Changes to libtpms will require that the volatile state files
during this test may be larger than 9000 bytes.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Apply the password for the signing key and parent key when creating a
platform certificate. The bug was introduced in commit 961bb827
"samples: Use new pwd format option for secretly passing passwords"
Extend a test case to ensure that the passwords are always used.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Extend the swtpm-localca test with odd vmid string to ensure
that they go into the certificate unmodified.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Assign the unique port 65452/65354 to test_tpm2_save_load_state to
avoid conflict with test_tpm_probe also using
SWTPM_SERVER_PORT=65526
SWTPM_CTRL_PORT=65527
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Assign unique ports 65448/65449 to test_tpm2_setbuffersize to avoid clash
with test_samples_create_tpmca using TCSD_LISTEN_PORT=65436.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
The generated sample keys started with 00010203, thus leaving the upper
15 bits of the key as '0', which in turn causes gnutls to think that the
key is only 2033 bit long, thus rejecting certificate verification once
the min-verification-profile is set to 'medium' in gnutls's config file
in /etc/crypto-policies/back-ends/gnutls.config.
We now create sample keys starting with 800102, which sets the highest bit.
This fixes test errors on Fedora Rawhide due to the change in the
min-verification-profile setting in gnutls.config.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
libtpms version 0.6.3, 0.7.3, and master have a change to the TPM 2 code
that affects the pcrUpdateCounter, which now returns a smaller value than
before.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Sometimes the download of the TPM 1.2 test suite from sourceforge
fails. So retry up to 3 times and wait a random seconds in the interval
of [3..10] before retrying.
Check the hash of the file we downloaded to make sure we get what we
expected.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
'swtpm chardev --vptm-proxy' currently requires a '--flag startup-xyz'
to be passed since otherwise the need_init_cmd variable would not be
set to false and swtpm would terminate after sending the startup
command. To maintain backwards compatibility we have to always
set the need_init_cmd variable to false for the --vtpm-proxy case
and must not require a startup flag to be passed.
Roll back one of the test case to not use the startup flag.
Fixes: e6bc4bdf0 ('swtpm: Enable sending startup commands ...')
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
libtpms may not support TDES, so we have to skip test case 4 in
case we encounter an allowed error message.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Adjust the vtpm proxy test case and others to make use of the new
startup options. Make sure that subsequent Startups sent to the
TPM fail with the expected error code.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Give swtpm more time to close the port. This became an issue when running
the tests and all executables are valgrind'ed.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Add support for the --print-capabilities option to display newly
added capabilities. Adpat the man page and related test case.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Allow passing signing key and parent key via files and file descriptors
and environment variables. Adapt a test case to exercise this new
functionality.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Address several issues reported by shellcheck and protect
variables with quotes so we now can have filenames with spaces.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
This patch addresses several issues found with shellcheck. In particular
it now enables variables with spaces in them, such as file paths that
contain spaces.
Adjust one of the accompanying test cases to use spaces in the path.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Protect variables with quotes so that pathnames with spaces are now
supported.
Adjust the accompanying test case to make use of spaces in file paths.
Address several issues found by shellcheck. Some of them are false
positives especially when it comes to protecting variables passed
to a commaned in an 'eval' line. They must not be protected, otherwise
they are not passed correctly.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
The Ubuntu (PPA) build system executes the build on an environment that
has problems with seccomp profiles. It does not allow us to run the test
suite with swtpm applying its seccomp profile since it fails with a
'bad system call' error. To work around this we introduce the env. variable
SWTPM_TEST_SECCOMP_OPT that we can set to "--seccomp action=none" to avoid
having swtpm apply it seccomp profile.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Move wait_port_open and wait_port_closed to common file and handle
the timeout errors in test_commandline.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Wait for the PID file to appear rather than reading it right away.
This addresses an issue when runnin the test suite under valgrind
(make -j $(nproc) check).
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
SWTPM_EXE may be 'valgrind ... swtpm', so we have to protect it with quotes
when passing it as a parameter to a function.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Delay the reading of the PID file if it is found to be empty.
This can happend if swtpm is run by valgrind.
Also, use the passed parameters rather than the global ones to check
the PID file contents against the expected pid. So far this worked
because PID and PID_FILE were variables used by every caller.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
When running the TPM 1.2 vtpm_proxy test cases by launching the
swtpm with valgrind it may take a long time for the log to be
written and the device to appear. This is due to the self test
of the TPM 1.2 taking a while. So we need to move the reading
of the device into a loop and set the timeout of the loop to 10s
so that it passed under these circumstances.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
The byte stream contained the TDES identifier at the wrong position,
so no TDES key was created. This patch fixes this but needs an update
to libtpms since some unmarshalling/marshaling code related to TDES
was missing there as well.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Extend the existing key derivation test case for TPM 2 with test cases
that use a newer TPM 2 state where we now exercise the new
CryptAdjustPrimeCandidate algorithm that produces the same results on
big and little enidan 32 bit and 64 bit machines. This newer algorithm
is available in libtpms with revision 155 of the TPM 2 code.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Use v1.3.0 of the IBM TSS 2.0 repo.
Depending on the revision that libtpms implements, some test cases have to be
replaced with empty files.
The test suite now works with the libtpms stable-0.6.0 and stable-0.7.0
branches. A patch fixing an NV PIN issue needed to be applied to those
branches.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
The test_print_capability is failing if SWTPM_EXE is for example
holding more than one parameter like 'valgrind ... /bin/swtpm' since the
variable was not protected with quotes. This patch fixes this.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
If the test environment is running in a seccomp profile do not check
that the seccomp profile of the swtpm process runs with the action
provided in --seccomp action=... since the environment may override
this.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Get the PID of the started swtpm from the shell and validate it
against the contents of the pidfile afterwards.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Add TPM 1.2 test cases to test_parameters for testing the passing of key
and passphrase via file descriptor. Also extend the test to check whether
the state files are encrypted.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Make sure that when keyfile/keyfile-fd or pwdfile/pwdfile-fd are passed
to swtpm_setup that the resulting state is actually encrypted. We check
for encrypted state by making sure that 4-byte sequences of 0-bytes are
not there while they are there for un-encrypted state.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
The old prime number generation algorithm also does not return
the same numbers on ppc64 (big endian) as on x86_64 or ppc64le,
so do not run the test there.
Signed-off-by: Stefan Berger <stefanb@linu.ibm.com>
When the PID_FILE is passed to swtpm as a file descriptor in one test,
we already create a file without content when running
'exec 100<>$PID_FILE'. So we have to extend wait_for_file to also
wait for file content since the 0.2 seconds delay are sometimes not
enough for content to have been written. Otherwise we do not get the
PID of the process. We can extend the function in this way since all
its usages imply that some content should become available.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Use the IPv6 bindaddr ::1 where available on Linux. Travis doesn't
seem to support IPv6 addresses at the moment.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Extend the previously modified test case to also test on
Darwin now that we are able to convert a file descriptor
to a filename.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
On Linux and Cygwin we can pass a file descriptor for the pid
file, on other platforms it doesn't work (yet).
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Pass the --runas parameter to swtpm so we can test switching it
to a given user 'nobody'.
We also have to change ownership of files and directories so that
the nobody user can write the coverage files when swtpm ends.
In the test case we then use the trick of changing file ownership
just before we terminate swtpm, which will trigger the writing
of the .gcda files. We need to have nobody own these files.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
