
to throwing makes sense, but is likely a breaking change.
This suggestion leaves the behaviour of `buffer.fill()` untouched,
since any change to it would be a breaking change, and lets
`Buffer.alloc()` check whether any filling took place or not.
PR-URL: https://github.com/nodejs/node/pull/17428
Refs: https://github.com/nodejs/node/pull/17427
Refs: https://github.com/nodejs/node/issues/17423
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Ali Ijaz Sheikh <ofrobots@google.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
This method was previously exposed by V8 (since node 8.0.0) but not
implemented in node.
PR-URL: https://github.com/nodejs/node/pull/17152
Refs: https://github.com/nodejs/node/issues/17128
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
changes in c++ are in the computeSecret function, but the thrown
exception that was moved to JS land was in BufferToPoint
function, here i let the allocation error be thrown so the only value
returned is the nullptr that i use later to catch the error in
computeSecret, to then construct the exception in JS land.
an ERR_CRYPTO_ECDH_INVALID_PUBLIC_KEY error was added to errors.js
and with that, subsequent changes to docs and tests were made.
PR-URL: https://github.com/nodejs/node/pull/16849
Refs: https://www.iacr.org/archive/pkc2003/25670211/25670211.pdf
Fixes: https://github.com/nodejs/node/issues/16625
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
uses @@toStringTag when creating the "tag" for an inspected value
PR-URL: https://github.com/nodejs/node/pull/16956
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
The funciton was added in eb2ca10462
PR-URL: https://github.com/nodejs/node/pull/17203
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
PR-URL: https://github.com/nodejs/node/pull/17203
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Introduce `process.shouldAbortOnUncaughtException` to control
`--abort-on-uncaught-exception` behaviour, and implement
some of the domains functionality on top of it.
PR-URL: https://github.com/nodejs/node/pull/17159
Refs: https://github.com/nodejs/node/issues/17143
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Andreas Madsen <amwebdk@gmail.com>
Requireing the strict version will allow to use `assert.equal`,
`assert.deepEqual` and there negated counterparts to be used with
strict comparison instead of using e.g. `assert.strictEqual`.
The API is identical to the regular assert export and only differs
in the way that all functions use strict compairson.
PR-URL: https://github.com/nodejs/node/pull/17002
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
1) Separate all loose and strict functions.
2) Stronger outline the used comparison rules in (not)deepStrictEqual
3) Fix SameValue comparison info
PR-URL: https://github.com/nodejs/node/pull/17002
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Adds `TCPSERVERWRAP` and `PIPESERVERWRAP` as provider types. This
makes it possible to distinguish servers from connections.
PR-URL: https://github.com/nodejs/node/pull/17157
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Neither crypto.randomBytes nor crypto.randomFill
partitions the work submitted to the threadpool.
This change was suggested during the discussion of #17054.
See also #17154.
PR-URL: https://github.com/nodejs/node/pull/17250
Refs: https://github.com/nodejs/node/pull/17154
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
PR-URL: https://github.com/nodejs/node/pull/17350
Reviewed-By: Yosuke Furukawa <yosuke.furukawa@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Provides list of all builtin modules in Node.
Includes modules of all types:
- prefixed (ex: _tls_common)
- deprecated (ex: sys)
- regular (ex: vm)
PR-URL: https://github.com/nodejs/node/pull/16386
Refs: https://github.com/nodejs/node/issues/3307
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
The V8 API it is based on is deprecated and scheduled for removal later
this year. Remove it.
PR-URL: https://github.com/nodejs/node/pull/13295
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Franziska Hinkelmann <franziska.hinkelmann@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Robert Jefe Lindstaedt <robert.lindstaedt@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/17263
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Add `"dynamic"` to the list of supported `format`s returned by a
custom resolve hook.
Add a table describing the meaning of each `format`.
PR-URL: https://github.com/nodejs/node/pull/16375
Refs: https://github.com/nodejs/node/pull/15445
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Yuta Hiroto <hello@about-hiroppy.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
This change was suggested during the discussion of #17054.
PR-URL: https://github.com/nodejs/node/pull/17154
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
This aligns assert.strictEqual and assert.notStrictEqual with
assert.deepStrictEqual to use the Object.is() comparison instead
of strict equality.
