mirror of
				https://github.com/qemu/qemu.git
				synced 2025-10-31 04:06:46 +00:00 
			
		
		
		
	 87684b4c40
			
		
	
	
		87684b4c40
		
	
	
	
	
		
			
			The spapr-vlan device in QEMU has always presented it's MAC address in the device tree as an 8 byte value, even though PAPR requires it to be 6 bytes. This is because, at the time, AIX required the value to be 8 bytes. However, modern versions of AIX support the (correct) 6 byte value so they no longer require the workaround. It would be neatest to always provide a 6 byte value but that would cause a problem with old Linux kernel ibmveth drivers, so the old 8 byte value is still presented when necessary. Since commit 13f85203e (3.10, May 2013) the driver has been able to handle 6 or 8 byte addresses so versions after that don't need to be considered specially. Drivers from kernels before that can also handle either type of address, but not always: * If the first byte's lowest bits are 10, the address must be 6 bytes. * Otherwise, the address must be 8 bytes. (The two bits in question are significant in a MAC address: they indicate a locally-administered unicast address.) So to maintain compatibility the old 8 byte value is presented when the lowest two bits of the first byte are not 10. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
		
			
				
	
	
		
			886 lines
		
	
	
		
			27 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			886 lines
		
	
	
		
			27 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * QEMU PowerPC pSeries Logical Partition (aka sPAPR) hardware System Emulator
 | |
|  *
 | |
|  * PAPR Inter-VM Logical Lan, aka ibmveth
 | |
|  *
 | |
|  * Copyright (c) 2010,2011 David Gibson, IBM Corporation.
 | |
|  *
 | |
|  * Permission is hereby granted, free of charge, to any person obtaining a copy
 | |
|  * of this software and associated documentation files (the "Software"), to deal
 | |
|  * in the Software without restriction, including without limitation the rights
 | |
|  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 | |
|  * copies of the Software, and to permit persons to whom the Software is
 | |
|  * furnished to do so, subject to the following conditions:
 | |
|  *
 | |
|  * The above copyright notice and this permission notice shall be included in
 | |
|  * all copies or substantial portions of the Software.
 | |
|  *
 | |
|  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 | |
|  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 | |
|  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
 | |
|  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 | |
|  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 | |
|  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 | |
|  * THE SOFTWARE.
 | |
|  *
 | |
|  */
 | |
| #include "qemu/osdep.h"
 | |
| #include "qemu-common.h"
 | |
| #include "cpu.h"
 | |
| #include "hw/hw.h"
 | |
| #include "qemu/log.h"
 | |
| #include "net/net.h"
 | |
| #include "hw/qdev.h"
 | |
| #include "hw/ppc/spapr.h"
 | |
| #include "hw/ppc/spapr_vio.h"
 | |
| #include "sysemu/sysemu.h"
 | |
| #include "trace.h"
 | |
| 
 | |
| #include <libfdt.h>
 | |
| 
 | |
| #define ETH_ALEN        6
 | |
| #define MAX_PACKET_SIZE 65536
 | |
| 
 | |
| /* Compatibility flags for migration */
 | |
| #define SPAPRVLAN_FLAG_RX_BUF_POOLS_BIT  0
 | |
| #define SPAPRVLAN_FLAG_RX_BUF_POOLS      (1 << SPAPRVLAN_FLAG_RX_BUF_POOLS_BIT)
 | |
| 
 | |
| /*
 | |
|  * Virtual LAN device
 | |
|  */
 | |
| 
 | |
| typedef uint64_t vlan_bd_t;
 | |
| 
 | |
| #define VLAN_BD_VALID        0x8000000000000000ULL
 | |
| #define VLAN_BD_TOGGLE       0x4000000000000000ULL
 | |
| #define VLAN_BD_NO_CSUM      0x0200000000000000ULL
 | |
| #define VLAN_BD_CSUM_GOOD    0x0100000000000000ULL
 | |
| #define VLAN_BD_LEN_MASK     0x00ffffff00000000ULL
 | |
| #define VLAN_BD_LEN(bd)      (((bd) & VLAN_BD_LEN_MASK) >> 32)
 | |
| #define VLAN_BD_ADDR_MASK    0x00000000ffffffffULL
 | |
| #define VLAN_BD_ADDR(bd)     ((bd) & VLAN_BD_ADDR_MASK)
 | |
| 
 | |
| #define VLAN_VALID_BD(addr, len) (VLAN_BD_VALID | \
 | |
|                                   (((len) << 32) & VLAN_BD_LEN_MASK) |  \
 | |
|                                   (addr & VLAN_BD_ADDR_MASK))
 | |
| 
 | |
| #define VLAN_RXQC_TOGGLE     0x80
 | |
| #define VLAN_RXQC_VALID      0x40
 | |
| #define VLAN_RXQC_NO_CSUM    0x02
 | |
| #define VLAN_RXQC_CSUM_GOOD  0x01
 | |
| 
 | |
