The PID filename was generated using the ${SWTPM} environment variable,
which caused test failures if set to a URL for example. Replace it with
'swptm'.
This issue was reported in issue #454.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
- Move swtpm_localca's sources out of samples/ (where they no longer
belong now that swtpm_localca is a binary) to src/swtpm_localca/.
- Tests now call the swtpm_localca binary directly at the location
where it was built, as they do with all other compiled programs.
- Simplify samples/swtpm-localca.in and delete swtpm-localca.2inst,
removing the now-unnecessary logic to selectively call swtpm_localca
from different locations (samples/ when running tests vs. /usr/bin/
post-installation).
Signed-off-by: Nick Chevsky <nchevsky@users.noreply.github.com>
- Makes swtpm_setup.conf.in consistent with the rest of the sample
configuration files in swtpm, whose templates ship in samples/ and
install the generated files to /etc.
- Works around dh_missing(1) erroneously reporting swtpm_setup.conf as
non-installed due to its having two copies in the build tree (one in
etc/ and another in debian/tmp/etc/).
Signed-off-by: Nick Chevsky <nchevsky@users.noreply.github.com>
The test test_tpm2_save_load_state seems to have been forgotten
about and was not run. Add it now to the the tests to run.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Modify a test case and write an environment variable into the
swtpm_setup.conf config file to test that it gets resolved.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Changes to libtpms will require that the volatile state files
during this test may be larger than 9000 bytes.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Add restoring of the volatile state after having it stored.
Since this is now taking a long time it must be explicitly enabled
by setting the environment variable SWTPM_TEST_STORE_VOLATILE=1.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
If we are running the tests as a user that doesn't have a git config
setup we run into the following issue when trying to apply patches
suing 'git am':
Committer identity unknown
*** Please tell me who you are.
Run
git config --global user.email "you@example.com"
git config --global user.name "Your Name"
to set your account's default identity.
Omit --global to set the identity only in this repository.
This patch fixes this by setting the git config on the local checkout
before using 'git am'.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Apply patches to the IBM TSS2 test suite rather than using sed on its
files and other types of file manipulations.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
This patch adds a test case for testing the fix for libtpms
issue 195: https://github.com/stefanberger/libtpms/issues/195
This patch now requires that the latest TPM version from master or the
branches is installed.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Upgrade to use the IBM TSS2 tests from v1.6.0.
Add a patch that eliminates all testing of 3072 bit RSA keys in case
libtpms does not support such keys. Also disable a test case related
to ACT for older revisions.
This test passes with libtpms 0.8.0 as well libtpms 0.6.0 and 0.7.0.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
test_samples_create_tpmca needs to wait longer for the pid file content
to be there not just until the file is available.
test_tpm2_save_load_state_2 needs to dump the TPM log file on failure.
Failures occurred rarely because the previous instance of swtpm had
not shut down yet and released the lock file while the new instance
wanted to lock the lockfile. So we have to wait a bit until the
previous instance is gone.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
This patch fixes the following issue:
$ ./src/swtpm/swtpm chardev --print-capabilities --tpm2
swtpm: Error: Missing character device or file descriptor
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
This patch adds support for partial reads to the CUSE swtpm.
We introduce a ptm_read_offset variable that holds the offset where to read
from next. It is reset every time a command has been processed as part of a
write() so that subsequent read()s start reading from offset 0. It is
advanced by the number of bytes that were read.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Due to recent changes in tcsd, it doesn't accept 'tss:tss 0600' anymore
for the tcsd config file but we need to use 'root:tss 0640' for it.
So far only Fedora seems to be affected. It now depends on whether tcsd
has been patched what ownership is required. So we try first the old
configuration and then the new one.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
This patch fixes the path to swtpm-localca to avoid this type of
error because of swtpm_localca_conf having been created in another
directory. This error occurred whan running
sudo bash -c "make -j32 distcheck"
Traceback (most recent call last):
File "/home/stefanb/tmp/swtpm/swtpm-0.5.0/samples/swtpm-localca", line 5, in <
from py_swtpm_localca.swtpm_localca import main
File "/home/stefanb/tmp/swtpm/swtpm-0.5.0/samples/py_swtpm_localca/swtpm_local
from py_swtpm_localca.swtpm_localca_conf import SYSCONFDIR
ModuleNotFoundError: No module named 'py_swtpm_localca.swtpm_localca_conf'
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Some distros (openSUSE) have deprecated the 'net-tools' package,
so we allow for 'ss' as an alternative tool from the
iproute/iproute2 package. This is only relevant for test cases.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Start tpm2-abrmd for the test case 'test_tpm2_samples_create_tpmca' rather than
expecting it to be already running.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Apply the password for the signing key and parent key when creating a
platform certificate. The bug was introduced in commit 961bb827
"samples: Use new pwd format option for secretly passing passwords"
Extend a test case to ensure that the passwords are always used.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Get rid of the 'c' code that only changed the user and add for support of
the --runas option to change to a different user in the python part.