PR-URL: https://github.com/nodejs/node/pull/17003
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This update does several significant things:
1. It eliminates the base Nghttp2* classes and folds those
in to node::http2::Http2Session and node::http2::Http2Stream
2. It makes node::http2::Http2Stream a StreamBase instance and
sends that out to JS-land to act as the [kHandle] for the
JavaScript Http2Stream class.
3. It shifts some of the callbacks from C++ off of the JavaScript
Http2Session class to the Http2Stream class.
4. It refactors the data provider structure for FD and Stream
based sending to help encapsulate those functions easier
5. It streamlines some of the functions at the C++ layer to
eliminate now unnecessary redirections
6. It cleans up node_http2.cc for better readability and
maintainability
7. It refactors some of the debug output
8. Because Http2Stream instances are now StreamBases, they are
now also trackable using async-hooks
9. The Stream::OnRead algorithm has been simplified with a
couple bugs fixed.
10. I've eliminated node_http2_core.h and node_http2_core-inl.h
11. Detect invalid handshake a report protocol error to session
12. Refactor out of memory error, improve other errors
13. Add Http2Session.prototype.ping
PR-URL: https://github.com/nodejs/node/pull/17105
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Sebastiaan Deckers <sebdeckers83@gmail.com>
Add a utility functions for addons to use when they need
a reference to the current event loop.
While the libuv API is not directly part of N-API, it
provides a quite stable C API as well, and is tightly
integrated with Node itself.
As a particular use case, without access to the event loop
it is hard to do something interesting from inside a N-API
finalizer function, since calls into JS and therefore virtually
all other N-API functions are not allowed.
PR-URL: https://github.com/nodejs/node/pull/17109
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Add missing "introduced_in" comments for alternative version links.
PR-URL: https://github.com/nodejs/node/pull/16741
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Google's V8 engine is styled "V8" and not "v8". Most Node.js docs style
it correctly. This change fixes a few instances that are not styled
correctly.
PR-URL: https://github.com/nodejs/node/pull/17089
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Although the primary use-case for the cluster module is networking, the
module provides a generic master/worker interface that could also be
used if you dont use networking at all. Currently the docs are a bit
ambiguous about this as only the primary use-case is ever mentioned,
this remark should clarify that the cluster module can also be used
without disadvantages if you dont use networking.
PR-URL: https://github.com/nodejs/node/pull/17031
Refs: https://github.com/nodejs/help/issues/970
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Adds the console.debug() method, alias for console.log(). This method is
exposed by V8 and was only available in inspector until now. Also adds
matching test and documentation.
PR-URL: https://github.com/nodejs/node/pull/17033
Refs: https://github.com/nodejs/node/pull/17004
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Khaidi Chu <i@2333.moe>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Remove the practice of starting most error descriptions with "Used when"
or wordier variations.
Change errors of the form:
> Used when the type of an asynchronous resource is invalid.
...to:
> The type of an asynchronous resource was invalid.
Change errors of the form:
> The `'ERR_INVALID_CURSOR_POS'` is thrown specifically when a cursor on
> a given stream is attempted to move to a specified row without a
> specified column.
...to:
> A cursor on a given stream cannot be moved to a specified row without
> a specified column.
PR-URL: https://github.com/nodejs/node/pull/16954
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Change documentation-only deprecation for custom inspection using
`object.inspect` property to a runtime deprecation.
This is a breaking change. Custom inspection via `object.inspect` is
deprecated because there is a more robust Symbol-based alternative to
`.inspect` and the custom inspection via `object.inspect` feature means
that people can accidentally break `console.log()` simply by attaching a
`.inspect` property to their objects. Note that since this is a
deprecation, the custom inspection will still work. The breaking change
is simply the printing of a warning which could alarm users, break tests
or other things that might be dependent on specific output, etc.
PR-URL: https://github.com/nodejs/node/pull/16393
Ref: https://github.com/nodejs/node/issues/15549
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
If another function has already emitted the deprecation warning with the
same code as the warning that is about to be emitted, do not emit the
warning.
This is a breaking change. Previously, different functions could emit
the same deprecation warning multiple times. This was a known bug rather
than a feature, but this change is being treated as a breaking change
out of caution. Identical deprecation warnings should not be emitted.
PR-URL: https://github.com/nodejs/node/pull/16393
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Improve documentation for `util.deprecate()`. In particular, provide
complete function signature, document arguments, and document return
value.
