The key is freed using 'gnutls_privkey_deinit(pkcs11key)', yet the
following memory leaks show up that are most likely in the pkcs11 module.
Skip the test if ASAN is being used to avoid the test failure.
Direct leak of 55080 byte(s) in 1 object(s) allocated from:
#0 0x7fdabb152af7 in calloc (/lib64/libasan.so.6+0xaeaf7)
#1 0x7fdab6b737c6 in C_Initialize (/usr/lib64/pkcs11/libtpm2_pkcs11.so+0x147c6)
#2 0x7fdab9a5f8a9 in initialize_module_inlock_reentrant (/lib64/libp11-kit.so.0+0x2b8a9)
#3 0x7fdab9a5fc88 in managed_C_Initialize (/lib64/libp11-kit.so.0+0x2bc88)
#4 0x7fdab9a66018 in p11_kit_modules_initialize (/lib64/libp11-kit.so.0+0x32018)
#5 0x7fdab9a66778 in p11_kit_modules_load_and_initialize (/lib64/libp11-kit.so.0+0x32778)
#6 0x7fdabab10dc5 in auto_load (/lib64/libgnutls.so.30+0x9cdc5)
#7 0x7fdabab12656 in gnutls_pkcs11_init (/lib64/libgnutls.so.30+0x9e656)
#8 0x7fdabab12779 in _gnutls_pkcs11_check_init (/lib64/libgnutls.so.30+0x9e779)
#9 0x7fdabab1af1f in gnutls_pkcs11_privkey_import_url (/lib64/libgnutls.so.30+0xa6f1f)
#10 0x7fdabaaee0e3 in gnutls_privkey_import_url (/lib64/libgnutls.so.30+0x7a0e3)
#11 0x40abee in main /home/stefanb/dev/swtpm/src/swtpm_cert/ek-cert.c:1399
#12 0x7fdab9f5ab74 in __libc_start_main (/lib64/libc.so.6+0x27b74)
#13 0x40366d in _start (/home/stefanb/dev/swtpm/src/swtpm_cert/swtpm_cert+0x40366d)
Indirect leak of 8208 byte(s) in 1 object(s) allocated from:
#0 0x7fdabb152af7 in calloc (/lib64/libasan.so.6+0xaeaf7)
#1 0x7fdab6b736f9 in C_Initialize (/usr/lib64/pkcs11/libtpm2_pkcs11.so+0x146f9)
#2 0x7fdab9a5f8a9 in initialize_module_inlock_reentrant (/lib64/libp11-kit.so.0+0x2b8a9)
#3 0x7fdab9a5fc88 in managed_C_Initialize (/lib64/libp11-kit.so.0+0x2bc88)
#4 0x7fdab9a66018 in p11_kit_modules_initialize (/lib64/libp11-kit.so.0+0x32018)
#5 0x7fdab9a66778 in p11_kit_modules_load_and_initialize (/lib64/libp11-kit.so.0+0x32778)
#6 0x7fdabab10dc5 in auto_load (/lib64/libgnutls.so.30+0x9cdc5)
#7 0x7fdabab12656 in gnutls_pkcs11_init (/lib64/libgnutls.so.30+0x9e656)
#8 0x7fdabab12779 in _gnutls_pkcs11_check_init (/lib64/libgnutls.so.30+0x9e779)
#9 0x7fdabab1af1f in gnutls_pkcs11_privkey_import_url (/lib64/libgnutls.so.30+0xa6f1f)
#10 0x7fdabaaee0e3 in gnutls_privkey_import_url (/lib64/libgnutls.so.30+0x7a0e3)
#11 0x40abee in main /home/stefanb/dev/swtpm/src/swtpm_cert/ek-cert.c:1399
#12 0x7fdab9f5ab74 in __libc_start_main (/lib64/libc.so.6+0x27b74)
#13 0x40366d in _start (/home/stefanb/dev/swtpm/src/swtpm_cert/swtpm_cert+0x40366d)
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
To run the tests you need to build swtpm first and then you can run the
tests using the following command line:
SWTPM_TEST_EXPENSIVE=1 SWTPM_TEST_STORE_VOLATILE=1 SWTPM_TEST_IBMTSS2=1 make check
You may omit the environment variables if you don't want to run
the more time-consuming tests.
SWTPM_TEST_EXPENSIVE=1 enables the following tests:
test_tpm12
test_tpm2_ibmtss2
SWTPM_TEST_STORE_VOLATILE=1 enables storing and restoring of the volatile
state at every step of the test_tpm2_ibmtss2 test. This environment
variable only has an effect if SWTPM_TEST_EXPENSIVE=1 is set.
SWTPM_TEST_IBMTSS2=1 enables the following tests
test_tpm2_save_load_state_2
test_tpm2_save_load_state_3
Some tests require root rights, especially those involving the CUSE TPM
and the vTPM proxy device. To run these and all the other ones you
can use the following command line:
sudo bash -c "SWTPM_TEST_EXPENSIVE=1 SWTPM_TEST_STORE_VOLATILE=1 SWTPM_TEST_IBMTSS2=1 make check"
35c6c90128