| #define VLAN_RQ_ALIGNMENT    16
 | |
| #define VLAN_RXQ_BD_OFF      0
 | |
| #define VLAN_FILTER_BD_OFF   8
 | |
| #define VLAN_RX_BDS_OFF      16
 | |
| /*
 | |
|  * The final 8 bytes of the buffer list is a counter of frames dropped
 | |
|  * because there was not a buffer in the buffer list capable of holding
 | |
|  * the frame. We must avoid it, or the operating system will report garbage
 | |
|  * for this statistic.
 | |
|  */
 | |
| #define VLAN_RX_BDS_LEN      (SPAPR_TCE_PAGE_SIZE - VLAN_RX_BDS_OFF - 8)
 | |
| #define VLAN_MAX_BUFS        (VLAN_RX_BDS_LEN / 8)
 | |
| 
 | |
| #define TYPE_VIO_SPAPR_VLAN_DEVICE "spapr-vlan"
 | |
| #define VIO_SPAPR_VLAN_DEVICE(obj) \
 | |
|      OBJECT_CHECK(VIOsPAPRVLANDevice, (obj), TYPE_VIO_SPAPR_VLAN_DEVICE)
 | |
| 
 | |
| #define RX_POOL_MAX_BDS 4096
 | |
| #define RX_MAX_POOLS 5
 | |
| 
 | |
| typedef struct {
 | |
|     int32_t bufsize;
 | |
|     int32_t count;
 | |
|     vlan_bd_t bds[RX_POOL_MAX_BDS];
 | |
| } RxBufPool;
 | |
| 
 | |
| typedef struct VIOsPAPRVLANDevice {
 | |
|     VIOsPAPRDevice sdev;
 | |
|     NICConf nicconf;
 | |
|     NICState *nic;
 | |
|     MACAddr perm_mac;
 | |
|     bool isopen;
 | |
|     hwaddr buf_list;
 | |
|     uint32_t add_buf_ptr, use_buf_ptr, rx_bufs;
 | |
|     hwaddr rxq_ptr;
 | |
|     QEMUTimer *rxp_timer;
 | |
|     uint32_t compat_flags;             /* Compatibility flags for migration */
 | |
|     RxBufPool *rx_pool[RX_MAX_POOLS];  /* Receive buffer descriptor pools */
 | |
| } VIOsPAPRVLANDevice;
 | |
| 
 | |
| static int spapr_vlan_can_receive(NetClientState *nc)
 | |
| {
 | |
|     VIOsPAPRVLANDevice *dev = qemu_get_nic_opaque(nc);
 | |
| 
 | |
|     return (dev->isopen && dev->rx_bufs > 0);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * The last 8 bytes of the receive buffer list page (that has been
 | |
|  * supplied by the guest with the H_REGISTER_LOGICAL_LAN call) contain
 | |
|  * a counter for frames that have been dropped because there was no
 | |
|  * suitable receive buffer available. This function is used to increase
 | |
|  * this counter by one.
 | |
|  */
 | |
| static void spapr_vlan_record_dropped_rx_frame(VIOsPAPRVLANDevice *dev)
 | |
| {
 | |
|     uint64_t cnt;
 | |
| 
 | |
|     cnt = vio_ldq(&dev->sdev, dev->buf_list + 4096 - 8);
 | |
|     vio_stq(&dev->sdev, dev->buf_list + 4096 - 8, cnt + 1);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * Get buffer descriptor from one of our receive buffer pools
 | |
|  */
 | |
| static vlan_bd_t spapr_vlan_get_rx_bd_from_pool(VIOsPAPRVLANDevice *dev,
 | |
|                                                 size_t size)
 | |
| {
 | |
|     vlan_bd_t bd;
 | |
|     int pool;
 | |
| 
 | |
|     for (pool = 0; pool < RX_MAX_POOLS; pool++) {
 | |
|         if (dev->rx_pool[pool]->count > 0 &&
 | |
|             dev->rx_pool[pool]->bufsize >= size + 8) {
 | |
|             break;
 | |
|         }
 | |
|     }
 | |
|     if (pool == RX_MAX_POOLS) {
 | |
|         /* Failed to find a suitable buffer */
 | |
|         return 0;
 | |
|     }
 | |
| 
 | |
| 
 | |
|     trace_spapr_vlan_get_rx_bd_from_pool_found(pool,
 | |
|                                                dev->rx_pool[pool]->count,
 | |
|                                                dev->rx_bufs);
 | |
| 
 | |
|     /* Remove the buffer from the pool */
 | |
|     dev->rx_pool[pool]->count--;
 | |
|     bd = dev->rx_pool[pool]->bds[dev->rx_pool[pool]->count];
 | |
|     dev->rx_pool[pool]->bds[dev->rx_pool[pool]->count] = 0;
 | |
| 
 | |
|     return bd;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * Get buffer descriptor from the receive buffer list page that has been
 | |
|  * supplied by the guest with the H_REGISTER_LOGICAL_LAN call
 | |
|  */
 | |
| static vlan_bd_t spapr_vlan_get_rx_bd_from_page(VIOsPAPRVLANDevice *dev,
 | |
|                                                 size_t size)
 | |
| {
 | |
|     int buf_ptr = dev->use_buf_ptr;
 | |
|     vlan_bd_t bd;
 | |
| 
 | |
|     do {
 | |
|         buf_ptr += 8;
 | |
|         if (buf_ptr >= VLAN_RX_BDS_LEN + VLAN_RX_BDS_OFF) {
 | |
|             buf_ptr = VLAN_RX_BDS_OFF;
 | |
|         }
 | |
| 
 | |
|         bd = vio_ldq(&dev->sdev, dev->buf_list + buf_ptr);
 | |
| 
 | |
|         trace_spapr_vlan_get_rx_bd_from_page(buf_ptr, (uint64_t)bd);
 | |
|     } while ((!(bd & VLAN_BD_VALID) || VLAN_BD_LEN(bd) < size + 8)
 | |