PR-URL: https://github.com/nodejs/node/pull/16393
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
In cases where libraries create AsyncResources which may be emitting
more events depending on usage, the only way to ensure that destroy is
called properly is by calling it when the resource gets garbage
collected.
Fixes: https://github.com/nodejs/node/issues/16153
PR-URL: https://github.com/nodejs/node/pull/16998
Fixes: https://github.com/nodejs/node/issues/16153
Reviewed-By: Andreas Madsen <amwebdk@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Mea culpa, somehow I managed to drop the documentation commit while
merging the pull request. This should have been included in commit
74023c072c ("fs: expose realpath(3) bindings") from this month.
PR-URL: https://github.com/nodejs/node/pull/17059
Refs: https://github.com/nodejs/node/pull/15776
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
This will allow trace event to record timing information for all
asynchronous operations that are observed by async_hooks.
PR-URL: https://github.com/nodejs/node/pull/15538
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Replaced _readableState.highWaterMark with a .readableHighWaterMark
getter and _writableState.highWaterMark with a .writableHighWaterMark
getter.
The getters are non-enumerable because they break some prototype
manipulation that happen in the ecosystem.
Ref: https://github.com/nodejs/node/issues/445.
PR-URL: https://github.com/nodejs/node/pull/12860
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Add an option 'clientCertEngine' to `tls.createSecureContext()` which gets
wired up to OpenSSL function `SSL_CTX_set_client_cert_engine`. The option
is passed through from `https.request()` as well. This allows using a custom
OpenSSL engine to provide the client certificate.
This doesn't work in OpenSSL 1.1.0. Per discussion on the PR, it is
preferable to just deprecate this setting. Deprecate it and skip the
test in OpenSSL 1.1.0.
PR-URL: https://github.com/nodejs/node/pull/16130
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Rod Vagg <rod@vagg.org>
This aligns the documentation with reality. This API never did what Node
claims it did.
The SSL_CIPHER_get_version function just isn't useful. In OpenSSL 1.0.2,
it always returned the string "TLSv1/SSLv3" for anything but SSLv2
ciphers, which Node does not support. Note how test-tls-multi-pfx.js
claims that ECDHE-ECDSA-AES256-GCM-SHA384 was added in TLSv1/SSLv3 which
is not true. That cipher is new as of TLS 1.2. The OpenSSL 1.0.2
implementation is:
char *SSL_CIPHER_get_version(const SSL_CIPHER *c)
{
int i;
if (c == NULL)
return ("(NONE)");
i = (int)(c->id >> 24L);
if (i == 3)
return ("TLSv1/SSLv3");
else if (i == 2)
return ("SSLv2");
else
return ("unknown");
}
In OpenSSL 1.1.0, SSL_CIPHER_get_version changed to actually behave as
Node documented it, but this changes the semantics of the function and
breaks tests. The cipher's minimum protocol version is not a useful
notion to return to the caller here, so just hardcode the string at
"TLSv1/SSLv3" and document it as legacy.
PR-URL: https://github.com/nodejs/node/pull/16130
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Rod Vagg <rod@vagg.org>
Add an intro section and example for the vm module.
PR-URL: https://github.com/nodejs/node/pull/16867
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/16866
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Bryan English <bryan@bryanenglish.com>
This commit changes the wording of subprocess.killed to reflect
that a child process was successfully signaled, and not
necessarily terminated.
Fixes: https://github.com/nodejs/node/issues/16747
PR-URL: https://github.com/nodejs/node/pull/16748
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/16828
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Rest of the document uses `stream.Readable` or `stream.Writable`. This
patch makes the usage consistent in the parameter description.
PR-URL: https://github.com/nodejs/node/pull/16786
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/16718
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
* eliminate pooling of Nghttp2Stream instances. After testing,
the pooling is not having any tangible benefit
and makes things more complicated. Simplify. Simplify.
* refactor inbound headers
* Enforce MAX_HEADERS_LIST setting and limit the number of header
pairs accepted from the peer. Use the ENHANCE_YOUR_CALM error
code when receiving either too many headers or too many octets.
Use a vector to store the headers instead of a queue
PR-URL: https://github.com/nodejs/node/pull/16676
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
PR-URL: https://github.com/nodejs/node/pull/16579
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
I decided that it would make a lot of sense for me to set
`NODE_OPTIONS=--stack-trace-limit=100` on my development machine.