To get 'make distcheck' to work I needed to name the swtpm_setup python
script with the suffix .in so that it gets copied to the build directory
as swtpm_setup. We need to change execute permissions on this file after
copying.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Switch over to the new python implementation of swtpm_setup. We need to
also adjust test cases that involved the tcsd that otherwise fail for
various reasons. For in-place testing we need to adjust the PYTHONPATH
and PATH so that swtpm_setup.py can be found and so that swtpm_setup.py
then finds swtpm if it is not explicitly passed as parameter.
Adjust the man page for swtpm_setup to reflect the changes.
We now can run swtpm_setup as any user. However, libvirt still runs it
as tss:tss (for example), which is then creating the signing key as tss:tss
as well. Ideally libvirt would run it as tss:root or any other combination
since the tss group may be used for user wanting to access /dev/tpmrm0 for
example. We at least change the directory ownership of /var/lib/swtpm-localca
to tss:root and keep the world out of this directory.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Modify the pkcs11 related test case to set the environment variable for
softhsm_setup to use the temporary directory for config file and state
of softhsm. Also set the SOFTHSM2_CONF environment variable since
certtool also uses the pkcs11 module which in turn will look for its
config file.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Use softhsm's SOFTHSM2_CONF environment variable to set the directory
where the configration file is located so that we can now use a temporary
directory for the location of the directory. Use the environment variable
SOFTHSM_SETUP_CONFIGDIR to set the directory where softhsm_setup can
setup its temporary environment for the config file and state of softhsm.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Slow systems, like Cygwin, need so much time from taking the time to sending
the command that we need to take the current time again to check whether the
success is valid. Previously the test may have failed since the old time that
was taken did not allow the success to be valid.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
The OpenBSD implementation of 'od -tx1' prints two spaces between
hexbytes, thus the grep for "00 00 00 00" fails and we report an
invalid error. This patch fixes this by squeezing the two consecutive
spaces.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
We have occasional test failures on Travis running tests on OS X where
time seems to be going backwards in the dictionary attack timeout test.
This patch tries to detect that the time went backwards and skip the
test once a failure would have been detected.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Extend the swtpm-localca test with odd vmid string to ensure
that they go into the certificate unmodified.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Have the tpm2_ptool use a store in the temporary directory so that
with every test we have a clean environment.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Assign the unique port 65452/65354 to test_tpm2_save_load_state to
avoid conflict with test_tpm_probe also using
SWTPM_SERVER_PORT=65526
SWTPM_CTRL_PORT=65527
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Assign the unique ports 65450/65451 to test_tpm2_sample_create_tpmca
to avoid clashes with test_samples_create_tpmca that is using
SWTPM_SERVER_PORT=65434
SWTPM_CTRL_PORT=65435
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Assign unique ports 65448/65449 to test_tpm2_setbuffersize to avoid clash
with test_samples_create_tpmca using TCSD_LISTEN_PORT=65436.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
The generated sample keys started with 00010203, thus leaving the upper
15 bits of the key as '0', which in turn causes gnutls to think that the
key is only 2033 bit long, thus rejecting certificate verification once
the min-verification-profile is set to 'medium' in gnutls's config file
in /etc/crypto-policies/back-ends/gnutls.config.
We now create sample keys starting with 800102, which sets the highest bit.
This fixes test errors on Fedora Rawhide due to the change in the
min-verification-profile setting in gnutls.config.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
The OpenBSD implementation of 'od -tx1' prints two spaces between
hexbytes, thus the grep for "00 00 00 00" fails and we report an
invalid error. This patch fixes this by squeezing the two consecutive
spaces.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Upgrade to use the IBM TSS2 tests from v1.5.0.
