qemu/tests/libqos/pci.c
David Gibson b8cc4d0231 libqos: Move BAR assignment to common code
The PCI backends in libqos each supply an iomap() and iounmap() function
which is used to set up a specified PCI BAR.  But PCI BAR allocation takes
place entirely within PCI space, so doesn't really need per-backend
versions.  For example, Linux includes generic BAR allocation code used on
platforms where that isn't done by firmware.

This patch merges the BAR allocation from the two existing backends into a
single simplified copy.  The back ends just need to set up some parameters
describing the window of PCI IO and PCI memory addresses which are
available for allocation.  Like both the existing versions the new one uses
a simple bump allocator.

Note that (again like the existing versions) this doesn't really handle
64-bit memory BARs properly.  It is actually used for such a BAR by the
ivshmem test, and apparently the 32-bit MMIO BAR logic is close enough to
work, as long as the BAR isn't too big.  Fixing that to properly handle
64-bit BAR allocation is a problem for another time.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
2016-10-28 09:38:27 +11:00

374 lines
9.7 KiB
C

/*
* libqos PCI bindings
*
* Copyright IBM, Corp. 2012-2013
*
* Authors:
* Anthony Liguori <aliguori@us.ibm.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "libqos/pci.h"
#include "hw/pci/pci_regs.h"
#include "qemu/host-utils.h"
void qpci_device_foreach(QPCIBus *bus, int vendor_id, int device_id,
void (*func)(QPCIDevice *dev, int devfn, void *data),
void *data)
{
int slot;
for (slot = 0; slot < 32; slot++) {
int fn;
for (fn = 0; fn < 8; fn++) {
QPCIDevice *dev;
dev = qpci_device_find(bus, QPCI_DEVFN(slot, fn));
if (!dev) {
continue;
}
if (vendor_id != -1 &&
qpci_config_readw(dev, PCI_VENDOR_ID) != vendor_id) {
g_free(dev);
continue;
}
if (device_id != -1 &&
qpci_config_readw(dev, PCI_DEVICE_ID) != device_id) {
g_free(dev);
continue;
}
func(dev, QPCI_DEVFN(slot, fn), data);
}
}
}
QPCIDevice *qpci_device_find(QPCIBus *bus, int devfn)
{
QPCIDevice *dev;
dev = g_malloc0(sizeof(*dev));
dev->bus = bus;
dev->devfn = devfn;
if (qpci_config_readw(dev, PCI_VENDOR_ID) == 0xFFFF) {
g_free(dev);
return NULL;
}
return dev;
}
void qpci_device_enable(QPCIDevice *dev)
{
uint16_t cmd;
/* FIXME -- does this need to be a bus callout? */
cmd = qpci_config_readw(dev, PCI_COMMAND);
cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
qpci_config_writew(dev, PCI_COMMAND, cmd);
/* Verify the bits are now set. */
cmd = qpci_config_readw(dev, PCI_COMMAND);
g_assert_cmphex(cmd & PCI_COMMAND_IO, ==, PCI_COMMAND_IO);
g_assert_cmphex(cmd & PCI_COMMAND_MEMORY, ==, PCI_COMMAND_MEMORY);
g_assert_cmphex(cmd & PCI_COMMAND_MASTER, ==, PCI_COMMAND_MASTER);
}
uint8_t qpci_find_capability(QPCIDevice *dev, uint8_t id)
{
uint8_t cap;
uint8_t addr = qpci_config_readb(dev, PCI_CAPABILITY_LIST);
do {
cap = qpci_config_readb(dev, addr);
if (cap != id) {
addr = qpci_config_readb(dev, addr + PCI_CAP_LIST_NEXT);
}
} while (cap != id && addr != 0);
return addr;
}
void qpci_msix_enable(QPCIDevice *dev)
{
uint8_t addr;
uint16_t val;
uint32_t table;
