Add restoring of the volatile state after having it stored.
Since this is now taking a long time it must be explicitly enabled
by setting the environment variable SWTPM_TEST_STORE_VOLATILE=1.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Apply patches to the IBM TSS2 test suite rather than using sed on its
files and other types of file manipulations.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Upgrade to use the IBM TSS2 tests from v1.6.0.
Add a patch that eliminates all testing of 3072 bit RSA keys in case
libtpms does not support such keys. Also disable a test case related
to ACT for older revisions.
This test passes with libtpms 0.8.0 as well libtpms 0.6.0 and 0.7.0.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
This patch adds support for partial reads to the CUSE swtpm.
We introduce a ptm_read_offset variable that holds the offset where to read
from next. It is reset every time a command has been processed as part of a
write() so that subsequent read()s start reading from offset 0. It is
advanced by the number of bytes that were read.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Switch over to the new python implementation of swtpm_setup. We need to
also adjust test cases that involved the tcsd that otherwise fail for
various reasons. For in-place testing we need to adjust the PYTHONPATH
and PATH so that swtpm_setup.py can be found and so that swtpm_setup.py
then finds swtpm if it is not explicitly passed as parameter.
Adjust the man page for swtpm_setup to reflect the changes.
We now can run swtpm_setup as any user. However, libvirt still runs it
as tss:tss (for example), which is then creating the signing key as tss:tss
as well. Ideally libvirt would run it as tss:root or any other combination
since the tss group may be used for user wanting to access /dev/tpmrm0 for
example. We at least change the directory ownership of /var/lib/swtpm-localca
to tss:root and keep the world out of this directory.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Upgrade to use the IBM TSS2 tests from v1.5.0.
Add a patch that eliminates all testing of 3072 bit RSA keys in case
libtpms does not support such keys. This test also passes with libtpms
0.6.0 and 0.7.0.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Add a test case that fills up the NVRAM area with as many persisted keys
as possible and then fills up the rest with an NVRAM index so that all
space is occupied. We have to be able to load this state again into the
NVRAM once the OBJECT's size increases due to RSA keys size increase,
which must have us increase the total size of NVRAM in libtpm's TPM profile.
The state in tests/data/tpm2state5/tpm2-00.permall was created using
libtpms 0.6.0, where only 2048 bit keys were supported and total NVRAM size
was 128kb. This state file should never be changed and always be loadable
into a current libtpms. In its USER NVRAM it holds 64 persisted 2048 bit
keys and an NVRAM index with 236 bytes. For this to stay the reference
NVRAM, we need to make sure that it fits exactly to the byte.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Add a test case testing the returned value from
swtpm <iface> --tpm2 --print-capabilities
along with those return from swtpm_setup.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Extend the script that creates a CA that uses a TPM 2 for signing.
For this we have to create tokens using the TPM 2 pkcs11 module's
tpm2_ptool and can then use the p11tool for creating keys.
Add a test case that requires a running tpm2-abrmd and tpm2_ptool.
Eventually the test case should (try to) start its own tpm2-abrmd
and talk to swtpm directly but the tcti module to do that isn't
available as a package, yet.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Allow passing signing key and parent key via files and file descriptors
and environment variables. Adapt a test case to exercise this new
functionality.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Extend the existing key derivation test case for TPM 2 with test cases
that use a newer TPM 2 state where we now exercise the new
CryptAdjustPrimeCandidate algorithm that produces the same results on
big and little enidan 32 bit and 64 bit machines. This newer algorithm
is available in libtpms with revision 155 of the TPM 2 code.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Add a test case that downloads the TPM 1.2 package from sourceforge,
patches a few files for OpenSSL compatibility, and runs a few test
cases of that test suite. Look for ERROR output in the test suite.
This test suite also provides better code coverage for libtpms.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Use SoftHSM to create a pkcs11 URI and then use the pkcs11 URI
to sign the certificate of a TPM 2.0 with this key using swtpm-localca.
