I've noticed that after some dedup tests system reboot ends up in
assertion about ms_defer tree not free. It seems to be caused by
DDT flushing still freeing some blocks while ZFS trying to reach
a final steady state due to spa_final_txg, while being set by
spa_export_common() on pool export, is not set when spa_unload()
is called by spa_evict_all() on system reboot/shutdown. Setting
spa_final_txg in spa_unload() fixes this issue.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17395
This patch fixes a race where vdev_remove_wanted may be set after probe
initiation, which could otherwise trigger redundant fault and removal.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#17400
If the kernel fails to allocate the gendisk, zvo_disk will be NULL, and
derefencing it will explode. So don't do that.
Sponsored-by: Klara, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17396
We silence `objtool` warnings on some object files using
`OBJECT_FILES_NON_STANDARD_some_file.o`. Nowadays `objtool` is
needed for CPU vulnerability mitigations and a lot more
functionality so its use is desirable.
Just remove the `OBJECT_FILES_NON_STANDARD` definitions. A follow-up
commit is needed to make the offending files standard and address
the compile time warnings.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#17401Closes#17364
Three occurences with an 'e', and all of them mine. Maybe it's an
British thing?
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
Since 3.17 Linux has provided param ops for 64-bit ints, so we don't
need to use our own anymore.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
Nothing uses them now.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
The use for spl_taskq_kick was the only use, and the comment that
module_param_call is obsolete is no longer true - it's still very much
used even in recent kernels.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
Nothing in any FreeBSD code uses them.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
If a variable is only available in the kernel, then the tunable should
also only be available there.
This matters very little so long as we don't have userspace tunables,
but its still good hygeine.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
It actually doesn't matter if it's not initialised when we first query
the current value; it just returns empty-string. A crash is quite
obnoxious even if it is a rare case.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
Likely it's only int64 for comparison with ssize_t, which is signed.
However, it would make no sense for it to be less than 0 or greater than
4G, so making it a regular uint will make it safe for comparison and
remove the only S64 tunable in core.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
failmode=continue is in a sorry state. Originally designed to fix a very
specific problem, it causes crashes and panics for most people who end
up trying to use it. At this point, we should either remove it entirely,
or try to make it more usable.
With this patch, I choose the latter. While the feature is fundamentally
unpredictable and prone to race conditions, it should be possible to get
it to the point where it can at least sometimes be useful for some
users. This patch fixes one of the major issues with failmode=continue:
it interrupts even ZIOs that are patiently waiting in line behind stuck
IOs.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Co-authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17372
It was reported that channel programs' zfs.get_prop doesn't work for
dataset properties encryption and encryptionroot.
They are handled in get_special_prop due to the need to call
dsl_dataset_crypt_stats to load those dsl props.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Co-authored-by: Graham Christensen <graham@grahamc.com>
Closes#17280
In truenas_pylibzfs, we query list of encrypted datasets several times,
which is expensive. This commit exposes a public API zfs_is_encrypted()
to get encryption status from fast stat path without having to refresh
the properties.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#17368
Before this change write log size TXG throttling mechanism was
accounting only user payload bytes. But the actual ZIL both on
disk and especially in memory include headers of hundred(s) of
bytes. Not accouting those may allow applications like
bonnie++, in their wisdom writing one byte at a time, to consume
excessive amount of memory and ZIL/SLOG in one TXG.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17373
Without this fix, zfs_range_tree_find_in could return an overlap when
the found range starts immediately after the searched range, with no
actual overlap.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17363
We don't really need to access space map to know where the metaslab
ends, while msp->ms_sm might be NULL.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Fixes#17164Fixes#17359Closes#17361
(cherry picked from commit 5c30b24381)
This was caught when doing a manual check to see if #17352 needed to be
improved to catch mismatches across stack frames of the kind that were
first found in #17340.
