To test the replacement of environment variables with their values
use ${WORKDIR} in the test case config files.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
The PID filename was generated using the ${SWTPM} environment variable,
which caused test failures if set to a URL for example. Replace it with
'swptm'.
This issue was reported in issue #454.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Modify a test case and write an environment variable into the
swtpm_setup.conf config file to test that it gets resolved.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Changes to libtpms will require that the volatile state files
during this test may be larger than 9000 bytes.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Add restoring of the volatile state after having it stored.
Since this is now taking a long time it must be explicitly enabled
by setting the environment variable SWTPM_TEST_STORE_VOLATILE=1.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
If we are running the tests as a user that doesn't have a git config
setup we run into the following issue when trying to apply patches
suing 'git am':
Committer identity unknown
*** Please tell me who you are.
Run
git config --global user.email "you@example.com"
git config --global user.name "Your Name"
to set your account's default identity.
Omit --global to set the identity only in this repository.
This patch fixes this by setting the git config on the local checkout
before using 'git am'.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Apply patches to the IBM TSS2 test suite rather than using sed on its
files and other types of file manipulations.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
This patch adds a test case for testing the fix for libtpms
issue 195: https://github.com/stefanberger/libtpms/issues/195
This patch now requires that the latest TPM version from master or the
branches is installed.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Upgrade to use the IBM TSS2 tests from v1.6.0.
Add a patch that eliminates all testing of 3072 bit RSA keys in case
libtpms does not support such keys. Also disable a test case related
to ACT for older revisions.
This test passes with libtpms 0.8.0 as well libtpms 0.6.0 and 0.7.0.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
test_samples_create_tpmca needs to wait longer for the pid file content
to be there not just until the file is available.
test_tpm2_save_load_state_2 needs to dump the TPM log file on failure.
Failures occurred rarely because the previous instance of swtpm had
not shut down yet and released the lock file while the new instance
wanted to lock the lockfile. So we have to wait a bit until the
previous instance is gone.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
This patch fixes the following issue:
$ ./src/swtpm/swtpm chardev --print-capabilities --tpm2
swtpm: Error: Missing character device or file descriptor
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
This patch adds support for partial reads to the CUSE swtpm.
We introduce a ptm_read_offset variable that holds the offset where to read
from next. It is reset every time a command has been processed as part of a
write() so that subsequent read()s start reading from offset 0. It is
advanced by the number of bytes that were read.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Due to recent changes in tcsd, it doesn't accept 'tss:tss 0600' anymore
for the tcsd config file but we need to use 'root:tss 0640' for it.
So far only Fedora seems to be affected. It now depends on whether tcsd
has been patched what ownership is required. So we try first the old
configuration and then the new one.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
This patch fixes the path to swtpm-localca to avoid this type of
error because of swtpm_localca_conf having been created in another
directory. This error occurred whan running
sudo bash -c "make -j32 distcheck"
Traceback (most recent call last):
File "/home/stefanb/tmp/swtpm/swtpm-0.5.0/samples/swtpm-localca", line 5, in <
from py_swtpm_localca.swtpm_localca import main
File "/home/stefanb/tmp/swtpm/swtpm-0.5.0/samples/py_swtpm_localca/swtpm_local
from py_swtpm_localca.swtpm_localca_conf import SYSCONFDIR
ModuleNotFoundError: No module named 'py_swtpm_localca.swtpm_localca_conf'
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Some distros (openSUSE) have deprecated the 'net-tools' package,
so we allow for 'ss' as an alternative tool from the
iproute/iproute2 package. This is only relevant for test cases.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Start tpm2-abrmd for the test case 'test_tpm2_samples_create_tpmca' rather than
expecting it to be already running.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Apply the password for the signing key and parent key when creating a
platform certificate. The bug was introduced in commit 961bb827
"samples: Use new pwd format option for secretly passing passwords"
Extend a test case to ensure that the passwords are always used.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Get rid of the 'c' code that only changed the user and add for support of
the --runas option to change to a different user in the python part.
To get 'make distcheck' to work I needed to name the swtpm_setup python
script with the suffix .in so that it gets copied to the build directory
as swtpm_setup. We need to change execute permissions on this file after
copying.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Switch over to the new python implementation of swtpm_setup. We need to
also adjust test cases that involved the tcsd that otherwise fail for
various reasons. For in-place testing we need to adjust the PYTHONPATH
and PATH so that swtpm_setup.py can be found and so that swtpm_setup.py
then finds swtpm if it is not explicitly passed as parameter.
Adjust the man page for swtpm_setup to reflect the changes.
We now can run swtpm_setup as any user. However, libvirt still runs it
as tss:tss (for example), which is then creating the signing key as tss:tss
as well. Ideally libvirt would run it as tss:root or any other combination
since the tss group may be used for user wanting to access /dev/tpmrm0 for
example. We at least change the directory ownership of /var/lib/swtpm-localca
to tss:root and keep the world out of this directory.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Modify the pkcs11 related test case to set the environment variable for
softhsm_setup to use the temporary directory for config file and state
of softhsm. Also set the SOFTHSM2_CONF environment variable since
certtool also uses the pkcs11 module which in turn will look for its
config file.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Use softhsm's SOFTHSM2_CONF environment variable to set the directory
where the configration file is located so that we can now use a temporary
directory for the location of the directory. Use the environment variable
SOFTHSM_SETUP_CONFIGDIR to set the directory where softhsm_setup can
setup its temporary environment for the config file and state of softhsm.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Slow systems, like Cygwin, need so much time from taking the time to sending
the command that we need to take the current time again to check whether the
success is valid. Previously the test may have failed since the old time that
was taken did not allow the success to be valid.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
The OpenBSD implementation of 'od -tx1' prints two spaces between
hexbytes, thus the grep for "00 00 00 00" fails and we report an
invalid error. This patch fixes this by squeezing the two consecutive
spaces.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
We have occasional test failures on Travis running tests on OS X where
time seems to be going backwards in the dictionary attack timeout test.