Add a patch that eliminates all testing of 3072 bit RSA keys in case
libtpms does not support such keys. This test also passes with libtpms
0.6.0 and 0.7.0.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
libtpms version 0.6.3, 0.7.3, and master have a change to the TPM 2 code
that affects the pcrUpdateCounter, which now returns a smaller value than
before.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
The first part of the derived key test only works fine on 64 bit
little endian machines. Skip big endian machines.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Extend the --print-capabilities option to also report supported RSA
key sizes. Only the TPM 2 may support anything else than 2048 bit RSA
keys, so we only consult 'swtpm socket --tpm2 --print-capabilities'
and grep for 2048 and 3072 key sizes and report them.
If nothing is found, nothing is reported, as before, and 2048 bit RSA
keys should be assumed.
'swtpm_setup --tpm2 --print-capabilities' may now show the following:
{
"type": "swtpm_setup",
"features": [
"cmdarg-keyfile-fd",
"cmdarg-pwdfile-fd",
"tpm2-rsa-keysize-2048",
"tpm2-rsa-keysize-3072"
]
}
Also adjust a test case to use a regular expression for matching
against an expected string that may nor may not have rsa-keysize
verbs.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Check the libtpms capabilities via 'swtpm_ioctl -i 4' to see whether
libtpms supports RSA 3072 bit keys. Only if this is not the case
deactivate all RSA 3072 bit key tests.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Construct RSA key size capability strings from libtpms TPMLIB_GetInfo()
string so that we can easily show which RSA key sizes are supported by
the TPM 2 implementation. If none are advertised, 1024 & 2048 can be
assumed to be supported.
'swtpm socket --tpm2 --print-capabilities' may now print the following:
{
"type": "swtpm",
"features": [
"tpm-send-command-header",
"flags-opt-startup",
"cmdarg-seccomp",
"cmdarg-key-fd",
"cmdarg-pwd-fd",
"no-tpm12-tools",
"rsa-keysize-1024",
"rsa-keysize-2048",
"rsa-keysize-3072"
]
}
We need to adapt the related test case to use a regular expression since
the rsa-keysize-xyz strings may or may not be there depending on libtpms
version.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
If the host is missing tcsd (trousers) or the tpm-tools, swtpm_setup
will now report the 'no-tpm12-tools' verb like this:
> swtpm_setup --print-capabilities | jq
{
"type": "swtpm_setup",
"features": [
"cmdarg-keyfile-fd",
"cmdarg-pwdfile-fd",
"no-tpm12-tools"
]
}
The only TPM 1.2 setup parameter that requires interaction with
the TPM 1.2 that can be pass is then '--createek'.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
tssgetcapability only retrieves a maximum of 64 handles by default.
However, there are 65 persisted keys. Pass -pc 80 to the command to
see all 65 Handles.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Add a test case that fills up the NVRAM area with as many persisted keys
as possible and then fills up the rest with an NVRAM index so that all
space is occupied. We have to be able to load this state again into the
NVRAM once the OBJECT's size increases due to RSA keys size increase,
which must have us increase the total size of NVRAM in libtpm's TPM profile.
The state in tests/data/tpm2state5/tpm2-00.permall was created using
libtpms 0.6.0, where only 2048 bit keys were supported and total NVRAM size
was 128kb. This state file should never be changed and always be loadable
into a current libtpms. In its USER NVRAM it holds 64 persisted 2048 bit
keys and an NVRAM index with 236 bytes. For this to stay the reference
NVRAM, we need to make sure that it fits exactly to the byte.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Sometimes the download of the TPM 1.2 test suite from sourceforge
fails. So retry up to 3 times and wait a random seconds in the interval
of [3..10] before retrying.
Check the hash of the file we downloaded to make sure we get what we
expected.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Add a test case testing the returned value from
swtpm <iface> --tpm2 --print-capabilities
along with those return from swtpm_setup.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Extend the script that creates a CA that uses a TPM 2 for signing.
For this we have to create tokens using the TPM 2 pkcs11 module's
tpm2_ptool and can then use the p11tool for creating keys.
Add a test case that requires a running tpm2-abrmd and tpm2_ptool.