Reviewed-by: George Amanakis <gamanakis@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Richard Yao <richard@ryao.dev>
Closes#17353
(cherry picked from commit 83fa80a550)
Renamed in 6.2, and the compat wrapper removed in 6.15. No signature or
functional change apart from that, so a very minimal update for us.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17229
(cherry picked from commit 841be1d049)
The intent is that the filesystem may have a reference to an "old"
version of the new directory, eg if it was keeping it alive because a
remote NFS client still had it open.
We don't need anything like that, so this really just changes things so
we return error codes encoded in pointers.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17229
(cherry picked from commit bb740d66de)
d634d20d1b had been intended to fix a
potential information leak issue where the compiler's optimization
passes appeared to remove `memset()` operations that sanitize sensitive
data before memory is freed for use by the rest of the kernel.
When I wrote it, I had assumed that the compiler would not remove the
other `memset()` operations, but upon reflection, I have realized that
this was a bad assumption to make. I would rather have a very slight
amount of additional overhead when calling `gcm_clear_ctx()` than risk a
future compiler remove `memset()` calls. This is likely to happen if
someone decides to try doing link time optimization and the person will
not think to audit the assembly output for issues like this, so it is
best to preempt the possibility before it happens.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Richard Yao <richard@ryao.dev>
Closes#17343
(cherry picked from commit d8a33bc0a5)
Bisecting identified the redacted send/receive as the source of the bug
for issue #12014. Specifically the call to
dsl_dataset_hold_obj(&fromds) has been replaced by
dsl_dataset_hold_obj_flags() which passes a DECRYPT flag and creates
a key mapping. A subsequent dsl_dataset_rele_flag(&fromds) is missing
and the key mapping is not cleared. This may be inadvertedly used, which
results in arc_untransform failing with ECKSUM in:
arc_untransform+0x96/0xb0 [zfs]
dbuf_read_verify_dnode_crypt+0x196/0x350 [zfs]
dbuf_read+0x56/0x770 [zfs]
dmu_buf_hold_by_dnode+0x4a/0x80 [zfs]
zap_lockdir+0x87/0xf0 [zfs]
zap_lookup_norm+0x5c/0xd0 [zfs]
zap_lookup+0x16/0x20 [zfs]
zfs_get_zplprop+0x8d/0x1d0 [zfs]
setup_featureflags+0x267/0x2e0 [zfs]
dmu_send_impl+0xe7/0xcb0 [zfs]
dmu_send_obj+0x265/0x360 [zfs]
zfs_ioc_send+0x10c/0x280 [zfs]
Fix this by restoring the call to dsl_dataset_hold_obj().
The same applies for to_ds: here replace dsl_dataset_rele(&to_ds) with
dsl_dataset_rele_flags().
Both leaked key mappings will cause a panic when exporting the
sending pool or unloading the zfs module after a non-raw send from
an encrypted filesystem.
Contributions-by: Hank Barta <hbarta@gmail.com>
Contributions-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#12014Closes#17340
(cherry picked from commit ea74cdedda)
Currently, commands that resume a scrub/errorscrub from a paused state
don't get logged in the pool history. This is because resumes actually
return ECANCELED, instead of 0. This causes the tsd code in the common
ioctl logic to not think the ioctl succeeded, which causes the
log_history ioctl to fail with EPERM. However, for resuming a scrub from
a paused state, ECANCELED is success.
There are two options for how to deal with this. The first is the one
that I implemented here; I can't find a good reason for dmu_scan to
return ECANCELED on resume instead of 0, so let's just not. The only
place we check for the ECANCELED value is in zpool_scan, where we just
convert it back to zero. However, I am aware that this is changing an
ioctl interface, which I believe is a breaking change. I don't think
it's an important change, but maybe there is someone who relies on it.
The other option that could be implemented is to either allow ECANCELED
specifically from dsl_scan in the common ioctl code, or add a generic
facility to the common ioctl code that allows each command to specify
whether or not success happened, regardless of the return values. I am
open to feedback on which option people think would be better.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#17301
(cherry picked from commit 086105f4c4)
ARC target size might drop significantly under memory pressure,
especially if current ARC size was much smaller than the target.