|              && buf_ptr != dev->use_buf_ptr);
 | |
| 
 | |
|     if (!(bd & VLAN_BD_VALID) || VLAN_BD_LEN(bd) < size + 8) {
 | |
|         /* Failed to find a suitable buffer */
 | |
|         return 0;
 | |
|     }
 | |
| 
 | |
|     /* Remove the buffer from the pool */
 | |
|     dev->use_buf_ptr = buf_ptr;
 | |
|     vio_stq(&dev->sdev, dev->buf_list + dev->use_buf_ptr, 0);
 | |
| 
 | |
|     trace_spapr_vlan_get_rx_bd_from_page_found(dev->use_buf_ptr, dev->rx_bufs);
 | |
| 
 | |
|     return bd;
 | |
| }
 | |
| 
 | |
| static ssize_t spapr_vlan_receive(NetClientState *nc, const uint8_t *buf,
 | |
|                                   size_t size)
 | |
| {
 | |
|     VIOsPAPRVLANDevice *dev = qemu_get_nic_opaque(nc);
 | |
|     VIOsPAPRDevice *sdev = VIO_SPAPR_DEVICE(dev);
 | |
|     vlan_bd_t rxq_bd = vio_ldq(sdev, dev->buf_list + VLAN_RXQ_BD_OFF);
 | |
|     vlan_bd_t bd;
 | |
|     uint64_t handle;
 | |
|     uint8_t control;
 | |
| 
 | |
|     trace_spapr_vlan_receive(sdev->qdev.id, dev->rx_bufs);
 | |
| 
 | |
|     if (!dev->isopen) {
 | |
|         return -1;
 | |
|     }
 | |
| 
 | |
|     if (!dev->rx_bufs) {
 | |
|         spapr_vlan_record_dropped_rx_frame(dev);
 | |
|         return 0;
 | |
|     }
 | |
| 
 | |
|     if (dev->compat_flags & SPAPRVLAN_FLAG_RX_BUF_POOLS) {
 | |
|         bd = spapr_vlan_get_rx_bd_from_pool(dev, size);
 | |
|     } else {
 | |
|         bd = spapr_vlan_get_rx_bd_from_page(dev, size);
 | |
|     }
 | |
|     if (!bd) {
 | |
|         spapr_vlan_record_dropped_rx_frame(dev);
 | |
|         return 0;
 | |
|     }
 | |
| 
 | |
|     dev->rx_bufs--;
 | |
| 
 | |
|     /* Transfer the packet data */
 | |
|     if (spapr_vio_dma_write(sdev, VLAN_BD_ADDR(bd) + 8, buf, size) < 0) {
 | |
|         return -1;
 | |
|     }
 | |
| 
 | |
|     trace_spapr_vlan_receive_dma_completed();
 | |
| 
 | |
|     /* Update the receive queue */
 | |
|     control = VLAN_RXQC_TOGGLE | VLAN_RXQC_VALID;
 | |
|     if (rxq_bd & VLAN_BD_TOGGLE) {
 | |
|         control ^= VLAN_RXQC_TOGGLE;
 | |
|     }
 | |
| 
 | |
|     handle = vio_ldq(sdev, VLAN_BD_ADDR(bd));
 | |
|     vio_stq(sdev, VLAN_BD_ADDR(rxq_bd) + dev->rxq_ptr + 8, handle);
 | |
|     vio_stl(sdev, VLAN_BD_ADDR(rxq_bd) + dev->rxq_ptr + 4, size);
 | |
|     vio_sth(sdev, VLAN_BD_ADDR(rxq_bd) + dev->rxq_ptr + 2, 8);
 | |
|     vio_stb(sdev, VLAN_BD_ADDR(rxq_bd) + dev->rxq_ptr, control);
 | |
| 
 | |
|     trace_spapr_vlan_receive_wrote(dev->rxq_ptr,
 | |
|                                    vio_ldq(sdev, VLAN_BD_ADDR(rxq_bd) +
 | |
|                                                  dev->rxq_ptr),
 | |
|                                    vio_ldq(sdev, VLAN_BD_ADDR(rxq_bd) +
 | |
|                                                  dev->rxq_ptr + 8));
 | |
| 
 | |
|     dev->rxq_ptr += 16;
 | |
|     if (dev->rxq_ptr >= VLAN_BD_LEN(rxq_bd)) {
 | |
|         dev->rxq_ptr = 0;
 | |
|         vio_stq(sdev, dev->buf_list + VLAN_RXQ_BD_OFF, rxq_bd ^ VLAN_BD_TOGGLE);
 | |
|     }
 | |
| 
 | |
|     if (sdev->signal_state & 1) {
 | |
|         qemu_irq_pulse(spapr_vio_qirq(sdev));
 | |
|     }
 | |
| 
 | |
|     return size;
 | |
| }
 | |
| 
 | |
| static NetClientInfo net_spapr_vlan_info = {
 | |
|     .type = NET_CLIENT_DRIVER_NIC,
 | |
|     .size = sizeof(NICState),
 | |
|     .can_receive = spapr_vlan_can_receive,
 | |
|     .receive = spapr_vlan_receive,
 | |
| };
 | |
| 
 | |
| static void spapr_vlan_flush_rx_queue(void *opaque)
 | |
| {
 | |
|     VIOsPAPRVLANDevice *dev = opaque;
 | |
| 
 | |
|     qemu_flush_queued_packets(qemu_get_queue(dev->nic));
 | |
| }
 | |
| 
 | |
| static void spapr_vlan_reset_rx_pool(RxBufPool *rxp)
 | |
| {
 | |
|     /*
 | |
|      * Use INT_MAX as bufsize so that unused buffers are moved to the end
 | |
|      * of the list during the qsort in spapr_vlan_add_rxbuf_to_pool() later.
 | |
|      */
 | |
|     rxp->bufsize = INT_MAX;
 | |
|     rxp->count = 0;
 | |
|     memset(rxp->bds, 0, sizeof(rxp->bds));
 | |
| }
 | |
| 
 | |
| static void spapr_vlan_reset(VIOsPAPRDevice *sdev)
 | |
| {
 | |
|     VIOsPAPRVLANDevice *dev = VIO_SPAPR_VLAN_DEVICE(sdev);
 | |
|     int i;
 | |
| 
 | |
|     dev->buf_list = 0;
 | |
|     dev->rx_bufs = 0;
 | |
|     dev->isopen = 0;
 | |
| 
 | |
|     if (dev->compat_flags & SPAPRVLAN_FLAG_RX_BUF_POOLS) {
 | |
|         for (i = 0; i < RX_MAX_POOLS; i++) {
 | |
|             spapr_vlan_reset_rx_pool(dev->rx_pool[i]);