Eventually the test case should (try to) start its own tpm2-abrmd
and talk to swtpm directly but the tcti module to do that isn't
available as a package, yet.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Create orderly NVRAM indices and then clear the TPM 2 so that NvDeleteRam()
gets executed and we get better code coverage.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Modify the test_tpm2_save_load_state_3 to create 2 orderly NVRAM indices
in the first two locations. Those indices will be cleared by a reset
of the TPM and therefore cannot be read once the TPM 2 restarts after
the reset. This also provides better test coverage.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
The IBM TSS2 is available starting with Bionic. Use it there
to extend the test coverage of the code.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
To make the test cases work on Travis on Bionic replace all occurrences of
localhost with 127.0.0.1. The only affected client tools seem to be those
related to the TPM 1.2 and the IBM TSS2. For some reason the API used
there cannot resolve localhost to 127.0.0.1.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
The simplest way to detect whether SWTPM_EXE is a 64 bit application on
Linux is to check whether it links against any library in a */lib64/*
directory and only if this is the case we run a particular test case for
which we know what keys 64 bit TPMs are producing given a pre-created
state.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Upgrade to use the IBM TSS2 tests from v1.4.0 but eliminate all testing
with 3072 bit RSA keys.
This test also passes with libtpms 0.6.0 and 0.7.0.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
'swtpm chardev --vptm-proxy' currently requires a '--flag startup-xyz'
to be passed since otherwise the need_init_cmd variable would not be
set to false and swtpm would terminate after sending the startup
command. To maintain backwards compatibility we have to always
set the need_init_cmd variable to false for the --vtpm-proxy case
and must not require a startup flag to be passed.
Roll back one of the test case to not use the startup flag.
Fixes: e6bc4bdf0 ('swtpm: Enable sending startup commands ...')
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
libtpms may not support TDES, so we have to skip test case 4 in
case we encounter an allowed error message.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Adjust the vtpm proxy test case and others to make use of the new
startup options. Make sure that subsequent Startups sent to the
TPM fail with the expected error code.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Give swtpm more time to close the port. This became an issue when running
the tests and all executables are valgrind'ed.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Add support for the --print-capabilities option to display newly
added capabilities. Adpat the man page and related test case.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Allow passing signing key and parent key via files and file descriptors
and environment variables. Adapt a test case to exercise this new
functionality.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Address several issues reported by shellcheck and protect
variables with quotes so we now can have filenames with spaces.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
This patch addresses several issues found with shellcheck. In particular
it now enables variables with spaces in them, such as file paths that
contain spaces.
Adjust one of the accompanying test cases to use spaces in the path.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Protect variables with quotes so that pathnames with spaces are now
supported.
Adjust the accompanying test case to make use of spaces in file paths.
Address several issues found by shellcheck. Some of them are false
positives especially when it comes to protecting variables passed
to a commaned in an 'eval' line. They must not be protected, otherwise
they are not passed correctly.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
The Ubuntu (PPA) build system executes the build on an environment that
has problems with seccomp profiles. It does not allow us to run the test
suite with swtpm applying its seccomp profile since it fails with a
'bad system call' error. To work around this we introduce the env. variable
SWTPM_TEST_SECCOMP_OPT that we can set to "--seccomp action=none" to avoid
having swtpm apply it seccomp profile.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Move wait_port_open and wait_port_closed to common file and handle
the timeout errors in test_commandline.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Wait for the PID file to appear rather than reading it right away.
This addresses an issue when runnin the test suite under valgrind
(make -j $(nproc) check).
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
SWTPM_EXE may be 'valgrind ... swtpm', so we have to protect it with quotes
when passing it as a parameter to a function.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Delay the reading of the PID file if it is found to be empty.
This can happend if swtpm is run by valgrind.
Also, use the passed parameters rather than the global ones to check
the PID file contents against the expected pid. So far this worked
because PID and PID_FILE were variables used by every caller.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
When running the TPM 1.2 vtpm_proxy test cases by launching the
swtpm with valgrind it may take a long time for the log to be
written and the device to appear. This is due to the self test
of the TPM 1.2 taking a while. So we need to move the reading
of the device into a loop and set the timeout of the loop to 10s
so that it passed under these circumstances.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
The byte stream contained the TDES identifier at the wrong position,
so no TDES key was created. This patch fixes this but needs an update
to libtpms since some unmarshalling/marshaling code related to TDES
was missing there as well.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Extend the existing key derivation test case for TPM 2 with test cases
that use a newer TPM 2 state where we now exercise the new
CryptAdjustPrimeCandidate algorithm that produces the same results on
big and little enidan 32 bit and 64 bit machines. This newer algorithm
is available in libtpms with revision 155 of the TPM 2 code.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Use v1.3.0 of the IBM TSS 2.0 repo.