Since dbuf cache size is a fraction of the target ARC size, it
might need eviction too. Aside of memory from the dbuf eviction
itself, it might help ARC by making more buffers evictable.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17314
(cherry picked from commit 89a8a91582)
For UIO_ITER, we are just wrapping a kernel iterator. It will take care
of its own offsets if necessary. We don't need to do anything, and if we
do try to do anything with it (like advancing the iterator by the skip
in zfs_uio_advance) we're just confusing the kernel iterator, ending up
at the wrong position or worse, off the end of the memory region.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17298
(cherry picked from commit 2ee5b51a57)
db.db_mtx must be held any time that db.db_data is accessed. All of
these functions do have the lock held by a parent; add assertions to
ensure that it stays that way.
See https://github.com/openzfs/zfs/discussions/17118
* Refactor dbuf_read_bonus to make it obvious why db_rwlock isn't
required.
* Refactor dbuf_hold_copy to eliminate the db_rwlock
Copy data into the newly allocated buffer before assigning it to the db.
That way, there will be no need to take db->db_rwlock.
* Refactor dbuf_read_hole
In the case of an indirect hole, initialize the newly allocated buffer
before assigning it to the dmu_buf_impl_t.
Sponsored by: ConnectWise
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes#17209
(cherry picked from commit c17bdc4914)
SYSCTL_SIZEOF() has been introduced in FreeBSD by commit "sysctl(9):
Ease exporting struct sizes; Discourage doing that" (713abc9880aa) in
branch 'main'. It will soon be backported to 'stable/14'. We will thus
be able to remove the old, alternate version left in the '#else' branch
as soon as 'stable/13' goes out of support (April 30, 2026).
Sponsored-by: The FreeBSD Foundation
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Olivier Certner <olce@FreeBSD.org>
Closes#17309
(cherry picked from commit 78628a5c15)
With certain combinations of target ARC states balance and ghost
hit rates it was possible to get the fractions outside of allowed
range. This patch limits maximum balance adjustment speed, which
should make it impossible, and also asserts it.
Fixes#17210
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
(cherry picked from commit b1ccab1721)
txg_wait_synced_sig() is "wait for txg, unless a signal arrives". We
expect that future development will require similar "wait unless X"
behaviour.
This generalises the API as txg_wait_synced_flags(), where the provided
flags describe the events that should cause the call to return.
Instead of a boolean, the return is now an error code, which the caller
can use to know which event caused the call to return.
The existing call to txg_wait_synced_sig() is now
txg_wait_synced_flags(TXG_WAIT_SIGNAL).
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
(cherry picked from commit a7de203c86)
We should not clear scn_state and notify waiters until we call
vdev_dtl_reassess(), otherwise following offline/detach request
may fail with "no valid replicas".
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
(cherry picked from commit f86d9af16b)
It's possible for two spares to get attached to a single failed vdev.
This happens when you have a failed disk that is spared, and then you
replace the failed disk with a new disk, but during the resilver
the new disk fails, and ZED kicks in a spare for the failed new
disk. This commit checks for that condition and disallows it.
Reviewed-by: Akash B <akash-b@hpe.com>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes: #16547Closes: #17231
(cherry picked from commit f40ab9e399)
### Background
Various admin operations will be invoked by some userspace task, but the
work will be done on a separate kernel thread at a later time. Snapshots
are an example, which are triggered through zfs_ioc_snapshot() ->
dsl_dataset_snapshot(), but the actual work is from a task dispatched to
dp_sync_taskq.
Many such tasks end up in dsl_enforce_ds_ss_limits(), where various
limits and permissions are enforced. Among other things, it is necessary
to ensure that the invoking task (that is, the user) has permission to
do things. We can't simply check if the running task has permission; it
is a privileged kernel thread, which can do anything.
However, in the general case it's not safe to simply query the task for
its permissions at the check time, as the task may not exist any more,
or its permissions may have changed since it was first invoked. So
instead, we capture the permissions by saving CRED() in the user task,
and then using it for the check through the secpolicy_* functions.