 | |
|         }
 | |
|     }
 | |
| 
 | |
|     memcpy(&dev->nicconf.macaddr.a, &dev->perm_mac.a,
 | |
|            sizeof(dev->nicconf.macaddr.a));
 | |
|     qemu_format_nic_info_str(qemu_get_queue(dev->nic), dev->nicconf.macaddr.a);
 | |
| }
 | |
| 
 | |
| static void spapr_vlan_realize(VIOsPAPRDevice *sdev, Error **errp)
 | |
| {
 | |
|     VIOsPAPRVLANDevice *dev = VIO_SPAPR_VLAN_DEVICE(sdev);
 | |
| 
 | |
|     qemu_macaddr_default_if_unset(&dev->nicconf.macaddr);
 | |
| 
 | |
|     memcpy(&dev->perm_mac.a, &dev->nicconf.macaddr.a, sizeof(dev->perm_mac.a));
 | |
| 
 | |
|     dev->nic = qemu_new_nic(&net_spapr_vlan_info, &dev->nicconf,
 | |
|                             object_get_typename(OBJECT(sdev)), sdev->qdev.id, dev);
 | |
|     qemu_format_nic_info_str(qemu_get_queue(dev->nic), dev->nicconf.macaddr.a);
 | |
| 
 | |
|     dev->rxp_timer = timer_new_us(QEMU_CLOCK_VIRTUAL, spapr_vlan_flush_rx_queue,
 | |
|                                   dev);
 | |
| }
 | |
| 
 | |
| static void spapr_vlan_instance_init(Object *obj)
 | |
| {
 | |
|     VIOsPAPRVLANDevice *dev = VIO_SPAPR_VLAN_DEVICE(obj);
 | |
|     int i;
 | |
| 
 | |
|     device_add_bootindex_property(obj, &dev->nicconf.bootindex,
 | |
|                                   "bootindex", "",
 | |
|                                   DEVICE(dev), NULL);
 | |
| 
 | |
|     if (dev->compat_flags & SPAPRVLAN_FLAG_RX_BUF_POOLS) {
 | |
|         for (i = 0; i < RX_MAX_POOLS; i++) {
 | |
|             dev->rx_pool[i] = g_new(RxBufPool, 1);
 | |
|             spapr_vlan_reset_rx_pool(dev->rx_pool[i]);
 | |
|         }
 | |
|     }
 | |
| }
 | |
| 
 | |
| static void spapr_vlan_instance_finalize(Object *obj)
 | |
| {
 | |
|     VIOsPAPRVLANDevice *dev = VIO_SPAPR_VLAN_DEVICE(obj);
 | |
|     int i;
 | |
| 
 | |
|     if (dev->compat_flags & SPAPRVLAN_FLAG_RX_BUF_POOLS) {
 | |
|         for (i = 0; i < RX_MAX_POOLS; i++) {
 | |
|             g_free(dev->rx_pool[i]);
 | |
|             dev->rx_pool[i] = NULL;
 | |
|         }
 | |
|     }
 | |
| 
 | |
|     if (dev->rxp_timer) {
 | |
|         timer_del(dev->rxp_timer);
 | |
|         timer_free(dev->rxp_timer);
 | |
|     }
 | |
| }
 | |
| 
 | |
| void spapr_vlan_create(VIOsPAPRBus *bus, NICInfo *nd)
 | |
| {
 | |
|     DeviceState *dev;
 | |
| 
 | |
|     dev = qdev_create(&bus->bus, "spapr-vlan");
 | |
| 
 | |
|     qdev_set_nic_properties(dev, nd);
 | |
| 
 | |
|     qdev_init_nofail(dev);
 | |
| }
 | |
| 
 | |
| static int spapr_vlan_devnode(VIOsPAPRDevice *dev, void *fdt, int node_off)
 | |
| {
 | |
|     VIOsPAPRVLANDevice *vdev = VIO_SPAPR_VLAN_DEVICE(dev);
 | |
|     uint8_t padded_mac[8] = {0, 0};
 | |
|     int ret;
 | |
| 
 | |
|     /* Some old phyp versions give the mac address in an 8-byte
 | |
|      * property.  The kernel driver (before 3.10) has an insane workaround;
 | |
|      * rather than doing the obvious thing and checking the property
 | |
|      * length, it checks whether the first byte has 0b10 in the low
 | |
|      * bits.  If a correct 6-byte property has a different first byte
 | |
|      * the kernel will get the wrong mac address, overrunning its
 | |
|      * buffer in the process (read only, thank goodness).
 | |
|      *
 | |
|      * Here we return a 6-byte address unless that would break a pre-3.10
 | |
|      * driver.  In that case we return a padded 8-byte address to allow the old
 | |
|      * workaround to succeed. */
 | |
|     if ((vdev->nicconf.macaddr.a[0] & 0x3) == 0x2) {
 | |
|         ret = fdt_setprop(fdt, node_off, "local-mac-address",
 | |
|                           &vdev->nicconf.macaddr, ETH_ALEN);
 | |
|     } else {
 | |
|         memcpy(&padded_mac[2], &vdev->nicconf.macaddr, ETH_ALEN);
 | |
|         ret = fdt_setprop(fdt, node_off, "local-mac-address",
 | |
|                           padded_mac, sizeof(padded_mac));
 | |
|     }
 | |
|     if (ret < 0) {
 | |
|         return ret;
 | |
|     }
 | |
| 
 | |
|     ret = fdt_setprop_cell(fdt, node_off, "ibm,mac-address-filters", 0);
 | |
|     if (ret < 0) {
 | |
|         return ret;
 | |
|     }
 | |
| 
 | |
|     return 0;
 | |
| }
 | |
| 
 | |
| static int check_bd(VIOsPAPRVLANDevice *dev, vlan_bd_t bd,
 | |
|                     target_ulong alignment)
 | |
| {
 | |
|     if ((VLAN_BD_ADDR(bd) % alignment)
 | |
|         || (VLAN_BD_LEN(bd) % alignment)) {
 | |
|         return -1;
 | |
|     }