Depending on the revision that libtpms implements, some test cases have to be
replaced with empty files.
The test suite now works with the libtpms stable-0.6.0 and stable-0.7.0
branches. A patch fixing an NV PIN issue needed to be applied to those
branches.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
The test_print_capability is failing if SWTPM_EXE is for example
holding more than one parameter like 'valgrind ... /bin/swtpm' since the
variable was not protected with quotes. This patch fixes this.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
If the test environment is running in a seccomp profile do not check
that the seccomp profile of the swtpm process runs with the action
provided in --seccomp action=... since the environment may override
this.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Get the PID of the started swtpm from the shell and validate it
against the contents of the pidfile afterwards.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Add TPM 1.2 test cases to test_parameters for testing the passing of key
and passphrase via file descriptor. Also extend the test to check whether
the state files are encrypted.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Make sure that when keyfile/keyfile-fd or pwdfile/pwdfile-fd are passed
to swtpm_setup that the resulting state is actually encrypted. We check
for encrypted state by making sure that 4-byte sequences of 0-bytes are
not there while they are there for un-encrypted state.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
The old prime number generation algorithm also does not return
the same numbers on ppc64 (big endian) as on x86_64 or ppc64le,
so do not run the test there.
Signed-off-by: Stefan Berger <stefanb@linu.ibm.com>
When the PID_FILE is passed to swtpm as a file descriptor in one test,
we already create a file without content when running
'exec 100<>$PID_FILE'. So we have to extend wait_for_file to also
wait for file content since the 0.2 seconds delay are sometimes not
enough for content to have been written. Otherwise we do not get the
PID of the process. We can extend the function in this way since all
its usages imply that some content should become available.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Use the IPv6 bindaddr ::1 where available on Linux. Travis doesn't
seem to support IPv6 addresses at the moment.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Extend the previously modified test case to also test on
Darwin now that we are able to convert a file descriptor
to a filename.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
On Linux and Cygwin we can pass a file descriptor for the pid
file, on other platforms it doesn't work (yet).
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Pass the --runas parameter to swtpm so we can test switching it
to a given user 'nobody'.
We also have to change ownership of files and directories so that
the nobody user can write the coverage files when swtpm ends.
In the test case we then use the trick of changing file ownership
just before we terminate swtpm, which will trigger the writing
of the .gcda files. We need to have nobody own these files.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Use the mode= parameter of the TPM's state file and a unix
socket to have swtpm set the file mode bits and check that
they are set as expected.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
- Clean up state files in case the test suite was interrupted
- Allow running it from the test directory by creating an absolute
path for TESTDIR so we can find the patch file; error out in
case the patching fails
- Run test case 2 and 1 as well but ignore ERROR output in case
of test 1. The errors stem from us not restarting the TPM when
the test suite asks for it.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Add a test case that downloads the TPM 1.2 package from sourceforge,
patches a few files for OpenSSL compatibility, and runs a few test
cases of that test suite. Look for ERROR output in the test suite.
This test suite also provides better code coverage for libtpms.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
To prevent the test case from failing when an no --prefix is used
when configuring, use an empty options file via /dev/null. Otherwise
swtpm-localca starts looking for the options file in a place where
there is none.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Softhsm cannot be installed as an i386 executable/library and as
a x86_64 executable/library on a Fedora host. The pkcs11 test then
fails since it cannot pick up the libsofthsm.so needed for an i386
executable (swtpm_cert) on a x86_64 host. This fixes test run errors
for run_test.sh by skipping the test in case swtpm_cert returns
a specific error message related to not being able to import the
pkcs11 URI object.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Use wait_process_gone with 2 seconds timeout to wait for the swtpm to
have terminated after SIGTERM or connection loss. This avoids test
failures on slow Raspberry Pi 2.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
We need to run the softhsm/pkcs11 test case as root (sudo) under OS X
so that we can write the file /etc/gnutls/pkcs11.conf. However, once
we run the tests as root we cannot run the 'brew ls' command anymore
since it refuses to run with high privileges. So, if we run as root we
need to use sudo to switch to the nobody user to run the 'brew ls'
command that gives us the name of the softhsm pkcs11 module.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
On OS X we need to be able to change /etc/gnutls/pkcs11.conf for
p11tool to pick up the softhsm pkcs11 module correctly. We need
(password-less) sudo to be able to do this.