### Current implementation
The current code calls CRED() to get the credential, which gets a
pointer to the cred_t inside the current task and passes it to the
worker task. However, it doesn't take a reference to the cred_t, and so
expects that it won't change, and that the task continues to exist. In
practice that is always the case, because we don't let the calling task
return from the kernel until the work is done.
For Linux, we also take a reference to the current task, because the
Linux credential APIs for the most part do not check an arbitrary
credential, but rather, query what a task can do. See
secpolicy_zfs_proc(). Again, we don't take a reference on the task, just
a pointer to it.
### Changes
We change to calling crhold() on the task credential, and crfree() when
we're done with it. This ensures it stays alive and unchanged for the
duration of the call.
On the Linux side, we change the main policy checking function
priv_policy_ns() to use override_creds()/revert_creds() if necessary to
make the provided credential active in the current task, allowing the
standard task-permission APIs to do the needed check. Since the task
pointer is no longer required, this lets us entirely remove
secpolicy_zfs_proc() and the need to carry a task pointer around as
well.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
(cherry picked from commit c8fa39b46c)
Originally the Lustre ZFS OSD code was going to use zfs_uio_t structs
for supporting Direct I/O with ZFS. However, this has changed to using
abd_t structs instead. This exports the proper symbols that will be used
by the Lustre ZFS OSD code.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#17256
(cherry picked from commit 7031a48c70)
dbuf_prefetch_impl() should look on level of current indirect, not
the target prefetch level. dbuf_prefetch_indirect_done() should
call dnode_level_is_l2cacheable() if we have dpa_dnode to pass it.
It should fix some both false positive and negative L2ARC caching.
While there, fix redacted feature activation assertions. One was
always true, while another could give false positive if dpa_dnode
is NULL.
George Amanakis <gamanakis@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17204
(cherry picked from commit a497c5fc8b)
Since embedded blocks introduction 11 years ago, their writing was
blocked if dedup is enabled. After searching through the modern
code I see no reason for this restriction to exist. Same time
embedded blocks are dramatically cheaper. Even regular write of
so small blocks would likely be cheaper than deduplication, even
if the last is successful, not mentioning otherwise.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17113
(cherry picked from commit 09f4dd06c3)
Previous implementation of zap_leaf_array_free() put chunks on the
free list in reverse order. Also zap_leaf_transfer_entry() and
zap_entry_remove() were freeing name and value arrays in reverse
order. Together this created a mess in the free list, making
following allocations much more fragmented than necessary.
This patch re-implements zap_leaf_array_free() to keep existing
chunks order, and implements non-destructive zap_leaf_array_copy()
to be used in zap_leaf_transfer_entry() to allow properly ordered
freeing name and value arrays there and in zap_entry_remove().
With this change test of some writes and deletes shows percent of
non-contiguous chunks in DDT reducing from 61% and 47% to 0% and
17% for arrays and frees respectively. Sure some explicit sorting
could do even better, especially for ZAPs with variable-size arrays,
but it would also cost much more, while this should be very cheap.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16766
(cherry picked from commit 9a81484e35)
Fix build errors on Fedora 42 like:
module/zcommon/zfs_valstr.c:193:16: error: initializer-string for
array of 'char' truncates NUL terminator but destination lacks
'nonstring' attribute (3 chars into 2 available)
The arrays in zpool_vdev_os.c and zfs_valstr.c don't need to be
NULL terminated, but we do so to make GCC happy.
Closes: #17242
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
IVs != 96 bits get hashed with GHASH to bring them to 96 bits. Any call
to GHASH will mix the ghash state in gcm_ghash. This is expected to be
zero at first use in an encrypt or decrypt operation, so it needs to be
zeroed after using GHASH in setup.
gcm_init() does this, but gcm_avx_init() zeroed it before setup, not
after, resulting in incorrect encrypt/decrypt results when using AVX GCM
with an IV != 96 bits.
OpenZFS _always_ uses a 96 bit IV (ZIO_DATA_IV_LEN) so this will never
have been hit in any real-world use, which is extremely fortunate, as we
would have incorrectly-encrypted data on-disk. Still, as long as we have
this code here we should make sure it's correct.