 | |
| 
 | |
|     if (!spapr_vio_dma_valid(&dev->sdev, VLAN_BD_ADDR(bd),
 | |
|                              VLAN_BD_LEN(bd), DMA_DIRECTION_FROM_DEVICE)
 | |
|         || !spapr_vio_dma_valid(&dev->sdev, VLAN_BD_ADDR(bd),
 | |
|                                 VLAN_BD_LEN(bd), DMA_DIRECTION_TO_DEVICE)) {
 | |
|         return -1;
 | |
|     }
 | |
| 
 | |
|     return 0;
 | |
| }
 | |
| 
 | |
| static target_ulong h_register_logical_lan(PowerPCCPU *cpu,
 | |
|                                            sPAPRMachineState *spapr,
 | |
|                                            target_ulong opcode,
 | |
|                                            target_ulong *args)
 | |
| {
 | |
|     target_ulong reg = args[0];
 | |
|     target_ulong buf_list = args[1];
 | |
|     target_ulong rec_queue = args[2];
 | |
|     target_ulong filter_list = args[3];
 | |
|     VIOsPAPRDevice *sdev = spapr_vio_find_by_reg(spapr->vio_bus, reg);
 | |
|     VIOsPAPRVLANDevice *dev = VIO_SPAPR_VLAN_DEVICE(sdev);
 | |
|     vlan_bd_t filter_list_bd;
 | |
| 
 | |
|     if (!dev) {
 | |
|         return H_PARAMETER;
 | |
|     }
 | |
| 
 | |
|     if (dev->isopen) {
 | |
|         hcall_dprintf("H_REGISTER_LOGICAL_LAN called twice without "
 | |
|                       "H_FREE_LOGICAL_LAN\n");
 | |
|         return H_RESOURCE;
 | |
|     }
 | |
| 
 | |
|     if (check_bd(dev, VLAN_VALID_BD(buf_list, SPAPR_TCE_PAGE_SIZE),
 | |
|                  SPAPR_TCE_PAGE_SIZE) < 0) {
 | |
|         hcall_dprintf("Bad buf_list 0x" TARGET_FMT_lx "\n", buf_list);
 | |
|         return H_PARAMETER;
 | |
|     }
 | |
| 
 | |
|     filter_list_bd = VLAN_VALID_BD(filter_list, SPAPR_TCE_PAGE_SIZE);
 | |
|     if (check_bd(dev, filter_list_bd, SPAPR_TCE_PAGE_SIZE) < 0) {
 | |
|         hcall_dprintf("Bad filter_list 0x" TARGET_FMT_lx "\n", filter_list);
 | |
|         return H_PARAMETER;
 | |
|     }
 | |
| 
 | |
|     if (!(rec_queue & VLAN_BD_VALID)
 | |
|         || (check_bd(dev, rec_queue, VLAN_RQ_ALIGNMENT) < 0)) {
 | |
|         hcall_dprintf("Bad receive queue\n");
 | |
|         return H_PARAMETER;
 | |
|     }
 | |
| 
 | |
|     dev->buf_list = buf_list;
 | |
|     sdev->signal_state = 0;
 | |
| 
 | |
|     rec_queue &= ~VLAN_BD_TOGGLE;
 | |
| 
 | |
|     /* Initialize the buffer list */
 | |
|     vio_stq(sdev, buf_list, rec_queue);
 | |
|     vio_stq(sdev, buf_list + 8, filter_list_bd);
 | |
|     spapr_vio_dma_set(sdev, buf_list + VLAN_RX_BDS_OFF, 0,
 | |
|                       SPAPR_TCE_PAGE_SIZE - VLAN_RX_BDS_OFF);
 | |
|     dev->add_buf_ptr = VLAN_RX_BDS_OFF - 8;
 | |
|     dev->use_buf_ptr = VLAN_RX_BDS_OFF - 8;
 | |
|     dev->rx_bufs = 0;
 | |
|     dev->rxq_ptr = 0;
 | |
| 
 | |
|     /* Initialize the receive queue */
 | |
|     spapr_vio_dma_set(sdev, VLAN_BD_ADDR(rec_queue), 0, VLAN_BD_LEN(rec_queue));
 | |
| 
 | |
|     dev->isopen = 1;
 | |
|     qemu_flush_queued_packets(qemu_get_queue(dev->nic));
 | |
| 
 | |
|     return H_SUCCESS;
 | |
| }
 | |
| 
 | |
| 
 | |
| static target_ulong h_free_logical_lan(PowerPCCPU *cpu,
 | |
|                                        sPAPRMachineState *spapr,
 | |
|                                        target_ulong opcode, target_ulong *args)
 | |
| {
 | |
|     target_ulong reg = args[0];
 | |
|     VIOsPAPRDevice *sdev = spapr_vio_find_by_reg(spapr->vio_bus, reg);
 | |
|     VIOsPAPRVLANDevice *dev = VIO_SPAPR_VLAN_DEVICE(sdev);
 | |
| 
 | |
|     if (!dev) {
 | |
|         return H_PARAMETER;
 | |
|     }
 | |
| 
 | |
|     if (!dev->isopen) {
 | |
|         hcall_dprintf("H_FREE_LOGICAL_LAN called without "
 | |
|                       "H_REGISTER_LOGICAL_LAN\n");
 | |
|         return H_RESOURCE;
 | |
|     }
 | |
| 
 | |
|     spapr_vlan_reset(sdev);
 | |
|     return H_SUCCESS;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * Used for qsort, this function compares two RxBufPools by size.
 | |
|  */
 | |
| static int rx_pool_size_compare(const void *p1, const void *p2)
 | |
| {
 | |
|     const RxBufPool *pool1 = *(RxBufPool **)p1;
 | |
|     const RxBufPool *pool2 = *(RxBufPool **)p2;
 | |
| 
 | |
|     if (pool1->bufsize < pool2->bufsize) {
 | |
|         return -1;
 | |
|     }
 | |
|     return pool1->bufsize > pool2->bufsize;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * Search for a matching buffer pool with exact matching size,
 | |
|  * or return -1 if no matching pool has been found.