uint8_t bir_table;
uint8_t bir_pba;
void *offset;
addr = qpci_find_capability(dev, PCI_CAP_ID_MSIX);
g_assert_cmphex(addr, !=, 0);
val = qpci_config_readw(dev, addr + PCI_MSIX_FLAGS);
qpci_config_writew(dev, addr + PCI_MSIX_FLAGS, val | PCI_MSIX_FLAGS_ENABLE);
table = qpci_config_readl(dev, addr + PCI_MSIX_TABLE);
bir_table = table & PCI_MSIX_FLAGS_BIRMASK;
offset = qpci_iomap(dev, bir_table, NULL);
dev->msix_table = offset + (table & ~PCI_MSIX_FLAGS_BIRMASK);
table = qpci_config_readl(dev, addr + PCI_MSIX_PBA);
bir_pba = table & PCI_MSIX_FLAGS_BIRMASK;
if (bir_pba != bir_table) {
offset = qpci_iomap(dev, bir_pba, NULL);
}
dev->msix_pba = offset + (table & ~PCI_MSIX_FLAGS_BIRMASK);
g_assert(dev->msix_table != NULL);
g_assert(dev->msix_pba != NULL);
dev->msix_enabled = true;
}
void qpci_msix_disable(QPCIDevice *dev)
{
uint8_t addr;
uint16_t val;
g_assert(dev->msix_enabled);
addr = qpci_find_capability(dev, PCI_CAP_ID_MSIX);
g_assert_cmphex(addr, !=, 0);
val = qpci_config_readw(dev, addr + PCI_MSIX_FLAGS);
qpci_config_writew(dev, addr + PCI_MSIX_FLAGS,
val & ~PCI_MSIX_FLAGS_ENABLE);
qpci_iounmap(dev, dev->msix_table);
qpci_iounmap(dev, dev->msix_pba);
dev->msix_enabled = 0;
dev->msix_table = NULL;
dev->msix_pba = NULL;
}
bool qpci_msix_pending(QPCIDevice *dev, uint16_t entry)
{
uint32_t pba_entry;
uint8_t bit_n = entry % 32;
void *addr = dev->msix_pba + (entry / 32) * PCI_MSIX_ENTRY_SIZE / 4;
g_assert(dev->msix_enabled);
pba_entry = qpci_io_readl(dev, addr);
qpci_io_writel(dev, addr, pba_entry & ~(1 << bit_n));
return (pba_entry & (1 << bit_n)) != 0;
}
bool qpci_msix_masked(QPCIDevice *dev, uint16_t entry)
{
uint8_t addr;
uint16_t val;
void *vector_addr = dev->msix_table + (entry * PCI_MSIX_ENTRY_SIZE);
g_assert(dev->msix_enabled);
addr = qpci_find_capability(dev, PCI_CAP_ID_MSIX);
g_assert_cmphex(addr, !=, 0);
val = qpci_config_readw(dev, addr + PCI_MSIX_FLAGS);
if (val & PCI_MSIX_FLAGS_MASKALL) {
return true;
} else {
return (qpci_io_readl(dev, vector_addr + PCI_MSIX_ENTRY_VECTOR_CTRL)
& PCI_MSIX_ENTRY_CTRL_MASKBIT) != 0;
}
}
uint16_t qpci_msix_table_size(QPCIDevice *dev)
{
uint8_t addr;
uint16_t control;
addr = qpci_find_capability(dev, PCI_CAP_ID_MSIX);
g_assert_cmphex(addr, !=, 0);
control = qpci_config_readw(dev, addr + PCI_MSIX_FLAGS);
return (control & PCI_MSIX_FLAGS_QSIZE) + 1;
}
uint8_t qpci_config_readb(QPCIDevice *dev, uint8_t offset)
{
return dev->bus->config_readb(dev->bus, dev->devfn, offset);
}
uint16_t qpci_config_readw(QPCIDevice *dev, uint8_t offset)
{
return dev->bus->config_readw(dev->bus, dev->devfn, offset);
}
uint32_t qpci_config_readl(QPCIDevice *dev, uint8_t offset)
{
return dev->bus->config_readl(dev->bus, dev->devfn, offset);
}
void qpci_config_writeb(QPCIDevice *dev, uint8_t offset, uint8_t value)
{
dev->bus->config_writeb(dev->bus, dev->devfn, offset, value);
}
void qpci_config_writew(QPCIDevice *dev, uint8_t offset, uint16_t value)
{
dev->bus->config_writew(dev->bus, dev->devfn, offset, value);
}
void qpci_config_writel(QPCIDevice *dev, uint8_t offset, uint32_t value)
{
dev->bus->config_writel(dev->bus, dev->devfn, offset, value);
}