Thanks-to: Joel Low <joel@joelsplace.sg>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Attila Fülöp <attila@fueloep.org>
The 6.0 kernel removes the 'migratepage' VFS op. Check for
migratepage.
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org
When a dedup write fails, we try to roll the DDT entry back to a known
good state. However, this also rolls the refcounts and the last-update
time back to the state they were at when we started this write. This
doesn't appear to be able to cause any refcount leaks (after the fix in
17123). This PR prevents that from happening by only rolling back the
parts of the DDT entry that have been updated by the write so far.
Sponsored-by: iXsystems, Inc.
Sponsored-by: Klara, Inc.
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Co-authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
When opening a vdev and setting the nonrot property, we used to wait for
each child to be opened before examining its nonrot property. When the
change was made to open vdevs asynchronously, we didn't move the nonrot
check out of the main loop. As a result, the nonrot property is almost
always set to false, regardless of the actual type of the underlying
disks. The fix is simply to move the nonrot check to a separate loop
after the taskq has been waited for.
Sponsored-by: Klara, Inc.
Sponsored-by: Eshtek, Inc.
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Co-authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
FreeBSD kernel's WITNESS code detected lock ordering violation in
spa_vdev_remove_cancel_sync(). It took svr_lock while holding
ms_lock, which is opposite to other places. I was thinking to
resolve it similar to #17145, but looking closer I don't think
we even need svr_lock at that point, since we already asserted
svr_allocd_segs is empty, and we don't need to add there segments
we are going to call free_mapped_segment_cb for.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17164
Since spa_dspace accounts only normal allocation class space,
spa_nonallocating_dspace should do the same. Otherwise we may get
negative overflow or respective assertion spa_update_dspace() if
removed special/dedup vdev is bigger than all normal class space.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17183
In addition to hotplug events, the kernel may also mark a failing vdev
as REMOVED. This was observed in a customer report and reproduced by
forcing the NVMe host driver to disable the device after a failed reset
due to command timeout. In such cases, the spare was not activated
because the device had already transitioned to a REMOVED state before
zed processed the event.
To address this, explicitly attempt hot spare activation when the
kernel marks a device as REMOVED.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#17187
When after device removal we handle block pointers remap, skip blocks
that might be cloned. BRTs are indexed by vdev id and offset from
block pointer's DVA[0]. So if we start addressing the same block by
some different DVA, we won't get the proper reference counter. As
result, we might either remap the block twice, that may result in
assertion during indirect mapping condense, or free it prematurely,
that may result in data overwrite, or free it twice, that may result
in assertion in spacemap code.
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15604Closes#17180
It turns out that approach taken in the original version of the patch
was wrong. So now, we're taking approach in-line with how kernel
actually does it - when sb is being torn down, access to it
is serialized via sb->s_umount rwsem, only when that lock is taken
is it okay to work with s_flags - and the other mistake I was doing
was trying to make SB_ACTIVE work, but apparently the kernel checks
the negative variant - not SB_DYING and not SB_BORN.
Kernels pre-6.6 don't have SB_DYING, but check if sb is hashed
instead.
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
spa_vdev_remove_thread() should not hold svr_lock while loading a
metaslab. It may block ZIO threads, required to handle metaslab
loading, at least in case of read errors causing recovery writes.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17145
The vd->vdev_ms access can overflow due to on-disk corruption, not just
due to programming bugs. So it makes sense to check its boundaries even
in production builds.
Sponsored by: ConnectWise
Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes#17136
This helps to avoids confusion with the similarly-named
txg_wait_synced().
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Mariusz Zaborski <mariusz.zaborski@klarasystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
People have noted there's no way to remove a pool userprop, only zero
it. Turns vdev userprops had a method, by setting empty-string. So this
makes pool userprops follow the same behaviour.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16887
Force receive (zfs receive -F) can rollback or destroy snapshots and
file systems that do not exist on the sending side (see zfs-receive man
page). This means an user having the receive permission can effectively
delete data on receiving side, even if such user does not have explicit
rollback or destroy permissions.