This code allows me to do that. :)
PR-URL: https://github.com/nodejs/node/pull/16495
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ryan Graham <r.m.graham@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Preparing for the migration of existing UVException and ErrnoExceptions
from the native layer, add new `errors.SystemError` to internal/errors
and new `env->CollectExceptionInfo()` / `env->CollectUVExceptionInfo()`
methods.
PR-URL: https://github.com/nodejs/node/pull/16567
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
This makes the process.release.lts property configurable by a constant.
This ref is the original PR to v6.x.
Refs: https://github.com/nodejs/node/pull/3212
Conflicts:
doc/api/process.md
PR-URL: https://github.com/nodejs/node/pull/16656
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Included reference to 'constant time' in
crypto.timingSafeEqual description.
The Node website would score higher on a Google search
and the API would be more discoverable if it used the words
"constant time" in its description.
PR-URL: https://github.com/nodejs/node/pull/16604
Fixes: https://github.com/nodejs/node/issues/16504
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
1. `process.memoryUsage()` returns an object with 4 keys: `rss,
heapTotal, headUsed, external`. There were brief explanations for
the rest except `rss`. This commit adds this on the docs.
2. A little more clarity on `rss` to help people disambiguate it from
the virtual memory size.
PR-URL: https://github.com/nodejs/node/pull/16566
Refs: https://github.com/nodejs/node/pull/16566#discussion_r147545405
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
doc: Add windowsVerbatimArguments docs for
child_process spawn, spawnSync, execFile, and fork
PR-URL: https://github.com/nodejs/node/pull/16299
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Move the throw out of c++ and into js using internal/errors
PR-URL: https://github.com/nodejs/node/pull/16546
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
* Older experimental APIs have been removed.
[[`d731369b1d`](https://github.com/nodejs/node/commit/d731369b1d)]
[#14414](https://github.com/nodejs/node/pull/14414)
* **Errors**
* Improvements have been made to `buffer` module error messages.
* The assignment of static error codes to Node.js error continues:
* `buffer`
* `child_process`
* `console`
* `crypto`
* `dns`
* `events`
* `fs`
* `http`
* `inspector`
* `net`
* `path`
* `process`
* `querystring`
* `readline`
* `repl`
* `streams`
* `string_decoder`
* `timers`
* `tls`
* `url`
* `util`
* `v8`
* `zlib`
* **Child Processes**
* Errors are emitted on process nextTick.
* **Domains**
* The long-deprecated `.dispose()` method has been removed.
* **fs**
* The `fs.ReadStream` and `fs.WriteStream` classes now use `destroy()`.
* `fs` module callbacks are now invoked with an undefined context.
* **HTTP/1**
* A 400 Bad Request response will now be sent when parsing fails.
* Socket timeout will be set when the socket connects.
* A bug causing the request `'error'` event to fire twice was fixed.
* HTTP clients may now use generic `Duplex` streams in addition to `net.Socket`.
* **Intl**
* The deprecated `Intl.v8BreakIterator` has been removed.
* **Modules**
* The `require.resolve()` method now supports using custom lookup paths.
* **OS**
* The `os.EOL` property is now read-only.
* **Timers**
* `setTimeout()` will emit a warning if the timeout is larger that the maximum
32-bit unsigned integer.
Improved stream documentation with an example of how to decode buffers
to strings within a custom Writable.
Fixes: https://github.com/nodejs/node/issues/15369
PR-URL: https://github.com/nodejs/node/pull/16403
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
The original commit was landed without running CITGM. Unfortunately
this change breaks the module `d` which has over 500k downloads a day.
It is worth mentioning that the compatibility hack can be removed
without breaking anything.
We should definitely revisit for the next Semver-Major but shipping
this today will cause non trivial ecosystem breakages.
Refs: https://github.com/nodejs/node/pull/3384
PR-URL: https://github.com/nodejs/node/pull/16634
Refs: https://github.com/nodejs/node/pull/3384
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Migrates most of CipherBase errors to use internal/errors.
There are still a handful remaining that need to be handled
separately
PR-URL: https://github.com/nodejs/node/pull/16527
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
- Implements the make test-doc target that build, verify
and lint docs
- Lint the C++ snippets in addon docs
- When generating addons and running the JS linter,
use the global node executable if it is not built.