This test case works with softhsm >= 2.3.0 on Fedora and should work
with a recent version of Ubuntu. If an error is encountered setting
up the softhsm2 environment, we just skip the test.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Run the TPM CA setup script with a local swtpm and tcsd instance.
We have to take ownership of the TPM and set its SRK passwork so
that the TPM CA setup script can create a signing key as a child
key of the SRK.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Get the IBM TSS2 test suite from its git repo, compile it, and run
its test suite if SWTPM_TEST_EXPENSIVE=1 is set.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Some test cases that root has to run did not pass the out-of-tree
builds. We need to pass the top level source dir to these test cases
and change some variable accessing config files to the right directory
for the out-of-tree build to work.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
test_tpm2_ctrlchannel2 was not active and was not complete. This
patch fixes the test case and activates it. It uses chardev, so
it needs to be gated by WITH_CHARDEV.
Signed-off-by: Stefran Berger <stefanb@linux.vnet.ibm.com>
With the SAN data in the certificate properly generated and accepted by
certtool, we can now activate the test case for swtpm-localca.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Introduce compile-time variable HAVE_TCSD if the TCSD could
be found. It influences whether TPM 1.2 related swtpm_setup
test cases can be run. If it is set, they can be run.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Run TPM 2 related swtpm_setup tests under less restrictions.
For TPM 2 related tests only WITH_GNUTLS, which allows swtpm_cert
to be built, needs to be set since swtpm_setup is now being built
under all conditions.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Pass the top_builddir and top_srcdir via TESTS_ENVIRONMENT
variable in Makefile.am.
Use TESTDIR for the path to the test directory and replace
previously used DIR in all occurences.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
A few files were wrong in the EXTRA_DIST file list due to changes to
test cases. Add the proper files.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Test the certs created by swtpm_localca by verifying the certificate
chain and checking their key usage.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Add a test case that tests the TPM 2 volatile state. This test
requires the latest TPM2 version of libtpms that also writes the
TPM Established bit into the volatile state.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Check the TPM2 state using the TPM2 utilities, if available.
Create persistent state and check it, then shut down the TPM 2 and
restart it, and check the persistent state again.
Use previously created state and have the TPM 2 start with it
and check the persistent state. The persistent state must be
readable on little and big endian machines.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Provide support for creating certificates for TPM2 ECC type of keys.
Extend the test cases and the man pages.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Support TPM 2 in swtpm_setup and swtpm_setup.sh.
Implement support for all command line options except for:
o --take-ownership and anything related to ownership passwords
o --lock-nvram
o --display
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
TPM2 allows the primary key to also be a signing key, so in case
--tpm2 is provided, --allow-signing can be provided as well in
case the primary can also be used for signing operations.
We use SHA256 for the signing algorithm when TPM 2 is being used.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Extend the swtpm_bios tool with a --tpm2 command line parameter
to support TPM 2 initialization.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Implement a command for setting and querying the buffer size the
TPM implementation (libtpms) is using. The setting of the
buffersize allows to reduce the size of the buffer to a size
that the interface can support so that these two sizes match
and the TPM will not produce larger responses than what the
interface can support.
Extend swtpm_ioctl with an option to set the buffersize.
Adapt the existing tests to reflect the newly supported command.
Implement a new test for getting/setting of the buffer size.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Copy the test case that use 'swtpm chardev' to test_ctrlchannel4
and convert this test in test_ctrlchannel to use a socket. Make
test_ctrlchannel run on all platforms. test_ctrlchannel4 only
runs when WITH_CHARDEV is set in the Makefile.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Split off the CMD_SET_DATAFD into its own file. This test only works on
Linux, so we skip it on Cygwin for example. Otherwise it should be able
to run.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
To enable the test suite to for example run a mixture of 32- and
64bit executables, allow users to specify the executables to use by
setting the variables SWTPM_EXE, SWTPM_IOCTL, and SWTPM_BIOS via
command line.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Refactor the tests so that they all run on socket interfaces as well.
Use socket ports in the range of 65400-65499 for TPM 1.2 tests.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Detect whether to build with the chardev interface and only run tests that
need the chardev if it is supported on a particular platform.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