This patch adds the receive:append permission, which only permits
limited, non-forced receive. Behavior for users with full receive
permission is not changed in any way.
Fixes#16943
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Gionatan Danti <g.danti@assyoma.it>
Closes#17015
Implementation of DDT pruning introduced verification of DVAs in
a block pointer during ddt_lookup() to not by mistake free previous
pruned incarnation of the entry. But when writing a new block in
zio_ddt_write() we might have the DVAs only from override pointer,
which may never have "D" flag to be confused with pruned DDT entry,
and we'll abandon those DVAs if we find a matching entry in DDT.
This fixes deduplication for blocks written via dmu_sync() for
purposes of indirect ZIL write records, that I have tested. And
I suspect it might actually allow deduplication for Direct I/O,
even though in an odd way -- first write block directly and then
delete it later during TXG commit if found duplicate, which part
I haven't tested.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17120
This statx(2) mask returns the alignment restrictions for O_DIRECT
access on the given file.
We're expected to return both memory and IO alignment. For memory, it's
always PAGE_SIZE. For IO, we return the current block size for the file,
which is the required alignment for an arbitrary block, and for the
first block we'll fall back to the ARC when necessary, so it should
always work.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16972
Now instead of crashing when attempting to read the corrupt block
pointer, ZFS will return ECKSUM, in a stack that looks like this:
```
none:set-error
zfs.ko`arc_read+0x1d82
zfs.ko`dbuf_read+0xa8c
zfs.ko`dmu_buf_hold_array_by_dnode+0x292
zfs.ko`dmu_read_uio_dnode+0x47
zfs.ko`zfs_read+0x2d5
zfs.ko`zfs_freebsd_read+0x7b
kernel`VOP_READ_APV+0xd0
kernel`vn_read+0x20e
kernel`vn_io_fault_doio+0x45
kernel`vn_io_fault1+0x15e
kernel`vn_io_fault+0x150
kernel`dofileread+0x80
kernel`sys_read+0xb7
kernel`amd64_syscall+0x424
kernel`0xffffffff810633cb
```
This patch should hopefully also prevent such corrupt block pointers
from being written to disk in the first place.
And in zdb, don't crash when printing a block pointer with no valid
DVAs. If a block pointer isn't embedded yet doesn't have any valid
DVAs, that's a data corruption bug. zdb should be able to handle the
situation gracefully.
Finally, remove an extra check for gang blocks in SNPRINTF_BLKPTR. This
check, which compares the asizes of two different DVAs within the same
BP, was added by illumos-gate commit b24ab67[^1], and I can't understand
why. It doesn't appear to do anything useful, so remove it.
[^1]: b24ab67627
Fixes #17077
Sponsored by: ConnectWise
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com>
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes#17078
PR #14161 made spa_do_crypt_objset_mac_abd() to ignore MAC errors
if local MAC can not be calculated at the time. But it does not
mean we should also ignore portable MAC errors there.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17122
Adding fields to zinject_record_t unexpectedly extended zfs_cmd_t,
preventing some things working properly with 2.3.1 userspace tools
against 2.3.0 kernel module.
This reverts commit fabdd502f4.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
In l2arc_evict(), the config lock may be acquired in reverse order
(e.g., first the config lock (writer), then a hash lock) unlike in
arc_read() during scenarios like L2ARC device removal. To avoid
deadlocks, if the attempt to acquire the config lock (reader) fails
in arc_read(), release the hash lock, wait for the config lock, and
retry from the beginning.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#17071
Don't try to get mg of hole vdev in removal
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17080
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: SHENGYI HONG <aokblast@FreeBSD.org>
Closes#17088
Before this change zfs_metaslab_switch_threshold tunable switched
metaslabs each time ones index reduced by two (which means biggest
contiguous chunk reduced to 1/4). It is a good idea to balance
metaslabs fragmentation. But for empty metaslabs (having power-
of-2 sizes) this means switching when they get just below the half
of their capacity. Inspection with zdb after filling new pool to
half capacity shown most of its metaslabs filled to half capacity.