Therefore one does not have to build node in order to
run make test-doc.
PR-URL: https://github.com/nodejs/node/pull/16377
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Fixes: https://github.com/nodejs/node/issues/14847
PR-URL: https://github.com/nodejs/node/pull/16511
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
On 4 April 2017, Node.js versions v4.8.2 and v6.10.2 were
released. These versions bumped the vendored zlib library from
v1.2.8 to v1.2.11 in response to what it describes as low-severity
CVEs. In zlib v1.2.9, a change was made that causes an error to be
raised when a raw deflate stream is initialised with windowBits set
to 8.
In zlib v1.2.9, 8 become an invalid value for this parameter, and Node's zlib
module will crash if you call this:
```
zlib.createDeflateRaw({windowBits: 8})
```
On some versions this crashes Node and you cannot recover from it, while on some
versions it throws an exception. The permessage-deflate library up to
version v0.1.5 does make such a call with no try/catch
This commit reverts to the original behavior of zlib by gracefully changed
windowBits: 8 to windowBits: 9 for raw deflate streams.
Original-PR-URL: https://github.com/nodejs-private/node-private/pull/95
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/16511
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Complete the migration to the new error system of _stream_readable
and _stream_writable. Adds the corresponding documentation.
PR-URL: https://github.com/nodejs/node/pull/16589
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
With the exception of ThrowCryptoError, use internal/errors
to report fips unavailable or forced
PR-URL: https://github.com/nodejs/node/pull/16428
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
The PRIORITY field is only supported by HTTP/2 in a HEADERS frame
initiated by the client, not in a push request sent by the server.
Documents the recommended approach to set a silent priority as
used internally by nghttp2.
PR-URL: https://github.com/nodejs/node/pull/16451
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Libuv 1.15.0 improved console resize detection on Windows. This note is
no longer needed.
PR-URL: https://github.com/nodejs/node/pull/16320
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Provide `util.isDeepStrictEqual()` that works like
`assert.deepStrictEqual()` but returns a boolean rather than throwing an
error.
Several userland modules have needed this functionality and implemented
it independently. This functionality already exists in Node.js core, so
this exposes it for use by modules. Modules that have needed this
functionality include `lodash`, `concordance` (used by `ava`), and
`qunit`.
PR-URL: https://github.com/nodejs/node/pull/16084
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Ali Ijaz Sheikh <ofrobots@google.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Provide section headings for server-side and client side examples.
Add error handling and TLS to server-side example, following example
of `https`. Add error handling, TLS, more efficient Buffer usage,
and header printing to client example.
PR-URL: https://github.com/nodejs/node/pull/16366
Fixes: https://github.com/nodejs/node/issues/16345
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Move input argument validation to js, using internal/errors.
Also update docs
* `password` and `salt` may be Buffers or any TypedArrays
* `crypto.DEFAULT_ENCODING` changes the returned derivedKey type
PR-URL: https://github.com/nodejs/node/pull/15746
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Methods `buf.writeUIntLE()` and `buf.writeUIntBE()` were used
in the example code for the section of the methods
`writeIntLE()` and `writeIntBE()` instead of the latter.
PR-URL: https://github.com/nodejs/node/pull/16416
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/12815
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Support generic `Duplex` streams through more duck typing
on the server and client sides.
Since HTTP is, as a protocol, independent of its underlying transport
layer, Node.js should not enforce any restrictions on what streams
its HTTP parser may use.
Ref: https://github.com/nodejs/node/issues/16256
PR-URL: https://github.com/nodejs/node/pull/16267
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Support generic `Duplex` streams through using `StreamWrap`
on the server and client sides, and adding a `createConnection`
method option similar to what the HTTP/1 API provides.
Since HTTP2 is, as a protocol, independent of its underlying transport
layer, Node.js should not enforce any restrictions on what streams
its internals may use.
Ref: https://github.com/nodejs/node/issues/16256
PR-URL: https://github.com/nodejs/node/pull/16269
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Replace the non-existent method rstStreamWithCancel with rstWithCancel
PR-URL: https://github.com/nodejs/node/pull/16365
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Previously, various inputs other than non-negative integers would
produce incorrect results.