 | |
|  */
 | |
| static int spapr_vlan_get_rx_pool_id(VIOsPAPRVLANDevice *dev, int size)
 | |
| {
 | |
|     int pool;
 | |
| 
 | |
|     for (pool = 0; pool < RX_MAX_POOLS; pool++) {
 | |
|         if (dev->rx_pool[pool]->bufsize == size) {
 | |
|             return pool;
 | |
|         }
 | |
|     }
 | |
| 
 | |
|     return -1;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * Enqueuing receive buffer by adding it to one of our receive buffer pools
 | |
|  */
 | |
| static target_long spapr_vlan_add_rxbuf_to_pool(VIOsPAPRVLANDevice *dev,
 | |
|                                                 target_ulong buf)
 | |
| {
 | |
|     int size = VLAN_BD_LEN(buf);
 | |
|     int pool;
 | |
| 
 | |
|     pool = spapr_vlan_get_rx_pool_id(dev, size);
 | |
|     if (pool < 0) {
 | |
|         /*
 | |
|          * No matching pool found? Try to use a new one. If the guest used all
 | |
|          * pools before, but changed the size of one pool in the meantime, we might
 | |
|          * need to recycle that pool here (if it's empty already). Thus scan
 | |
|          * all buffer pools now, starting with the last (likely empty) one.
 | |
|          */
 | |
|         for (pool = RX_MAX_POOLS - 1; pool >= 0 ; pool--) {
 | |
|             if (dev->rx_pool[pool]->count == 0) {
 | |
|                 dev->rx_pool[pool]->bufsize = size;
 | |
|                 /*
 | |
|                  * Sort pools by size so that spapr_vlan_receive()
 | |
|                  * can later find the smallest buffer pool easily.
 | |
|                  */
 | |
|                 qsort(dev->rx_pool, RX_MAX_POOLS, sizeof(dev->rx_pool[0]),
 | |
|                       rx_pool_size_compare);
 | |
|                 pool = spapr_vlan_get_rx_pool_id(dev, size);
 | |
|                 trace_spapr_vlan_add_rxbuf_to_pool_create(pool,
 | |
|                                                           VLAN_BD_LEN(buf));
 | |
|                 break;
 | |
|             }
 | |
|         }
 | |
|     }
 | |
|     /* Still no usable pool? Give up */
 | |
|     if (pool < 0 || dev->rx_pool[pool]->count >= RX_POOL_MAX_BDS) {
 | |
|         return H_RESOURCE;
 | |
|     }
 | |
| 
 | |
|     trace_spapr_vlan_add_rxbuf_to_pool(pool, VLAN_BD_LEN(buf),
 | |
|                                        dev->rx_pool[pool]->count);
 | |
| 
 | |
|     dev->rx_pool[pool]->bds[dev->rx_pool[pool]->count++] = buf;
 | |
| 
 | |
|     return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * This is the old way of enqueuing receive buffers: Add it to the rx queue
 | |
|  * page that has been supplied by the guest (which is quite limited in size).
 | |
|  */
 | |
| static target_long spapr_vlan_add_rxbuf_to_page(VIOsPAPRVLANDevice *dev,
 | |
|                                                 target_ulong buf)
 | |
| {
 | |
|     vlan_bd_t bd;
 | |
| 
 | |
|     if (dev->rx_bufs >= VLAN_MAX_BUFS) {
 | |
|         return H_RESOURCE;
 | |
|     }
 | |
| 
 | |
|     do {
 | |
|         dev->add_buf_ptr += 8;
 | |
|         if (dev->add_buf_ptr >= VLAN_RX_BDS_LEN + VLAN_RX_BDS_OFF) {
 | |
|             dev->add_buf_ptr = VLAN_RX_BDS_OFF;
 | |
|         }
 | |
| 
 | |
|         bd = vio_ldq(&dev->sdev, dev->buf_list + dev->add_buf_ptr);
 | |
|     } while (bd & VLAN_BD_VALID);
 | |
| 
 | |
|     vio_stq(&dev->sdev, dev->buf_list + dev->add_buf_ptr, buf);
 | |
| 
 | |
|     trace_spapr_vlan_add_rxbuf_to_page(dev->add_buf_ptr, dev->rx_bufs, buf);
 | |
| 
 | |
|     return 0;
 | |
| }
 | |
| 
 | |
| static target_ulong h_add_logical_lan_buffer(PowerPCCPU *cpu,
 | |
|                                              sPAPRMachineState *spapr,
 | |
|                                              target_ulong opcode,
 | |
|                                              target_ulong *args)
 | |
| {
 | |
|     target_ulong reg = args[0];
 | |
|     target_ulong buf = args[1];
 | |
|     VIOsPAPRDevice *sdev = spapr_vio_find_by_reg(spapr->vio_bus, reg);
 | |
|     VIOsPAPRVLANDevice *dev = VIO_SPAPR_VLAN_DEVICE(sdev);
 | |
|     target_long ret;
 | |
| 
 | |
|     trace_spapr_vlan_h_add_logical_lan_buffer(reg, buf);
 | |
| 
 | |
|     if (!sdev) {
 | |
|         hcall_dprintf("Bad device\n");
 | |
|         return H_PARAMETER;
 | |
|     }
 | |
| 
 | |
|     if ((check_bd(dev, buf, 4) < 0)
 | |
|         || (VLAN_BD_LEN(buf) < 16)) {
 | |
|         hcall_dprintf("Bad buffer enqueued\n");
 | |