I consider this sub-optimal for pool fragmentation in a long run.
This change blocks the metaslabs switching if most of the metaslab
free space (15/16) is represented by a single contiguous range.
Such metaslab should not be considered fragmented until it actually
fail some big allocation. More contiguous filling should improve
data locality and increase time before previously filled and
partially freed metaslab is touched again, giving it more time to
free more contiguous chunks for lower fragmentation. It should
also slightly reduce spacemap traffic.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17081
zfs_file_fsync() and zfs_file_deallocate() are both blocking ops, so the
zio_taskq thread is active and blocked both while waiting for the IO
call and then while calling zio_execute() for the next stage. This is a
particular issue for FLUSH, as the z_flush_iss queue typically only has
one thread; multiple flushes arriving at once can cause long delays if
the underlying fsync() response is particularly slow.
To fix this, we dispatch both FLUSH and TRIM to the z_vdev_file taskq,
just as we do for reads and writes. Further, we return all results
through zio_interrupt(), so neither the issue nor the file taskqs are
blocked.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17064
Need to use arc_free_data_abd to free abd type buffer.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes#17079
Kernel & userspace specifics are in zfs_file_os.c, so there's no
particular reason these have to be separate.
The one platform-specific part is in the Linux kernel part, to offload
flushes to a taskq if we're already inside a filesystem transaction.
This would be normally be an unsatisfying wart, but I'm intending to
remove this shortly, so I'm content to leave it gated for the moment.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Since we are calculating a free space fragmentation, we should
weight metaslabs by the amount of their free space, not a full
size. Fragmentation of full metaslabs may not matter in presence
empty ones. The old algorithm did not differentiate metaslabs
having only one free 4KB block from metaslabs having 50% of space
free in 4KB blocks, reporting higher fragmentation.
While there, move metaslab_group_alloc_update() call after setting
mg_fragmentation, otherwise the effect may be delayed by one TXG.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Linux 6.12 has conflicting range_tree_{find,destroy,clear} symbols.
Signed-off-by: Ivan Volosyuk <Ivan.Volosyuk@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
skc->skc_name also needs to be freed in an error path.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Vandana Rungta <vrungta@amazon.com>
Closes#17041
The purpose of no-op is to simulate a failure between a device cache and
its permanent store. We still want it to go through the queue and
respond in the same way to everything else.
So, inject "success" as the very last thing, and then move on to
VDEV_IO_DONE to be dequeued and so any followup work can occur.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17029
"DESTDIR=/path/to/target/root/ make install" may fail when installing to
a root that contains an existing lib/modules structure. When run as root
we may even affect the wrong kernel (the build system's one, or, if
running a different version, some other directory in /lib/modules, but
not the desired one installed in DESTDIR).
Add a missing reference to the INSTALL_MOD_PATH root when calling
"depmod" during "make install"
Also add a switch "DONT_DELETE_MODULES_FILES=1" that skips the removal
of files named "modules.*" prior to running depmod.
Signed-off-by: Christian Kohlschütter <christian@kohlschutter.com>
Closes#16994
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Gang blocks have a significant impact on the long and short term
performance of a zpool, but there is not a lot of observability into
whether they're being used. This change adds gang-specific kstats to
ZFS, to better allow users to see whether ganging is happening.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17003
When you are using large recordsizes in conjunction with raidz, with
incompressible data, you can pretty reliably be making 21 MB
allocations. Unfortunately, the fragmentation metric in ZFS considers
any metaslabs with 16 MB free chunks completely unfragmented, so you can
have a metaslab report 0% fragmented and be unable to satisfy an
allocation. When using the segment-based metaslab weight, this is
inconvenient; when using the space-based one, it can seriously degrade
performance.