Added type-checking on input, returning false for anything other than
non-negative integers.
Also clarified in docs.
PR-URL: https://github.com/nodejs/node/pull/15567
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
This method is only useful for the internal mechanics of the REPLServer
and does not need to be exposed in user space. It was previously not
documented, so I believe a Runtime deprecation makes sense.
PR-URL: https://github.com/nodejs/node/pull/16242
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Jeremiah Senkpiel <fishrock123@rocketmail.com>
PR-URL: https://github.com/nodejs/node/pull/15409
Fixes: https://github.com/nodejs/node/issues/14553
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Nikolai Vavilov <vvnicholas@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
The `net`, `tls`, `http` and `https` module have the same
`server.listen()` method, but have a different documenation.
Changed to a consistent link to the documentation of the `net` module.
PR-URL: https://github.com/nodejs/node/pull/16020
Reviewed-By: Bryan English <bryan@bryanenglish.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
After this commit, `process.versions.v8` will look like:
"6.0.287.53-node.0".
The goal is that everytime we apply a non-official patch to `deps/v8`,
we increment our own number instead of V8's patch level.
This number must be set back to 0 after major V8 updates.
Fixes: https://github.com/nodejs/node/issues/15698
PR-URL: https://github.com/nodejs/node/pull/15785
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Ali Ijaz Sheikh <ofrobots@google.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Since `crypto.publicDecrypt()` and `crypto.publicEncrypt()` accept both
public and private keys, make it clear that the `passphrase` option only
applies to private keys.
PR-URL: https://github.com/nodejs/node/pull/16087
Ref: https://github.com/nodejs/node/pull/16038
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Nikolai Vavilov <vvnicholas@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Original text implied it returns physical cpu cores. This is misleading
as `os.cpus().length` is often used to get the CPU core count in
Node.js. In reality that will return the thread count which may not be
what the user intended.
PR-URL: https://github.com/nodejs/node/pull/16282
Fixes: https://github.com/nodejs/node/issues/16279
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Bryan English <bryan@bryanenglish.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Clarify return values for crypto.publicEncrypt and similar functions
PR-URL: https://github.com/nodejs/node/pull/16229
Fixes: https://github.com/nodejs/node/issues/12946
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
This commit exposes the UV_PROCESS_WINDOWS_HIDE flag in Node
as a windowsHide option to the child_process methods. The
option is only applicable to Windows, and is ignored elsewhere.
Fixes: https://github.com/nodejs/node/issues/15217
PR-URL: https://github.com/nodejs/node/pull/15380
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Update so that doc says to use NAPI_AUTO_LENGTH instead
of -1 to indicate null terminate string.
PR-URL: https://github.com/nodejs/node/pull/16187
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Move argument type checking to js, use internal/errors
PR-URL: https://github.com/nodejs/node/pull/15756
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Covert lib/net.js over to using lib/internal/errors.js
- Replace thrown errors in lib/net.js
with errors from lib/internal/errors.
The ERR_INVALID_OPT_VALUE error have been used
in the Server.prototype.listen() method
- Update tests according to the above modifications
PR-URL: https://github.com/nodejs/node/pull/14782
Refs: https://github.com/nodejs/node/issues/11273
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Explains the expected behavior of previousStat in fs.watchFile() when
a watched file disappears and reappears.
PR-URL: https://github.com/nodejs/node/pull/16099
Fixes: https://github.com/nodejs/node/issues/15364
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Claudio Rodriguez <cjrodr@yahoo.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Currently is rendered as "see the [UV_THREADPOOL_SIZE][]
documentation", since there was no link definition in the file.
PR-URL: https://github.com/nodejs/node/pull/16193
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
socket.getRecvBufferSize() and socket.getSendBufferSize()
do not take any parameter
PR-URL: https://github.com/nodejs/node/pull/16183
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Yuta Hiroto <hello@about-hiroppy.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/16134
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Stephen Belanger <admin@stephenbelanger.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/15990
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
This enables a --loader flag for Node, which can provide custom
"resolve" and "dynamicInstantiate" methods for custom ES module
loading.
In the process, module providers have been converted from classes
into functions and the module APIs have been made to pass URL strings
over objects.
PR-URL: https://github.com/nodejs/node/pull/15445
Reviewed-By: Bradley Farias <bradley.meck@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