|         return H_PARAMETER;
 | |
|     }
 | |
| 
 | |
|     if (!dev->isopen) {
 | |
|         return H_RESOURCE;
 | |
|     }
 | |
| 
 | |
|     if (dev->compat_flags & SPAPRVLAN_FLAG_RX_BUF_POOLS) {
 | |
|         ret = spapr_vlan_add_rxbuf_to_pool(dev, buf);
 | |
|     } else {
 | |
|         ret = spapr_vlan_add_rxbuf_to_page(dev, buf);
 | |
|     }
 | |
|     if (ret) {
 | |
|         return ret;
 | |
|     }
 | |
| 
 | |
|     dev->rx_bufs++;
 | |
| 
 | |
|     /*
 | |
|      * Give guest some more time to add additional RX buffers before we
 | |
|      * flush the receive queue, so that e.g. fragmented IP packets can
 | |
|      * be passed to the guest in one go later (instead of passing single
 | |
|      * fragments if there is only one receive buffer available).
 | |
|      */
 | |
|     timer_mod(dev->rxp_timer, qemu_clock_get_us(QEMU_CLOCK_VIRTUAL) + 500);
 | |
| 
 | |
|     return H_SUCCESS;
 | |
| }
 | |
| 
 | |
| static target_ulong h_send_logical_lan(PowerPCCPU *cpu,
 | |
|                                        sPAPRMachineState *spapr,
 | |
|                                        target_ulong opcode, target_ulong *args)
 | |
| {
 | |
|     target_ulong reg = args[0];
 | |
|     target_ulong *bufs = args + 1;
 | |
|     target_ulong continue_token = args[7];
 | |
|     VIOsPAPRDevice *sdev = spapr_vio_find_by_reg(spapr->vio_bus, reg);
 | |
|     VIOsPAPRVLANDevice *dev = VIO_SPAPR_VLAN_DEVICE(sdev);
 | |
|     unsigned total_len;
 | |
|     uint8_t *lbuf, *p;
 | |
|     int i, nbufs;
 | |
|     int ret;
 | |
| 
 | |
|     trace_spapr_vlan_h_send_logical_lan(reg, continue_token);
 | |
| 
 | |
|     if (!sdev) {
 | |
|         return H_PARAMETER;
 | |
|     }
 | |
| 
 | |
|     trace_spapr_vlan_h_send_logical_lan_rxbufs(dev->rx_bufs);
 | |
| 
 | |
|     if (!dev->isopen) {
 | |
|         return H_DROPPED;
 | |
|     }
 | |
| 
 | |
|     if (continue_token) {
 | |
|         return H_HARDWARE; /* FIXME actually handle this */
 | |
|     }
 | |
| 
 | |
|     total_len = 0;
 | |
|     for (i = 0; i < 6; i++) {
 | |
|         trace_spapr_vlan_h_send_logical_lan_buf_desc(bufs[i]);
 | |
|         if (!(bufs[i] & VLAN_BD_VALID)) {
 | |
|             break;
 | |
|         }
 | |
|         total_len += VLAN_BD_LEN(bufs[i]);
 | |
|     }
 | |
| 
 | |
|     nbufs = i;
 | |
|     trace_spapr_vlan_h_send_logical_lan_total(nbufs, total_len);
 | |
| 
 | |
|     if (total_len == 0) {
 | |
|         return H_SUCCESS;
 | |
|     }
 | |
| 
 | |
|     if (total_len > MAX_PACKET_SIZE) {
 | |
|         /* Don't let the guest force too large an allocation */
 | |
|         return H_RESOURCE;
 | |
|     }
 | |
| 
 | |
|     lbuf = alloca(total_len);
 | |
|     p = lbuf;
 | |
|     for (i = 0; i < nbufs; i++) {
 | |
|         ret = spapr_vio_dma_read(sdev, VLAN_BD_ADDR(bufs[i]),
 | |
|                                  p, VLAN_BD_LEN(bufs[i]));
 | |
|         if (ret < 0) {
 | |
|             return ret;
 | |
|         }
 | |
| 
 | |
|         p += VLAN_BD_LEN(bufs[i]);
 | |
|     }
 | |
| 
 | |
|     qemu_send_packet(qemu_get_queue(dev->nic), lbuf, total_len);
 | |
| 
 | |
|     return H_SUCCESS;
 | |
| }
 | |
| 
 | |
| static target_ulong h_multicast_ctrl(PowerPCCPU *cpu, sPAPRMachineState *spapr,
 | |
|                                      target_ulong opcode, target_ulong *args)
 | |
| {
 | |
|     target_ulong reg = args[0];
 | |
|     VIOsPAPRDevice *dev = spapr_vio_find_by_reg(spapr->vio_bus, reg);
 | |
| 
 | |
|     if (!dev) {
 | |
|         return H_PARAMETER;
 | |
|     }
 | |
| 
 | |
|     return H_SUCCESS;
 | |
| }
 | |
| 
 | |
| static target_ulong h_change_logical_lan_mac(PowerPCCPU *cpu,
 | |
|                                              sPAPRMachineState *spapr,
 | |
|                                              target_ulong opcode,
 | |
|                                              target_ulong *args)
 | |
| {
 | |
|     target_ulong reg = args[0];
 | |
|     target_ulong macaddr = args[1];
 | |
|     VIOsPAPRDevice *sdev = spapr_vio_find_by_reg(spapr->vio_bus, reg);
 | |
|     VIOsPAPRVLANDevice *dev = VIO_SPAPR_VLAN_DEVICE(sdev);
 | |
|     int i;
 | |
| 
 | |
|     for (i = 0; i < ETH_ALEN; i++) {
 | |
|         dev->nicconf.macaddr.a[ETH_ALEN - i - 1] = macaddr & 0xff;
 | |
|         macaddr >>= 8;
 | |
|     }
 | |
| 
 | |
|     qemu_format_nic_info_str(qemu_get_queue(dev->nic), dev->nicconf.macaddr.a);
 | |
| 
 | |