This patch tries to detect that the time went backwards and skip the
test once a failure would have been detected.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Extend the swtpm-localca test with odd vmid string to ensure
that they go into the certificate unmodified.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Have the tpm2_ptool use a store in the temporary directory so that
with every test we have a clean environment.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Assign the unique port 65452/65354 to test_tpm2_save_load_state to
avoid conflict with test_tpm_probe also using
SWTPM_SERVER_PORT=65526
SWTPM_CTRL_PORT=65527
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Assign the unique ports 65450/65451 to test_tpm2_sample_create_tpmca
to avoid clashes with test_samples_create_tpmca that is using
SWTPM_SERVER_PORT=65434
SWTPM_CTRL_PORT=65435
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Assign unique ports 65448/65449 to test_tpm2_setbuffersize to avoid clash
with test_samples_create_tpmca using TCSD_LISTEN_PORT=65436.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
The generated sample keys started with 00010203, thus leaving the upper
15 bits of the key as '0', which in turn causes gnutls to think that the
key is only 2033 bit long, thus rejecting certificate verification once
the min-verification-profile is set to 'medium' in gnutls's config file
in /etc/crypto-policies/back-ends/gnutls.config.
We now create sample keys starting with 800102, which sets the highest bit.
This fixes test errors on Fedora Rawhide due to the change in the
min-verification-profile setting in gnutls.config.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
The OpenBSD implementation of 'od -tx1' prints two spaces between
hexbytes, thus the grep for "00 00 00 00" fails and we report an
invalid error. This patch fixes this by squeezing the two consecutive
spaces.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Upgrade to use the IBM TSS2 tests from v1.5.0.
Add a patch that eliminates all testing of 3072 bit RSA keys in case
libtpms does not support such keys. This test also passes with libtpms
0.6.0 and 0.7.0.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
libtpms version 0.6.3, 0.7.3, and master have a change to the TPM 2 code
that affects the pcrUpdateCounter, which now returns a smaller value than
before.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
The first part of the derived key test only works fine on 64 bit
little endian machines. Skip big endian machines.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Extend the --print-capabilities option to also report supported RSA
key sizes. Only the TPM 2 may support anything else than 2048 bit RSA
keys, so we only consult 'swtpm socket --tpm2 --print-capabilities'
and grep for 2048 and 3072 key sizes and report them.
If nothing is found, nothing is reported, as before, and 2048 bit RSA
keys should be assumed.
'swtpm_setup --tpm2 --print-capabilities' may now show the following:
{
"type": "swtpm_setup",
"features": [
"cmdarg-keyfile-fd",
"cmdarg-pwdfile-fd",
"tpm2-rsa-keysize-2048",
"tpm2-rsa-keysize-3072"
]
}
Also adjust a test case to use a regular expression for matching
against an expected string that may nor may not have rsa-keysize
verbs.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Check the libtpms capabilities via 'swtpm_ioctl -i 4' to see whether
libtpms supports RSA 3072 bit keys. Only if this is not the case
deactivate all RSA 3072 bit key tests.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Construct RSA key size capability strings from libtpms TPMLIB_GetInfo()
string so that we can easily show which RSA key sizes are supported by
the TPM 2 implementation. If none are advertised, 1024 & 2048 can be
assumed to be supported.
'swtpm socket --tpm2 --print-capabilities' may now print the following:
{
"type": "swtpm",
"features": [
"tpm-send-command-header",
"flags-opt-startup",
"cmdarg-seccomp",
"cmdarg-key-fd",
"cmdarg-pwd-fd",
"no-tpm12-tools",
"rsa-keysize-1024",
"rsa-keysize-2048",
"rsa-keysize-3072"
]
}
We need to adapt the related test case to use a regular expression since
the rsa-keysize-xyz strings may or may not be there depending on libtpms
version.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
If the host is missing tcsd (trousers) or the tpm-tools, swtpm_setup
will now report the 'no-tpm12-tools' verb like this:
> swtpm_setup --print-capabilities | jq
{
"type": "swtpm_setup",
"features": [
"cmdarg-keyfile-fd",
"cmdarg-pwdfile-fd",
"no-tpm12-tools"
]
}
The only TPM 1.2 setup parameter that requires interaction with
the TPM 1.2 that can be pass is then '--createek'.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
tssgetcapability only retrieves a maximum of 64 handles by default.
However, there are 65 persisted keys. Pass -pc 80 to the command to
see all 65 Handles.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Add a test case that fills up the NVRAM area with as many persisted keys
as possible and then fills up the rest with an NVRAM index so that all
space is occupied. We have to be able to load this state again into the
NVRAM once the OBJECT's size increases due to RSA keys size increase,
which must have us increase the total size of NVRAM in libtpm's TPM profile.
The state in tests/data/tpm2state5/tpm2-00.permall was created using
libtpms 0.6.0, where only 2048 bit keys were supported and total NVRAM size
was 128kb. This state file should never be changed and always be loadable
into a current libtpms. In its USER NVRAM it holds 64 persisted 2048 bit
keys and an NVRAM index with 236 bytes. For this to stay the reference
NVRAM, we need to make sure that it fits exactly to the byte.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Sometimes the download of the TPM 1.2 test suite from sourceforge
fails. So retry up to 3 times and wait a random seconds in the interval
of [3..10] before retrying.
Check the hash of the file we downloaded to make sure we get what we
expected.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Add a test case testing the returned value from
swtpm <iface> --tpm2 --print-capabilities
along with those return from swtpm_setup.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