We expand the fragmentation table to extend up to 512MB, and redefine
the table size based on the actual table, rather than having a static
define. We also tweak the one variable that depends on fragmentation
directly.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#16986
According to the upstream change, all callers set it, and all block
devices either honoured it or ignored it, so removing it entirely allows
a bunch of handling for the "unset" case to be removed, and it becomes
effectively implied.
We follow suit, and keep setting it for older kernels.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
This is a convenience for filesystems that need the inode of their
parent or their own name, as its often complicated to get that
information. We don't need those things, so this is just detecting which
prototype is expected and adjusting our callback to match.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
As zios are reexecuted after resume from suspension, their ready and
wait states need to be propagated to wait counts on all their parents.
It's possible for those parents to have active children passing through
READY or DONE, which then end up in zio_notify_parent(), take their
parent's lock, and decrement the wait count. Without also taking a lock
here, it's possible for an increment race to occur, which leads to
either there being no references left (tripping the assert in
zio_notify_parent()), or a parent waiting forever for a nonexistent
child to complete.
To protect against this, we simply take the appropriate zio locks in
zio_reexecute() before updating the wait counts.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17016
This change will prevent prefetch to perform unnecessary ARC buffer
fill when reading from disk.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Jaydeep Kshirsagar <jkshirsagar@maxlinear.com>
Co-authored-by: Alexander Motin <mav@FreeBSD.org>
Closes#17013
Originally #16856 updated Linux Direct I/O requests to use the new
pin_user_pages API. However, it was an oversight that this PR only
handled iov_iter's of type ITER_IOVEC and ITER_UBUF. Other iov_iter
types may try and use the pin_user_pages API if it is available. This
can lead to panics as the iov_iter is not being iterated over correctly
in zfs_uio_pin_user_pages().
Unfortunately, generic iov_iter API's that call pin_user_page_fast() are
protected as GPL only. Rather than update zfs_uio_pin_user_pages() to
account for all iov_iter types, we can simply just call
zfs_uio_get_dio_page_iov_iter() if the iov_iter type is not ITER_IOVEC
or ITER_UBUF. zfs_uio_get_dio_page_iov_iter() calls the
iov_iter_get_pages() calls that can handle any iov_iter type.
In the future it might be worth using the exposed iov_iter iterator
functions that are included in the header iov_iter.h since v6.7. These
functions allow for any iov_iter type to be iterated over and advanced
while applying a step function during iteration. This could possibly be
leveraged in zfs_uio_pin_user_pages().
A new ZFS test case was added to test that a ITER_BVEC is handled
correctly using this new code path. This test case was provided though
issue #16956.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#16956Closes#17006
The flag VFCF_FILEREV was recently defined in FreeBSD
so that a file system could indicate that it increments
va_filerev by one for each change.
Since ZFS does do this, set the flag if defined for the
kernel being built. This allows the NFSv4.2 server to
reply with the correct change_attr_type attribute value.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rick Macklem <rmacklem@uoguelph.ca>
Closed#16976
Injecting a device probe failure is not possible by matching IO types,
because probe IO goes to the label regions, which is explicitly excluded
from injection. Even if it were possible, it would be awkward to do,
because a probe is sequence of reads and writes.
This commit adds a new IO "type" to match for injection, which looks for
the ZIO_FLAG_PROBE flag instead. Any probe IO will be match the
injection record and recieve the wanted error.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16947
I'm about to add a new "type", and I need somewhere to put it!
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16947
To do a cross-build using only kbuild rather than a full source tree,
ARCH= needs to be passed for the kbuild Makefile to find the
archspecific Makefile.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16944
When building tests with zinject, it can be quite difficult to work out
if you're producing the right kind of IO to match the rules you've set
up.
So, here we extend injection records to count the number of times a
handler matched the operation, and how often an error was actually
injected (ie after frequency and other exclusions are applied).
Then, display those counts in the `zinject` output.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#16938
We should not hardcode 512-byte read size when checking for loader
in the boot area before RAIDZ expansion. Disk might be unable to
handle that I/O as is, and the code zio_vdev_io_start() handling
the padding asserts doing it only for top-level vdev.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16942