uint8_t qpci_io_readb(QPCIDevice *dev, void *data)
{
uintptr_t addr = (uintptr_t)data;
if (addr < QPCI_PIO_LIMIT) {
return dev->bus->pio_readb(dev->bus, addr);
} else {
return dev->bus->mmio_readb(dev->bus, addr);
}
}
uint16_t qpci_io_readw(QPCIDevice *dev, void *data)
{
uintptr_t addr = (uintptr_t)data;
if (addr < QPCI_PIO_LIMIT) {
return dev->bus->pio_readw(dev->bus, addr);
} else {
return dev->bus->mmio_readw(dev->bus, addr);
}
}
uint32_t qpci_io_readl(QPCIDevice *dev, void *data)
{
uintptr_t addr = (uintptr_t)data;
if (addr < QPCI_PIO_LIMIT) {
return dev->bus->pio_readl(dev->bus, addr);
} else {
return dev->bus->mmio_readl(dev->bus, addr);
}
}
void qpci_io_writeb(QPCIDevice *dev, void *data, uint8_t value)
{
uintptr_t addr = (uintptr_t)data;
if (addr < QPCI_PIO_LIMIT) {
dev->bus->pio_writeb(dev->bus, addr, value);
} else {
dev->bus->mmio_writeb(dev->bus, addr, value);
}
}
void qpci_io_writew(QPCIDevice *dev, void *data, uint16_t value)
{
uintptr_t addr = (uintptr_t)data;
if (addr < QPCI_PIO_LIMIT) {
dev->bus->pio_writew(dev->bus, addr, value);
} else {
dev->bus->mmio_writew(dev->bus, addr, value);
}
}
void qpci_io_writel(QPCIDevice *dev, void *data, uint32_t value)
{
uintptr_t addr = (uintptr_t)data;
if (addr < QPCI_PIO_LIMIT) {
dev->bus->pio_writel(dev->bus, addr, value);
} else {
dev->bus->mmio_writel(dev->bus, addr, value);
}
}
void *qpci_iomap(QPCIDevice *dev, int barno, uint64_t *sizeptr)
{
QPCIBus *bus = dev->bus;
static const int bar_reg_map[] = {
PCI_BASE_ADDRESS_0, PCI_BASE_ADDRESS_1, PCI_BASE_ADDRESS_2,
PCI_BASE_ADDRESS_3, PCI_BASE_ADDRESS_4, PCI_BASE_ADDRESS_5,
};
int bar_reg;
uint32_t addr, size;
uint32_t io_type;
uint64_t loc;
g_assert(barno >= 0 && barno <= 5);
bar_reg = bar_reg_map[barno];
qpci_config_writel(dev, bar_reg, 0xFFFFFFFF);
addr = qpci_config_readl(dev, bar_reg);
io_type = addr & PCI_BASE_ADDRESS_SPACE;
if (io_type == PCI_BASE_ADDRESS_SPACE_IO) {
addr &= PCI_BASE_ADDRESS_IO_MASK;
} else {
addr &= PCI_BASE_ADDRESS_MEM_MASK;
}
g_assert(addr); /* Must have *some* size bits */
size = 1U << ctz32(addr);
if (sizeptr) {
*sizeptr = size;
}
if (io_type == PCI_BASE_ADDRESS_SPACE_IO) {
loc = QEMU_ALIGN_UP(bus->pio_alloc_ptr, size);
g_assert(loc >= bus->pio_alloc_ptr);
g_assert(loc + size <= QPCI_PIO_LIMIT); /* Keep PIO below 64kiB */
bus->pio_alloc_ptr = loc + size;
qpci_config_writel(dev, bar_reg, loc | PCI_BASE_ADDRESS_SPACE_IO);
} else {
loc = QEMU_ALIGN_UP(bus->mmio_alloc_ptr, size);
/* Check for space */
g_assert(loc >= bus->mmio_alloc_ptr);
g_assert(loc + size <= bus->mmio_limit);
bus->mmio_alloc_ptr = loc + size;
qpci_config_writel(dev, bar_reg, loc);
}
return (void *)(uintptr_t)loc;
}
void qpci_iounmap(QPCIDevice *dev, void *data)
{
/* FIXME */
}
void qpci_plug_device_test(const char *driver, const char *id,
uint8_t slot, const char *opts)
{
QDict *response;
char *cmd;
cmd = g_strdup_printf("{'execute': 'device_add',"
" 'arguments': {"
" 'driver': '%s',"
" 'addr': '%d',"
" %s%s"
" 'id': '%s'"
"}}", driver, slot,
opts ? opts : "", opts ? "," : "",
id);
response = qmp(cmd);
g_free(cmd);
g_assert(response);
g_assert(!qdict_haskey(response, "error"));
QDECREF(response);
}