Unforutnately this test case does not run on Travis since Travis
seems to require passwords under some circumstances.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Use SoftHSM to create a pkcs11 URI and then use the pkcs11 URI
to sign the certificate of a TPM 2.0 with this key using swtpm-localca.
This test case works with softhsm >= 2.3.0 on Fedora and should work
with a recent version of Ubuntu. If an error is encountered setting
up the softhsm2 environment, we just skip the test.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Older versions of the IBM TSS2, such as in FC26 for example, behave
slightly different than the code in the test case expects (certain
files are not generated or may have a different name). So gate this
test case with SWTPM_TEST_IBMTSS2 environment variable so we don't run
it by default if the TSS tools are found and so we do not run into
possible errors due to an older version of the stack installed on the
system.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
To get better code coverage, convert existing test case to
use one time a hex formatted key and the other time the same
key in binary format.
Do some improvements on the test code on the way.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
2 file sizes were missing. Also use $() to execut commands rather
than ``. Use get_filesize to get the size of a file.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Extend the swtpm-create-tpmca test with test cases using the
'well known' password of 20 zero bytes if tpmtool supports the
--srk-well-known option.
Besides that, extend the existing test to actually use the TPM CA
for signing a TPM 1.2 or TPM 2 (test) EK and check the contents of the
certificate by grepping through the text info provided by certtool.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Refactor the swtpm-create-tpmca test case so we can use it for
testing with the 'well known' (20 bytes of zeros) SRK password
in the next pass.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Run the TPM CA setup script with a local swtpm and tcsd instance.
We have to take ownership of the TPM and set its SRK passwork so
that the TPM CA setup script can create a signing key as a child
key of the SRK.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Support creation and usage of the root CA with a password protected
private key. The root CA's key password can be set using the environment
variable SWTPM_ROOTCA_PASSWORD.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Some tests are expected to fail. Capture the error output and test it
against epected error output. This also makes the test output less
noisy.
Also remove some other output noise.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Shut down the swtpm process at the end to avoid it being killed
and with that getting noise in the test log.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Get the IBM TSS2 test suite from its git repo, compile it, and run
its test suite if SWTPM_TEST_EXPENSIVE=1 is set.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Wait a few seconds for files to appear or disappear after starting the
swtpm process. This helps avoid test failures when the system is under
load.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Add a delay of 0.2s after a file is found in wait_for_file so that the
process can also write into it. Sometimes we are also interested in the
content and don't seem to get the content since we didn't wait for
the file to have been written to. It happens occasionally when the system
is under load that we don't seem to be able to read the file content
afterwards.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
To avoid timeouts when running the tests with valgrind, increase
the timeout until the swtpm process must have terminated after a
shutdown signal to 4 seconds.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Call a function display_processes_by_name that displays all processes
if needed. The function is quiet, though.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Fedora policy seems to be to use python3 explicitly for the hashbang
rather than python, which could be either python2 or python3. So convert
it to python3. Also adapt configure.ac to require python3 executable.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Use pbkdf2 as the default kdf and sha512 for the existing
test case. Do away with file limit of 32 bytes. This may
break backwards compatibility for some but better to do this
before a release...
Switch the existing test cases to use kdf=sha512 on the command
line where necessary to that the state for these test cases
does not need to be recreated.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
On some systems /bin/bash does not exists but the bash is somewhere
else and can be invoked with /usr/bin/env bash.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Some test cases that root has to run did not pass the out-of-tree
builds. We need to pass the top level source dir to these test cases
and change some variable accessing config files to the right directory
for the out-of-tree build to work.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
If the file descriptor 100 is open prior to trying to open
it, it must be closed first on OS/X, otherwise we get test
case failures due to interrupted connections.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
The -cs parameter to swtpm_bios is like -c -s and therefore ambiguous.
Use the unambiguous long version --cs. This makes the test case work
on NetBSD, which does not support getopt_long_only().
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