|     return H_SUCCESS;
 | |
| }
 | |
| 
 | |
| static Property spapr_vlan_properties[] = {
 | |
|     DEFINE_SPAPR_PROPERTIES(VIOsPAPRVLANDevice, sdev),
 | |
|     DEFINE_NIC_PROPERTIES(VIOsPAPRVLANDevice, nicconf),
 | |
|     DEFINE_PROP_BIT("use-rx-buffer-pools", VIOsPAPRVLANDevice,
 | |
|                     compat_flags, SPAPRVLAN_FLAG_RX_BUF_POOLS_BIT, true),
 | |
|     DEFINE_PROP_END_OF_LIST(),
 | |
| };
 | |
| 
 | |
| static bool spapr_vlan_rx_buffer_pools_needed(void *opaque)
 | |
| {
 | |
|     VIOsPAPRVLANDevice *dev = opaque;
 | |
| 
 | |
|     return (dev->compat_flags & SPAPRVLAN_FLAG_RX_BUF_POOLS) != 0;
 | |
| }
 | |
| 
 | |
| static const VMStateDescription vmstate_rx_buffer_pool = {
 | |
|     .name = "spapr_llan/rx_buffer_pool",
 | |
|     .version_id = 1,
 | |
|     .minimum_version_id = 1,
 | |
|     .needed = spapr_vlan_rx_buffer_pools_needed,
 | |
|     .fields = (VMStateField[]) {
 | |
|         VMSTATE_INT32(bufsize, RxBufPool),
 | |
|         VMSTATE_INT32(count, RxBufPool),
 | |
|         VMSTATE_UINT64_ARRAY(bds, RxBufPool, RX_POOL_MAX_BDS),
 | |
|         VMSTATE_END_OF_LIST()
 | |
|     }
 | |
| };
 | |
| 
 | |
| static const VMStateDescription vmstate_rx_pools = {
 | |
|     .name = "spapr_llan/rx_pools",
 | |
|     .version_id = 1,
 | |
|     .minimum_version_id = 1,
 | |
|     .needed = spapr_vlan_rx_buffer_pools_needed,
 | |
|     .fields = (VMStateField[]) {
 | |
|         VMSTATE_ARRAY_OF_POINTER_TO_STRUCT(rx_pool, VIOsPAPRVLANDevice,
 | |
|                                            RX_MAX_POOLS, 1,
 | |
|                                            vmstate_rx_buffer_pool, RxBufPool),
 | |
|         VMSTATE_END_OF_LIST()
 | |
|     }
 | |
| };
 | |
| 
 | |
| static const VMStateDescription vmstate_spapr_llan = {
 | |
|     .name = "spapr_llan",
 | |
|     .version_id = 1,
 | |
|     .minimum_version_id = 1,
 | |
|     .fields = (VMStateField[]) {
 | |
|         VMSTATE_SPAPR_VIO(sdev, VIOsPAPRVLANDevice),
 | |
|         /* LLAN state */
 | |
|         VMSTATE_BOOL(isopen, VIOsPAPRVLANDevice),
 | |
|         VMSTATE_UINT64(buf_list, VIOsPAPRVLANDevice),
 | |
|         VMSTATE_UINT32(add_buf_ptr, VIOsPAPRVLANDevice),
 | |
|         VMSTATE_UINT32(use_buf_ptr, VIOsPAPRVLANDevice),
 | |
|         VMSTATE_UINT32(rx_bufs, VIOsPAPRVLANDevice),
 | |
|         VMSTATE_UINT64(rxq_ptr, VIOsPAPRVLANDevice),
 | |
| 
 | |
|         VMSTATE_END_OF_LIST()
 | |
|     },
 | |
|     .subsections = (const VMStateDescription * []) {
 | |
|         &vmstate_rx_pools,
 | |
|         NULL
 | |
|     }
 | |
| };
 | |
| 
 | |
| static void spapr_vlan_class_init(ObjectClass *klass, void *data)
 | |
| {
 | |
|     DeviceClass *dc = DEVICE_CLASS(klass);
 | |
|     VIOsPAPRDeviceClass *k = VIO_SPAPR_DEVICE_CLASS(klass);
 | |
| 
 | |
|     k->realize = spapr_vlan_realize;
 | |
|     k->reset = spapr_vlan_reset;
 | |
|     k->devnode = spapr_vlan_devnode;
 | |
|     k->dt_name = "l-lan";
 | |
|     k->dt_type = "network";
 | |
|     k->dt_compatible = "IBM,l-lan";
 | |
|     k->signal_mask = 0x1;
 | |
|     set_bit(DEVICE_CATEGORY_NETWORK, dc->categories);
 | |
|     dc->props = spapr_vlan_properties;
 | |
|     k->rtce_window_size = 0x10000000;
 | |
|     dc->vmsd = &vmstate_spapr_llan;
 | |
| }
 | |
| 
 | |
| static const TypeInfo spapr_vlan_info = {
 | |
|     .name          = TYPE_VIO_SPAPR_VLAN_DEVICE,
 | |
|     .parent        = TYPE_VIO_SPAPR_DEVICE,
 | |
|     .instance_size = sizeof(VIOsPAPRVLANDevice),
 | |
|     .class_init    = spapr_vlan_class_init,
 | |
|     .instance_init = spapr_vlan_instance_init,
 | |
|     .instance_finalize = spapr_vlan_instance_finalize,
 | |
| };
 | |
| 
 | |
| static void spapr_vlan_register_types(void)
 | |
| {
 | |
|     spapr_register_hypercall(H_REGISTER_LOGICAL_LAN, h_register_logical_lan);
 | |
|     spapr_register_hypercall(H_FREE_LOGICAL_LAN, h_free_logical_lan);
 | |
|     spapr_register_hypercall(H_SEND_LOGICAL_LAN, h_send_logical_lan);
 | |
|     spapr_register_hypercall(H_ADD_LOGICAL_LAN_BUFFER,
 | |
|                              h_add_logical_lan_buffer);
 | |
|     spapr_register_hypercall(H_MULTICAST_CTRL, h_multicast_ctrl);
 | |
|     spapr_register_hypercall(H_CHANGE_LOGICAL_LAN_MAC,
 | |
|                              h_change_logical_lan_mac);
 | |
|     type_register_static(&spapr_vlan_info);
 | |
| }
 | |
| 
 | |
| type_init(spapr_vlan_register_types)
 |